Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.9 LAccepted-Finance | ₹68.9 L | L1 | Accepted-Finance L1 |
| Sl No | Description | Qty | Unit | CSENGINEERING L1 |
|---|---|---|---|---|
| 1.00 | PRE-INSULATED CHILLED WATER PIPING
Supply, installation and testing of MS 'C' class conforming to IS 3589 / IS 1239 pre- insulated pipes (running in vertical riser, main header pipes & pipes running in plant room) insulated with CFC free PUF insulation (in pipe sections) covered with polystyrene sheet and finished with 24 G GI cladding. The necessary saddle supports to be provided as mentioned in the specification. The piping flange connection bolts and nuts should be of hot dipped galvanised. Please refer technical specifications for complete details and
200 mm dia with 50 mm insulation | 10 | Rmt | 5,600 ₹56,000 |
| 2.00 | PRE-INSULATED BUTTERFLY VALVES (CHW PIPING) :
Supply, installation, testing & commissioning of Butterfly valves with 1000kPa working pressure,60 Deg C maximum operating temperature, Cast iron body for DN 50 to 300, Ductile iron body for DN 350 plus, EPDM Seal, Stainless Steel 416 Shaft material, Nylon coated ductile iron, extended stem, lever lock handle, and wafer style for installation between flanges and confirming to IS:13095. Use Table “E” Flanges for connections with GI bolt nuts. Please refer technical specifications for complete details and scope & quote accordingly.
250 mm dia | 2 | Nos | 48,000 ₹96,000 |
| 3.00 | AIR HANDLING UNITS:
Design, Supply, Installation, Testing and commissioning of factory made, Floor / Ceiling suspended / Loft mounted Double Skin, (50-mm thick above 15TR & 25-mm thick below 15 TR CFC free PUF panels with 0.6-mm thick inner & 0.8-mm outer skin) horizontal air- handling units, Pre-filter section with Pre-filters (90% down to 10 micron - MERV 8), minimum 6 rows deep Cooling coil section with 1.2-mm thick Stainless steel (SS 304) Insulated condensate drain pan with 9-mm thick closed cell Nitrile rubber bottom Insulation,DIDW backward / forward curve centrifugal fan, necessary mounting frame, Vibration isolators, 2mm thick GI base frame, Aluminium structural frame work, Fire retardant flexible connection, Access door, accessories and as per technical specifications. Coils shall be sized to meet conditions provided in AHU specifications. The contractor should include control cabling for limit switch and marine light operation, all MCCB's, controls and transformers cabling will be of approved make and AHU fan Motor termination.
10.0 TR, 6800 CMH, 250Pa ESP | 1 | Nos | 1,60,000 ₹1.6 L |
| 4.00 | 22.0 TR, 15000 CMH, 250Pa ESP | 3 | Nos | 3,90,000 ₹11.7 L |
| 5.00 | CHILLED WATER PIPING
Supply, installation and testing of MS 'C' class pipes conforming to IS 3589 / IS 1239, insulated with CFC free PUF insulation (in pipe sections) covered with polystyrene sheet and finished with 24 G aluminium cladding. The necessary saddle supports to be provided as mentioned in the specification. The piping flange connection bolts and nuts should be of hot dipped galvanised. Please refer technical specifications for complete details and scope & quote accordingly.
300 mm dia with 75 mm insulation | 28 | Rmt | 8,500 ₹2.4 L |
| 6.00 | 250 mm dia with 75 mm insulation | 69 | Rmt | 6,600 ₹4.6 L |
| 7.00 | 200 mm dia with 75 mm insulation | 106 | Rmt | 5,800 ₹6.1 L |
| 8.00 | 150 mm dia with 50 mm insulation | 12 | Rmt | 4,200 ₹50,400 |
| 9.00 | 125 mm dia with 50 mm insulation | 168 | Rmt | 3,600 ₹6.0 L |
| 10.00 | 100 mm dia with 50 mm insulation | 162 | Rmt | 3,200 ₹5.2 L |
Tender Value
₹66.0 L
EMD Value
₹66,048
Closing Date
4 Mar 2026, 3:00 pmClosed
The Commissioner Madurai Corporation
Aringar Anna Maligai , Thallakulam , Madurai
Additional work for Air Conditioning and IPMS work at periyar Bus stand shopping complex
2026_MAWS_666754_1
E7/Est No 473/25-26
Open Tender
Civil Works
Madurai
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹66,048
12 Mar 2026
26 Feb 2026
4 Mar 2026
26 Feb 2026
4 Mar 2026
26 Feb 2026
PRE-INSULATED CHILLED WATER PIPING Supply, installation and testing of MS 'C' class conforming to IS 3589 / IS 1239 pre- insulated pipes (running in vertical riser, main header pipes & pipes running in plant room) insulated with CFC free PUF insulation (in pipe sections) covered with polystyrene sheet and finished with 24 G GI cladding. The necessary saddle supports to be provided as mentioned in the specification. The piping flange connection bolts and nuts should be of hot dipped galvanised. Please refer technical specifications for complete details and 200 mm dia with 50 mm insulation
PRE-INSULATED BUTTERFLY VALVES (CHW PIPING) : Supply, installation, testing & commissioning of Butterfly valves with 1000kPa working pressure,60 Deg C maximum operating temperature, Cast iron body for DN 50 to 300, Ductile iron body for DN 350 plus, EPDM Seal, Stainless Steel 416 Shaft material, Nylon coated ductile iron, extended stem, lever lock handle, and wafer style for installation between flanges and confirming to IS:13095. Use Table “E” Flanges for connections with GI bolt nuts. Please refer technical specifications for complete details and scope & quote accordingly. 250 mm dia
AIR HANDLING UNITS: Design, Supply, Installation, Testing and commissioning of factory made, Floor / Ceiling suspended / Loft mounted Double Skin, (50-mm thick above 15TR & 25-mm thick below 15 TR CFC free PUF panels with 0.6-mm thick inner & 0.8-mm outer skin) horizontal air- handling units, Pre-filter section with Pre-filters (90% down to 10 micron - MERV 8), minimum 6 rows deep Cooling coil section with 1.2-mm thick Stainless steel (SS 304) Insulated condensate drain pan with 9-mm thick closed cell Nitrile rubber bottom Insulation,DIDW backward / forward curve centrifugal fan, necessary mounting frame, Vibration isolators, 2mm thick GI base frame, Aluminium structural frame work, Fire retardant flexible connection, Access door, accessories and as per technical specifications. Coils shall be sized to meet conditions provided in AHU specifications. The contractor should include control cabling for limit switch and marine light operation, all MCCB's, controls and transformers cabling will be of approved make and AHU fan Motor termination. 10.0 TR, 6800 CMH, 250Pa ESP
22.0 TR, 15000 CMH, 250Pa ESP
CHILLED WATER PIPING Supply, installation and testing of MS 'C' class pipes conforming to IS 3589 / IS 1239, insulated with CFC free PUF insulation (in pipe sections) covered with polystyrene sheet and finished with 24 G aluminium cladding. The necessary saddle supports to be provided as mentioned in the specification. The piping flange connection bolts and nuts should be of hot dipped galvanised. Please refer technical specifications for complete details and scope & quote accordingly. 300 mm dia with 75 mm insulation
250 mm dia with 75 mm insulation
200 mm dia with 75 mm insulation
150 mm dia with 50 mm insulation
125 mm dia with 50 mm insulation
100 mm dia with 50 mm insulation
80 mm dia with 50 mm insulation
65 mm dia with 30mm insulation
50 mm dia with 30mm insulation
40 mm dia with 30mm insulation
32 mm dia with 30mm insulation
25 mm dia with 30mm insulation
PRE-INSULATED BUTTERFLY VALVES (CHW PIPING) : Supply, installation, testing & commissioning of Butterfly valves with 1000kPa working pressure,60 Deg C maximum operating temperature, Cast iron body for DN 50 to 300, Ductile iron body for DN 350 plus, EPDM Seal, Stainless Steel 416 Shaft material, Nylon coated ductile iron, extended stem, lever lock handle, and wafer style for installation between flanges and confirming to IS:13095. Use Table “E” Flanges for connections with GI bolt nuts. Please refer technical specifications for complete details and scope & quote accordingly. 200 mm dia
150 mm dia
65 mm dia
ADD GST 18%
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
473.pdf
Tender Documents • 1.12 MB
BOQ_800956.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid