REPAIR MAINT OF EXTERNAL ELECTRIC SUPPLY, WATER SUPPLY AND MISC EM WORKS AT MH AND P1 OFFRS MESS UNDER GE JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose soil including forming sides and bottom surface to required levels / slops / gradients and getting out complete.

Returning, filling in trenches including spreading leveling, watering well, ramming in layers n.exc 25 cm in soft / loose soil complete.

Removing excavated material to a distance n exc 50 m and depositing at a leve n exc 1.5 m above starting point complete.

S&F in repairs tubes medium grade galvanised with required all new fitting ISI marked fixed on wall/floor with fixing arrangement of following sizes:- (a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm bore

(e) 50 mm bore

(f) 80 mm bore

(g) 100 mm bore

Supply and fix of gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes of following sizes:- (a) 15 mm Bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm bore

(e) 50 mm bore

Construction of brick masonry valve pit chamber with 3 mm thick MS sheet cover and 40 x 40 x 6 mm angle iron frame embedded in PCC coping 1:3:6 type C-1 using 20 mm graded stone aggregates with locking arrangements of size 1200 mm x 1200 mm x1200 mm depth (internal size), brick work in cement mortar 1:4 using sub class ‘B’ (old size) bricks, internal walls plastered with 15 mm thick cement mortar 1:4 and finishing the surface even and smooth using extra cement, 40 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in coping, PCC 1:4:8 type D-2 using 40 mm graded stone aggregates in foundation 75 mm thick with and including necessary excavation & earth work in soft / loose soil complete.

Identification/repair/rectification of leakage in GI pipe line upto 100 mm bore by cutting and removing the leaking portion and providing suitable fitting, joints as required. Note - Excavation, earth work as required shall be measured separately under relevant item of Schedule.

Renewal of cast iron sluice valve class PN-1.0 ISI marked, both ends flanged, stainless steel spindle, with iron wheel and necessary jointing materials, nuts & bolts, washers etc for making two flanged joints of following sizes as required :- (a) 80 mm bore

(b) 100 mm bore

Supply & Fix in replacement of single type fire hydrant landing valve type A Single headed outlet of 63mm dia incl rubber gasket, nut & bolts complete all as specified and directed.

Supply & Fix in replacement of double type fire hydrant landing valve type A Double headed outlet of 63mm dia incl rubber gasket, nut & bolts complete all as specified and directed.

Supply and Fix in replacement of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short all as specified and directed

Supply and fix in replacement of 63mm dia 15 mtr long hose confirming to IS 636 complete with male and female coupling complete all as specified and directed.

Supply and Fix in replacement of Hose box Out door type of suitable size made out of minimum 1mm thick MS sheet with double door with 4mm thick plain sheet glasses and door frame made of 1.2 mm thick MS sheet painted fire red outside and brilliant white inside complete fixing nut bolts etc all as specified and directed Note For item No 09 to 13 Contractor should visit the site before quating the tender and any other misc items required for complete the job are deemed to be incl in to rate quated by contractor.

Supply and Fix in replacement cast iron Foot valve of size 80mm dia with rubber gasket and nut, bolts complete all as specified and directed .

Cleaning of underground sump, removing sludge / dirt / sand by means of manual wash out, outlet cleaning from inside with bleached water and washing with sodium hydrochloride liquid, drying and applying one coat of lime wash internally and spraying anti bacteria liquid, writing date of cleaning on outer wall of sump with white paint on black base for 100000 litre capacity complete.

Cleaning of RCC Over Head Reservoir (OHR) approximately 18 mtr staging, 20000 Gln capacity, removing sludge / dirt / sand by means of manual wash out, outlet cleaning the overhead reservoir from inside with bleached water and washing with sodium hydrochloride liquid, drying and applying one coat of lime wash internally and spraying anti bacteria liquid, writing date of cleaning on outer wall of overhead reservoir with white paint on black base complete.

S&F Steel tubes ISI marked light grade galvanised with all fittings fixed to walls / poles / laid in road crossing etc as required of following sizes:- (a) 40 mm bore

(b) 80 mm bore

M&L for steel tubular swaged pole 8.5 m long type 410 SP-22 with cast iron or welded MS base plate including nuts / bolts / washers etc conforming to IS-2713 (Part I to III) of 1980 and comprising of following :- (a) Excavation in post holes in any type of soil not exceeding 0.5 cum each, getting out, returning filling in and ramming earth in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface. (b) PCC (1:4:8) type D2 using 40 mm graded stone aggregate in base (0.60 m dia x 0.15 m height). (c) PCC (1:3:6) type C2 using 40 mm graded stone aggregate in foundation filling (0.60 m dia x 1.5 m height). (d) PCC (1:2:4) type C2 using 40 mm graded stone aggregate in coping (0.6 m dia x 0.45 m height). (e) Pole cap 0.30 m long externally fitted on pole top duly welded with a light grade ISI marked 40 mm GI pipe bracket 1.5 m long for mounting street light fitting. (f) Painting with aluminium paint one under coat, one finishing coat over a coat of red oxide primer and making alternate colour bands of black & white colours in 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint complete.

Supplying, laying or fixing on wall through proper clamping or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable of following sizes :- (a) 6 sqmm 2 core

(b) 16 sqmm 4 core

(c) 25 sqmm 4 core

(d) 50 sqmm 3.5 core

(e) 70 sqmm 3.5 core

(f) 95 sqmm 3.5 core

(g) 120 sqmm 3.5 core

(h) 300 sqmm 3.5 core

Labour and tools for breaking of PCC (for taking out PCC poles) and removing broken PCC outside cantonment area to a distance beyond 5 km but not exceeding 15 m and depositing at a level not exceeding 1.5 m above the starting point complete.

Dismantling concrete poles/strut, any size and setting aside in low lying area outside the cantonment.

Supplying and making indoor termination heat shrinkable type for 1.1 KV grade XLPE cable of following sizes:- (a) 10 sqmm 2 core.

(b) 16 sqmm 4 core.

(c) 25 sqmm 4 core to 50 sqmm 3.5 core.

(d) 70 to 120 sqmm 3.5 core.

Supplying and making in renewal straight through joint heat shrinkable type for 1.1 KV grade XLPE cable of following sizes:- (a) 25 sqmm 4 core to 50 sqmm 3.5 core.

(b) 70 to 150 sqmm 3.5 core.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

Taking out old u/s XLPE cables of following sizes:- (a) 10 sqmm 2 core, 1.1 KV

(b) 16 to 25 sqmm 4 core, 1.1 KV

(c) 50 to 300 sqmm 3.5 core, 1.1 KV

Taking down old u/s GI protection pipe of sizes 40 to 80 mm bore.

Labour & tools for horizontal boring through road / path / floor for passing UG cables as required.

M&L for filtration / dehydration of insulating oil of transformer in position to achieve dielectric strength 50 KV or above (when tested with 2.5 mm gap electrode) complete.

Renewal of MCCB 125 amp, 4 pole, 16 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420016 or equivalent in Schneideror equivalent make in appx A as approved.

Renewal of MCCB 160 amp, 4 pole, 16 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420017 or equivalent in Schneider or equivalent make in appx A as approved.

Renewal of MCCB 250 amp, 4 pole, 24 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420219 or equivalent in Schneider or equivalent make in appx A as approved.

Renewal of MCCB 63 amp, 4 pole, Icu 16 KA (Ics=100% Icu), electronic release and adjustable between 40% to 100% with spreader links on both sides as per Legrand cat ref no. 420013 or equivalent in Schneider or equivalent make in appx A as approved.

Renewal of MCCB 400 amp, 4 pole, Icu 36 KA (Ics=100% Icu), electronic release and adjustable between 40% to 100% with spreader links on both sides as per Legrand cat ref no. 422063 or equivalent in Schneider or equivalent make in appx A as approved.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe dia 80 mm & inner pipe dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth strip 32 x 6 mm, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 2.0 ohm complete. (Note - GI strip size 32x6 mm upto 7.5 m included in the item).

Renewal of transformer breather assembly oil seal type made of heavy duty transparent plastic body having top & bottom cover made of aluminium or mild steel of capacity 500 grams filled with silica gel complete.

M&L for topping up of deficient oil level of transformers with filtered and dehydrated transformer oil (conforming to IS: 335) and to withstand dielectric strength 60 KV or above (when tested with 2.5 mm gap electrode) complete. Make - Savita / Powerlink / Poweroil or equivalent as approved by GE

Supplying and fixing in renewal HV brass set stem of 12 KV grade suitable for transformer of capacitie 200 KVA to 400 KVA as required.

Supplying and fixing in renewal LV brass set stem of 1.1 KV grade suitable for transformer of capacities 200 KVA to 400 KVA as required.

Taking down any type HPSV fittings and Supply, installation, testing and commissioning of integral driver LED street light with a nominal system lumen output of 7200 lumens and a minimum system efficacy of 90 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours before reaching at L70. The luminaire should have cool white colour temperature (CCT > 5000K) and a CRI >70. The luminaire shall meet IP 66 rating & IK05 rating with THD < 20% and PF > 0.9. The luminaire housing should be made of pressure die cast aluminium with a flat glass optical cover. The total power consumption should not exceed 72W including driver. Make - Philips Greenline cat ref BRP410 LED CW 072 MR FG S1 PSU GRor equivalent make in appx A as approved.

Renewal of street light bracket made of GI pipe light grade bend in shape of 40 mm dia, 1.5 m long and clamped with 2 pairs of 40 x 6 mm flat iron clamps, nuts / bolts / washers & painted with 2 coats of aluminium paint over a coat of red oxide primer on clamps complete.

M&L for Painting of street light swaged poles 8.5 m / 9.0 long including street light brackets/clamps etc with best quality aluminium paint, making alternate black & white colour bands of 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint and writing pole numbers in black colour on yellow base complete.

S&F thermoplastic, IP65 cable junction box of size 200 x 160 x 98 mm with metric knockouts on all sides for cable entry or Secure duly fitted with followings:- (a) DIN Rail (35 mm) - 1 No (b) ELMEX or equivalent make connector of 10 sqmm - 4 Nos (c) ELMEX or equivalent make end plate - 1 No (d) ELMEX or equivalent make end clamps - 2 Nos (e) MCB SP 6 amp, 10 KA, 'C' series.

Supplying, installation, testing & commissioning CPRI approved outdoor cubical type LT feeder pillar box suitable for 415V, 3 phase, 4 wire 50 Hz, AC supply system with short circuit withstand capacity 35 MVA for 1 second, IP 54 protection, fabricated in compartmentalized design from CRCA sheet 3.15 mm thick for outer shell and 2.0 mm thick for inner shell duly powder coated through seven tank treatment process with pure polyester Siemens grey structural RAL 7032 shade, totally enclosed, dust, weather & vermin proof, having TPN copper bus bars of rating 1.5 times that of controlling MCCB supported on 'F' class SMC insulators, bottom base channel of MS section not less than 75 mm x 40 mm x 5 mm thick, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos earth stud, solid connections from main bus bar to switchgears with required size copper bus bars and control wiring with minimum 1.5 sqmm PVC insulated copper conductor cable, cable alleys, cable gland plates including digital multi functional meter to measure voltage, current, PF & frequency and mounted on by making suitable PCC foundation, necessary inter connection including following controls :- Incoming:- One number MCCB 160 amp, 4 pole, Ics 25 KA, 415 volts, 50 Hz with electronic release adjustable between 70% to 100% against overload setting as per Legrand cat ref no. 420056 or equivalent in Schneider or Hager as approved. Outgoing:- (i) Four numbers MCCB 63 amp, 3 pole, Ics 25 KA, 415 volts, 50 Hz, thermally adjustable between 70% to 100% against overload setting as per Legrand cat ref no. 420003 or equivalent in Schneider or Hager as approved.

General servicing of DG Set 25 KVA (Make - Kirloskar installed at STP plant jadunath Vihar including adjustment of tappet cover & replacement of gasket and following spares as per existing make :-

(a) Diesel fitter

(b) Lubricating oil filter

(c) Radiator hose pipe set

(d) Fan belt.

(e) Air filter element

General servicing of DG Set 30 KVA (Make - Kirloskar installed at P-1 Officers mess including adjustment of tappet cover & replacement of gasket and following spares as per existing make :-

(a) Diesel fitter

(b) Lubricating oil filter

(c) Radiator hose pipe set

(d) Fan belt.

(e) Air filter element

General servicing of DG Set 62.5 KVA (Make - Kirloskar installed at MH Jaipur and P-1 Officers mess and MH Jaipur including adjustment of tappet cover & replacement of gasket and following spares as per existing make :-

(a) Diesel fitter

(b) Lubricating oil filter

(c) Radiator hose pipe set

(d) Fan belt.

(e) Air filter element

General servicing of DG Set 160 KVA (Make - Kirloskar) installed at MH Jaipur including adjustment of tappet cover & replacement of gasket and following spares as per existing make:-

(a) Diesel filter

(b) Lubricating oil filter

(c ) Radiator hose pipe

(d) Fan belt

(e) Air filter element

General servicing of DG Set 250 KVA (Make - Kirloskar) installed at MH Jaipur including adjustment of tappet cover & replacement of gasket and following spares as per existing make:-

(a) Diesel filter

(b) Lubricating oil filter

(c) Radiator hose pipe set

(d) Fan belt

(e) Carbon brush

General servicing of DG Set 250 KVA (Make - Cummins) installed at MH Jaipur including adjustment of tappet cover & replacement of gasket and following spares as per existing make:-

(a) Diesel filter

(b) Lubricating oil filter

(c) Radiator hose pipe set

(d) Fan belt

(e) Carbon brush

Supply and filling in renewal or in topping up engine oil SAE grade 20W-40 for DG Set of capacity 62.5 to 250 KVA as required.

M&L for replacement of water coolent in radiator of DG Set TVS Girling/volvo line or equivelent make as approved.

Cleaning of the fuel tank of DG sets with kerosene oil after decaning the diesel of following capacities:- (a) 30 KVA

Dismantling and removing of water pump assesmbly from the engine and repairing / overhauling the same by renewal of worn components like bearing, impeller, bushes, oil seal, water seal, gasket etc. reassembling, refixing and testing for any DG Set upto 250 KVA capacity complete.

Repair/overhauling of dynamo/charging alternator including replacement of carbon, brush holder, spring, commutator/slipring assembly bearing, regulator etc. of any make, any type and any capacity complete.

Servicing/repairing of AMF system built in with DG set of any capacity including cleaning resetting / adjustment of relays, calibration of time delay relays, checking and replacing u/s diodes, resistors etc as required.

M&L for servicing of alternator including cleaning of field and armature winding, varnishing and drying, decarbonisation & rubbing of slip ring assembly, checking and calibrating excitation system for alternators of 30 / 62.5 / 160 / 250 KVA complete.

Supplying and fixing in repairs oil pressure pipe suitable for DG Set of 30 KVA to 250 KVA capacity as required.

Supplying and fixing in renewal sealed maintenance free lead acid battery 12 volt, 150 AH for DG set as required.

Supplying and fixing in renewal sealed maintenance free lead acid battery 12 volt, 180 AH for DG set as required.

Taking down carefully aluminum or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&Lfor rewiring point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into concealed conduit and terminated in modular metal flush boxes 1.0mm thick for mounting modular cover plate & frame, switches, sockets, fan regulators as required for one light point controlled by one switch.

All as per item No. 02 here-in-before but one fan point controlled by one switch.

All as per item No. 02 here-in-before but one light point controlled by two, two way switch.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 02 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 02 here-in-before but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into into existing concealed conduit and terminated in modular metal flush boxes for mounting modular cover plate & frame for one socket point 16 Amps controlled by one switch.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators one light point controlled by one switch.

All as per item No. 09 above but one light point controlled by two, two way switch.

All as per item No. 09 above but one fan point controlled by one switch.

All as per item No. 09 above but one socket outlet 6 Amps controled by one switch on the same board with other switches.

All as per item No. 09 above but one socket outlet 6 Amps controlled by one switch on independent board.

All as per item No. 09 above but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets for one 16 Amps socket outlet point controlled by one switch on independent board.

M&Lfor rewiring point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into concealed conduit and terminated ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators one light point controlled by one switch.

All as per item No. 16 here-in-before but one fan point controlled by one switch.

All as per item No. 16 here-in-before but one light point controlled by two, two way switch.

All as per item No. 16 here-in-before but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No. 16 here-in-before but one socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No. 16 here-in-before but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn concealed conduit and terminatedivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, for one socket point 16 Amps controlled by one switch.

S&F angle holder, insulated polycarbonate body with back plate complete.

S&F switch piano flush button single pole one way 6 Amp complete.

S&F switch piano flush button single pole one way 16 Amp complete.

S&F flush type, 6 Amp, single pole, two way complete.

S&F bell push, flush type, 6 Amps 240 volts complete.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts.

S&F switch modular 2 way 6 Amps, 230 volts, 1 module.

S&F modular bell push 6 Amps 1 module.

S & F modular blanking plate 1 module.

S&F modular whiter cover plate with frame 1/2 module.

S&F modular whiter cover plate with frame 3 module.

S&F modular whiter cover plate with frame 4 module.

S&F modular whiter cover plate with frame 6 module.

S&F modular whiter cover plate with frame 8 module.

S&F Modular metal flush box 1/2 module

S&F Modular metal flush box 3 module

S&F Modular metal flush box 4 module

S&F Modular metal flush box 6 module

S&F Modular metal flush box 8 module

S&F door bell AC 240 volts, single pole complete.

S&F in replacemet switch piano flush button single pole one way 6 Amp complete.

S&F in replacement switch piano flush button single pole one way 16 Amp complete.

S&F in replacement bed switch flush type, 6 Amp, single pole, one way complete.

S&Fin replacement bell push, flush type, 6 Amps 240 volts complete.

S&F in replacement socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F in replacement socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F in replacement switch modular 1 way 6 Amps, 230 volts, 1 module.

S&F in replacement modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts.

S&F in replacement modular switch 1 way 16 Amps, 230 volts, 1 module.

S&F in replacement modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.

S&F in replacement modular fan regulator 120 watts, 2-module AC 230 Volts.

S&F in replacement switch modular 2 way 6 Amps, 230 volts, 1 module.

S&F in replacement modular bell push 6 Amps 1 module.

S & F in replacement modular blanking plate 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F in replacement modular whiter cover plate with frame and metal flush box 1/2 module.

S&F in replacementin replacement modular whiter cover plate with frame and metal flush box 3 module.

S&F in replacement modular whiter cover plate with frame and metal flush box 4 module.

S&F in replacement modular whiter cover plate with frame and metal flush box 6 module.

S&F in replacement modular whiter cover plate with frame and metal flush box 8 module.

S&F ceiling rose 3 plates polycarbonate body complete.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x4Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit.

All as per item No. 70 above but 2x6 Sqmm + 1x6 Sqmm earth in 20 mm dia conduit.

All as per item No. 70 above but 2x10 Sqmm + 1x10 Sqmm earth in 25mm dia conduit.

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point and including 15mm bore light grade G.I. protection pipe (upto 7.5 mtr from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz Make Legrand Cat No. 4200 16 or equivalent in Hager/Schneider. Outgoing : (a) Single phase tamper proof meter with optical port 10 to 60 Amps-04 Nos. Make : Secure Saral or equivalent in HPL/L&T. (b) MCB DP 63 Amps 'C' series 10 KA AC 240 volts-05 Nos. Make : Legrand Cat Ref No. 404618 to 40408620 or equivalent in Hager/Schneider as approved

S&F tamper proof static single phase 2 wire direct reading energy meter (whole current) with LED display, (10-60) Amps, 240 volts AC supply, accuracy class 1.0 having an optical/RS 232 port to download the stored data by an external MRI instrument. Make : Secure icredit 350 or equivalent in L&T/HPL as approved.

S&F louvers only for 300 mm exhaust fan of metallic body as approved.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways. Make : Legrand Cat Ref No. 507610 or Schneider Cat No. A9HSND04 or equivalent make in appx A as approved.

All as per item No. 77 above but SPN, 240 volts, 8 ways. Make : Legrand Cat Ref No. 507612 or Schneider Cat No. A9HSND12 or equivalent make in appx A as approved.

All as per item No. 77 above but SPN, 240 volts, 12 ways. Make : Legrand Cat Ref No. 507612 or Schneider Cat No. A9HSND12 or equivalent make in appx A as approved.

All as per item No. 77 above but SPN, 240 volts, 2 ways. Make : Legrand Cat Ref No. 507791 or equivalent make in appx A as approved.

S&F MCCB four pole, 125 Amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs as required. Make : Legrand Cat Ref No. 420016or equivalent make in appx A as approved.

S&F MCB distribution board, tripple pole and neutral, powder coated CRCA steel sheet, suitable for MCCB incomer upto 160 Amps, 4 way 415 volts, degree of protection IP 43, IK-09 with reversible double door, recess mounted, having 250 Amps insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make : Legrand Cat Ref No. 507745 or equivalent make in appx A as approved.

S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand Cat Ref No. 508587 to 408595 or equivalent make in appx A as approved.

All as per item No. 83 above but double pole 10 to 40 Amps.Make : Legrand Cat Ref No. 408631 to to 408637 or equivalent make in appx A as approved.

All as per item No. 83 above but double pole 40 to 63 Amps.Make : Legrand Cat Ref No. 404618 to 40408620 or equivalent make in appx A as approved.

S&F in repair LED (1.2M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2500 lumens/22 watt at a minimum system efficacy of 4000 lumen per 22 watt and total power consumption not more than 40 watt including driver. It has a rated system life time of 25000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete.Make : Philips Cat Part No : BN 021LED 25S 6500 PSU GR S1

S&F in repair LED fixture 10 watt having lumen output 100 lumens per watt including connection. Make : Philips Cat Part Ref No : BN 021LED 25S 6500 PSU GR S1

S&F in repair LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per specified. Make : Philips Cat Ref No . WT 202W LED 6S PSU S2 PC or equivalent make in appx A as approved.

Supply and fixing in replacement 8 watts wall mounted LED decorative luminary with standard accessories and lamp inclduing fixing the same with existing wall. Make : Havells Cat Part No. LHJE01106499 or equivalent make in appx A as approved.

S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens 36 Watts having constant current electronic driver duly connected with 0.5 Sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire. Make - Philips cat ref no. RC240B LED33S- 6500 PSU OD WH or equivalent make in appx A as approved.

S&F in repair recess mounted LED panel of size 220mmx220mm, 12 watts 1500 lumen output having luminous efficacy >85 lm/W, 6500K, 50Hz, p.f. >0.90, CRI80, THD <30%, 25000 burning hours including making connection. Make : Philips Cat Part No SM 260C LD 12S-6500 PSU WH or equivalent make in appx A as approved.

S&F in repair white power cotated CRCA full glow recess mounted LED bacalit panel light fitting of size 305mmx1220 mm (1' x4') 36 watt having constant current electronic driver duly connected with 0.5 Sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire. Make : C&S Cat Ref No CYGNUS-C/36W/1 x 4 W or equivalent make in appx A as approved.

Supply and fix in replacement LED luminary 35 watts IP 66 5700K outdoor luminary with standard accessories and making connection with existing light point with 3 core 1.0 Sqmm PVC insulated multistranded copper conductor wire including fixing the same on existing Gi bracket complete. Make Philips Cat Ref No . BRP050 LED 036 CW RI MP PCSI PSU GR or equivalent make in appx A as approved.

Supply and fixing in replacement GI bracket made out of 32mm dia GI medium grade pipe of length 90 Cms long bend shape and size as per site requirement including 02 Nos of MS flat 40x5mm 200mm long bend to shape as required to fix the G bracket with existing wall using 04 Nos of MS fastener 10mmx100mm long with nut, bolts and washers complete.

Supply and fix in replacement 10 watts LED T-lamp B-22 base (warm white/Golden Yellow) 100 lumens, AC 220 volts . Make : Philips Part No. 9290018611 or equivalent make in appx A as approved.

Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting complete.

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core.

S&F steel tubes 40 mm bore light grade ISI marked with medium grade fittings for cable protection as required.

M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall build on cement mortar 1:4 and 2 coats of white/colour washing to match the surface complete.

Rewinding the motor of table / pedestal / cabin fan 400 mm of all types and make with super enameled copper wire of existing gauge and approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of exhaust fan 375/450 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Opening ceiling fan of any make any sweep for overhauling, providing fresh clean lubricating oil / grease including minor repairs, renewal of split pins, re-assembling and testing for satisfactory operation complete. (Note - Any u/s parts as renewed shall be measured separately).

Rewinding the motor of wall mount air circulator fan of size 600 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete. Make - SKF (6201 to 6203) or equivalent in TATA as approved.

Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 2.5 mfd / 440V / PLWW / 25x45 or equivalent in Epcos / Usha as approved.

Renewal of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 4.0 mfd / 440V / PLWW / 28x52 or equivalent in Epcos / Usha as approved.

Renewal of self lubricating bush of gun metal of same type for ceiling fan / exhaust fan as required.

Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required.

M&L for painting of table / pedestal / cabin fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No with black paint as required.

M&L for spray painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No in a height of minimum 30 mm with black paint as required .

M&L for scraping completely fresh air / exhaust fan of any sweep and make and providing with two or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade over a coat of red oxide primer and polishing with rubbing compound and wax polish and writing MES No with approved colour paint as required.

Transportation of ceiling fan / exhaust fan from store to site or site to store as required.

Installing, testing and commissioning repaired ceiling fans at any location in cantonment Jaipur including connection complete.

Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.

Renewal of PVC canopy suitable for ceiling fan of any size and make as required.

Renewal of down rod of ceiling fan made of MS pipe 15 mm bore including cutting, threading, painting etc as 30 cm to 60 Cm required.

M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete.

Renewal of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.

Supply and fix in replacement PVC fresh air fan 250 mm sweep with louvers, fan motor and accessories complete including making connections.

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required. Make : Havells Model No. ES- 50 or equivalent make in appx A as approved.

Taking down carefully storage type water heater (geyser) any make and capacity from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and repair complete. (Note - Repair work shall be measured separately).

Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / wahers / gaskets / fusible plug etc wherever required and minor items not included separately in schedule. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).

Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Supply only heating element 2.0 KW/1.5 KW , 230 volts, ISI marked suitable for 50/25 litre capacity geysers of any type as required.

Suppply only thermostat ISI marked suitable for 25/50 litres geysers as required.

Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.

Suppply only stainless steel inner tank suitable for 50 litre capacity geysers housing complete.

Repair of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete.

Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.

Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.

M&L for painting of geyser 25/50 litre with two coats of synthetic enameled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete.

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete.

S&F in replacement LED post top light 25 Watts in spherical shape polycarbonate diffuser & IP 65 including recessing mounting pipe of size not less than 32mm dia in existing PCC/brick gate post using CM in 1:4 and making connection using 3 core 0.5 Sq.mm PVC insulated cable complete. Make : Bajaj Cat Part No. BLPTSP 25W LED or equivalent make in appx A as approved.

Renewal of Indipendent,constant current LED control Gear input voltage range: 140-270 V, suitable for 36 watt 1' x4' white power cotated CRCA full glow recess mounting LED backlite panel. Make : Havells Cat Ref No : LSSCRX1791 or equivalent make in appx A as approved.

S&F in replacement of switch socket combined 20A & 10 A, 240V 50 Hz, combined Unit box with 2 fixing hole all as specified. Make : Anchor, Cat Ref No 14310 or equivalent make in appx A as approved.

S&F in replacement of switch socket combined 6A, 2 in 1 S.S Comb, with Box 240V 50 Hz, with 2 fixing hole all as specified. Make : Anchor, Cat Ref No 50508 or equivalent make in appx A as approved.

Renewal of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete.

Schedule of Credit

DIVYA ASSOCIATES

M/S TRADE LINKERS