Renovation of existing Common Toilets (4 Nos.) at Administrative Building Complex, KHPS, Umrongso, Dima-Hasao, Assam.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Sr. Manager (E/M) i/c C&P KHPS

Name of Work: Renovation of existing Common Toilets (4-Nos.) at Administrative Building Complex, KHPS, Umrongso, Dima-Hasao, Assam.

Contract No: NIT NO. KHPS/C&P/2026-27/522 Dt. 12.08.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures (excluding GST) To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 0.000 Cum Excess(+) Full Conversion INR

2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 0.999 Cum Excess(+) Full Conversion INR

3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 0.000 Each Excess(+) Full Conversion INR

4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 0.999 Cum Excess(+) Full Conversion INR

5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1 :4 (1 cement: 4 coarse sand) 0.000 Cum Excess(+) Full Conversion INR

6 15 mm cement plaster on rough side of single or half brick wall finishe with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) 0.000 Sqm Excess(+) Full Conversion INR

7 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles MatVAntiskid finish of size Size of Tile 600 x 1200 mm 0.999 Sqm Excess(+) Full Conversion INR

8 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm 0.000 Sqm Excess(+) Full Conversion INR

9 Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves, racks, almirah,cupboard and drawer etc. including necessary nails.screws etc. complete as per direction of Engineer-incharge. 0.000 Sqm Excess(+) Full Conversion INR

10 3 mm thick high pressure laminate (decorative type) with moulded/ extruded beading of appropriate design shape and size as permanufacturer's specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade ofshutter frame. Non decorative type. 0.000 Sqm Excess(+) Full Conversion INR

11 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm 0.000 Sqm Excess(+) Full Conversion INR

12 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) 0.000 Sqm Excess(+) Full Conversion INR

13 Finishing with Deluxe Multi surface paint system for interiors and exteriors Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture using Primer as per manufacturers specifications : 0.000 Sqm Excess(+) Full Conversion INR

14 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 0.000 Each Excess(+) Full Conversion INR

15 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 0.000 Each Excess(+) Full Conversion INR

16 Providing vitreous China Table Top wash basin with CI/MS brackets, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately). Jaguar Table Top Basin. 0.000 Each Excess(+) Full Conversion INR

17 Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. Jaguar Pop Up Waste Coupling. 0.000 Each Excess(+) Full Conversion INR

18 Providing and fixing Health Faucet with flexible hose pipe. Jaguar Health Faucet 0.000 Each Excess(+) Full Conversion INR

19 Providing and fixing Health Faucet with flexible hose pipe. Jaguar Health Faucet 0.000 Each Excess(+) Full Conversion INR

20 Providing and fixing C.P. angle valve for basin mixer and geyser points of approved quality. Jaguar Angle Cock 0.000 Each Excess(+) Full Conversion INR

21 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm 0.000 Each Excess(+) Full Conversion INR

22 Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. Jaguar Towel Ring 0.000 Each Excess(+) Full Conversion INR

23 Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar Pillar Cock 0.000 Each Excess(+) Full Conversion INR

24 Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore 0.000 Each Excess(+) Full Conversion INR

25 Providing and fixing toilet paper holder. C.P. brass 0.000 Each Excess(+) Full Conversion INR

26 Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating 0.000 Each Excess(+) Full Conversion INR

27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm nominal dia Pipes 0.000 Rm Excess(+) Full Conversion INR

28 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 110mm dia. 0.000 Each Excess(+) Full Conversion INR

29 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 63mm dia. 0.000 Each Excess(+) Full Conversion INR

30 Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (i) 110mm dia. 0.000 Each Excess(+) Full Conversion INR

31 Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (v) 110mm x 63 mm 0.000 Each Excess(+) Full Conversion INR

32 Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. ( a) In exposed surfaces or in trenches. (i) 110mm dia. 0.000 Each Excess(+) Full Conversion INR

33 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(v) 63mm dia. PVC cowel of ISI make 0.000 Each Excess(+) Full Conversion INR

34 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) 0.000 Each Excess(+) Full Conversion INR

35 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 0.000 Each Excess(+) Full Conversion INR

36 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm 0.000 Each Excess(+) Full Conversion INR

37 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm 0.000 Each Excess(+) Full Conversion INR

38 Reinforced cement concrete work in walls (any thickness}, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1.5:3 (1 cement : 1.5 coarse sand(zone-11I) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 0.000 Cum Excess(+) Full Conversion INR

39 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 0.999 Kg Excess(+) Full Conversion INR

40 Centering and shuttering including strutting, propping etc. and removal of form for: (iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers 0.999 Sqm Excess(+) Full Conversion INR

41 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick 0.000 Sqm Excess(+) Full Conversion INR

42 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 45 x 70 mm 0.000 Rm Excess(+) Full Conversion INR

43 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete.100x85x5.5 mm (heavy type) 0.000 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information