Repair to wiring in OTM accommodation under GE (N) Bikaner at Mil Stn Bikaner

Amount

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including surface PVC conduit Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.Make of cables :Havell's/Paragon/Nicco/L&T.Make of PVC Conduit : Polycab/Supreme/Modi/Finolex/Prince/Precision

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including PVC caping casing Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in and including sunken box covered with and including 3 mm thick bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.Make of cables :Havell's/Paragon/Nicco/L&T.Make of PVC casing capping : Polycab/Supreme/Modi/ Finolex/ Prince/Precision

All as per item No 2 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 2 here-in-before but cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board including provision of 2.5 Sqmm PVC insulatred unshethed multistranded copper conductor as earth wire

All as per item No 2 here-in-before but for one light point control by two way switch complete all as specified and as directed by Engineer-in-Charge.

All as per item No 2 here-in-before but in existing conduit

All as per item No 2 here-in-before but in existing conduit cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board

S&F in replacement LED T5 Batten lightening fixture, energy efficent 18/20 Watt ( 4 feet) complete all as specified and directed by engineer-in-charge Cat Part No. SSK-RA1801 of make Syska / Havells/Phillips

S&F in replacement Decorative ultra slim linear LED T5 Batten lightening fixture, Eco friendly energy efficent 10/12Watt (2 Feet) complete all as specified and directed by engineer-in-charge Cat Part No. SSK-T5-12W of make Syska / Havells/Phillips

Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge. Cat Part no. SSk-BH-9W in make Syska / havell's / Phillips.

S&F Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement switch piano flush type, Single pole 5 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of switch piano flush type, Single pole 15 Amps, one way, complete all as specified and as directed by Engineer-in-Charge Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed by Engineer-in-Charge. Make - Havells. Cona, SSK, wipro, Legrand

S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Electroonic choke 1x36/40Watt complete all as specified Cat No.EBN 14-B Make Cromptoon Greaves OR EQUIVELENT IN/Philips/Wipro

S&F Recessed mounting LED Backlit Panel (2x2) type, SSK-TVP-6060-36W in make SYSKA, PMD0405005-make polycab or equivalent to phillips and CG

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 2 SSR Part-I.

Supply and Fixing MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make :- Legrand cat Part No 408590 to 408595, cat No A9NIP(6 to 32Amps C curve) in make Schnedier or equivalent in make GE, English Elect, L&T Exora series

Supply and Fixing MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand cat Part No 408590 to 408595, cat No A9NIP(6 to 32Amps C curve) in make Schnedier or equivalent in make GE, English Elect, L&T Exora series

Supply and Fixing only MCB 63 Amps, 440 Volt AC supply Triple pole with neutral(TPN) C curve with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand cat Part No 408590 to 408595, cat No A9NIP(6 to 32Amps C curve) in make Schnedier, GE, English Elect, L&T Exora series

S&F blank cover for MCB DBs

S&F Bell Ding dong AC single pole 230volts Make : Havells,Cona,SSK,wipro, Legrand

S&F Bell push button Piano flush type single pole 5Amps make : Havells,Cona,SSK,wipro, Legrand

Taking down old sub main wiring any type or sizes

Sub main wiring in PVC casing capping/conduit with 2 single core 10 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 10 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC Cassing and Capping all as specified and as directed by Engineer-in-Charge.(Note two run of 10 sqmm and one run of 10 sqmm will be measured as 1 RM.Make of cables: Nicco, L&T, Paragon, havells

All as per item No 29 above but of size 6 sqmm and earth wire of 6 sqmm

All as per item No 29 above but in existing conduit with cable of size 10 sqmm and earth wire of 10 sqmm

All as per item No 29 above but in existing conduit with cable of size 6 sqmm and earth wire of 6 sqmm

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make -L&T ( Exora series)/Schneider/Cat Part No 607711in legrand/A9HSND08 in Schnedier or equivalent in Make GE /English Elect Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

Ditto item -33 but for 4 way SPN Cat Part No 607710 in Legrand/A9HSND06in Schnedier/8GB0204RC or equivalent in Make L&T (Exora series )/GE / English Elect

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,TPN 4 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand Cat No 607715/A9HTDN04E in Schneider or 8GB32202RC08 or equivalent in Make L&T Exora series/GE/English Elect Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

S&F in replacment LED PLL Lamp (Retro Fit) two pin 8/9/10W Make Syska - SSK-PLL-8W-N or equivalent in make phillips/Polycab/havells/CG

S&F in replacment LED PLL Lamp (Retro Fit) two pin 18W Make Syska - SSK-PLL-18W-N or equivalent in make phillips/Polycab/havells/CG

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge Cat Part No 607841 in Make Legrand or equivalent in schneider/Seimens/L&T

Supply and fixing in repair stranded copper conductor PVC insulated and unsheathed cable of size 2.5 sqmm Single core ISI marked

Supply and fixing in repair stranded copper conductor PVC insulated and unsheathed cable of size 4. sqmm single core ISI marked

Supply and fixing in repair cord flexible twisted copper conductor multi stranded ISI marked

S&F in replacement Decorative wall light fixture made up of Polycarbonate, suitable for retrofit 9 W LED lamp Complete all as specified and directed by Engr-in-charge. Make : Surya / Havell's/ Phillips

Dismantling and taking out faulty wiring including casing and capings/conduits etc and refixing the same after rectification of fault in original position including replacment of copper/aluminum cable any size not more than 10 mtr casing/capping/conduit not more than 5 mtr and testing after completion

Supply and fixing in replacement 2x18 Watt Decorative recessed mirror optic luminaire with serrated/low glare aluminium cross louvres including 2 Nos CFL .Cat Part No TLD218EB in Make CG or equivalent in WIPRO and PHILIPS

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 230 volts with 200 Amps rated bus bar, load line DB's are fittied with bus bar nutural links blank plates TPN vertical load line 4 ways suitable for TP/FP 'A' frame MCCB,includeing 100 Amps MCCB -01Nos ,MCB SPN 32 -04 Nos and MCB SP 04 Nos, complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivelent Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/ABB/BCH/HPL Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

S&F in replacement bad side fitting with suitable LED bulb complete all as specified and directed by Engr-in-charge. Sample approved by Engr-in-charge and GE .

S&F Lamp holder insulated body with back plate for conduit/casing capping fittings with LED Bulb 9 W , ingress protection - IP44 complete all as specified and as directed by Engineer-in-Charge Cat Part No. SSK - LMS - 9W of make Syska/Havells/Phillips.

S & F in replacement LED Bulb 0.5W (in different colors) complete all as specified and as directed by engr-in-charge.

S&F Lamp holder insulated body with back plate for conduit/casing capping fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe, stranded conductor 1100 volts grade heavy duty cable, two single core, with PVC insulated aluminium conductor served with an inner sheahing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq mm nominal cross section in service connections.

Supply and laying or fixing or passing through pipe, stranded conductor 1100 volts grade heavy duty cable, two single core, with PVC insulated aluminium conductor served with an inner sheahing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq mm nominal cross section in service connections.

Suppy and Fixing LED based street light, housing made up of LM6 pressure die cast aluminium alloy with effectie thermal management sturdiness. The fixture should have a minimum system efficiency of more than 100 lumen/watt and a minimum system lumen output of not less than 4500 lumens and system wattage to 45 Watts. The fixture shall have a colour temperature of minimum 5700K and CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66, resistance raiting of IK>=08. The fixture should comply with the parameters as per IEC 60598 and IS 10322, and LED drive should apply to IEC 61000-3-2 ed 3.2 per harmoics IEC 61347-2-3,2006 in confirmation with IEC 61347-1 ed. 2.0,2007 for electrical safety, LM 79 and for LED LM 80 test report needs to be submitted from a NABL accredited in house lab to verify above parameters. The fixture driver should potted type for humming free operation, driver should e withstand up to 440v for 8hrs, have an operating voltage range of 140-270V, frequency 50-60 Hz, two surge proection not less than 5KV one on driver and one external surge protection, PF>0.95 and THD<10%. THe driver should gave double phase protection LED light fitting should be suitable or abmient temperature from (-) 10 C to (+) 50 C including making modificaion to existin street light bracket for fixing LED light if required, with suitable size clamp, nut bolts and washers as per site requirement complete all as specified as directed by Engr-in-Charges. (Note:- The manufacturer of LED based street light shall give guarantee for 5 years from the date of intallation ).Make:- Havells cat LHEWEBP7PN6H045/, Crompton Greaves Cat No. LST-45-CDL and Wipro Cat No. LR02-501-XXX-57-XX.

BIDAWAT ENTERPRISES

ALPHA ENGINEERING COMPANY

Vijay raghuvir Engineering Company

M/s Rohit Construction Co.

M/S BIKANER CHEMICAL LABORATORIES