REPAIR TO SECURITY WALL, RETAINING WALL, SECURITY FENCE AND HARDSTANDING ETC AT 49 RR GALUTHI UNDER AGE(I) CIF(R)

Amount

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles all as specified. NOTE:- All Concertina coil,Barbed wire and Iron angles also to be dismanteled in security wall .

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), complete all as specified and directed by Engineer-in-charge.

All as per description of item 2 above but except bricks complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15mm thick other than fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M&L for preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engr-in-charge.

S & F broken glass coping @ 10 Kg glass per sqm on top of wall rendered im CM 1:3 all as spcified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S & F concertina concertina coil with punched tape 600mm dia having 50 rounds per 6 meter length, with wire diametre 2.5mm dia and blade size 15mmx12mmx0.5mm, sapacing of blade 26mm, (concertina coil minimum weight per bundle of 6 m length covering 50 rounds shall not be less than 8.5 Kgs) concertina coil shall be fixed over wall complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M & L for cement concrete work in pavement/hard-standing of flexural strength 40 Kg/per Square cenimetre in field using 360 Kg of cement per cubic metre, thickness of concrete 25 cm or less including necessary form work. Complete all as specified and directed by Engineer-in-Charge.

M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base all as spd and directed.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in fixing of hold fast, coping, band, bed plates, lintels upto 1.5m clear and similar items including weathering slightly rounded or chamferred angles and throughting including necessary form work, complete all as specified and directed.

M&L for 20-25 mm thick Cement concrete chequred tile size 30 cm x 30 cm, Machine pressed, set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6 complete all as specified and directed .

Sand filling under floors or in foundations including watering and consolidation

M&L for Machine pressed precast concrete interlocking paver block 80 mm thick (Factory made rubber moulded) with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80 mm thick M-40 grade, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block 60 mm thick (Factory made rubber moulded) with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 Grade fixed all as specified and directed .

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 19,000.00 during AOC Note:- Tenderers shall not quote for this Schedule

MEELU ENTERPRISES (BID ID -3299369)

M/S BADRI NATH GUPTA (BID ID -3298907)