Civil and Electrical Works for Toilet Complex in township shopping complex cricket ground near school

Earthwork excavation by mechanical means (Hydraulic excavator) / manual means for ,foundations, trenches etc., not exceeding 1.50 m in width and depth in all kinds of soils including bailing of water, if necessary, dressing of sides, shoring, benching, levelling and ramming the bottom of trenches and disposing excess excavated soil as directed and to be levelled by breaking clods, if any and neatly dressed) within a lead of 50m, etc., all complete as per specifications and as directed by EIC.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including cost of tools, transportation etc., all as specified and directed by the EIC.

Providing and laying P.C.C 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) nominal mix by volume using 40mm and down graded size hard granite broken metal for foundation including ramming, curing, formwork, material, labour, tools etc., complete as specified and directed by EIC

Providing and laying squared coursed rubble stone (CRS) masonry (second sort) of approved size in CM 1:6 proportion for foundations and basement with splays and cutting built in proper bond, properly hearted, interstices filled with mortar and bond stones placed at every spacing of 1.5m in each course including leads, lifts and all other incidental and royalties operational charges etc. complete as directed by the EIC

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). etc including vibration, watering, curing, etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. (Steel reinforcement & form work shall be measured and paid separately.)

Providing and fixing reinforcement for all RCC items with Thermo-Mechanically Treated bars of grade Fe-500D or more of VIZAG / TATA make including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and tying with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, cost and conveyance of steel bars from approved sources to site of work,cost of binding wire, cover blocks,all wastages, all incidental, operational, labour charges such as lifting charges , cutting, bending, placing in position, tying etc., complete for finished item of work with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Providing formwork to slab, roofs, beams, lintels, slab with including strutting,propping etc. And removal of form work complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and constructing brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in CM 1:6 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Providing and constructing Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing Plastering internal/external walls, R.C.C work etc., with C.M 1:6, 20 mm thick using fine sand trowelled to even and smooth finishing including cost of all materials, labour, tools, curing etc. at all heights complete as directed, approved and specified by EIC.

Providing and fixing factory made P.V.C. door frame of TATA pravesh/ SINTEX/Rajshri make of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDMrubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. etc. including cost of all materials, labour for making ,fixing to the walls ,transportation, duties ,taxes etc. complete as directed and approved by EIC.

Providing and fixing factory made panel 30 mm thick pre laminated PVC door shutters ATA pravesh/ SINTEX/Rajshri make consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing including cost of materials ,labour,taxes,duties and all other incidental charges as directed and approved by Engineer In Charge.

Supplying and fixing white coloured glazed porceline European water closet (EWC) of Parryware/Hindware / Cera make with 'P' or 'S' trap with or without vent set, including supplying and fixing 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : fixing with brackets, double flapped anti microbial seat cover of durasheen model (E8292) , 40 mm dia PVC bend, 15 mm dia High density PVC inlet pipe connection- 45cm long, 15 mm dia CP angle stop cock with all above of approved make, colour etc. complete all as approved, specifed and directed by the EIC.

Providing and fixing Indian water closet White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests, squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Supplying and fixing 15mm dia GI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes including painting with anti corrosive bitumastic paint, and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.

Supplying and fixing 20 mm dia GI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes including painting with anti corrosive bitumastic paint, and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.

Supplying and fixing of white colour porceline counter bottom wash basin of 630 x 450 mm of Parryware/Johnson/Hindware/Cera make as approved ncluding supplying and fixing of 15 mm dia CP brass pillar cock(Push Type) of parryware, 15 mm diameter PVC water connection pipe of kohinoor make, 32 mm dia CP Waste coupling, 40mm dia PVC waste pipe including fittings and brackets PVC waste pipe, etc., all above of approved make and colour etc. complete all as specified, approved and directed by the EIC.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite of area > 0.5 sqm for toilet platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm of Parryware/Johnson/Hindware/Cera make C.P. brass spreaders with brass unions and G.I clamps, CP push cocks complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required unions and clamps (all in C.P. brass) with waste fitting,15mm dia PVC Connection pipe, 100mm dia PVC trap with outlet SS grating and other couplings in C.P. brass, 40mm dia pvc flexible waste pipe all as directed by EIC

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Providing, laying and fixing 110mm dia PVC SWR drainage/rainwater pipe of SUDHAKAR / PRINCE make fixed to walls, in floors including rubber rings, clamps etc including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

S&F 110 mm dia PVC plain / plug bend or offset of Finolex / Supreme/Prince make approved quality and make with air tight cement caulked / PVC cement solvent joints testing for leakages cutting/making openings in brick masonary / CRS masonry wall RCC, PCC etc for taking out the pipes and making good with CM including cost of all material labour wastages etc at all heights as directed and approved by EIC.

S&F 110 mm dia PVC single 'T' of Finolex / Supreme/Prince make approved quality and make with air tight cement caulked / PVC solvent joints testing for leakages cutting/making openings in brick masonary / CRS masonry wall RCC, PCC etc for taking out the pipes and making good with CM including cost of all material labour wastages etc at all heights as directed and approved by EIC.

Supplying and fixing 20mm dia Gun-metal, globe or gate valves of ZOLOTO or any approved make , with CI wheel head, screwed to both ends of GI pipe all as directed.

Providing and laying matt finished / anti-skid ceramic floor tiles in all colours, shades, except White, Ivory, Grey, Fume Red Brown, size 600x600mm, (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of NITCO / KAJARIA or equivalent make as approved by EIC, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including cost and conveyance of all materials to work site and all other operational and incidental charges, labour and lift charges, curing etc., complete for finished item of work.

Providing and laying of glazed ceramic wall tiles /dado in all colours, shades except burgundy, bottle green, black of size approximately 600 x 450 mm or any approved size , 8 to 10mm thick of NITCO / KAJARIA/SOMANY make of colour / shade as approved by the EIC, laid over 12mm thick CM (1:3) base coat and neat grey cement slurry of honey like consisteny spread at the rate of 3.3 Kg per sq.m and jointed approved tile jointer of matching shade including cost and conveyance of all materials to work site and all other operational and incidental charges, labour and lift charges, curing etc., complete for finished item of work.

Supplying and fixing on terrace (at all floor levels)high density polyethylene water storage tank of 1000 liters capacity, IS : 12701 marked,SINTEX or POLYCON make as approved by EIC colour of opaque white or as approved ,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and the base support for tank .The base support i/c fittings & fixtures for tank shall be paid separately. washout facilities with necessary GI Nipples, check nuts, rubber washers, plugs,20mm diameter PTMT Ball cock of approved quality, colour and of PRAYAG / SYMET makewith Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball with necessary polyethelene balls, connecting rods etc., etc at all heights as specified and as directed by Engineer-in-charge.

Supplying and fixing 15mm dia brass ball valve, for GI pipe of ZOLOTO or approved make with plastic floats complete all as directed by EIC.

Providing wall painting, preparing the wall surface and applying two coats of interior grade premium grade Acrylic emulsion paint having VOC content less than 50 grams/litre of approved shade over a coat of water thinnable cement primer having VOC content less than 50 grams/litre, both of ASIAN paints or equivalent approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage etc., complete at all as approved, specified, and directed by EIC. Contractor, at his own cost, should ensure all safety measures if work is carried out at heights .

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives on new work (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm of asian paints or equivalent product from Berger including cost of all materials, labour, scaffolding, wastages etc at all heights as approved and directed by EIC .

Providing and fixing aluminium sliding door bolts size 250 x 16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete.

Providing and fixing 125mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing 200mmx 10m long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing ISI marked aluminium 125 x 75 x 4mm butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete

Supplying and fixing of long body brass bib cocks with flange of 15mm dia of PARRYWARE/HINDWARE make as approved including the cost and conveyance of materials, Labour charges, incidental charges, taxes, etc., as approved and directed by the EIC

Supplying and fixing in trenches to proper level gradient and alignment, 150 mm dia glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) and jointing including testing of joints etc. complete including making connection to the existing man holes wherever required cost of all material labor except cost of earth work (excavation and back filling will be paid separately).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.

Supplying and fixing of brass angle stop cocks with flange of 15mm dia of PARRYWARE/HINDWARE make as approved including the cost and conveyance of materials , Labour charges, incidental charges, etc., as approved and directed by the EIC

Providing and fixing 180x150 mm size P type square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

MCB ENCLOUSER: Supply fixing, testing and proving of 2pole 16A rated MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

POINT WIRING for lights/Exhaust fan:Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. 1 Light points controlled by one switch 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.Make: Havells / fincab / Finolex

PROVISIONING OF MOTION SENSOR : Supply and fixing of Motion sensor for 20W 4 ft LED Light with all required fixing accessories and making interconnections completes as per site conditions. Make as per the direction of EIC. The scope includes supply and laying of 3 core 1.5 sqmm copper cable of approved make with flexible conduit. Make:philips/CGL/Wipro/Bajaj/ Havells or equivalent make.

Supply & laying of 10 sq mm weather proof twin core aluminium stranded service wire with supporting GI wire along with pvc tires/Aluminium link clips with proper binding of service wire as per site requirement. Make: Fincab/Nakoda/Payal

Supply & laying of 6 sq mm weather proof twin core aluminium stranded service wire with supporting GI wire along with pvc tires/Aluminium link clips with proper binding of service wire as per site requirement. Make: Fincab/Nakoda/Payal

EXHAUST FANS: Supply, Fixing of single phase 9 inch exhaust fan with double ball bearing along GI louvers suitable nut bolts and inter conection Make: Almonard/ Crompton/ Kaithan/ Usha

Supply and Fixing of Street Lights: Fixing and Testing of IP-66 LED street light luminaire of 60W with min 5000 lumens along with new arm on wall by supplying all required fixing accessories and with all inter connections and complete as per directions of EIC. Makes:Philips/CGL/Bajaj/Wipro

Provisioning of 1*20W LED tube light fittings: Supply and fixing of 4 ft 1*20W LED tube light fitting on existing wall with necessary fixing accessories complete as per site as directed by EIC. Philips/CG/Wipro.

Trench Making : Excavation of all kinds of earth up to depth of 600mm x 300mm as directed by EIC. The dug earth should be refilled after executing the work.

DWC Pipe:Supply and provisioning of 51/36 mm dia DWC pipe for routing cable throgh trenches as directed by EIC. Make: CPE/REX/Duraline

HAL/HD/CE/T/25-26/15

HAL/HD/CE/T/25-26/15

Civil and Electrical Works for Toilet Complex in township @ shopping complex/cricket ground, near school

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II