SPECIAL REPAIR TO BLOCK NO. P-03 (TYPE- V) QTRS AT NIRIKSHAN VIHAR AT CQA (A) KHADKI PUNE

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter with iron mongery (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter with iron mongery (without taking off shutter from the frame) complete all as specified and as directed.

Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc complete all as specified and as directed.

Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast including providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil) and as in holdfast etc complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood factory maid plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed.

Supply and fix for 30mm thick 1st class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.

Supply and fix for factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and a directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix 300mm Length Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

Supply and fix brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long, and fixed complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles 150mm long in size , D Type fabricated type,anodised complete all as specified and as directed.

Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nailse around the partical board etc complete all as specified and as directed.

Supply and fix 40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Material and labour for 2nd class hard wood Plain fillets, square, rectangular or triangular in section exc 13.00 & n. exc 25.00 Sqcm, clean sawn, secured with nails or brads complete all as specified and as directed.

Supply and fix for Hasp and staple 125mm in size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed.

Supply and fix in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.

Material and labour for Glazed vitrified tiles light shade 7 to 8mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm, as in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 25 but in skirting, dado and pillar in vertical surface laid over and incl 10mm thick rendering in CM 1:4 and pointied in white or coloured cement to match complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm /300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish complete all as specified and as directed.

Demolition of re-inforced cement concrete of any description and in any position (reinforcement cut as required to facilate demolition) etc complete all as specified and as directed.

Material and labour for TMT bars 6 mm to 8 mm dia and over and cut to length, bend to shape required including cranking, bending spirally for hoping for columns, RCC cover slab/chajja/facia hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Material and labour for providing, precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) set in CM (1:4) in landing, cover slab (for manhole etc) chullah hoods, chajja, water trough, mangers, shelves and similar articles with plane face including formwork etc complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specified and as directed.

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for mrickwork with flyash old size bricks , straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 in any position, complete all as specified and as directed.

Material and labour for 15mm thick Rendering on brick /concrete surface in CM 1:6 with water profing compound finishing even & fair complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed.

Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specified and as directed.

Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Sink fixed complete all as specified and as directed.

Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

Supply and fix in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specified and as directed.

Supply and fix in repairs Central hold basin Mixer chromium plated Hot and colt with copper pipe complete all as specified and as directed.

Supply and fix in repairs vitreous china soap tray , white, approximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screws complete all as specified and directed..

Supply and fix for PVC bathroom cabinet mirror 600x450mm including all necessary arrangement and fitting complete all as specified and as directed.

Supply and fix in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed.

Supply and fix Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union for 15mm pipe complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed on wall upto height 10 mtr etc complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) bends, or similar fitting are required to make the system functional complete all as specified and as directed.

Supply and fix in repiar for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Supply and fix in repair 110mm bore PVC (SWR) vent cowl fitting as reqd to make the system functional complete all as specified and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specified and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) bends, or similar fitting are required to make the system functional complete all as specified and as directed.

Supply and fix in repair for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Material and labour for 75mm bore PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition of existing tarfelt any no of layers /plaster/Thermo seal etc in water proofing treatement to roof and cleaning the surface with wire brushes including removal of all dust or dirt etc to the distance outside the defence land complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 (12.5mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Material and labour for Rendering 10mm thick on concrete surface in cement mortar (1:3) with water proofing compound finishing even and fair without using extra cement as in under layer of roof treatement at any height complete all as specified and as directed. NOTE :- Water proofing compound shall be measured and paid separetely

Supply only Liquid water proofing compound complete all as specified and as directed.

Applying a coat of bitumen primer @ 0.3kg/Sqm conforming to IS 3384 and laving 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2kg per sqm and blinded with clean dry sand @ 0.5kg/Sqm over the APP memebrane complete all as specified and as directed.

Material and labour for applying two coat of solar reflective bituminious aluminium paint over APP memebrane @ 0.20Kg/Sqm complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty 3mm thick to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion upto height 10 mtr etc complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted upto any height including 3m thick birla white putty including necessary scaffolding etc complete all as specified and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including racking out joints hacking for key scrubbing down with water etc necessary scaffolding , ladder & formwork complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement and similar like upto 15 mtr height including racking out joints hacking for key scrubbing down with water etc necessary scaffolding , ladder & formwork complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and as directed.

Material and labour for complete removal of existing treatement on wall surfaces of any description including brooming down with steel wire brushing , scrapping down smoke soot's, moulds , moss and efflorescence, salts, trading oil greasy spots etc and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Material and labour for 15mm thick in cement mortar 1:3 mixed with WPC as in chajja/facia upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed.

Material and labour for preparation newly plastered surface of wall and applying two coat of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof prime upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed.

Material and labour for Providing precast cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in louvres and jallies, 40 mm thick and Set in Cement Mortar 1:4 including demolition of existing RCC jallies and removing the debris outside the defence land complete all as specified and as directed.

Supply and fix in repairs Wall Mixer telephonic type chromium plated with CP wall flange complete all as specified and as directed.

Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching, kerb, mud stop, rounded or chamferred on edges, coping including necessary formwork wherever required complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed.

Supply and fix in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.

Supply and fix Brass mortice lock , 4 Lever vertical type size 100mm etc complete all as specified and as directed.

Supply and fix floor door stopper of size overall length of cover plate 140mm of brass body and tongue with hard drawn steel spring etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and as directed.

Taking down MCBs with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed..

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring 1100 volt grade single core PVC and sheathed cable with multistranded copper conductor 1.5 sq.mm drawn in and including 20 mm dia med grade concealed PVC conduit on wall/ceiling including PVC insulated unsheathed earth wire with copper conductor of size 1.5 sq.mm & including MS rectangular flush metal box (measured seperately) suitable for modular fittings complete all as specified and making good diturbed surfaces for One Light / ceiling / exhaust fan/bell point controlled by one, one way switch complete all as specified and as directed.

Description all as per item no- 99 above but for one Light point controlled by one, 2 two way switch.

Description all as per item no- 99 above but for one 3 pin switch socket outlet, 5 Amp on the same board with other switches.

Description all as per item no- 99 above but for one 3 pin switch socket outlet, 5 Amp on the independant board with other switches.

Description all as per item Sl. No. 99 above here in before but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point.

Supply and fix switch modular single pole one way 6 Amps 230 V complete all as specified and as directed..

Supply and fix switch modular single pole one way 16 Amps 230 V complete all as specified and as directed.

Supply and fix switch modular single pole 2 way 6 Amps complete all as specified and as directed..

Supply and fix socket modular 2/3 pin 2 module 6 Amps 230 V complete all as specified and as directed.

Supply and fix socket modular 2/3 pin 2 module 16 Amps 230 V complete all as specified and as directed..

Supply and fix Modular metal flush box one/two module with inner plate complete all as specified and as directed.

Supply and fix modular metal flush box three module with inner plate complete all as specified and as directed.

Supply and fix modular metal flush box four module with inner plate complete all as specified and as directed.

Supply and fix modular metal flush box six/eight module with inner plate complete all as specified and as directed.

Supply and fix modular cover plate with frame one module complete all as specified and as directed.

Supply and fix modular cover plate with frame two module complete all as specified and as directed.

Supply and fix Modular cover plate with frame three module complete all as specified and as directed.

Supply and fix Modular cover plate with four module complete all as specified and as directed.

Supply and fix Modular cover plate with frame six module complete all as specified and as directed.

Supply and fix Modular cover plate with frame eight module complete all as specified and as directed.

Supply & fix moduar bell push ingle module 6 Amp 230 V complete all as specified and as directed..

Supply & fix ding dong bell AC 230 volt complete all as specified and as directed. .

Supply and fix ceiling rose surface PVC/Polycarbonate two to three terminals/plate complete all as specified and as directed.

Supply and fix modular fan step regulator electronic 230 volt AC.

Supply and fix lamp holder insulated body with back plate for angle/batten complete all as specified and as directed.

Supply and fixing LED 18W Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed..

Supply & fixing, LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified and as directed.

Supply and fix building security light fitting 35 watt LED with pre die cast aluminium housing, toughened glass and accessories complete incl street light bracket made out of 40 mm dia GI medium grade pipe 1.2 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp two coat of aluminium silver paint over a coat of primer complete all as specified and as directed.

Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 12 way with 200 Amps rated busbar flush/surface mounting. Double door including wooden board complete all as specified and as directed..

Supply and fix sheet metal enclosure DB double door Triple pole and neutral for 415 volts 4 way flush/surface mounting complete all as specified and as directed..

Supply and fix MCB Isolator TPN 415 volt 63 amp complete all as specified and as directed..

Supply and fix MCB Isolator SPN 240 volt 40 amp 10KA complete all as specified and as directed..

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and as directed..

Material and labour for sub main wiring with two run single core 4 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in PVC conduit/casing/caping & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and as directed. NOTE :- Three run of 4 sq.mm & One run of PVC concealed conduit with accessories shall be measured as One length.

Supply and fix ventilating air fan with double ball bearings non metalic body of sweep 250 mm sweep operating on AC single phase complete with louver shutter and connecting up 3 core PVC insulated PVC sheathed copper wire of size 0.5 Sqmm between ceiling rose and fan terminal complete all as specified and as directed. NOTE :- Old unserviceable to be submitted in AGE E/M Store

Taking down energy meter from its position & refixing electric energy meter any type/size including proper dressing with flexible pvc coduit pipe and including painting to meter fixing board complete with new wooden board of suitable size with fixing arrangement complete all as specified and as directed.

Material and labour for earthing complete with 17.2 mm Copper bonded Earthing rod including Short circuit testing , 3 mtr long and having copper bonding of suitable thickness and copper bonded terminal to connect earthing strip with suitable depth holes for nut bolts, buried directly and vertically in ground with top edge below ground level after making bore hole of required dia and suitable depth using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead strip with minimum two Nos of GI nut bolts and connected to test point from earthing pit. Area between pipe and copper rod filled with Dry type chemical powder.The electrode pipes should be filled with 2x 25 kg bags of carbide based BFC earthing compound . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Special high grade polymer compound Round earth pit with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 1 Oms including testing complete all as specified Make U-Protect or equivalent NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

Taking down & refixing ceiling fan 1200/1400mm sweep including two coat of synthetic enamel paint after cleaning,greasing and replacement minor parts if required such as nut bots , washers , rubber washer etc complete all as specified and as directed.

Taking down & refixing in position exhaust any sweep sweep including cleaning thoughrouly, greasing oiling etc and replacement minor spares in nature if any complete all as specified and as directed.