SITC of AC work

Elecectrical Work: Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex / Polycab / RR Kabel) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC

SITC Microprocessr Controlled, DX Type ceiling suspended Ductable Air conditioner Unit with all necessary acessories ( hanging the Indoor from ceiling with 4 nos 10mm steel rod and connecting suitable size Ms angle /C-Channel from existing Joist beam to Joist beam & Outdoor unit on existing frame structure as per site condition having following specification i) Refrigerent-R410A/R407C ii) Expansion Valve:Thermostatic/Electronics iii) Compressor :Scroll/TwinRotary with Fixed speed v) ODU: Outdoor Unit Air cooled Condenser unit With Copper coil with Aluminium fins having single compact ODU or multiple ODU unit vi) IDU: Indoor Unit having synthetic Filter and wireless/Wire Remote Vii) CFM: 400/Tr viii)Protection: Single Phase Preventer, phase reversal preventer, HP/LP cut Out. ix)Power sypply: 415+/- 10%, 50Hz x)Ambient temperature: 48°C +/- 5°C (Tollerance) Make: (Make:Hitachi/Daikin/ Blue Star/Voltas/carrier) no extra shal be payable for refrigerant gas & transportation/shifting work.

Min BTU/Hr:19 KW (1 nos. compressor)

REFRIGERANT PIPING WITH INSULATION: Supply & Laying Hard / Soft drawn Copper Refrigeration pipe line for liquid and suction line suitable for R410A/R407C refrigerant & 19 mm thick Nitrile Rubber 'class O' Insulation tube with supports & brackets as per direction of EIC.

Liquid Line ( 5/8" dia) without rubber insulation (make: Rajco / Mandev / Royku)

Suction Line (7/8" dia) with 19 mm thick nitrile rubber insulation Al foil covered (make: Rajco / Mandev / Royku)

DRAIN PIPE: Supply and fixing of Drain piping by UPVC with 6mm thick nitrile rubber insulation and necessary quantities of supports, flanges, bends, elbows, fittings, nut-bolts, gaskets etc:

Duct Work: Fabrication , supply, Installation , testing & commissioning of following GSS(120 GSM) sheet conforming to IS:655 – 277 (SAIL/ TATA/ JINDAL or as per choice of EIC) rectangular duct complete with neoprene rubber gaskets, elbows, splitter supports, flanges, turning vanes for supply air / return air duct erected with supporting rods, fustners, nuts etc.

DUCT THERMAL INSULATION: Supplying and fixing of 13mm thickness duly laminated aluminium foil of mat fininshedclosed cell Nitrile rubber (class ''O'') insulation ANTI MICROBIAL COATING type on duct after applying two coats of cold setting adhesive (The joints shall sealed with 50mm wide and 3 mm thick self afhesive nitrile rubber tape insulaton complete as per specifications and as required. for Duct (K-Flex / Amracell / Supreme / K-Flex)

Supplying, fabrication & fixing M.S. Angle Frame for installation of 1 nos Outdoor unit . the structure having 4 nos 50 x 50 x5 mm MS angle for main bottom support grouted on wall with total length 16' and in between main support 7 nos 25 x 5 mm ms strip . For railing vertical & horizontal support is made by 25 x 25 x 5 mm Angle for safety of maintenance , total length 25' ; including cutting holes , welding , painting and mending good damage as per EIC