GE/CHM-89/2022-2023 SPECIAL REPAIR TO FAST TRACK ACCN, ADDN ALTN TO BLDG NO P-50 AND PARKING SHED UNDER AGE B/R I AT CHANDIMANDIR

Amount

Taking down wooden chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

Taking down wooden chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.

100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.

Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.

Steel window as in repair, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.

All as per serial item No 7 hereinbefore but without glazing bar.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.

Demolition of cement concrete on any description and in any position (in sunken portion) or not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m form the sie and depositing where directed complete all as specified and directed.

Supply and fix PVC 50mm dia spout pipe 450mm long and embedded in PCC 1:2:4 at bottom slab level complete all as specified and directed.

Water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Pond curing of sunken portion for minimum of 48 hours. (e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface. (f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound.

Material and labour providing protection layer applying 15mm thick cement plaster in cement mortar 1:4 (cement & coarse sand) admixing Fosroc Conplast WL @ 125ml per 50kg cement bag complete all as specified and directed.

Material and labour hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 25 cm watered & rammed to a true surface with broken bricks complete all as specified.

Material and labour plain cement concrete 1:2:4 type B-1 uisng 20mm graded stone aggregate 75mm thick for floor, admixing Fosroc Conplast WL @ 125ml per 50Kg cement bag including top coating using Fosroc Nitobond SBR, mix ratio 1:1½ all in complete as per manufactures specifications complete all as specified & directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed.

Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 250mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Coloured vitrified ceramic tiles, coloured, jointless, 10mm thick (square ) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.

15-18mm thick black granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 20mm thick in cement mortar 1:4 complete all as specified and directed.

Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

15mm thick rendering on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.

5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng

Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in Cement and Sand mortar 1:4 complete all as specified and directed

Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Three coats of white wash on ceiling / chajja surfaces including preparation of new surfaces complete all as specified and directed

Two coats of oil bound distemper on new plastered wall surface over a coat of wall primer complete all as specified and directed.

Applying wall care putty, two coats to entire surface not less than 2mm thick, over a coat of alkali resistant cement based primer on new wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

Complete removal of existing treatment of any type / description viz distemper, white wash etc from existing plastered / unplastered surface of bldg with mechanical means / grinder completely and applying wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth complete all as specified and directed.

Preparation of old existing plastered / unplastered surface and applying two coats of exterior emulsion paint on existing surface of building (all as per manufactures instructions) with and including necessary scafolding and safety arrangements complete all as specified and directed.

Preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.

Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.

Complete removal of existing treatment of any type / description viz distemper, white wash etc from existing plastered / unplastered surface of bldg with mechanical means / grinder completely and applying wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth and applying two coats of oil bound distemper over one coat of interior wall primer complete all as specified and directed.

4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

5.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed.

4mm thick tinted/frosted sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels n exc 0.5 Square metre in each pane, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Taking up or down steel tubing and connections 15mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed

Taking up or down steel tubing and connections 20mm bore from walls, floors etc including cutting chases and making good in cement mortar 1:3 complete all as specified and directed

Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe fixed in repair complete all as specified and directed.

Bib taps, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Bib taps, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Bib taps, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Angular stop cock, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.

Stop valve (concealed type), cast copper clloychromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Cast copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges, complete all as specified and directed.

32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.

32mm/40mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc fixed as in repair complete all as specified & directed by Engineer-in-charge.

Chromium plated fancy type over head shower dia 100mm round shape multi flow (ABS body chrome plated with grey face plate) with rubit cleaning system shower rose fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed.

Glass shelf of size 500 x 125mm Chromium plated fixed with chromium plated steel screws and plastic cleats, fixed as in repair complete all as specified and directed.

Bath cabinet of size 400mm x 500mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed.

PVC connection 450mm long for cold / hot water heavy duty made out of double layer Nylon & wire fabric at pressure 6 Kg /cm both side, CP brass 15mm bore coupling or nuts complete all a specified and directed.

Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 75-100 mm bore, at any location, complete all as specified.

PVC (SWR) pipe, Type B, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

UPVC pipe, (SCH-40) 100mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

PVC (SWR) pipe, Type B, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

110mm bore PVC (SWR) bends any radius complete all as specified and directed.

75mm bore PVC (SWR) bends any radius complete all as specified and directed.

110 mm or 75 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed.

110 mm dia PVC (SWR) WC connector complete all as specified and directed.

110 mm dia PVC (SWR) junction single ( single T ) equal or unequal complete all as specified and directed.

PVC (SWR) rain water pipe, Type B, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, fixed as in repair complete all as specified & directed by Engineer-in-charge.

110mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified & directed by Engineer-in-charge.

Grating doom 100mm dia of PTMT (Minimum weight 40gms), with waste hole fixed as in repair complete all as specified & directed by Engineer-in-charge.

Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor, fixed as in repair complete all as specified & directed by Engineer-in-charge.

PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.

Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, fixed as in repair, complete all as specified and directed.

Wall mixer 3-in-1 with provision of bath hand shower and over head shower complee 115mm long bend pipe connecting leg and wall flange cast copper alloy, fancy type, chroumium plated suitable for 15mm bore GI bore pipe fixed as in repair complete all as specified and directed.

Central hole Basin Mixer, with popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.

sink mixer one hole with swivel casted spout ( table mounted model), c450mm long braided hoses, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified & directed

Hand shower (health faucet), chromium plated for 15mm bore with fittings and 1 metre long flexible tube and wall hook, fixed as in repair complete all as specified and directed.

Toilet paper holder, cast copper alloy, chromium plated, fixed in position in repairs, complete all as specified and directed.

Soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

18mm thick solid PVC shutter made out of 18mm celuka printed and UV coated sheet cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25" Mild steel screw to the frame with the channel in and including hinge. Handles . complete the work according directions of Engineer-in-Charge, fixed as in repair complete all as specified and directed.

Stainless steel tray of various sizes fixed in drawer to keep the kitchen utensil, fixed as in repair complete all as specified and directed.

18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe fitted to chowkhats, with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.

18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping on exposed edges fixed with nails, fixed as in repair complete all as specified and directed .

Continuous (piano) hinges,mild steel, bright finish or electrogalvanised,width of flaps (when open) 30mm, complete all as specified and directed.

40mm dia, cupboard knobs of brass fixed with nut, screw and washer of mild steel, bright finished, fixed as in repair complete all as specified.

Auto close stainless steel (clip hinges) 75mm size suitable for cupboard shutter fixed in position with stainless steel screws, fixed as in repairs complete all as specified & directed.

Hasp and staple 100mm size (ISI Marked), safety type brass including bolt to hinge plate, fixed as in repair all as specified and directed.

Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm, with bowl of size 410mm x 330mm x 160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair including removal of old kitchen sink of stainless steel with brackets, complete all as specified and directed.

Washing machine bib cock brass, fancy type, short body, with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.

Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Demolition of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Cutting out cracks to V section to 25 mm depth in existing roofs or terracing, cleaning out, wetting,and painted with shalitex primer and filled with sealing compound , tarplastic of STP or equivalent. complete all as specified and directed.

PCC 1:3:6 type C1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.

Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including applying bituminous primer @ 0.40 ltrs per square meter over clean RCC/plastered roof surfaces and adjoining vertical surfaces complete all as specified.

Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.

Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed

Cleaning removing of all waste material, sludge, silt , mud and garbage and vegitation etc from shafts of toilet block sewerage shaft and removing of all waste materials exc 250 Mtrs but not exc 500 Mtrs and repair of plaster, flooring, pointing brick work ad plumbing work etc in shaft in fowl condition as directed . NOTE : Plumbing, flooring, plastering etc will be measured and paid separately in respective items)

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.

Brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 75Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.

Half paneled and half glazed and skelton shutter (Factory made) 35mm thick of second class hard wood (hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.

Corner glass shelf Chromium plated with brackets, fixed as in repair complete all as specified and directed.

Plate rack 1.00mm thick stainless steel sheet of weight of plate rack not less than 09 Kilogramof size 900mm x750mm x 100mm , with steel shelves and hanging arrangement for utensil, fixed as in repair complete all as specified and directed.

25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base finished even and fair complete all as specified and directed.

False ceiling fibre cement board, white in colour, of size 595mm x 595mm x 4mm on and including standard powder coated GI snap grid, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc), fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, complete all as specified and directed.

Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Openable/Sliding three track) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws, locking roller in case of sliding shutters, arrangement etc. Weight of fitting fixtures will bot be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots / sliding type shutter and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections or sliding type shutters including all wheel and roller arrangements of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

9mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated both side with decorative choice lamination and other side balancing white lamination, complete all as specified and directed .

Door closer hydraulically regulated aluminium extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogram , complete all as specified and directed.

Toughened glass, 12 mm thick tempered, for decorative/crest, plain/frosted, cut to size, polished edge, homogenious colour fixed as in glass door shutter or glass partition including necessary holes, cutouts & shunk holes and necessary fittings, fixtures, brackets and accessories required like stainless steel hinges, floor door closer, latches, handle or knobs, stop plate etc including ruber beading and silicon clear for joints, fixed as in repair complete all as specified and directed by Engineer-in-charge. Note : Decoration/design or unit name, emblem, crest over glass shutter will be approved by Engr-in-charge before execution and the rates are inclusive of the same.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, all as specified.

Kota Stone Slab flooring, 18 to 20mm thick, minimum size 550 x 550mm, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, inclduing rubbing and mirror polishing complete all as specified and directed.

18mm to 20mm thick granite stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, steps, pillars, floors etc and jointed with grey cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar 1:6 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including dismantling of old stone slabs complete all as specified and directed.

Mild steel high strength deformed TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

Wash down water closet pan, Pedestal pattern, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set, complete all as specified and directed.

Vitreous china, Pedestal type one piece composite closet type, white colour of size 690 x 370 x770mm including integral chinaware flushing cistern and PVC seat cover complete all as specified and directed. MAKE : HINDWARE Cat Part No 92573 (S-22) /PARRYWARE / CERA as approve by Engineer-in-charge

Counter top basin, size 560mm x 410mm , oval shape complete all as specified and directed . MAKE : HINDWARE Cat Part No10017/ PARRYWARE / CERA as approve by Engineer-in-charge

Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. MAKE : HINDWARE Cat Part No F280009 / JAQUAR Cat No FLR-5167NB /ESS ESS as approved by Engineer-in-charge

Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

5mm thick PVC sheet fillet of width 35mm for wall and fixed to wall by means of rawl plugs to make PVC Frame as per specification complete all as specified and directed.

Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) complete all as specified & directed.

Reinforced cement concrete type B-1, 1:2:4 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed Note : Reinforcement and form work shall be measured and paid separately

Excavation in post holes (or similar hole) each in hard and dense soil, n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation of fencing post,, filling and mass concrete complete all as specified & directed.

Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 as grating over drain etc, complete all as specified & directed

Rolled sections as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc, complete all as specified & directed by Engineer-in-charge.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.

75mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base etc, complete all as specified and directed.

Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and no pigment and including laid over 25mm thick sand cushioning, complete all as specified and directed. Notes: The shape/size / colour of paver blocks shall be as approved by the GE.

Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with ‘P’ or ‘S’ trap, including seat cover and making good the disturbed surfaces and to match with existing surface,fixed as in repair complete all as specified.

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.

Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : (i) Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. (ii) Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 145 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 145 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 145 herein before but for one light point controlled by two way switch complete all as specified and directed

All as per serial item 145 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed.

Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed.

Switch modular type (ISI marked), single pole, 2 way 6A, 1 module complete all as specified & directed.

Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed.

Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed.

Modular switch type stepped fan regulator, single pole, 230 volt two module ,all as specified and directed.

Electric Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.

Modular switch type bell push, single pole, 230 volt one module,(ISI marked) all as specified and directed.

Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Lamp holder, PVC/Polycarbonate type with metal ring B-22 complete all as specified and direted.

Bulk head fitting in engineering plastic housing with clear prismatic diffuser 10 watt capacity complete all as specified and directed.

LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, fixed in repairs, all as specified..

LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete , all as specified and directed. MAKE : C&S cat Part No LTDC01220WLED/WD or equivalent in Philips / Havells

LED CRCA batten with decorative end cap complete with and including retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed. MAKE : C&S cat Part No LTDC01210WLED/WD or equivalent in Philips / Havells

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed.

Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade of earth for eathing complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 04 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separtely

Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade of earth for eathing complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separtely

Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade of earth for eathing complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 10 sqmm and one single core of 10 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separtely

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, all as specified and directed by Engr-in charge.

Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 100to 125Amps & outgoing 4 way having IP 54 protection complete all as directed

MCCB, 125Amps, four pole,3 phase , 36KA, 415 volt with adjustable thermal and maganetic release complete all as specified and directed

MCB DB, having IP 43 protection Powder coated double coated flush mounted complete with locking arrangement suitable for 12 way SPN with 200 Amp rated busbar 230 V AC complete all as specified and directed.

TPN distribution board double door flush mounting with provisions for MCCBs incomer TPN 6 way, 415 Colt having IP 43 protection complete all as directed

MCB DB, having IP 43 protection Powder coated double coated flush mounted complete with locking arrangement suitable for 8 way SPN with 200 Amp rated busbar 230 V AC complete all as specified and directed.

MCB DB, having IP 43 protection Powder coated double coated flush mounted complete with locking arrangement suitable for 2 way SPN with 200 Amp rated busbar 230 V AC complete all as specified and directed.

MCB, TPN, 415volt, 40-100Amps, 16 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

MCB single pole, 6 to 32 Amp, 240 Volts, B series, having braking capacity 10 KA , all as specified and directed.

MCB, SPN, 240 volt, 40Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

MCB, SPN, 240 volt, 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

MCB, SP , 240 volt, 63Amps, 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

25 mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, Complete all as specified and directed .

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed .

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.

Surface mounted LED porch down light in engineering plastic housing with clear prismatic diffuser 6 watt , 65000K capacity white light,fixed in repairs, complete all as specified and directed. Make : Havells cat Part No LHEAABP5IL1W006 or equivalent in C&S / Halonix

GI bracket made of GI pipe 'Light Grade' of size 40 mm dia, 1.5 mtr length bend to shape of 120 degree fixed on pole/wall with flat iron clamp of size 50x6 of suitable length fixed with nuts/bolts and 1.5 sqmm 2 core flexible wire from conductor/ceiling rose to light fitting , fixed in repairs, complete all as specified and directed.

LED security light 35 watt LED with lens and water/weather proof powder coated high pressure dia cast housing with IP-66 built - in control driver, aluminium reflector, heat resistant toughened clear glass, connector block, surge protection with 25 watt LED lamp fixed on ceiling/pole/wall with fixing arrangement fixed with nuts/bolts and 1.5 sqmm 3 core flexible wire from ceiling rose to light fitting complete including taking down old security fitting any type ,all as specified and directed .

Metalic body exhaust fan 225mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 1350 to 1400 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan

Cutting openings, through brick walls in round shape , for 225mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc. from site and rubbish complete all as specified & directed by Engineer-in-charge.

Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, all as specified and directed.

Cutting & Screwing existing steel tubing 15mm /20mm bore pipe for alterations or additions complete all as specified and directed.

LED luminaire ,36w , suitable for recess mounting LED ultra slim ceiling light with extruded aluminium housing with milky diffuser recess mounting ultra slim led 2'x2' panel and including with 36 watts recess mounted complete with drivers and other acessories as per manufacturer's recommendations and connections from ceiling rose fixed as in repair complete all as specified and directed.

KUNDRA CONSTRUCTIONS

PARVEEN KUMAR AND SONS

Gunjan and Gunjan Associates

Standard Const. Co.