SPECIAL REPAIR TO BLDG NO 322 (CFF COURSE LINE) AND BLDG NO 3P 35 (KITCHEN AND 02 X TOILET BLOCKS AT AATS UNDER GE (EAST) AGRA

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on other than fair face of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 3mm thick wall interior wall care putty and a coat of primer complete all as specified and directed.

M&L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of 3 mm thick wall care putty and a coat of primer complete all as specified and directed.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. on wall and sanding of the putty surface with sand paper or other means by skilled labour and to make the surfaces smooth and free from dust etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 2% by weight of cement finished on fair face complete all as specified and directed. Note : Water proofing compound will be measured and paid separately under respective item of Sch ‘A’.

Supply only integral water proofing compound complete all as specified and directed.

Material & Labour for preparation of newly plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height (not.exc 11mtr) complete all as specified and directed.

Material & Labour for complete removal old plastered or unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height (not.exc 11mtr) complete all as specified and directed.

Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ-150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for railing etc complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirimng Fe 410 –W (Gde- E- 250) quality- A complete all as specified and directed.

S&F of Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick incl 20 mm thick screed bed in CM 1:6. laid and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab as in skirting 20-25mm thick incl 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-O using 12.5 mm graded stone aggregate as in sub floor complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

M&L for tubular steel framed work as in doors (as in chowkats) for double door frames of 2.5mm thick size 130 x 65 mm incl necessary fixings lungs, lock strike plate incl locking arrangement, hold fast and stainless steel hinges fixed to frame complete all as specified and directed. Note :- Weight of tubular steel section is not less than 6.99 Kg/RM.

S&F of 35 mm thick, factory made, IInd class hard wood (Sal) Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick, factory made, llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F Brass barrel tower bolts 200mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all specified and directed.

S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F 100 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F Extruded aluminium alloy handles size 125mm, fabricated type, anodised complete all as specified and directed

S&F Extruded brass handles size 150mm, fabricated type polished complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

S & F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S & F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F of 5mm thick glass beveled edge mirror with wooden batten of any shape and size fixing to wall with suitable assembly complete all as specified and directed.

Mirror polishing on existing Kota stone/granite stone to give high gloss finish complete all as specified and directed.

M&L preparing old surface of ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed.

M&L for preparing old steel surface and applying one coat of synthetic enamel paint to steel surface of any description n exc 10cm width or girth complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed or louvered type glazed window /ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.

S&F powder coated anodized aluminium door & frame for door, windows and ventilator with one or more rebates incl joining cleat for fixing etc of weighing 0.55 kg/m complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, stopper etc. complete all as specified and directed.

S&F for 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed to aluminum window and ventilator n exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as specified and directed.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed.

S&F Brass, sliding door bolt 300mm length with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S& F 100mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F in repairs aluminium dia cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and konbs and including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic (floor, dado) including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

M & L HD polished wall tiles 300x600x 7 mm thick as in vertical surfaces such as skirting/dado etc set incl jointed in neat cement slurry 10mm thick in CM 1:3 for fixing tiles & pointed in white or coloured cement to match complete all as specified and directed.

M & L for joint free non skid ceramic coloured tiles, type double charge not exceeding 0.36sqm and 10mm thick as in floor etc set incl jointed in neat screed bed or bedding layer of mortar 15 mm thick in CM 1:6and pointed in white or coloured cement to match complete all as specified and directed.

S&F in repairs wash basin superior quality 635x485x305 mm size fitted to wall with overflow hole and tap hole smooth glaze surface including all fitting accessories and waste coupling and suitable size bottle trap complete all as specified and directed.

S&F in repair single piece EWC with UF seat cover himges, fixing accessories set ,cistern fittings, rim less tornado flushing size 385x720x715 mm complete all as specified and directed.

S & F in repairs CP health faucet with wall hook and 1 mtr SS braided connection pipe, fancy type with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.

S& F in repairs sensor type urinal full install fixed to wall incl bottel trap, brackets for fixing to wall, couping with waste pipe size 360 x 360 x 650mm etc complete all as specified and directed.

S&F in repair 15 mm bore, brass chromium plated wash basin mixer sensor type with 300 or 600mm braided connection pipe (without pop up ) for making hot & cold water screwed down for pipe and fixed complete all as specified and directed.

S&F in repair Angle valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed to bore of pipe 15 mm , complete all as specified and directed.

S&F in repair Angle valve/Angle cock (two way) cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed to bore of pipe 15 mm , complete all as specified and directed.

Supply & fixing C.P. grating 100/125(with or without hole) mm dia as reqd at site complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail 20 mm dia D type 600 mm long between flanges complete all as specified and directed.

Supply and fixed in repair 10 mm thick glass corner shelf set of 3 Nos (size 200mm, 250mm & 300 mm) complete all as specified and directed.

S& F in repairs CP plated bottle trap of dia 32 mm dia heavy duty type for wash basins and urinal with inlet and out let screwed for pipe or connections including all connected fittings including cutting chasing in wall complete all as specified and directed.

M & L glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 300X 7mm thick as in vertical surfaces such as skirting/dado etc set incl jointed in neat cement slurry 10mm thick in CM 1:3 for fixing tiles & pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in 7mm thick as in floor etc set incl jointed in neat screed bed or bedding layer of mortar 15 mm thick in CM 1:6and pointed in white or coloured cement to match complete all as specified and directed.

M& L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps, cills, jambs, pillars, window cills, cooking platforms incl screed bed of cement mortar (1:4) 15mm thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles and removing dabris outside MoD land complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (old size), straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) set in CM 1:6 for kitchen cooking platform and similar articals with plane faces incl form work complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections etc including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pining in making good in CM 1:3 for concealed water tubing, cutting n. Exc 10 cm complete all as specified and directed.

S & F 15 mm dia GI tubing medium grade with all fittings laid in floor / fixed to wall complete all as specified and directed.

S&F in repairs double bowl kitchen sink without drain board made of stainless steel 0.80mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes each bowl size 410mmx330mm x160mm complete all as specified and directed.

S&F in repairs 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

M & L second class hardwood in scantlings timber framed screw to wall , rectangular , clean sawn, secured with nails or beads complete all as specified and directed .

S & F in repair Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required frame as per site requirement. Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

S&F soft close cabinet hinges for kitchen cabinets/cupboards complete all as specified and directed.

S&F cupboard drawer channel set complete all as specified and directed

S&F in repair Continuous (piano) Stainless steel hinges width of flaps (when open) in 40mm, complete all as specified and directed.

S & F in repair stainless steel 40mm dia decorative knob brass polished for kitchen cupboard complete all as specified and directed.

S & F in repair Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S&F in repairs hand towel dispenser aquarius slimroll allowing for quick and easy one wipe clean for washroom fixed to wall weight 2.3 kg dimension 36.5cm x 30.5cm complete all as specified and directed. Make: Kimberly clark professional model No 7955 or equivalent as approved by GE.

S&F in repairs lead free soap dispenser rectangular shape fixed to wall dimension 11.6 cm x 11.4cm x height 23.5 cm weight 390gm complete all as specified and directed. Make: Kimberly clark professional model No 6948 or equivalent as approved by GE.

S&F of brass mortice lock of size 100mm and 2 levers complete all as specified and directed.

SF fixing in repairs automatic white hand dryer cutting edge design for superior drying efficiency and hygiene weight 2.57kg and size 30.4x 24x 19 cm complete all as specified and directed. Make: Euronics Industries Model No EH04 or equivalent as approved by GE.

M & L for complete removal existing treatment from old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of 3 mm thick wall care putty complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, fan regulators, ceiling roses, pendants, lamp holders incl CFL/Bulb, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removing from site complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note : Heavy duty Conduit shall be fixed on surface of roof with necessary saddles without any extra cost where concealing of conduit is not feasible for the following :- (a) One light point or one fan point controlled by one switch

(b) One 3/5 pin socket outlet 5 amps on the same board with other switches.

(c) One 3/5 pin socket outlet 5/6 Amps on independent board.

All as per item No 98.00 here in before but with cable FRLSH size 4 Sq mm for one 15 Amps / AC socket out let with multistrand insulated copper earth continuity conductor FRLSH of size 4 sqmm.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fix socket 5 amps 3 pin flush type, 240 volts with polycarbonate body complete all as specified and directed.

Supply and fix socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fix ceiling rose, PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

Supply and fixing in repair Lamp holder/angle holder insulated body with white plate for batten fittings including 12 watt LED Bulb complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20W) luminaire lumen >2000 lm, system efficiency of >100 lumens /W, with Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangements for fixing the light fitting and writing the date of fixing on security light with permt marker complete all as specified and directed. Note:-The period of defects liability shall be 02 Years from the date of installation of security light.

Supply, fixing, connecting & testing ceiling fans complete with blades, suitable size of down rods, and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), and including necessary hanging arrangement fan hook & clamps and connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply, fixing, connecting & testing factory made, epoxy powder coated, distribution board (sheet metal encloser) , triple pole and neutral, 4 ways, (Vertical DB's) Ekinox³ TPN DB-VTPN DPX³ 160 MCCB DB's5, IP 43, IK 09 with metal door, As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing complete all as specified and directed.

Supply and fixing MCCB 4 pole, 160 Amps, 50 Hz, Icu=36 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) single pole of capacity 6-32A Amps rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) single pole and neutral of capacity 40-63 Amps rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F sub Main Wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit medium grade not less than 25mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete. (NOTE : Two run of single core PVC cable with one run of earth conductor and one run conduit /batten shall be measured as one unit.)

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 complete all as specified and directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 Core complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. (designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and directed.

Supply and lay Tubes, 'light grade' galvansized 40mm dia for cable protection with all fitting and fixed complete to walls and ceiling or laid in floors/road crossing complete all as specified and directed.

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular step type, 2 module electronic fan regulator heavy duty 120watts 240 volts, complete all as specified and directed.

Supply and fixing in replacement round shape down lighter 15 watt 220 volts AC recessed type within built motion sensor for auto switching off/dimming when the space is not occupied, high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supplying and fixing LED Batten 20 watts with Opal Diffuser, IP20, Inbuilt Motion Sensor based Auto Dim/Brightness/ON/OFF, surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified and directed.

Supply & fixing LED security light 20 watt with inelligent smart sensor for automatic switch ON and switch OFF operation based on ambient lux level, aluminium pressure diecast housing, IP 65/IP 66 protection, luminaire lumens > 100 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 40 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps of suitable size to be tightened with suitabe size of bolts, nut and washers and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified & directed.

S & F PVC body Exhaust fan against BER, 300 mm sweep, AC, RPM 1200, copper windings, single phase complete with all accessories and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed. Note : Quoted rate is deemed to be included round hole cutting in the wall and making good the surface to match with the existing surfaces.

M/s Krishna Construction Company (BID ID -3307657)

m/s meetu enterprises (BID ID -3308856)

RAJEEV CONSTRUCTION (BID ID -3309285)

M/S APOORVA CONSTRUCTION (BID ID -3315328)

BUILDTECH ASSOCIATES (BID ID -3308150)

M/s Srijan Construction Company (BID ID -3309217)

M/S RISHI RAJ AGRAWAL (BID ID -3304075)

R.S BUILDERS (BID ID -3315094)

Bidder Name

M/s Krishna Construction Company