REPAIRS TO FLOORING PLASTERING PLUMBING AND OTHER MISC BR WORK AT CERTAIN BLDGS AT OTM ACCN OF HQ CENTRE UNDER AGE BR MEG OF GE NORTH BANGALORE

Amount

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete etc all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L MS Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed

S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed

Hacking out old Broken glass (Any thickness) size, quality of descriptin from wooden/steel frame etc compelete all as specified and as directed

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooing etc complete all as specified and as directed

M&L for vitrified ceramic tiles light colour 8-10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item no 26 above, but as in vertical surfaces such as skirtind/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM(1:3) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Vitrified ceramic tiles any shade /double Chraged / Ultra Charged (GVT), colour 8-9mm thick (square /rectangular )polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm each in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Vitrified ceramic tiles any shape /double Chraged / Ultra Charged (GVT), colour 8-9mm thick (square /rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm each as in vertical surface (Skirting /Dado) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including including rendering of 10mm thick in CM(1:3) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 30 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

Material and Labour for 15-16 mm thick Sadarahalli Stone as flooring including nosing, grinding & polishing , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

Material and Labour for 15-16 mm thick Sadarahalli Stone as skiting / dado including nosing, grinding & polishing , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed and including Screed bed or bedding layer of mortar 10mm thick in CM 1:3 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

Demolition of stone slab and tile of any description or thickness in floor, arons etc (Laid bedded and pointed in any type of mortar) etc complete all as specified and as directed

M& for M Sand cushioning for laying of interlocking tiles etc complete all as specified and as directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 etc complete all as specified and as directed complete all as specified and directed.

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 20mm thick Granite stone slab (Z Black or any other colour as approved) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl 15 mm thick screed bed in CM 1:6 etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials complete all as specified including taking down old unserviceable pipe lines of any type.

S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed

S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag of equlavent make of Cera)

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs PVC flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equivalent make of CA)

S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag of equivalent make of CA)

S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag of equivalent make of CA)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equivalent make of CA)

S&F in repairs overhead round rain shower 8" Iwith out armns) of 15 mm bore dia etc complete all as specified and as directed (Make Cat no BOS-41 of Prayag of equivalent make of CA)

S&F in repairs SS Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag of equivalent make of CA)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed

M&L for Precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 incl dismantling of existing RCC of any description etc complete all as specified and directed.

M&L TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, kerbs, water troughs / Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each and refxing in same opening after minor adjustment, cutting, chiselling etc complete all as specified and as directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

MAJ CONSTRUCTIONS (BID ID -3321172)

M/S POTHIRAJ AND CO (BID ID -3329298)

M/S SIRI BUILDERS (BID ID -3322488)

J R CONSTRUCTIONS (BID ID -3328619)

MAA ENGINEERING SERVICERS (BID ID -3328500)

Sreyas Enterprises (BID ID -3319816)

OM CONSTRUCTIONS (BID ID -3327258)