Construction of District Training Centre Building in Civil Hospital at Palwal (Pdg. EI and Street Light only)

Amount

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.Size 40 mm x 40 mm x 6 mm.

Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp.

Supply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator.Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection.Miniature circuit breakers of 9 KA breaking capacity.SP MCB 6 amp. to 32 amp.

Supply and erection of Fittings and Accessories.Bakelite angle / straight button holder large size.

Erection only of 1x40 watts or 2x40 watts 1220 mm long /1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod msde into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 65 mm dia.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections,digging and refiling of trenches. 25 Sq. mm 4 Core Cable .

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 16 Sq. mm 2 Core Cable .

25 Sq. mm 4 Core Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe.Fan Point Medium Point .

Long Point .

Light pointShort Point

Medium Point .

Long Point .

Twin control light point with 2 way 5 amp. single pole switch Long point.

Call bell point including M.S boxeof size 180 mmX100 mmX 60 mm deep for Call bell Long point

3 pin 5 amp. plug point including earthing the 3rd. pin etc.Short point.

Medium point.

Long point.

3 pin 15 amp. plug point including earthing the 3rd. pin etc. with 4 sq mm PVC insulated copper conductor cable. Long point.

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.Cable size 1.5 sq.mm(3/0.81 mm)

Cable size 2.5 sq.mm(3/ 1.05 mm)

Cable size 4.0 sq.mm(7/0.85 mm)

Cable size 6.0 sq.mm(7/ 1.05 mm)

Supply & erection of PVC conduit pipe ISI marked(Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection boxe and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.25 mm dia

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect.Fan Regulator

Supply and erection of moulded case circuit brecaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work.4 pole MCCB 100 amp.

Supply and erection of M.S box of size 8"x10"x4" (200mm x 250mm x 100mm deep) made of 1.6 mm thick M.S. sheet covered with 5 mm thick bakelite sheet with cost and fixing 4 nos. sockets and switch of 6 amp and one no. multi socket and switch of 15 amp including fixing of 1 no. fuse unit and indicatior of anchor make. the M.S. box duly recessed in wall including painting of M.S. box, cost of necessary cement and sand mixture complete in all respect upto the entire satisfaction of Engineer-in-charge of work. (for computer point )

Supply and erection of Double door sheet steel superline/ Powerline Vertical distribution boards suitable for TP/ FP veritcal MCCBs upto 125 amp as incomer (but without cost of MCCB) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (load line)12 way load line

Supply and erection of 70/72 watts LED street light fittng with lense, minimum 100 lumes per watt IP 66, HP dia cast aluminium hoising including erection of same on pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge.