TENDER FOR SPECIAL REPAIR TO BLDG NO P-56(CENTRAL MI ROOM) AT RATNUCHAK UNDER GE KALUCHAK

Amount

B&R PORTION:- Taking down chowkhats or frames (without taking down shutters from the frame) not exceeding 1.5 sqm each and removing from site complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified.

Taking down door shutters and refixing in same opening after carrying out alteration of any description area exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified.

Taking down door shutters of any description area exc 1.00 sqm and not exc 2.00 sqm complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position, complete all as specified and as directed.

Demolition of cement concrete of any description at any floor not other wise described complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as directed.

Dismantling water tanks of any description, 1000 litres capacity and removing from site, complete all as specified and directed.

Hacking out old broken glass, (any thickness, size, quality or description) from steel frames including punching or drilling out old glazing pins /spring clips complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises.complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1:4, complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid PVC Moulded door shutter 28 to 30mm thick (style) with particle board core & with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain Colour PVC sheet on back face, supplying & fixing in the frame at site as per specification in SSR Part-I with particle board core complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125 x 60 mm made out of 1.25 mm thick MS sheet, complete all as specified and directed.

PCC 1:3:6 ,type C-1 (using 12.5 mm graded crushed stone aggregate) as in mass concrete, back filling in hollow portion of the door frames

35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8, clause 8.24 (a) complete all as specified and directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed.

Aluminum anodized barrel tower bolt of extruded section and fixed complete of size 200 mm long complete all as specified.

Aluminium alloy anodised sliding door bolt, 250 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete.

Extruded aluminium alloy handles fabricated type, anodised 150 mm long complete all as specified and directed.

MS butt hinges 100 mm medium weight cold rolled mild steel, complete all as specified and directed.

Aluminum Handle cast type anodized of size 150mm, complete all as specified.

Sheet glass, ordinary quality, 3.00 mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified.

Roughening of old concrete surface by picking , sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.00kg of cement per sqm, complete all as specified and directed.

Light shade Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Light shade Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. laid over and including10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Non skid coloured ceramic tiles 7 to 8 mm thick square / rectengular area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc laid over and including a layer of 15 mm thick screed bed of cement motar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick as in vertical surfaces such as in skirting, dados etc. laid over and including10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc in CM 1:4 including mixing of water proofing compound as per manufacturers instructions & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid separatly.

Rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished the surface even and smooth with out using extra cement, complete all as specified.

Rendering 5 mm thick using CM (1:3) on ceiling surfaces & finished the surface even and smooth with out using extra cement, complete all as specified.

Supply only WPC (Water Proofing Compound ) complete all as specified and directed . Makes:-SIKA/FOSROC/CHOKSEY

TMT mild steel bars10mm dia and above cut to length bend to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

RCC 1:2:4 type B-1 as in slabs supported on walls, beams and columns in floors, roofs, landings, baiconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to sides / soffits of suspended slab such as roof slab, floor slab, landing and similar type of work not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.

20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1:4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler all as directed at site complete all as specified and directed.

Mild steel tubes 15mm bore, medium grade, galvanised with all fittings laid in floor or fixed to walls, ceilings etc. complete all as specified and directed.

Description all as item No.43 above but except tubing complete all as specified and directed.

Mild steel tubes, 20mm,medium grade, galvanised with all fittings and laid in floor or fixed to walls, ceilings etc. complete all as specified and directed.

Description all as item No.45 above but except tubing complete all as specified and directed.

Chromium plated fancy type angle valve with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repairs, complete, all as specified.

Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixed in repairs, complete all as specified.

Stop cock chromium plated fancy type with long shank and cup (concealed type) with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions fixed in repairs, complete, all as specified.

Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete for 25mm dia pipe, complete, all as specified.

Bib tap cast copper alloy CP, fancy type, with capstan head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar Cat Part No QQT-7037 or equivalent cat part of make as specified in Appx 'F'.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity , all as specified in SSR Part-I.

Vitreous China waterless (Aquafree) star white urinal with cartridge half stall flat back complete with all accessories including CP spreader, PVC connection etc. fixed in repairs all as approved complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and union for discharge pipe and waste pipe, complete all as specified and directed. Make : Hindware Cat Part No 60017 or equivalent cat part of make as specified in Appx 'F'.

Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs , including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe fixed in repairs, complete all as specified and directed.

Vitreous china wash hand basin 580 x 450mm, white with half pedestal, brackets, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, chain and plugs, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side fixed in repairs, complete all as specified and as directed. Make : Jaqauar Cat Part No OPS-WHT-0610 or equivalent cat part of make as specified in Appx 'F'.

10 litres capacity PVC low level flush cistern of approved make complete with PVC flush pipe and connection to water closet fixed in repairs, complete all as specified and directed.

PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and directed.

15 mm bore pillar taps cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

Towel rail stainless steel 20 mm dia fixed in repairs complete all as specified and directed.

Fancy type chromium plated shower rose with swivel joints, 50 mm dia including fixing to steel pipe or union complete all as specified and directed.

PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls in repairs complete all as specified and directed.

PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in floors in repairs complete all as specified and directed.

PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls in repairs complete all as specified and directed.

PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints laid in floor in repairs complete all as specified and directed.

PVC (SWR) bends110mm with oval acess door complete all as specified and directed.

PVC (SWR) bends 75mm with oval acess door complete all as specified and directed.

PVC (SWR) vent cowl 100 mm complete all as specified and directed.

PVC (SWR) branch piece (single Y) equal or unequal 110mm with oval acess door complete all as specified and directed.

PVC (SWR) juncton single, (single T ) equal or unequal 110mm with oval acess door complete all as specified and directed.

Chromium plated grating 100mm dia. fixed in repairs complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore.fixed in repairs complete all as specified and directed.

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface with & including liquid water proofing as per manufacturer's instructuion. (b) Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 C and applied @ 1.2 kg/sqm. (d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by ......contd.....

forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed.

Preparation of old plastered surfaces of wall and applyingtwo coat of OBD over a coat of Birla wall care putty 2-3mm thick etc complete all as specified and directed.

Applying two coats of cement base paint on newly plastered walls including preparation of newly un-treated surface complete all as specified.

Complete removal of existing surfaces and applying two coats of cement base paint on old plastered walls including preparation of old treated surface complete all as specified.

Complete removal of exisiting treatment and applying two coat of weather proof paint(apex) over and including a coat of approved primer as on fins, projections chajja etc complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coat of weather proof paint(apex) over and including a coat of approved primer as on fins, projections chajja etc complete all as specified and directed.

Preparation of old plastered surface and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of new or untreated wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Preparation of old trwated wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint, complete all as specified.

Steel windows with side hung shutters projecting type hinges with steel handle of 100mm and steel peg stay, complete with glazing bars dovetailed or welded complete as specified and directed.

All as per srl item No 88 above but without glazing bars.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

Preparation of old treated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, complete all as specified.

Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer, complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire stapple fixed, complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire stapple fixed in repairs, complete all as specified and directed.

Cleaning of surface of RCC Chajja with wire brush, washing with clean water, taking down cement plastering of any thickness including scrubbing down loose portion complete work of height up to 06 mtr of roof surfaces / fins, external surfaces of chajja portion including neccassary formwork if required and applying dubbing coat of plaster or epoxy concrete of required thickness and plastering 10 mm thick in CM 1:4 and applying two coats of acrylic cementious brush applied water proof coating with dry film total thickness of approximate 1mm thick (Make Dr Fixit Pidilite 2K or equivalent product of M/S Chemistek, M/s Prima etc) complete, , all as manufacturer's instructions all as specified and directed.

Excavation in trenches n exc 1.5m wide and not exc 1.5m depth for foundation etc or for shafts ,manholes, etc not exc 10 sqm on plan and not exc 1.5m depth and getting out in any type of soil complete all as specified and directed.

PCC 1:4:8 type D-2(using 40 mm graded crushed stone agg) as in foundation, filling, sub base to flooring, mass concrete etc complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick in any type of soil, complete all as specified.

Removing surplus material (soil) to a distance exc 50 m but n exc 100 m and depositing in any type of soil complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete M-10(Nominal mix )using 20mm graded aggregates for 150mm dia bore pipes all as per SSR PART I specifications complete all as specified and directed.

Salt-glazed stoneware(SGSW) gradeA drain pipes150mm bore laid and jointed complete including testing etc all as specified and directed as per SSR PART I specifications.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of dia 150mm bore, complete all as specified and directed.

Single bowl sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste pipe complete and including 75-100mm HDPE Sink coupling and waste pipe fixed in repairs etc alll as directed and specified by Engr in Chage

Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Hard core of guage not exc 63 mm , deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface with brocken stone boulders complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase floor finished even and smooth with out using extra cement complete all as specified,;

Precast factory made designed pavings tiles of different colour and shapes of size 300 x300 x20 mm laid and jointed with grey cement slurry mixed with pigment to match the shade of tiles, thickness not less than 20 mm and compressive strength not less than 250 Kg /Sqm complete with & including 15 mm thick bedding layer of cement mortar 1:4 all as specified and directed by Eng-in charge (as per Sample kept in AGE office) Make Oyster/ Onyx/ Oak/ dura stone

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

Gypsum board 12mm thick as in ceiling fixed with screws on and including Galvanized iron with powder coating snap grid frame work (size of grid 605x605mm) with fasteners, supports, plugs to walls/ceiling joints etc complete as per manufacturer instructions and as directed by Engr-in-Charge. Make :- Gypsum board India Limited or equivalent make as specified in Appx 'F'. Note :- Rate quoted above shall be deemed to include for all factors such as making holes, cutting chassis ,binding with fastners in ceiling and making good to existing walls in cement mortar 1: 3 as per existing finish all as directed at site.

Aluminium anodized frame (for doors) of size 101.60mm x 44.45mm made out of 1.60mm thick aluminium section, powder coated, fixed to floor wall with plugs and screws complete all as specified and directed.

Aluminium anodized frame (for window /cupboards) of size 67.60mm x 44.45mm made out of 1.60mm thick aluminium section, powder coated, fixed to floor wall with plugs and screws complete all as specified and directed.

Aluminium anodized door shutter including mortice lock 6 levers aluminium body hydraulic door closer as approved, door handle, tower bolt hinges all made of aluminium section, powder coated, of adequate number and size 52.55mm x 44.55mm x 44.45mm and bottom rail of size 114.3mm x 44.45mm (door 02 Nos) and all member of window of size 44.45mm x 44.45mm (window) and jointing cleats with 12mm thick PVC hollow profile panelling in addition to other fitting as directed at site. All aluminium members shall be made out of 1.60mm thick aluminium sheet/section). Notes :- (i) Centre moving door shutter with floor bearing hinges/sliding door hinges door set complete all as specified and directed. (ii) Glass shall be measured and paid for separately. (iii) PVC panelling of shade as approved by Engr-in-Charge shall be inclusive of the quoted cost.

Aluminium anodized three track window shutters consisting of two Nos glazed shutters and one gauzed shutter including, aluminium handle, tower bolt hinges all made of aluminium section, powder coated, of adequate number and size and all member of window of size 44.45mm x 44.45mm (window) and jointing cleats. All aluminium members shall be made out of 1.60mm thick aluminium sheet/section) complete all as specified and directed. Note : Glass panes / wire mesh shall be measured and paid for separately.

5mm thick tinted glass as in aluminium door with aluminium hollow beading / glazing clip size 19mm x 17mm made out of 0.70mm thick aluminium section weighing not less than 0.97Kg/RM including rubber gasket complete all as specified and directed.

4mm thick tinted glass as in aluminium window with aluminium hollow beading / glazing clip size 19mm x 17mm made out of 0.70mm thick aluminium section weighing not less than 0.97Kg/RM including rubber gasket complete all as specified and directed.

PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

Description all as per srl item No-119 above but for one 3 pin socket outlet 6 amp independent complete all as specified.

All as per item No. 119 here-in-before but for 3 pin 5 Amps on same board with cable 1.5 Sqmm size, all as specified and directed

Description all as per srl item No 119 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 2.5 sqmm as in continuous earth wire.

Switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified.

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Fan regulator 2 module, stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Switch socket outlet, 3 pin, 5 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Inverter lamp LED 9 watts, 230 volts AC 50 Hz 900 lumens with 4 hours backup, complete all as specified.

Indoor decorative LED 10W 230 volts AC 50 Hz suitable as mirror fittings housing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting, complete all as specified and directed. Make: Crompton Cat Part No LCL-14-CDL or Equivalent cat part of make as specified in Appx 'F' here in after.

LED surface mounted round LED Slim RO/SQ SM downlight 9 Watt in powder coated white finish with integrated electronic driver with all accessories pre wired and making connection complete all as specified and directed. Make:-Wipro Cat Part No:-LD90-111-XXX-65-XX* or Equivalent cat part of make as specified in Appx 'F' here in after.

Integrated LED Bulk Head luminaire comprises of Pressure Die Cast housing 10W LED IP65 protection with acrylic diffuser & frame with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to bulk head fitting including Led lamp of 10W complete all as specified and directed. Make: Crompton Cat Part No LBHN-10-CDL or Equivalent cat part of make as specified in Appx 'F' here in after.

ON load change over switch panel mounting type 415 volts 4 pole of capacity 100 Amps in sheel metal enclosure, complete all as specified.

Taking down carefully sub main wiring of any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, complete all as specified and directed. Note:-2 wire of 6sqmm, 1 wire of 4sqmm and one run of pvc conduit shall be measured as one unit.

Sub main wiring with single core cable 2x 4 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 2.5 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, complete all as specified and directed. Note:-2 wire of 4sqmm, 1 wire of 2.5qmm and one run of pvc conduit shall be measured as one unit.

Sub main wiring with single core cable 2x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, complete all as specified and directed. Note:-2 wire of 10sqmm, 1 wire of 6qmm and one run of pvc conduit shall be measured as one unit.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified. Make:-Schneider Cat part No:- A9HSND08 or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCB, MCCBs and DBs shall be of same make.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door with 250Amps rated bus bar suitable for FP MCCB as incommer and out going SP/TP MCBs 12 ways, complete all as specified and directed. Make:-Schneider Cat part No:-A9HVD12L or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCCBs and DBs shall be of same make.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door with 250Amps rated bus bar suitable for FP MCCB as incommer and out going SP/TP MCBs 04 ways, complete all as specified and directed. Make:-Schneider Cat part No :-A9HVD04L or equivalent cat part of make as specified in Appx "F" here in after. Note:- MCB, MCCBs and DBs shall be of same make.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door with 250Amps rated bus bar suitable for MCB's as incommer and out going SP/TP MCBs 12 ways, complete all as specified and directed. Make:-Schneider Cat part No :-A9HVTD12 or equivalent cat part of make as specified in Appx "F" here in after. Note:-MCB, MCCBs and DBs shall be of same make.

MCCB 415 volts 4 Pole, rating 125 Amps,having short ckt and over load protection, breaking capacity 25 KA , complete all as specified. Make: Schneider Cat Part No-LV516312 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB triple pole 40-63amps 415 volts 10 KA 'C' series all as specified. Make:- Schneider Cat Part No A9N3P40C-A9N3P63C or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB four pole 40-63amps 415 volts 10 KA 'C' series all as specified. Make:- Schneider Cat Part No A9N4P40C-A9N4P63C or Equivalent cat part of make as specified in Appx 'F' here in after.

Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 24 volts, complete all as specified

MCB double pole 6-32amps 240 volts 10 KA 'C' series all as specified. Make:- Schneider Cat Part No A9N2P06C-A9N2P32C or Equivalent cat part of make as specified in Appx 'F' here in after.

MCCB 415 volts 4 Pole, rating 100 Amps,having short ckt and over load protection, breaking capacity 25 KA , complete all as specified. Make: Schneider Cat Part NoLV510317 or Equivalent cat part of make as specified in Appx 'F' here in after.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

Water heater (Geyser) sorage type (5 star rating) of capacity 35ltrs with all accessories including inlet and out heavy duty PVC connection 15mm bore with brass nuts, washers complete on both ends & provn of suitable size nuts,bolts for fixing / achoring the geyser including marking MES No on Geyser with synthetic enamel paint, complete all as specified. Make:Havells Cat Part No-GHWAMGSWH035 or equivalent cat part of make as specified in Appx 'F'.

Exhaust fan 300 mm sweep, heavy duty, single phase AC 230/240V 50 Hz AC, with energy efficient motor ,pre-lubricated double ball bearing ,speed 1400 RPM, complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible PVC insulated copper conductor cable 3 core 0.75 sqmm from ceiling rose to exhaust fan complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 70 Sqmm x 3.5 core, complete all as specified.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

GI pipe light grade 50 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Cutting of PCC hard standing / metal road not exceeding 20cm in width & nexc 45cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surface, complete all as specified.

MCB single pole 6-32amps 240 volts 10 KA 'C' series all as specified. Make:- Schneider Cat Part No A9N1P06C-A9N1P32C or Equivalent cat part of make as specified in Appx 'F' here in after.

Hare krishna engineering const.

NARESH KUMAR AND COMPANY

M/s Sekinder Paul Sharma

M/S Sudagar Mal

Dee Ess Construction Co