SPL REPAIRS TO CERTAIN LIVING IN BILLET AT AF STN GWALIOR

Amount

Struking of existing PCC floor surface 5 to 10 mm deep picking,sweeping, clean and washing down with water to remove dust to receive cement mortar for tiling, complete all as specified and directed.

Dismentling of Stone Slab and tiles of any description or thickness in floors, aprons etc and laid bedded and pointed in any mortar complete all as specified and directed.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of PCC in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in levelling course/ beddeding for tile work etc ,. as in mass concrete complete all as directed

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection finished even and smooth with using extra cement complete all as specified and directed.

M&L glazed colour ceramic coloured tiles 450 x 350 x 7mm thick in vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including fixing with neat cement based over 10mm thick in CM 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles joint free floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc ncluding fixing with neat cement over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed

M&L for Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cm 1:4 and including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges including screed bed 20mm thick in cm 1:6 complete all as specified and directed.

M& L for Baroda Green Marble slab 15 to 18mm thick for window cill including 20mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for machine cut Kota stone slab 20 to 25mm thick Mirror polished in treads, landings of stair case over cement screed bed laid and jointed wilth grey cement slurry mixed with pigment to match the shade of the slab lincluding & grinding polishing over and including screedbed 20mm thick in cm 1:6 complete all as spd & directed.

M & L for machine cut Kota stone slab as in skirting, risers 20 to 25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in cm1:3 complete all as specified and directed.

Taking down cement plaster including on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc.complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished even and smooth (without using extra cement ) in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC @ 200 ml per bag of cement finished even and smooth without using extra cement in CM 1:4 complete all as specified and directed WPC will be paid separately .

M & L for rendering 10 mm thick in cm 1:3 mixed with WPC @ 200 ml per bag of cement on brick work / concrete surface of wall for sunken portion finished even and smooth without using extra cement complete all as specified and directed Note:- WPC will be measured and paid separately .

M & L for rendering 5 mm thick on concrete surface of ceiling finished even and smooth (without using extra cement)in CM 1:3 complete all as specified and directed.

Supply only Liquid water proofing compound

Taking down chowkat or frames with shutter (without taking off shutters from the frames) exc 1.5sqm but n.exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

S & F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Flush shutter 30mm thick, solid core construction, with block board core and plywood face panals both faces covered with approved pattern with decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hardwood lipping duly polished complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed skeleton shutters factory made open rebated and prepared to recieve glass, guazed etc ( with sash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 , Section 8 , clause 8.24 (a) and fitted to chowkhat complete all as specified.

M & L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F stainless steel hinges medium weight butt hinges of 100 mm size complete all as specified and directed.

S&F stainless steel hinges medium weight butt hinges of 75 mm size complete all as specified and directed.

S&F aluminium handle cast type, anodised 125 mm size complete all as specified and directed.

S&F aluminium handle cast type, anodised 75 mm size complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 100mm long complete all as specified and directed.

S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S & F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm .

S&F powder coated (of approved tint) aluminum frame & openable shutter for door, window, ventilators including joining cleat glazing clip, snap beading, rubber packing, building hardware & screw etc for fixing complete all as specified & directed. Note : (i) wire mesh and sheet glass shall be measured and paid separately under respective items. (ii) Weight of only aluminium section used for fabrication of door/window shall be measured for payment.

M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples.complete all as specified and directed.

S & F 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed.

S & F 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fixing of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.

S&F 18mm/19 thick prelaminated patrticle board,exterior grade,prelaminated both side with decorative choice lamination fixed with screwes,solvent cement/ adhesive to make kitchen cabinet and cupboard shutter complete all as specified and directed.

M&L for 18/19mm thick prelaminated partical board self for cubboard, kitchen cabinet interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work etc .complete all as specified and directed.

S& F 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F aluminium anodised hasp & staple for 75 mm including bolt to hinge plate and fixed with screws complete all as specified .

Dismanteling of existing roof treatment including tarfelt / cement plaster etc from roof surfaces including cleaning the surface and removing the debries from site complete all as specified and directed.

Demolition of PCC in roofs , floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work

M&L PCC type B-0,1:2:4 (using 12.5 mm graded stone aggregate) for providing cement concrete as levelling in roof with liquid WPC @ 200 ml per bag of cement etc. complete all as specified and directed.WPC will be paid separately .

Supply and application of 5 layer SHR waterproofing Coating System as per manufacturer application procedure on leaking concrete surface by thorough surface preparation with high pressure water jet min 125 bars, opening the cracks, followed by one absorption coat of Nano-tech enhanced elastomeric water proofing (NEEWP) emulsion havig UV resistance and min 50% solids, filling and sealing the cracks, then over coating with 2 coats of NEEWP + cement mixtures as water proofing coat having + 450% elongation. The surface is then to be tested for water tightness with ponding test for min 2 days and then top coated with 2 coats of SHR coating oure acrylic based, UV resistant, non yellowing, bio-organism resistant (anti fungal, anti bacterial) conforming to BIS STD IS-17218:2019 with pull off adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, mat, surface coverage 3.25 Sqm/Ltr/2 coats, DFT 100-120 microns using brush, roller, airless spray guns as applicable. The product should be tested at NABL approved Lab andf application is to be done by company approved applicator only". complete all as specified

M&L for half brick work using old size sub class 'B' brick, straight or curved on plan any radius radius, built in CM (1:4) complete all as specified and directed

S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain complete all as specified and directed.

S&F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.

S & F Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as secified and directed.

S&F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed .

S & F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

M&L for 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed.

S&F in repairs IWC squating Pan 'Orrisa Pattern' of size 580*440 mm white, with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S & F in repair Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S & F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F for 15mm bore Health faucet with CP felxible pipe of 90cm long incl necessary fittings complete all as specified and directed .

Dismantling tanks water tank exc 500 but n exc 1000 ltr.complete all as specified and directed.

Dismantling tanks water tank exc 250 but n exc 500 ltr.complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S&F CPVC Gate valve 25 mm internal dia complete all as specified and as directed

S&F brass union for UPVC pipe 25mm internal dia complete all as specified and as directed

S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.

S&F 25 mm internal bore nipple suitable for HDPE water tank. (Min wt 45 gms).

Refixing old 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

Refixing old 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S & F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches .complete all as specified and directed.

S& F PVC SWR 110 mm bends any radius comlete all as specified and directed.

S & F 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) .complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm PVC (SWR) vent cowl. Complete all as specified and directed.

S & F 110mm PVC (SWR) vent cowl. Complete all as specified and directed.

S & F 110 mm PVC (SWR) WC Connector bent type sanitary connection socket to fit wc out let complete all as specified and directed.

S & F 110 mm PVC (SWR) P Trap (110/110mm bore) complete all as specified and directed.

S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed.

S & F in repair stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed.

M & L for writing of letters for building numbers complete all as specified and directed.

Mild steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed

Demolition to reinforced cement concrete of roofs, floors ( other than ground floors )beams staircases,landing,chajjas and similar suspended work complete all as specified and directed.

M&L reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/Rcc railing repairs as in similar wk complete all as specified and directed.

M&L formwork to chullah hoods, chajjas, trough and similar itmes including edges complete all as specified and directed.

Material and Labour for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290 & grade E-165 etc complete all specified and directed

M & L for preparation of new steel Surfaces of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all specified and directed .

M & L for preparation of old steel Surfaces of any description, over 10cm in width or girth, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all specified and directed .

M & L for preparation of new wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new plaster surfaces of Walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed.

M&L for preparing new plaster surfaces of on ceilings and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surface and applying two coat of white wash complete all as specified and directed.

M & L for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M & L for post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

Preperation of new Surface of any description, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint priming with red oxide and two coats of synthetic enamel coat complete all specified and directed

S&F in repair vitrous china urinals full stall type (back or corner wall type complete inc providing and fixing plugs, bedding urina against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush type, grating, flush pipe and union for discharge pip etc complete all as specified and directed

S&F in repair vitrous china urinals partition white of size 310X700MM terminating about 40cm above floor line or platform pipe etc complete all as specified and directed

Supply only 32 mm dia flush pipe of CP brass tube for urinal etc complete all as specified and directed

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (min wt 60gms) etc complete all as specified and directed

M&L for cement concrete in foundations, filling and mass concreting for type B2 1:2:4 (40mm graded aggregate) complete all specified and directed

S&F MS Screw bolt (machine made) of 12mm dia with hexagonal or square head one end and screwed the other or screwed both ends , each screw end to be fitted with washer and one hexagonal or square nut , length of bolt exe 10cm but not exc 15 cm long etc complete all as specified & directed

S&F in repair of 4 mm dia of Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets dia and fixing to straining bolts, hooks, eyes etc complete all as specified & directed.

M&L PCC (1:5:10) type E-2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M &L for demolition of existing traps and removing the material and cleaning with the wire brush to dry and including applications of one coat of Sika latex SBR or Nito bond SBR (or equivalent from approved list of makes and as approved by GE) and cement in ratio 1:1 @400 gm/sqm. After drying apply two coats of SIKA top seal 107 or Brush bond @ 1.5 Kg/sqm (or equivalent from approved list of makes and as approved by GE) min 4 hrs gap is required between application of each coat and including 15mm thick rendering in CM 1:4, finished even and smooth without using extra cement as in sunken portion complete all as specified and directed.

M &L for hacking and racking out the wall joints with wire brush to dry and apply one coat of Sika latex SBR or Nito bond SBR (or equivalent from approved list of makes and as approved by GE) and cement in ratio 1:1 @400 gm/sqm. After drying apply two coats of SIKA top seal 107 or Brush bond @ 1.5 Kg/sqm (or equivalent from approved list of makes and as approved by GE) min 4 hrs gap is required between application of each coat and including 15mm thick rendering in CM 1:4, finished even and smooth without using extra cement as in sunken portion complete all as specified and directed.

M&L for 2mm thick (two Coat) cementitious wall care putty on new/old plaster for internal & external wall surfaces complete all as specified and directed.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading ,levelling, watering, and well ramming in layers not exc.25cm complete all as specified and directed.

Demolion and breaking up drain pipes ( salt glazed ware ,AC or reinforcement concrete ) set in cement mortar complete all as specified and directed.

M&L Reinforced concrete pipes, 150 mm dia class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing and under surrounding pipes with concrete after they are laid and tested for 150 mm dia pipe complete all as specified.

M&L for cutting into existing manholes for connecting new drains pipe 150MM dia making good to pipe and rendering cuting out existing benching for and forming branch channel (1/2 round 3/4 section ) in cement concrete 1:2:4 type b-1 smooth finished and reforming benching as required etc complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds stopped complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L Brick work with Sub class `B' Bricks straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as sfd and directed.

M & L for precast RCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in manholes/drain covers including use and waste of form/mould & set in cement mortar 1:4 etc complete all as specified and directed.Note- Reinforcement shall be measured and paid seprately.

M&L for 75mm thick cement concrete in Sub base for type D2 1:4:8 (40mm graded aggregate) complete all specified and directed

Supply and laying sand Cushioing including watering and consolidation under floor/around the cable for cable protection complete all as specified and directed

Machine pressed precast concrete interlocking paver block any shape and size with grey cement and with pigment confirming to IS 15658-2006 of 60mm thickness, M35 Grade complete all as specified and directed

Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Description same as per Srl item No 2 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board with using 1.5 Sqmm (nominal area) stranded copper conductor and 1.5 Sqmm (nominal area) FRLS stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note :- (a)For Socket outlet Ind 6 Amps ( One circuit with maximum 4 points). (b) For Socket outlet 16 Amps ( One circuit of one point only)

Description all as per item No148 above but point wiring for one 5 pin socket outlet, on same board with using 2.5 Sqmm (nominal area) FRLS stranded copper conductor and 2.5 Sqmm (nominal area) FRLS stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note :- (a)For Lights points one circuit shall have maximum 08 light points. (b) for 05 Amps sockets same board maximum 02 sockets in one circuit with light points.

Description all as per item no 148 above but point wring two way switch. Note :- (a)For Lights points one circuit shall have maximum 08 light points. (b) for 05 Amps sockets same board maximum 02 sockets in one circuit with light points.

Description same as per Srl item No 148 above but, point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 4 Sqmm (nominal area) FRLS stranded copper conductor and 2.5 Sqmm (nominal area) FRLS stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note :- (a)For Socket outlet Ind 6 Amps ( One circuit with maximum 4 points). (b) For Socket outlet 16 Amps ( One circuit of one point only)

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as approved

M & L for switch flush type single pole two way 5 Amps, 240 volts, white ivory finish complete all as specified.Make :-Anchor(Panta) , Cona , Leader

M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified and as approved

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and as approved

S&F switch socket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed.

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified.

Supply & Fixing adjustable bedside Wall light/ reading Light, Grey 2 watt LED Modern energy efficient made of premium material & decorative finish metal body including and complete fixing arrangement for fixing the light fitting to wall all as specified & directed by Engineer in-charge. Cat part No 919215850141 2W of philips , Cat part no DWL-CHR-LBED01R003XW of Jaquar, Cat part no BOCGLK37MX of Jazzy Pearls.

Supply and Fixing step type electronic fan regulator single phase suitable to operate BLDC Fan all as specified and directed.

Supply and fixing in repair surface mounted type LUMILINE PLUS NEO light fitting complete 1x 20 watt (4 ft), 6500K ,LM79,80 , onsite warranty 3 years, Average life 50000 hrs LED lightning fixture with extruded aluminium housing integrated electronic driver complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper pvc sheathed conductor cable suitable size. etc complete all as specified and directed. Make :- Havells cat part No LUMILINEPLUSNEOBS20WLED830SPCSSINDS or Wipro cat part No ‎Wipro Garnet 20w Aluminium Led Batten or JAQUAR BTI-WHT-LGLZ01X020XC.

Supply and fixing Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 lumen efficiency 120 Lm/W ,roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers all directed by Engineer-in-Charge. Make- Philips/Jaquar/Wipro

Dismaintling & Taking out MCB DBs VTPN any size , any type and capacity complete all as specified and as directed

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed. Make- Legrand/Schinider/L&T/GE

Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one TPN-MCCB 100 /125 Amps as incomer and 12 SP MCBs (or any combination of SP/TP MCBs )outgoings incl taking out VTPN MCB DB complete all as specified & directed.Make;-L&T /Legrand / Schneider/Siemens.

Dismaintling & Taking out MCB's/Isolator & metal clade box any size , any type and capacity complete all as specified and as directed

S&F MCB single pole 6 to 32 Amps, 'B' series10 KA ,240 Volts complete all as specified. Make;-L&T /Legrand / Schneider/Siemen

S&F MCB Single pole and neutral 40 to 63 Amps, 'B' Series 240 Volts complete all as specified. Make;-L&T /Legrand / Schneider/Siemen

Supplying & fixing MCCB, 3 pole, 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 fixed in distribution board, conforming complete all as specified & directed. Make;-L&T /Legrand / Schneider/Siemens.

Disconnecting & taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed.(NOTE: Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.)

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers including taking down of AC box all as required and directed by Engineer-in-Charge.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with heavy duty, blades, and frame andr, voltage 230V, 50 Hz, RPM 1200, Copper winding complete.

Supply & Fixing BLDC ceilling fans copper motor complete with blades,without downrod and accessories ,230 V ,1200mm Sweep Min air delivery 210 CEM with service value 6.00 BEE .Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed including taking down old unsv fans and deposited to E/M store yard.

Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed

M&L bricks for cover old size bricks underground cable with one layer of bricks using sub class 'B' bricks (Old size) laid flat across the cable complete all as specified.

Supply, Laying,jointing & testing 70 sqmm 3.5 core cable 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured heavy duty laid in trenches /ducs ,floor foxed to wall etc complete all as specified and directed .

Supply, Laying, jointing & testing 35 sqmm 3.5 core cable 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured heavy duty laid in trenches /ducs ,floor foxed to wall etc complete all as specified and directed .

Supply, Laying,jointing & testing 16 sqmm 4 core cable 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured heavy duty laid in trenches /ducs ,floor foxed to wall etc complete all as specified and directed.

Supplying & Fixing Tube medium grade galvanised of dia 50 sqmm for road crossing of cable and on pole and DB cable as in cable protection complete all as specified and directed.

Supply, Installation ,commissioning of water cooler fully stainless steel,electric driven single phase having approx storage and nominal cooling capacity of 40/80 Ltrs complete including PCC work complete for plinth and drain pipe embeded in PCC etc complete all as directed.

S&F GI tubes of 25mm bore, 'medium grade', galvanised with all fittings laid in trenches, complete all as specified and directed.

Taking down unseveciable water heater of 50 Ltr capacity carefully from existing place and deposited to MES store yard for disposal action all as specified and directed by Engineer-in-Charge.

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 20mm bore complete including all fitting & fixtures all as specified and directed.

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 15mm bore complete including all fitting & fixtures complete all as specified and directed..

S&F GI Medium Grade Hot water Pipe duly insulated with and including glass wool and aluminium cladding 25mm bore complete including all fitting & fixtures complete all as specified and directed..

S&F Stop valves/Gate valves 20 mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.

M/S Rajeev Construction (BID ID -3471299)

M/s Himgiri construction (BID ID -3466761)

lodhi builders (BID ID -3471915)

PRAGMATIC INFRASTRUCTURE LIMITED (BID ID -3466769)

Ravi Associates (BID ID -3466249)

POONAM ELECTRIC INDUSTRY (BID ID -3467054)