Providing BT Surface Road in 115008R01415Meenakshi amman nagar Main road (E)115008R01695Santhosh nagar main road at ward No. 8

Amount

Earth work excavation for foundation in Hard stiffclay, stiff black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small sizeboulders SS.20B and Sand, silt or other loose soil, wetsand,or silt not under water, light black cotton soil,sandy loam ordinary soil and to full depth as may bedirected except in hardrock requiring blastinginclusive of shoring shuttering and baling out waterand cleaning and levelling the site etc.,complete 10cum. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401, 900 MDU-CORP DATA-P-23 - SL No:8

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Providing and laying Prime coat of 7.00kgs/10 sqm over the WMM surface treated with primer using using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev V Specifications

Providing and laying tack coat of 2.50kgs/10 sqm over the prime surface treated with binter using 2.50 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50 mm with paver to the specified grades and cross sections and compacted by vibratory/pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finishers/9m Paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per Specification using CMP as per clause 505 MORTH Rev-5

Providing and laying bituminous concrete to 40mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50 - 2.36mm and 0.26cum of 2.36 and below with 50.30 kgs of VG30/V bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity convyeing the mix by tipper trucks to paver site spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory/pneumatic roller to the required density etc including labour for attending to paver to site etc including hire charges and fuel charges for 20-30t CMP with bitumen boiler,tipper trucks ,paver finisher /9m paver finisher ,vibratory/pneumatic roller adn all other tools and plant required including fuel and all other incidental charges etc complete as per specification using CMP as per clause 507 of MORTH rev-5

Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm.area.thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streadks sdand holes etc complete.(as per MORT & H Specification no803) MDU-CORP DATA-P-21 -SL No:5

Manufacturing,supply and fixing of Retro reflecters road name sign board sngle arrow big size out if wide anglecub corner micro prismatick grade sheeting conforming to IRC 67-2010 and type XI of standards of ASTM 4956.09 specification and fixed over 2mm tk aluminium sheet and back support frame by 32Np stailess steel pipe alroung and 65Np pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 Grade concrete 30cmx30cmx 45cm etc.,complete.the information message shall be made out of cutout letter in blue colour transparent overlay film as per IRC67:201 guideluines 7years pre qualification warrenty for Retri-reflective sheeting from the original sheeting manufacture and a certified copy of three ears out door exposure report from and independent test lab for the product offered shall be submitted by the contractor.The sign board shall be retro reflective type XI,the retro reflective sheeting should have manufacture ward mark on the sheeting surface for identification and the relective sheeting should be oientation free etc.,complete singlr arrow big etc complete

PMA CONSTRUCTIONS