Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC SUMATEE BHAWAN GUWAHATI AIRPORT NEAR BORJHAR TELEPHONE EXCHANGE GUWAHATI 781015 ASSAM | KAMRUP METRO | ASSAM | 781015 | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹44.9 L+₹89,627.10 (2.04%)Rejected-Finance R G BARUAH ROAD NEAR SHIV MANDIR GUWAHATI AIRPORT GUWAHATI 781015 | KAMRUP METRO | ASSAM | 781015 | L2 | Rejected-Finance Other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
31 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati, Assam, Pin- 781015 Tele 0361 - 2840127
Repair to joineries and certain other connected misc works at 19 Wing, AF under GE (AF) Borjhar
2024_MES_676892_1
8431/BOR/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Borjhar
MES Contractor enlisted as Class D category a(i) having deposited Standing Security of Rs 50000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Borjhar
₹80,000
Yes
28 Mar 2025
27 Sept 2024
2 Nov 2024
27 Sept 2024
31 Oct 2024
12 Oct 2024
Amount
Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified and directed.
All as per Serial Item No 1.00 here-in-above but exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and directed.
Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.
All as per Serial Item No 3.00 here-in-above but exceeding 1.5 Square Metre and not exceeding 4 Square Metre each complete all as specified and directed.
Taking down aluminium window frame with shutters (Without taking off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down aluminium door frame with shutters (Without taking off shutters from frame) exc 1.5 Sqm not exceeding 4.00 sqm each complete all as specified and directed.
Demolition of brick work or stone / boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for PCC (1:2:4), type B1 using 20 mm graded crushed stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge
M&L for Mild Steel framed work for door chowkhats made out of angle iron Fe-290 (Gde E-165) including welding of hold fast and supply and fixing tie rod 10 mm dia round bars (01 Nos) welded at bottom and making holes for sliding/ tower bolt into angle iron/ brick work and make good disturbed surface in cement mortar (1:3) and provide adequate piece of conduit pipe 3 mm thick of suitable size welded with angle iron frame for holding sliding/ bolt frame for holding sliding/ tower bolt complete all as specified and directed.
S&F Framed work of mild steel as in grills, grating with guard bars etc ends of bars shouldered or riveted or forged into spike conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed
S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge
M&L for running welding in repairs, thickness of metal to be welded not exc 6mm complete all as specified and as directed
Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge
S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed.
S&F aluminium anodised powder coated frame of standard section as directed or as perTD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed.
S&F aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified & directed. Note : all the aluminium shutter will be as per TD drg no:- AF/TD/242/15 shet no 1/3,2/3,3/3 of CE(AF) shillong Zone.
S&F aluminium anodised powder coated window and ventilator shutters, sliding type with size of sliding shutter style 39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm, joining cleats, glazing clips, rubber packing/rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) , complete, all as specified & directed. Note: all the aluminium sliding window shutter will be as per TD drg no:- AF/TD/242/15 (R) shet no 1/6,2/6,3/6,4/6,5/6,6/6 of CE(AF) shillong Zone.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F for 12mm thick Particle board for insulation purposes , fixed with screws to aluminium framework complete all as specified and directed.
S&F plain framed, panelled shutters, 35 mm thick of second class hard wood (Hollock) (any numbers of panels) with panels of 12 mm thick veneered particle board exterior grade medium density with commercial veneering on both faces with sheesham wood beading all round the panel made out of 20 by 15 mm, on one side and fitted to chowkhats complete all as specified and directed.
S&F Glazed and skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), chemically treated complete all as specified and directed.
All as per Serial item No 26.00 here-in-before but 30 mm thick as in window and ventilator etc are provided with stiles and rails, sash bar all as specified in SSR Part I, section 8, clause 8.24 (b), chemically treated, complete all as specified and directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.
S&F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and taking down old door shutter with frame complete, all as specified & directed.
S&F in repairs Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick consisting of solid core single leaf particle board of 25 mm thickness, lipped with 15mm (5mm x 3) thick width on one stiles and top rails and 10mm (5mm x2 ) thick x 25 mm width on the other stiles & bottom rails, with 2,4 or 6 raised panel design with 2mm thick termite proof, water proof and fire resistant 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face using rubber based adhessive on flush door and solvent cement on the PVC lippings etc. supplying & fixing in frame at site as per specification & drawing and taking down old door shutter with frame complete all as specified and as directed. Make :- rajshri or equivalent.
S&F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed (i.e. panel will be of stainless steel wire gauze in lieu of wood grain printed PVC sheet panel). The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note: Wire mesh in panels shall be measured separately.
Servicing and greasing of rolling shutter of any type and thickness including replacement nut, screws etc. including taking down carefully of rolling shutter and cover greasing of all parts for smooth functioning of shutter and refixing the same in existing opening/position, complete all as specified and directed.
S & F steel ventilator with top hung shutter including hinges, steel peg stay complete with glazing bars as per standard section as directed or as perTD of CE(AF) shillong Zone complete all as specified and directed.
S&F 5.5 mm thick tinted coloured glass, with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and as directed
S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 25 micron reflective type (greater sun control or equivalent) complete all as specified and directed.
S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F 3mm thick obscured or frosted sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Servicing and greasing of aluminium door including replacement nut, screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/ components by new parts / components for smooth functioning of door and refixing the same in existing opening/ position complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed.
S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified and directed.
S&F 200 mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed.
All as per Ser Item No 42.00 but 150 mm long complete all as specified and directed.
S&F Mild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed.
All as per Serial Item No 44.00 herein above but of 100 mm size complete all as specified and as directed.
S&F Mild steel sliding door bolt , plate type, stove enameled black, with bright bolt not less than 12 mm dia with & including 06 bolts and nuts, 04 on bolt side and 02 on staple side, length of bolt 250 mm complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.
S&F in repairs Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.
S&F in repairs Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.
S&F in repairs Mild steel 200 mm ordinary rat tail rod pattern springs including roller and roller plate complete fixed to wooden or steel frame all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm, anodized, with hard drawn steel spring, fixed to shutters of any description, complete all as specified and as directed.
S&F in repairs 0.71 mm thick plain aluminium sheeting alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) fitted in wall cladding, steel gates etc. cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts as directed.
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed.
S&F in repairs aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and directed.
S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed.
S&F in repair Gate and shutter, hooks and eyes 75mm of Aluminium plate type II complete all as specified and directed.
S&F in repairs Door bottom seal brush with metal frame with nylon brush/ rubber with height upto 30-40mm fixed with screws to any type of doors (wooden/alumium/PVC) including necessary fittings complete all as specified and directed.
Taking down cement plaster on brick/block surfaes of walls or concrete surface etc all as specified and directed.
M&L 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick(in two layers i.e. 10 mm + 5 mm thick ) in cement mortar 1:4 to other than fair faces of brick or concrete surfaces with WPC (as per manufacturer instruction) finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
Supply only WPC and apply as per manufacturer instruction complete all as specified and directed by Engr-in-charge.
M&L for preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth over a coat of red oxide primer, complete all as specified and directed .
M&L for one coat white wash on walls including preparation of old wall surfaces complete all as specified and directed .
M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer as per manufactured instructions complete all as specified and directed by Engr-in-charge.
M&L for preparation of new wall surface & applying two coats of cement base paint over a coat of primer, complete all as specified and directed .
M&L for preparation of old painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel and steel based surfaces of any description not other wise described over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls (scrapping, washing and rubbing old surface, fill the gaps and cracks with putty as required and make the surface smooth) and applying one coat of Oil bound distemper complete all as specified and directed by Engr-in-charge.
M&L for one coat white wash on ceilling including preparation of old wall surfaces complete all as specified and directed .
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and directed.
S&F in repair 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete all as specified and directed .
M&L for 2nd class hardwood clean sawn as in scantling fixed to timber frame etc complete, all as specified and directed .
M&L in repairs 2nd class hardwood clean sawn as in scantling fixed to timber frame etc complete, to replace old and decayed timber (including piecing, scarfing etc of old and new timber if required) all as specified and directed .
M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosete complete all as specified and directed .
S&F in repairs mild steel decorative and colour coated curtain rail, 20mm bore complete all as specified & directed.
S&F in repairs for Steel rolling shutters with thickness of lath 1.0 mm, gear operated type with bevelled gear box and and crank handle, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete including taking down old one
S&F in repairs for safety lever locks mild steel with 4 levers for rolling shutters
S&F in repairs for ball bearing for rolling shutters
Supply & fixing and providing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement.
S&F 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes including glass is ground or obscured or frosted, on one side required complete all as specified.
Cutting holes in brick walls/ post in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall is not exc half brick complete all as specified and directed.
Grinding, polishing and rounding off edges of glass, any type exc 4 but not exc thick 8mm thick and securing glass in metal frame complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, any description including cover fillets
S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement/ adhesive and fixing at site on PVC/ wooden frame as per specifications and drawing given in SSR. Note : PVC Fillets shall be measured and paid for separately.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR and as directed.
S&F in repairs 150mm Aluminium handle (american pattern), cast type, anodised complete all as specfied and directed
M/s Vishnu Enterprises (BID ID -3154087)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .