Beach front development along with Cycle track at Neelankarai

Amount

Clearing scrub Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete complying with standard specification.

Construction of Embankment with approved Earth materials deposited at site from roadway cutting and excavation from drain and foundation of other structures, graded and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Laying the Plain Cement concrete 1:4:8 (One cement four sand and eight broken Machine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

For Plane surface such as vertical slab ,slide slab of boxing, vertical drops, facia, vertical wall, etc.

Providing And Laying In Position, Standardised Concrete Mix M-40 Grade In Accordance With 15:456-2000, Using 20mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 440 Kg/M3 And Maximum Water Cement Ratio of 0.10, Including Admixture (Plasticiser / Super Plasticser) .In Recommended. Proportions As Per Is:9103. to accelerate, Retard Setting of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.m.) 7730 Kg. of 20mm Machine Crushed Stone Aggregate And With About (3.3 Cu, M.) 5136 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Tisdae of Materials) (If pumping of Concrete is required).

For Foundation and Basement for 1.0 Cum

Providing And Laying In Position, Self Compacting Concrete Mix M-40 Grade In Accordance With 15:456-2000, Using 20mm And 12.5 mm Down Graded Hard Broken Granite Stone Jelly For all Rcc Items of Works With Minlinum Cement Content of 420 Kg/M3 And Maximum Water Cement Ratio of 0.35, admixture (Plasticiser / Super Plasticser) in ratio of 0.6-1 .In Recommended. Proportions As Per Is:9103. to accelerate, Retard Setting of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.m.) 7730 Kg. of 20mm Machine Crushed Stone Jolly And With About (3.3 Cu, M.) 5136 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Renforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Tisdae of Materials) (If pumping of Concrete is required).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Pergola, Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections confirming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes. The rate including cost of all materials, labour charges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. All MS members shall be painted with one coat of zinc chromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval:

Brick work

Flyash Masonry in cement mortar 1:5 (One cement and five sand) in foundations, basement and superstructure walls using second class ground moulded chamber burnt bricks of size 9”x 43/8”x2 3/4” etc., complete complying with standard specifications and drawings and as directed by departmental Engineers

Flyash partition wall in CM 1:3 (One of cement and three of sand) 11.50CM thickness using Second class chamber burnt bricks of size 9”x 4 3/8”x2 3/4” including both side plastering with CM 1:5 12mm thick and using hoop iron with reinforcement if found necessary. The loop iron shall be should be supplied by department at free of cost.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails.

Plastering

Plastering with cement mortar 1:3 (one cement and three sand) 20mm thick with fine river sand flooring including curing, neat finishing, etc., complete complying with standard specification and as directed by the Departmental officers.

Painting

Supply and applying water proofing treatment on Retaining walls external surface at Basement, UG Sump, Water tank, Raft sides etc. using cement admixed with water proofing compound in the following order.

i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement

ii) Supply and Fixing of 50 long 18 mm dia GI nozzles in the hole of about half the depth of member size along construction joints, and honey comb areas at a spacing not more than 1m c/c.

iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement.

iv) Sealing & cutting of nozzles and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

v)Supply and applying one coat of TAPECRETE Acrylic Polymer Modified Cementitious Slurry Coat over well prepared surface as a Primer and applying CICO CORCHEM 206 - I Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm in 2 coats over TAPECRETE slurry coat applied surface.

vi) Lay protective plaster layer with 12mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand) admixed with Normal setting integral Waterproofing compound CICO NO.1 or approved equivalent conforming to IS 2645 at the rate of 2% by weight of cement over the third coat of brush topping. Plaster shall be cured by spraying of water for the next 7days. The entire water proofing system shall be protected with a 25 mm thick extruded polystrene with necessary low VOC adhesieve.

Supply and laying of respective water proofing treatment at below mentioned locations including all below activities. The surface to be waterproofed shall be cleaned to ensure it is free of laitance, loose particles, oily substance which may affect the adhesion of the waterproofing system, using mechanical rotary wire brush and related tools etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, staging, tools and plants, fuel, curing, cleaning, testing, consumables and also include for conducting leakage test at toilet sunken portion and over head tanks by storing water on the sunken continuously for a period of 7 days etc. as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and laying water proofing treatment Internal surface of Basement Retaining wall etc., in the following order and consisting of following operations.

i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and clean the surface with wire brush, and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement

ii) Supply and Fixing 18 mm dia GI nozzles (the hole shall be about half the depth of the member to be grouted and nozzle should be 50mm) the retaining wall, along construction joints, and honey comb areas at a spacing not more than 1m c/c . Nozzles (can also) shall be post fixed by drilling holes using drill machine and to be fixed with cement putty admixed with quick setting integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight .

iii) Supply and Applying injection grouting through the nozzles by hand operated grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement .Grouting operations to be taken up after the concrete reached the full strength, i.e 28 days after casting of concrete.

iv) Sealing off the nozzles after grouting operation is over with cement putty admixed with quick setting integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

v) Cut the projected nozzles if required over the concrete surface and fill with cement putty admixed with quick setting integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

Supply and laying of respective water proofing treatment at below mentioned locations including all below activities. The surface to be waterproofed shall be cleaned to ensure it is free of laitance, loose particles, oily substance which may affect the adhesion of the waterproofing system, using mechanical rotary wire brush and related tools etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, staging, tools and plants, fuel, curing, cleaning, testing, consumables and also include for conducting leakage test at toilet sunken portion and over head tanks by storing water on the sunken continuously for a period of 7 days etc. as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and laying water proofing treatment on top of PCC laid for Grade slab, Raft, Pile cap ,footing & beam, UG Sump , Water tank etc., in the following order and consisting of following operations.

i) Supply and applying of one coat of TAPECRETE Acrylic Polymer Cementitious Coating over rendered PCC surface. Application of CORCHEM 206 – I High Build Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm in two coats over TAPECRETE applied surface.

ii)Supply and Fixing 75 mm long 18 mm dia GI nozzles in the hole of about half the depth of member size in grid pattern at a spacing not more than 1.0 meter c/c while casting the raft slab and along construction joints at a spacing not more than 1.0 meter c/c along the construction joints.

iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement.

iv) Sealing & cutting of the nozzles, and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :

Supplying and painting of 2 coats plastic emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block -63mm thickwith C.M 1:3 pointing over Sand filling bed compacting, sand brushing and cutting, levelling, transporting etc., complete with the natural grey colour blocks, as directed by the Departmental Officers.

Dadooing wall tile size of 300x450 mm with following best approved quality, Designed colour ceramic tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Providing anti-skidCeramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc complete complying with standard specifications and as directed by Departmental Officers

Weathering course-using Concrete broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope and thickness required etc complete complying with standard specifications and as directed by Departmental Officers.

providing and laying precast saucer type drain of size 600x300 x 50mm with M30 GRADE concrete including the Cutting of the existing bituminous surface of 10 cm thicckness and PCC of 1:3:6 for leveling and maintain the gradient to drain the water from raod to Storm water Drain etc and complete

Providing and fixing Granite Slabs (Super Fine Polished with Machine Cut Edges) 20mm thick for PLATFORMS, seating top finished copping, etc., of approved quality for wash basin/ vanity counters,pantry etc. of required size of approved shade, colour, and texture laid 20mm thick base cement mortar 1:3 (1 Cement:3 M Sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including machine polishing to edge to give high gloss finish, providing machine cut opening for fixing wash basin, rubbing, curing, moulding & nosing etc. complete at all levels as directed by Engineer-in-Charge.

PEDESTRIAN & CYCLE TRACK SYSTEM – laid as outdoor resilient medium-hard acrylic flooring system. It should have Combination of wet-pour acrylic coatings in total average thickness of 3 mm and should have Certified by LABOSPORT Institute for cycling sports. The system should consist of application of RIΤIVEX R LIQUID 1102 - Acrylic primer at 0.2kg to .3kg per Sq. Mtr. When the same is tack free application of ELASTOSPORT 853 - Acrylic, one component, smoothing and repairing wet-pour resurfacer for sports floors systems that should have 35,000 – 45, 000 mPAS as viscosity and density of 1.7 kg – 1.8kg applied at 2kg per Sq. Mtr in two layers. After drying of the above application of CORRIDOL 864 - Acrylic, slip-resistant coating, UV resistant coating at 1.5kg per Sq.mtr in two or three layers. The system should be applied over the subbase approved by the applicator of sports flooring systems The product should be manufactured by KDF LTD and CERTIFIED BY LABOSPORT Institute for professional cycling sports or may be executed by an equivalent product with same specification. Work and rate should include supply and apply of the system, adhere to the manufacturer recommended methods and specifications and to include transpsorts, tools and tackles, insurance, all leads for lifts and heights to the complete satisfaction of the Engineer In Charge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply and fixing of ploycarbonate sheet 6mm thick as per architectural drawing.

Pathway work components - Wooden decking as per the specifications

Excavating 0.15m X 0.15m size pile using machine upto depth of 1m/1.5m - Supplying and fixing of 92mm X 92mm X 1m/1.5m height woodenpegs in Babool wood (vachelia nilotica) ,with runners 92mm X 65mm - 2138 M - Red Maranti (high density) or Nellarai wood or Babool including necessary treatment and side bracing 120mm x 30mm - 538M. in Red Maranti (high density) or Nellarai wood or Baboolwood (vachelia nilotica) including necessary treatment, Decking with Brazilian IPE wood – walkway decking, IPE wood plank dimension – 65mm -115mm (90mm) width x 19mm (+\- 1mm) thick random length 1000 -2000 mm. Railing for different height with of timber balustrade 50mm x 50mm X1100mm in Babool wood (vachelia nilotica) . Inclusive of Wood Plastic Composite (WPC)horizontal railing members at 860mm height from decking floor level; Dimension: 0.07m width X 0.04m height . And Sectioning and levelling12 Refilling with existing earth in regular layers of 150mm thick including watering and consoildation. incljusive of Markings & Signage. All as per standards, anti termite protection and epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc.

Pre fab Puf panel Security Cabin 6’x4’x 7’ Height with I n s i d e Writing Pad, Inside Light- 1no,Switch and Scoket-2No’s, ,BulkHead Fitting - 1no with 18mm Cement Board with Vinyl Flooring.(Aluminium Sliding window1mx1m -3No’s, )

Supplying and laying of Sand Gravel Mix in ratio 1:1 for each layer laying of 15 cm thick using 0.631 m3 of sand fo filling and 0.675 M3 of red gravel of 1m3 of volume including cost of sand gravel mix including labour charges for mixing , laying compaction all tools and planks employed etc.,complete complying with standard specification and as directed by the departmental officers.

Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges tc.complete as per clause of 401 MorthSpecification using Grade V metals for Bottom layer - BRR -GSB-1

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery,fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only If Work Is Done During Night) - BRR -WMM(N)

Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) ( Procured from State/ Central Public sector undertakings only) Including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of Mort & H Specifications. (This rate is applicable only if the work is carried out during Night.) BRR - TC11(N)

Providing and laying upto 75mm consolidated thick Dense Bituminous macadam using 0.40 cum for 37.50-13.20mm, 0.35 cum of 13.20- 2.36mm and 0.36 cum of 2.36mm & below size IRC metal with 71.30 kgs of VG30 bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 tonne CMP with bitumen boiler, tipper trucks,9m paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH rev-5.[The Rate Is Applicable Only If It Is Laid By 9M Paver Finisher] (For Profile Corrective course). BRR - DBMC8 (9m) (V)

Providing and laying Tack coat over the existing bituminous surface using 2.0 kgs of bitumen emulsion (Rapid Setting 1) ( Procured from State/ Central Public sector undertakings only) per 10 Sq.m area including cost of bitumen emulsion at the site, including labour charges for preparing the surface, and applying the required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete as per Clause 503 of MoRT&H Specifications Rev.5 (This rate is applicable only if the Work is carried out during NIGHT) BRR -TC13(N)

Providing and laying Bituminous Concrete to 40 mm thick using 0.13 cum of 19.00- 9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG40 bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller & Pneumatic Roller to the required density etc.including labour for attending to paver to site etc., includinghire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 (This Rate Is Applicable Only If The Work Is Carried Out During Night And If It Is Laid By 9M Paver Finisher). BRR -BCCMP (VG40) (N-9m) (V)

Supplying and Fixing of Pebble stone in walking track with 30 mm thick Cement mortor 1:3 ratio base layer and fixing the sone with cement slurry over the base mortor surface as per the pattern drawing given by the department officers the rate including cost of gravel stone cement mortor, labour charges transportation loading & unloading, curing, etc.,completed as per the standardspecification and as directed by the department office

Supplying and fixing Brazilian IPE wood – walkway decking, IPE wood plank dimension – 65mm -115mm (90mm) width x 19mm (+\- 1mm) thick random length 1000 -2000 mm. Fixing the decking including labor charges, L cleat or SS screws and necessary treatment as per standards,anti termite protection and oil coating. cost including grooves, labour, transportation , etc. complete. FFL of decking to be flushed with sand level as per architect's specifications.

Providing And Fixing All Side Machine Cut Granite Stone Using 0.6M Height 0.100M Thick And 1.0M Length Granite Stone Without Fragmentation For Centre Median Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete.

Play Equipment

Providing and supplying of cast iron bench of size - 1400mm(L) x 487mm(seat ht) x 800mm ht (total ht) with design legs with size of 3" x 1" wooden strips . Total weight of bench of 45 kg and bench weight capacity 170 kg. Colour finishes as per architectiural drawing with one year warranty.

Supply and fixing of Rough Granite stone seating in 2 ft height and finishes as per architectural drawing .

Supply and fixing of FRP SWING (Single swing with belt Assembly) Swing 1 Seaters Frame made of 2 inch Stainless Steel pipe and 1 ½ inch supporting pipe Height 7 ft and breadth 5ft. Seats made of FRP moulded materials with heavy duty chain.

Supply and fixing of Kiddies Fun Station Height:141/2’, product size:22’*70’, lader:1 ¼” GI pipe,3/4”GI pipe, 2.5mm thickness,B class,leg:21/2” GIpipe,2.5mm thick,B class,railing:1”&1/2” GI pipe, 2.5mm thick, B class, bed:1 ¼” GI pipe, 2.5mm thick,B class, Roller slide:2”angle,1” GI pipe, 2.5mm thick, B class, square climber:1”&3/4”GI pipe, 2.5mm thick, B class, rope climber:1 ¼” GI pipe, 2.5mm thick, B class, FRP tunnel size:3’, twin slide:9’, paint: pu coating

Supply and fixing of See-Saw 4 Seater FRP: Height :1 ½ ‘ft Width :5’ftFrame : 1 ½” Galvanished ‘B’ Class pipeSee saw Rail :2” Galvanished ‘C’ Class pipeSeat : FRP Seat with 450 CSM Mat 3 Layers bonding.Seat : FRP Seat with 450 CSM Mat 3 Layers bonding.Isotolic gel coat with UV pigment.Painting with PU coating seat size : 15”ft * 14”ft Productarea : 5’ft * 10’ft Play area:8’ft * 12’ft

Supply and fixing of Merry go round – 6 Seater (FRP) Height :3” GI Pipe, 2.5mm thick, b class Seat size:15” X 14”, paint: pu coating

Supply and fixing of Double Bar / Parallel Bar Frame:1/2”GI pipe, 2.5mm thick, B class, height:41/2’, product size:6’*2’ paint: pu coating

Supply and fixing of SIT UP & PUSH UP BENCH (SINGLE) Abdominal muscles, upper Leg muscle and Back muscle exercise. Also strengthens Arm Shoulders muscles. Size: 1650 x 750 x 1400mm – 4mm pipe Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coated Powder coating, Heavy duty sealed Ball bearing, for long lasting life.

Supply and fixing of ARM & SHOULDER WHEEL Supply, Erection and Fixing of Arm & Shoulder Wheels 1300 x 1200 x1350 mm 4mm pipe Main Post made of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coat Powder coating, Heavy duty Branded sealed Ball bearing, for long lasting life.

Supplying and fixing of Black colour Granite150mm diabollard with height 900mm tall as per required area with proper finish curing compacting, levelling, required slope maintaining etc., complete as directed by PM/EIC.

Design, fabrication and installation of simple vault tensile fabric work and Steel structure using Belgian make tensile polyester fabric, steel frames by ISO standard acclaimed CE certified installer with structural stability vetting from Anna university ,Chennai having using FLUOMAX Coated Architectural Membrane having tensile strength not less than 4300 N/50mm/ 4200 N/50mm (Warp/ Weft) and Tear strength not less than 600 N/ 500 N (Warp/ Weft) of make SIOEN Belgium or equivalent, cables, complete perimeter attachment system, and all normally associated components with machines for Fabrication using swiss make Zund cutting machine and Belgian make Architectural Membrane on 20KW Forsstrom High Frequency Welding Machine with SEAMLESS WELDS 50 mm weld width X 1400 mm- Single Stroke all PVC joints shall be formed to a tolerance of +1mm, -1mm and shall be assembled to ensure that seams are always single laid and attaining seamless finish by that a cut edge does not face uphill and membrane used to have a double lacquering made out of highly concentrated FLUOMAX PVDF on both side, double PVC coating and be weldable without grinding to

Conveyance of Earth/Debris to a lead of within 30 km from site as directed by the Engineer inculding loading, unloading, hire charges for vehicle and other incidental charges etc., all complete as directed by the Departmental Officers.

Joinery

Providing of 35mm thick factory made pre - laminated ABS ( Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent desings consisting of all round frame made out of water proof solid PVC bar of size 20 X 32 mm reinforced by 32 X 32 mm 2 nos ., for vertical made out of LVL core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre- laminated ABS sheets thickness of 1.5mm PVC edge bending of size 0.45mm on the vertical sides. hardware made out of steels coated butterfly hinges - 3nos for each shutter and ISI make SS round lock Complete complying with the standadrd Specification . the door shutter and frame should be got approved from the Departmental Engineer before on use

UPVC Window :Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Suppy and fixing of terracota jally of 200x200x75mm as per drawing which includes material, labour and tools tackles etc. The terracota jally should be got approved from the Executive Engineer before use on work

Plumbing

Supply of 2000 ltrs PVC Sintex water tank including cost of materials

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing the best quality approved make of bib cock with cp health faucet wall hook 1m long flexible tube angle cock with wall flange incuding cutting and making the walls whereever etc, complete complying with standard specifications and as directed by the departmental officer the quality and make of health faucet should be got approved by concerned department engineer before use of work.

Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work.

Supplying and fixing in position Mirror of size 500x450mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Wash Hand Basin of size 550 mm X 400 mm without pedastal with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work.

Lipped Mouth Porcelain white Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.e Engineer-in-Charge.

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.

Cost of 25mm dia U.P.V.C Ball Valve

Cost of 32mm dia U.P.V.C Ball Valve

Cost of 40mm dia U.P.V.C Ball Valve

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of UPVC pipes and specials should be got approved by Concern department Engineer before use on work.

Main data 32 mm dia UPVC pipe

Main data 40 mm dia UPVC pipe

Providing enamel indication board with proper male or female figure of size 35x30cm as directed.

Supply of Compactor Bin 1100 litres made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

Supply of Penguin dustbin FRP – 2 Layers to a height of 3½ and width of 2½

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position C.I.Nahini trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying and fixing in position the best quality and variety sizes PVC soil waste pipes 6Kg cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work..

110mm Dia

75mm Dia

Supplying & fixing of SFRC Manhole cover of size 600mmx600mm complete and as directed by the departmental officers..

Construction of inspection chambers of following sizes 60 x 60 x 150cm with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M.1:4:10 using 40mm Brick jelly for foundation, brick work in C.M. 1:6 for chambers, plastering with C.M.1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M.1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve 20mm dia with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supply and fixing of 30 meter in length PVC braided water Garden hose is extremely pressure-resistant and keep its shape, durable resistant materials as per Engineer in Charge. The rate inclusive of necessary fittings and Transport charges .

Supply and erection of 2.Hp Submersible Pump set using nylon rope including cost of motor , fixing necessary cable charges and labour charges etc., complete

Supply and erection of 3.Hp Submersible Pump set using nylon rope including cost of motor , fixing necessary cable charges and labour charges etc., complete

Landscape work

Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.

Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller.

Planting of Dracena marginata ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Raphis palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Ixora hybrid foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Phoenix dactylifera palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Heliconium foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Galphimia Plant foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of pinus thunbergii tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge.

Supplying and Planting of coconut tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge.

Supplying and Planting of borassus flabellifer palm variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Sabal palmetto variety of height 180-210 cm in polythene bag of size 16x16 inch including supporting stack of 5cm dia casurina pole of 10' height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-

Supplying & fixing of Sign boards in bamboo pole, connecting the vertical & horizontal pole by fish mouth connection or peg-and-hole connection or screw method. Rectangle indication of (600mmx300mm) bamboo board can be tied with SS chain on top horizontal bamboo pole in which lettering should be made out of paint. Bamboo protector coating should be applied before placing it in the ground/footing which preserves the bamboo and protects it from rot.(as per quote)

Maintenance of garden for a period of six months including all required materials and man power etc., all inclusive.

ELECTRICAL

TNEB METERING BOARD Supply,installation and commissioning of TNEB Meter Board suitable for 3 Phases 100 A service connection made up of suitable iron angel frame work of size 2 feet x 1.5 feet using angle iron of size 1 1/2" x 1 1/2 " x 1/4" rigidly fixed on wall covered with Hylem sheet of size 2 feet x 1.5 feet of 12 mm thickness with necessary bolts and nutts supports and Supply,installation and commissioning of 3 nos 100 A fuse units (500V) ,1 No Neutral link ,Copper flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection and to complete the work etc.

125A Isolator Switch- Supply and fixing of 125A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

LT Panel Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. Incoming 1 No: 100A TPN 16 kA MCCB with Changover Switch Incomers shall have 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter and KWH meter). 1 set - LED type RYB,ON,OFF,TRIP indication lamps. Panel mounted Earth Leakage Relay with Leakage current display. 1 set -100 /5A CT CL 1.0 10VA. Outgoings: 4 Nos - 63 A 16KA TPN MCCB. 2 Nos - Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S with RS485. Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. Note:-The panel should be having provision to monitor the On, Off, trip status. BUS BAR RATING: 100A TPN 16 KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus. Earthing : 25 x 6mm Aluminium flat . Cable Entry & Exit : Top. Cable Gland Plate : 3mm thick MS sheets Note: All MCCBs shall have rotary handle mechanism and spreader wherever necessary.

Supply and erection 6 WAY 3 PHASE Vertical DB of powder coated wall mounting TPN DB made of 1.6mm thick CRCA sheet steel dust and vermin proof enclosure with suitable size of bus bar with suitable bus insulators and sleeve for main and interconnecting Switchgear, earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel. ( For Power Distribution , Street Light & Landscape Lighting) Incoming : 63 A 4P MCB - 1 No Outgoing : 32A TP MCB 10kA - 6 Nos

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 16A SP MCB as outgoing in flush with wall with earth connection only with 24 hrs digital timer and contactor relay

Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one no. 4 pole ELCB / RCD (totally 4 ways in one segment) (3x 4 ways in each segment) and separate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.

Supply, run, testing and commissioning of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes

Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 31/2 x 35sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 4CX4 sqmm Cu. armoured LTUG Cable in the existing cable trench

Supply and laying of 3CX2.5sqmm Cu. armoured LTUG Cable in the existing cable trench

Supply and clamping of following XLPE armoured LTUG cable on post or on wall MS-Clamps , Saddles, plugs, Screws etc., as required.

Supply and Clamping of 3 1/2 core x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2 core x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 4C x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection.

Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection.

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 4C x 4 sqmm COPPER cable LTUG cable with earth connection.

Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cable LTUG cable with earth connection.

Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable)

Supply and providing cable end termination of 3 1/2 Core x 70 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4C X 4 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 3C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED Street Light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 10A SP MCB , 2/4way connector on suitable hylem sheet and with supply and fixing of 150W Flood LED light Complete with suitable MS Brackets for 150W LED Flood light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Solar Street Light: Supply and fixing of 65mm dia GI pipe (Class 'B') of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonry pedestal with supply and fixing of 50 watts LED Light IP 66 degree of protection , Integrated mono crystalline solar panel , lithium phosphate battery and high efficiency high power LEDs with secondary optics offering precise distribution control . The luminary should be with PIR motion detectors to extend the battery life during non- peak hours of operation. The entire assembly should be in aluminum extruded body and should act as better heat sink for better operation of and life of the luminary. The GI pipe should be painted with suitable colour and commission in full as per the directions of the concerned authority of Cycle path area. The price is exclusive of GST.

Supply, Installation, Testing & Commissioning of 40W LED LANDSCAPE Gate Light Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection. Decorative post top with 3 mtr height pole for 360 degree Indirect light with IP 65 protection, Resistant to impact and corrosion. Glare-free and better uniformity. MAPLE LPTO-40-CDL/M make :Crompton Features and details Aesthetically designed and soft illumination effectumens : 2450 lm power : 40W colour : multi colour Included components : post Top Rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application. Crompton CAT REF : - LPTO-40-WW-M Equivalent.

Supply, Installation, Testing & Commissioning of 10W LED bollard light fittings Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminium heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection. The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be require with lumen package as per requirement. Crompton CAT REF : - LBLA3-10-CDL / Equivalent-(LANDSCAPE LIGHT). rate shall inclusive of necessary joint kit, glands, etc., for loop in/out connection suitable to outdoor application .

Supply and fixing of Floor mount Foot Lamp 3W LED Light fitting (IP67) (Step Lighting ) fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Spike light 6W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-Trioscope - 7052.

Supply, installation, testing and commissioning of 36W LED Surface Mounted (2x2) LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.

Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.

Supply and fixing of pressure die cast aluminium housing Bulk Head 10W LED fitting with IP65 protected with PVC unsheathed copper leads from terminals to the fitting. model equivalent to Crompton LBHE-10-CDL (Philips/Bajaj/Crompton/K.Lite )

Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the neary by point with 1.5 sqmm FRLS PVC insulated copper wires including ncessary accessories and harwares as required.

Supply and fixing of louvers shutters arrangements for 300mm(12") sweep (light duty) AC exhaust fan,including ncessary accessories and harwares as required.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4points / Coil)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 1 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)

Supply and fixing of 1 no.16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall.

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall.

Supplying, installation, testing and commissioning of 3 nos of 6A Switch & socket for Mobile charging with 10 Amps DP MCB in Manufactures box fixed flush with the wall including cost of material, necessary interconnection etc, with earthing etc., all complete and as directed by the departmental officers.,

Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.

Supply, Installation of 7.5 KVA UPS (Three Phase In & Single Phase out) with 2 Hour battery backup with necessary interconnection cables, breakers, MS stand etc as required. The UPS Shall have 384V DC Three Phase Input and Single Phase Output with associated numbers of sealed maintenance free Battery. The battery Stand shall be Open type Powder coated Metal Battery Stand with insulated sheet and Battery to MCB to UPS ' U6' Nywin Cables each 5 meters, "U6" interconnecting Links. The rate is inclusive of internal control cabling, Transportation, Insurance, Loading and unloading Charges.

Earthing System Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of die not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp and with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm die) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.

Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of No8 SWG copper Wire for earth Connection

Supply and Run of No8 SWG GI Wire for earth Connection

LIGHTING ROD Supply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level

MOUNTING STRUCTURE Supply of Standard / Special Mounting Structure of height 4.5mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter

DOWN CONDUCTOR Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection

TEST LINK Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

SURGE PROTECTION Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)

Fire safety

First Aid Box complete with all First Aid Medicines

Danger Board as required by the Electrical Authorities

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT /SAFETY FIRST / EQUIVALEN

CCTV SYSTEM

Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony )

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic

Supply, Installation, Testing and Commissioning of 32" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4X6 PVC box with 102mm x 77mm x 102mm with all fixing accessories

Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and laying of armoured, Singlemode, Thermoplastic Tape Inner Sheathed, PVC type sheathed 6 core Optical Fibre Cable with unique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube.

Fixing and Termination of Optical Fibre Cable Single Point ( Point to Point ) Splicing and arrangement charges.

Supply and fixing of OFC PVC Black Colour Box 1'x 3/4' x2 PVC Black colour Box "

Supply and fixing of 24 Port 2SFP with Module, PoE Giga Range Lan Switch.• 24 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem including Optical Fiber Cable connecting network accessories. (Make: DLINK, NETGEAR,TPLINK)

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.(Make: DLINK,NETGEAR/TPLINK)

Supply and fixing of Out Door Weather Proof Box 2Ft x 2Ft Out Door Weather Proof Box 2Ft x 2Ft

Supply and OFC patch of OFC Single mode Media Convertor with configaration charges etc.,

Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LNS unit and fan extra for the above rack.

Supply and fixing of 2 feet CCTV Camera Stand with attachment fittings as follows: * Weather heads and couplings * Cabinet mounting fittings, plates, brackets as needed. * Reinforced couplings for wire entrances to cabinets.

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

Supply and Installation for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 1 Hours back up

Erection of 6m Length pole with base plate of size 250x250x6mm as per IS-875 with following specification. Pole Outer die -76.10mm x 3.65mm Thick x 6 meter.

Supply and filling in foundation and basement with M sand / filling sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Providing and relaying Plain Cement Concrete 1:2:4 (One cement Two sand and ten broken Machine crushed stone jelly ) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de-watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

THOMAS IYADURAI INFRASTRUCTURE PVT LTD

SUN AND BLACK FLOWERS