WBHD/EE/ED-II/e-NIQ-92/2025-26

Amount

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary. Without Loop Box

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km. ( At D type)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

Painting Block Letters or Digits within a circle/ square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below Size 40 mm and upto 50 mm

(A) S.T. Pole & Arm Bracket Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions -- 410-SP-24; 8.5 mtrs: 158 Kg (Make – Jindal/TATA/PWD Approve Make) --- GI

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x 600x 150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly ----- Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

S/F fabricating, welding, fixing G.I. junction and 2.1 M long single arm projected bracket made of 50mm dia G.I. (ISI medium) with 2 nos. thro’ bolts & nuts of 175 mm (7") long 15.6 mm (5/8") dia including M.S. pole cap at the top of junction with sets screw etc. complete as per direction of Dep’t

S/F fabricating, welding, G.I. junction and 2.1 M long double arm projected bracket made of 2" dia G.I. pipe (ISI medium) with 2 nos. thro’ bolts & nuts of 175 mm(7") long 15.6 mm (5/8") dia junction with set screw etc. complete as per per direction of Engineer-In-Charge.

(B) Lumeniers Portion Supply of 45W Street Light Lumen Efficacy >120lm/w , CRI>70, CCT -5700K, IP - 66, Aluminum Dia Cast Housing , Potted driver. Inbuild Surge Protection 4kv Internal & 10 kv external LM 79 Report shall be provided from manufactures own NABL Lab and LM 80 from Nichia/ Osram/ Lumiled/ Seoul/ Bridge Lux – 5 Years Warranty Make - Philips/ Bajaj / Wipro / Mazik/Surya)

Supply of 100 W Street Light Lumen Efficacy >120lm/w , CRI>70, CCT -5700K, IP - 66, Aluminum Dia Cast Housing , Potted driver. Inbuild Surge Protection 4kv Internal & 10 kv external LM 79 Report shall be provided from manufactures own NABL Lab and LM 80 from Nichia/ Osram /Lumiled/ Seoul/ Bridge Lux – 5 Years Warranty Make - Philips/ Bajaj / Wipro / Mazik/Surya)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

( C ) Mini Pole Portion (from roof or top building) Supplying 80 mm dia G.I. pipe (JINDAL/equivalent) 1.5 m long (approx) --- Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly, Upto 9.0 mtr. Size 0.6x0.6x1.70 mts ----- Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint, Upto 9.0 mtr. long pole - 1st coat of aluminium paint over 1 coat of RO priming, 2nd coat of aluminium paint over 1st coat ---Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below , Size 40 mm and upto 50 mm

Supply of 1500 mm Single Arm Bracket made of 40 NB /48.3 OD Mild Steel Pipe as per IS:1161 suitable to insert at Pole Top A/F 70

(D) E.I Portion S & F of Three Phase timer circuit including following items in a 2+12 way SPN DB including all connection of suitable size flexible Copper wire ( Finolex/RR Kabel/Gloster) as per direction of EIC. a. 100A, 4P terminal - 2no b. 40A MCB, Make- L&T - 1 no as incomer (TP-MCB) c. 32A, 3 pole contactor, MNX50, Make- L&T- 1 no. MNX Series d. Analog timer - 1 no. , make L&T e. Auto Manual Switch f. Toggle Switch- 1 no. g. Red & Green led indicator

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. Make-Legrand, 4p, 63A (Make - ABB/Seimens)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 4 Way

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand - KEI/Polycab/Finolex) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required -- for interconnection 3 x 22/0.3 (1.5 sqmm)

3 x 84/0.3 (6 sqmm)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 25mm size

S/F PVC loop box of size 103 mm x 103 mm x 73 mm (Make - Hensel/Sintex) suitable for housing the water-tight switch and providing the wire lead in lead out arrangement for 6A SP MCB and lamp holder connection. One side of the cover lid of the box is to be hinged type and the other side with proper clamping and locking arrangement the box. The set is to be fixed in suitable position on iron leg on wall as per direction of Engineer-In-Charge.

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6A, SP, Make- Legrand/ABB/Havells

Supply & fixing 100A, 4 pole terminal, Make- ISI

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sqmm

( E ) Cable & laying of cable Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC) 3½ / 4 core 10-16 sqmm cable

Supply & Delivery 1.1 kv gr. 3 core X 10 sq.mm. XLPE Al. armoured cable as per direction of EIC. ( Make- KEI/Polycab/Gloster)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish ---- From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 40mm dia

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 3 core 10 sqmm cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 10 sqmm cable

(F) Earthing Excavation of soil for installation of Earth Electrode and filling & ramming. ---- For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 10 SWG

(G) LED Glow Sign Board Supply & fixing of LED signage in box type Aluminium frame fabricated from 40 mm x 25 mm x 2mm thick aluminium square hollow bar with cross and radial supports in the middle of the structural frame properly fixed with the structure incl. All necessary fixing materials and fabrication works and board shall rest on the wall with suitable sizes MS angle ( 50 mm x 50 mm x 6 mm ) bracket / frame arrangement to be fixed by anchor fasterners / inserting in wall including S/F following accessories as per direction of the EIC. [ Size of the signage : 10 ft. x 3 ft. = 30 sq.ft.] Incl. S & F of ACP Board made 4 mm thick sheets (Make Alstrong / Aludecor / Timex Bond) Incl. S&F of superior quality acrylic three dimensinal flushed on the pre-fabricated existion ACP board. The computerised processed letter in bold English fonts and letter size of the matter shall be as below (to be approved before taking up) : Incl. S&F of 12V DC LED modules having three LED in a single base module including necessary electrical connections [minimum 12 modules per letter] Specificationof the LEDs is given as below : a) LED - White ; GE /Samsung (Cat No. Tetra mini max , Code No. GEWHMMTS8) b) Type - Straight , 3 nos. LED per module. C) Life - 70,000 burning hours. d) Visibility - 100 mtrs. at least, for normal eye. e) power supply - 20Amp. (GE) f) Power consumption - 1.5 watt. Per module g) Input - 230V , AC, output 12V DC (Double LED layer) Incl. S&F of heavy duty 12V DC, 400 VA SMPS (Make - Reputed & approved By EIC ) as per VA load.

Add G.S.T @ 18% on aggregate amount of BOQ item No 1 to 34.

Add L.W.Cess @ 1% on aggregate amount of BOQ item No 1 to 34 (after add G.S.T 18 %).

M/s Joy Durga Electric Repairing Shop (BID ID -6914466)

B M ELECTRIC (BID ID -6913211)