82509 ADDITION/ALTERATION TO ACCOUNTS OFFICE BUILDING UNDER AGE (I) NAVY CHENNAI

Amount

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down and refixing the same opening of window/door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Demolition of Brickwork built in cement mortar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Ditto as in item No. 5 but for half brick thick walls built in CM (1:4)

Supply and fix for Aluminium powder coated frame for sliding three track windows of frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and ventilator 100x38x2mm thick louvers frame including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Supply and fix for aluminium Powder coated ventilator, fixed type shutter frame top ,bottom and sides of rectangular tub of size 75x25x1.03mm (section No 14019) and fixing of glass of glazing strap of size 44.45x3.07x0.57mm (section No19368), glazing clips of size 19x17.30x1.2mm (section No 19377) aluminium wire staples 12.20x19.8x1.2 (section No 19365) heavy duty louvers type, with blades of 100mm heavy duty with including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete shall as specified. and fixing of wire mesh to be provided out side of the ventilator as specified etc all as specified and as directed by Engineer-in-Charge. Note : Wire mesh and glass pane will be measured and paid separately and Thickness of powder coating not less than 50 micron.

Supply and fix for aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

Supply and fix for 4 mm thick sheet glass figured glass, pin head ,obscured or frosted, on one side type and aluminium glazing beads in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 12 mm thick Prelaminated Bakelite sheet solid , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed.

Supply and fix for plain sheet glass, 4.8 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face With Wood Board Core free EPS as per specification and drawing complete all as specified and directed

Supply and fix for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed

Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 20 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) in steps, jambs, pillars, windows, cills, cooking platforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink and including 15mm thick screed bed in CM 1:4 complete all as specified and directed

Ditto all as per item no-19 above but 15mm thick Granite stone slab on skirting and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed

Material and Labour for 18-20 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, window cills and jambs etc of green Marble over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

Supply and fix rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e tank nipple, of 25mm dia Ball brass valves, high pressure, with polythene float and fly nut etc hoisted and fixed in position complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate 0.5 liters/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center and sealing the same complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of voids in masonry wall and floor joins or perimeter of rooms using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. Note:- Measurement to be consider only perimeter of wall and depth up 500 mm

Material and Labour for Providing and injecting chemical emulsion for Post structural Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note:- Measurement to be consider only perimeter of wall and depth up 500 mm

Material and Labour for Removal of plant growth by injection with chemical glyphospate solution ( 4 % concentration ) of 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm deep. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) diluted with 1 ltr of water. All roots / plants shall be removed completely and making good with cement concrete/mortar and finished the surfaces matching to existing surfaces of wall / floor with acrylic paint all as directed by EIC. etc sectional area not exc 0.10 Sqm each complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate) complete all as specified and directed

Material and Labour for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips and including welded with new reinforcement to existing reinforcement and grouting of beams/ columns/lintels etc complete all as specified and directed

Material and Labour for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm graded stone aggregate) as in as slab suspended slab, chajjas, facia, shelves for cooking platform , platform and the like complete all as specified and directed

Material and Labour for formworks to sides and soffits of shelves, cooking platform and the like rough finished surface of concrete complete all as specified and directed

Material and Labour for Steel work in tabular/hallow/ I Beam, C Channel Graders etc sections of trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Material and Labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finished even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty complete all as specified and directed.

Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over 3mm thick wall care putty and including necessary scaffoldings as reqd etc complete all as specified and directed .

Material and Labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc complete all as specified and directed

Material and Labour for Preparation new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and Labour for Preparation Old decorated surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

Material and Labour for Preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Polyurethane paint over a coat of primer complete all as specified and as directed.

Material and Labour for Preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

Material and Labour for non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

S&F Vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) of double charged, area of each tile exc. 0.36 Square metre in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

- Ditto - as above item No.51 but as in skirting/ dado including backing coat of 10 mm thick in CM 1:4 etc complete all as specified and directed.

Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed.

Ditto as in item No. 53 but for 20 mm dia

Ditto as in item No. 53 but for 25 mm dia

Supply and fix 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Ditto as in item No. 56 but for 25 mm outside dia

Ditto as in item No. 56 but for 32 mm outside dia

Cutting chases, pinning in. making good to facings for inserting galvalume sheet into the e brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exc 10 cm girth complete all as specified and directed.

Supply and fix 20mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Ditto as in item No. 60 but for 25 mm outside dia

Ditto as in item No. 60 but for 32 mm outside dia

Supply and fix in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fix in repairs vitreous china water closet Orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe).

Supply and fix in repair of low level flushing cistern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engineering grade ABS nylon and nylon glan complete incl brackets and flush pipe of reqd size and 15mm bore 450mm long PVC connection all as directed.

Supply and fix for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

Supply and fix for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed..

Supply and fix in repairs CP Angle/ stop valve15mm dia of chromium plated fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs 15mm bore dia chromium plated fancy type Bib taps, with knob/ capstan head of fancy type with long shank, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs Wash basins, vitreous china (flat back or angle back type) of 550x400mm, including 32mm waste coupling , cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe complete all as specified and directed.

Supply and fix pillar taps, chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and directed.

Supply and fix for PVC waste pipe of 32 mm dia for sink and WHB complete all as specified and directed

Supply and fix for 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc

Supply and fix in repair PVC (SWR) floor trap, 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix in repair PVC pipe 110mm dia single socketed in any length with rubber joints fixed to walls with Special Stack clamps with 6mm dia stays , including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fix in repair PVC pipe 75mm dia single socketed in any length with rubber joints fixed to walls with Special Stack clamps with 6mm dia stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fix for PVC (SWR) bends any radius bore of dia 110mm with access door complete all as specified and directed.

Supply and fix for PVC (SWR) bends/ Shoes any radius bore of dia 110mm complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia with access door complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia complete all as specified and directed.

Supply and fix for 110 mm PVC (SWR) branch piece, Single Tor Y) equal or unequal of with access door complete all as specified and directed.

Supply and fix for 75 mm PVC (SWR) branch piece, Single Tor Y) equal or unequal of with access door complete all as specified and directed.

Supply and fix for 110 mm PVC (SWR) vent cowl complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided and including removing of PCC Tiles and Existing roof treatment etc complete all as specified and as directed.

Material and Labour for PCC Padding (1:2:4) type B-0 (12.50 mm graded aggregate) thickness as specified to bring uniform slope in floors/ roof slab with addition of integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement and polypropylene fibres @ 900 grams per cum of concrete. The concrete shall be laid in panels of not more than 200sqm and groove cutting of 6mm x 15mm to be taken at every 5m x 5m and filled with Polyurethane elastomeric sealant Nitoseal PU 40 and coving at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with Nitobond SBR at dosage of 1.5 Ltrs per 50kg cement as per manufacturer's including over apply with brushing neat cement slurry with 3.0kg/Sqm after cleaning of existing roof top surface with water etc complete all as specified and directed. Notes :- Integral waterproofing compound Conplast WL Xtra , polypropylene fibres , Polyurethane elastomeric sealant Nitoseal PU 40 & Nitobond SBR will be measured paid separately. The above description involves usage of FOSROC products. The same shall be replaced with products of equivalent manufactures as given in PS and the method of application shall be as per the technical data sheet of the manufacturer, duly approved by AGE(I)

Material and Labour for 10mm thick rendering on roof top surfaces in CM 1:3 with using with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement. Finishing the even and smooth surface etc complete all as specified and directed. Note :- Integral waterproofing compound Conplast WL will be measured and paid separately.The above description involves usage of FOSROC products. The same shall be replaced with products of equivalent manufactures as given in PS and the method of application shall be as per the technical data sheet of the manufacture, duly approved by AGE(I).

Supply only Integral waterproofing compound Conplast WL/ equivalent will be measured paid separately.

Supply only Polypropylene fibres

Supply only Polyurethane elastomeric sealant Nitoseal PU 40/ equivalent

Supply only admixed with Nitobond SBR/ equivalent

Material and Labour for Providing & applying 100% solids content, 2 component, solvent free, spray applied elastomeric seamless Pure Polyurea Membrane Fosroc Polyurea WPE/ equivalent at a thickness of 1.5mm in two layers at a coverage rate of 1.5 litres / sqm. Spray applied waterproofing shall utilize high-pressure, heated plural component spray proportioning equipment and applied in a cross directional method to the total roof slab and parapet wall height. Complete work carried out through Fosroc Manufacturer/ equivalent The cured membrane shall have the following properties (i) Solids by Volume : 100%, (ii) Volatile organic compounds : 0 g/litre (iii) Viscosity : A ISO = 1000mPas and B AMINE 1200 mpas (iv) Tensile strength ASTM D412 : >19 MPa (v) Tear Resistance ASTM D624C : 90N + 4 N/mm (vi) Elongation ASTM D412 : >300% (vii) Shore D ASTM D2240 : 46 (viii) Abrasion (1kg,H22 wheels) ASTM D4060: 36 mg /1000 cycles, Abrasion (1kg,CS17 wheels) DIN EN ISO 5470 : 10 mg /1000 cycles (ix)Service temperature ASTM D4060: -30°C to +100°C

Before applying of Polyurea WPE under mentioned preparations has to be done. (x) The Surface shall be free from sharp projections & undulation, ridges or troughs, etc. The substrates shall be freed of laitance, loose or friable materials, debris and all contaminants by mechanical means preferably using light grinding.

(xi) Supply and application of solvent free epoxy resin primer Nitoprime 31 @ min 0.25 kg/Sqm on horizontal surfaces and on verticals to the total height of the parapet wall. Sprinkle dry sand over the primer coat for better adhesion of Polyurea coating

Material and Labour for Providing and applying two coats of Dekguard PU/ Nitoproof UR/ equivalent Top coat @ minimum 100 microns dry film thickness in two coats over the Polyurea waterproofing using rubber squeegee and back rolled with lambs wool roller. Note: The complete item shall be carried out through Fosroc Manufacturer/ equivalent

Supply and fix in repair aluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples/ teak wooden beading complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover filets Complete all as specified and as directed.

Supply and fixing Hangers 6 mm dia G.I(upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I) flats 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

Supply and fixing Anodised aluminum snap grid frame work as required grid (size of grid 605x605 mm) ceiling all as specified.

Material and labour for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Dismantling carefully of false ceiling with frame work and refixing same position of existing portion false ceiling with frame work and suspenders etc ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover filets complete all as specified and as directed. Note:- Incase of any damaged frame work, new item will be measured and paid under respective item No-97 and 98

Supply and fixing Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg fixed in repairs complete all as specified and directed

Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly excluding modular metal box and white cover plate with frames, switches, sockets, regulators etc.. suitable for modular type fittings/ fixtures complete all as specified and as directed for the following:-

One light point controlled by a two way switch

One light point controlled by a one way switch

One bell/buzzer point controlled by one push button on same board

One fan point controlled by one regulator/ switch

One 3 pin socket outlet 5 amps socket on independent board

One 3 pin socket outlet 5 amps socket on same board

All as per item No. 104 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor.

Material and labourfor ceiling rose, surface Bakelite, 65x50mm, two to three terminals, complete all as specified and as directed by the Engineer-in-Charge

Supply and fix for Modular bell push,1 Module complete all as specified and as directed

Supply and fix for Bell multi music type complete all as specified and as directed

Supply and fix for Modular Switch, 1 Way, 6A, 1 Module complete all as specified and as directed

Supply and fix for Modular Switch, 2 Way, 6A, 1 Module complete all as specified and as directed

Supply and fix Modular switch 1 way 16A, 1 Module complete all as specified and as directed

Supply and fix Modular Socket, 6A, 2/3 pin combined, 2 Module complete all as specified and as directed

Supply and fix Modular Socket, 6A / 16A, 2/3 pin combined, 2 Module complete all as specified and as directed

Supply and fix for Modular Fan step regulator, 120 W, 2 Module complete all as specified and as directed

Supply and fix for Modular white cover plate with frame,2 Module complete all as specified and as directed

Supply and fix for Modular White cover plate with frame, 3 Module complete all as specified and as directed

Supply and fix for Modular white cover plate with frame,6 Module complete all as specified and as directed

Supply and fix for Modular White cover plate with frame, 8 Module complete all as specified and as directed

Supply and fix for Modular Metal flush box, 1/2 module complete all as specified and as directed

Supply and fix for Modular Metal flush box, 3 module complete all as specified and as directed

Supply and fix for Modular Metal flux box,6 Module complete all as specified and as directed

Supply and fix for Modular Metal flush box, 8 Module complete all as specified and as directed

Taking down old unserviceable sub main wiring of any size complete all as specified and as directed

Material and labour for Sub main wiring with four runs single core 10 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 10 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 32 mm including conduit accessories all as specified and directed. Note: Five runs of 10 Sqmm cable and one run of 32 mm conduit / casing capping will be measured as one unit length.

Material and labour for Sub main wiring with two runs single core 10 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 10 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 32 mm including conduit accessories all as specified and directed. Note: Three runs of 10 Sqmm cable and one run of 32 mm conduit / casing capping will be measured as one unit length.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia/PVC casing capping 20 mm including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 20 mm conduit / casing capping will be measured as one unit length.

Material and labourfor single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V, 20 amp complete and dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed by the Engineer-in-Charge

Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed.

Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 8 way DB with Degree of Protection IP 42 , Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed.

Supply and fix MCCBs 63/100 Amps, 415V,16KA, 4 Pole complete all as specified and as directed.

Supply and fix MCB TPN 40 Amps , C curve including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix MCB TPN 50 A / 63 A , C curve including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix MCB SP 5 to 32 A , B curve including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix MCB SPN 40 A , B curve including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix recessed mounting 2 ft x 2 ft LED luminaries 35W or nearest higher wattage 6500 K suitable for amstrong/grid ceiling with super bright LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make : Crompton, Model :POLARIS I Cat Part No.LCTLRN-36-FO-CDL or equivalent as mentioned in PS

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed . Make: Bajaj, Model :Cat Part No BCLSB 20 WH or equivalent as mentioned in PS

SHRI BALAJI CONSTRUCTIONS

VIJAYALAKSHMI ENTERPRISES