Renovation Up-gradation of 07 Nos CHDH 12 Nos Jawan Barrack 02 Nos Toilet Block at BOPs of 30 BN BSF under SHQ BSF Jowai SH Rewiring and replacement of Electrical installation service connection and Fans

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Group-B)

Wiring for circuit/ submain wiring alongwith earth wire with the size 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and drawing 3 X 1.5 sqmm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

SITC of 10/12 Watt Surface mounted round/square type LED downlighter panel fitting with primium deffuser to inclose glare free homogenious illumination and alongwith electronic driver and accesories etc i/c connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cable, earthing etc. as reqd.(Make: Havells /Crompton/Syska/Phillips)

SITC of 20 watts 4' pre wired tube rod LED batten with polycarbonate energy efficient luminuries directly on ceiling/wall mounted alongwith electronic driver and accesories etc i/c connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cable, earthing etc. as reqd.(Make: Crompton / Havells / Syska / Phillips)

S/F of decorative wall light fixture made up of poly caobonate/suitable for 10/15 watt retrofit LED lamp (B-22 Base) alogwith 10/15watt LED lamp i/c connection etc as required. ( make: Havells city-2 or equivalent to /Crompton/Syska/Phillips ) .

SITC of 1200 mm sweep ceiling fan, ISI marked, including wiring the down rod of standard length( up to 30 cm) with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as req. (Make: Usha/Havells/Orient/Crompton)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Make: Legrand /Havells/Anchor)

SITC of exaust fan 250 mm sweep in-built with decorative plastic/poly carbonate body with louver shutter complete set in the existing opening i/c making good the damage complete connection etc. as reqd. (Approved Make: Usha / Havells / Orient / Crompton)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single poles in the existing MCB DB complete with connections, testing and commissioning etc as required. (Make:Havells/ Legrand/ ABB /Schenider)

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc as required. (Make:Havells/ Legrand/ ABB /Schenider)

Supplying and fixing 6 Way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 Way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size upto 35 Sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size upto 35 Sqmm in the existing RCC/ HUME/ METAL pipe as required.

Supplying and embedding 40 dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size Upto 35 sq. mm (clamped with 1 mm thick saddle) on wall surface as required

Supplying of PVC sheathed / XLPE Armoured Aluminium conductor power cable of 1.1 KV grade of 2 X 25 Sqmm size. (make: Polycab/Havells/finolex)

Dismentling of existing wiring / fittings and fixture like ceiling fan Point, Tube rod Point, Bulb Point, Wall bracket point & MCBDB etc installed at Jawan barrack or CH/DH building etc complete with making good the damage as required.

R D ENTERPRISE

DAS ELECTRICALS ENGINEERING WORKS