MANNING OPERATION AND CERTAIN REPAIR OF PUMP MOTOR OF WATER SUPPLY INSTALLATION AND CERTAIN OTHER WORKS AT INS ANGRE, NOORBHOY BLDG, GODFREY CLINIC, INS TRATA WORLI, INS KUNJALI, RAFIYA MANZIL AND PCDA (N), INS VAJRABAHU, B CHWAL UNDER GE (NW) KUNJAL

Amount

Manning and operation of water supply installation consisting of electrically operated monoblock pump sets of capacity : (a) 20HP-02 Nos 75HP-02 Nos (fire fighting) at INS Vajrabhau , (b) 5 HP-02 Nos at FMU bldg and (c) 5 HP-02 Nos at Fleet office bldg ( for fresh water) including taking care of from any pilferage/damage daily in three shifts round the clock from 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs including Sundays/ holidays at A-14 INS Vajrabhau bldg, FMU bldg and fleet office bldg complete all as specified and directed by the Engr-in- charge FGM - 01 No- Skilled per shift ( 01 person x 3 shifts x 11 months = 33)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets of capacity as mentioned below including taking care of from any pilferage/damage daily in three shifts from 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs, including Sundays/ holidays at INS Angre pump house complete all as specified and directed by the Engr-in- charge (a) 10HP - 03 Nos (for fresh water) (b) 30HP - 02 Nos (for fresh water) (c) 75HP -02 Nos (for fire fighting) FGM - 01 No- Skilled per shift ( 01 person x 3 shifts x 11 months = 33)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets of capacity as mentioned below including taking care of from any pilferage/damage daily in two shifts from 0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs including Sundays/ holidays at INS Trata and Worli pump house complete all as specified and directed by the Engr-in- charge. (a) 7.5 HP - 02 Nos (fresh water) (b) 5 HP - 02 Nos (for fresh Water) FGM - 01 No- Skilled per shift ( 01 person x 2 shifts x 11 months = 22)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets of capacity as mentioned below including taking care of from any pilferage/damage daily in one shifts from 1800 hrs to 0200 hrs including Sundays/ holidays at HQ MAGNA and Godfrey clinic pump house complete all as specified and directed by the Engr-in- charge. (a) 7.5 HP - 02 Nos (fresh water) (b) 5 HP - 02 Nos (for fresh Water) FGM - 01 No- Skilled per shift ( 01 person x 1 shift x 11 months = 11)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets including taking care of from any pilferage/damage daily in one shifts from 0900 hrs to 1700 hrs including Sundays/ holidays at New Flotila Niwas & NMRL pump house complete all as specified and directed by the Engr-in- charge. (a) 7.5 HP - 02 Nos (fresh water) (b) 5 HP - 02 Nos (for fresh Water) FGM - 01 No- Skilled per shift ( 01 person x 1 shift x 11 months = 11)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets including taking care of from any pilferage/damage daily in two shifts from 0600 hrs to 1400 hrs and from 1400 hrs to 2200 hrs including Sundays/ holidays at B CHAWL/INS KUNJALI pump house complete all as specified and directed by the Engr-in- charge. (a) 10 HP - 02 Nos (fresh water) FGM - 01 No- Skilled per shift ( 01 person x 2 shifts x 11 months = 22)

Manning and Operation of water supply installation consisting of electrically operated monoblock pump sets including taking care of from any pilferage/damage daily in one shifts from 0900 hrs to 1700 hrs including Sundays/ holidays at INS AGNIBAHU pump house complete all as specified and directed by the Engr-in- charge. (b) 50 HP- 01 No (for fire pump) (c ) 10 HP- 02 Nos (fire jockey pump) (d) 50 HP- 01 No (Diesel operated pump) FGM - 01 No- Skilled per shift ( 01 person x 1 shift x 11 months = 11)

Manning and operation electrical receiving substation 11KV/ 440 Volts at HQ CE Office by employing below mentioned man power in three shifts per day including Sundays / Holidays complete all as specified and directed by the Engr-in- charge: (i) Mate Electrician-01No. Per shift. Note: Shift Timing is as under:- (a) First shift: 0600hrs. To 1400hrs. (b) Second shift : 14.00hrs. To 2200 hrs. (c) Third Shift : 2200 Hrs to 0600 Hrs Mate electrician- 01 No- Semi-Skilled per shift ( 01 person x 3 shifts x 11 months = 33)

Manning and operation electrical receiving substation 11KV/ 440 Volts at INS TRATA /WORLI power house by employing below mentioned man power in two shift per day including Sundays / Holidays complete all as specified and directed by the Engr-in- charge:- (i) Skilled Electrician-01No. Per shift. Note: Shift Timing is as under:- (a) First shift: 0600hrs. To 1400hrs. (b) Second shift : 14.00hrs. To 2200 hrs. Electrician- 01 No- Skilled per shift ( 01 person x 2 shifts x 11 months = 22)

NOTES FOR ITEM NO 1.00 TO 9.00:- (i) The skilled operator (electrician and FGM) shall be having qualification not less than ITI or equivalent certified course from state/ central govt recognized institute. The semi skilled mate electrician shall be having qualification not less than 12 pass. (documents in regards to meeting critiria shall be ascertained by Engr-in-charge and GE before payment of RAR). (ii) Contractor shall submit ID proof, residential proof, bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as operator. (iii) The respective operator of each installation shall be available as per the shift timings specified in the tender and he will report to JE E/M in-Charge In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge or JE E/M he will be treated as absent for the said shift and recovery of Rs 1500/- per shift shall be affected. (iv) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (v) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. In case payments are made in current coin or currency notes, contractor shall submit certificate alongwith undertaking of employee that asking for payment other than by cheque or by crediting in the bank account of the employee. The contractor shall submit prof to Engineer-in-Charge before claiming any payment. (vi) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable.

(vii) The rate quoted by the contractor shall be inclusive of life insurance for the tradesmen employed by him in case of untoward incident such as injuries fracture or casualty while on duty (viii) Contractor shall submit the labour licenece VAT as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (ix) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (x) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xi) The cost of employment of supervisior and any assitance required to operate and maintain the installations by operating staff shall deemed to be included in above quoted rates. (xii) Each shift shall be of continuous 8 hours durations. As per industrial act one person should not be continued on duty for more than 06 days and he should be given weekly off day for his personal maintenance and one reliver should be employed for off duty by contractor without any extra cost to the Govt.The quoted rate shall deemed to be inclusive for provision of reliever on duty and leave periods on all days including Sundays/Gazetted Holidays. (xiii) The cost for maintenance of documents installations charts and daily records as mentioned in clauses of relevant particulars specifications shall deemed to be included in the rates quoted for above items.

(xiv) The operator on duty shall wear proper uniform of light blue colour shirt and dark blue trouser duly printed name as MES and contractor with all protective arrangement during the duties like shoes, gloves etc and required tools for operation and maintenance of installation.The quoted rate shall deemed to be inclusive of minor services like greasing of bearings, replacment of glands/ rubber coupling, belts etc (xv) The installation shall be handed over in operating state on the commencement of contract though work order. (xvi) Antecedents of the Personnel engaged by the contractor to carry out the work shall be verified from police authorities and accordingly security passes shall be issued. (xvii) The contractor shall be solely responsible for all personnel deployed for carrying out the above jobs and all transport required for conveyance. The quoted rate shall deemed to be inclusive of EPF & GST etc all as per latest norms of labour Commissioner. (xviii) The labourers shall be provided with protective devices and shall wear them while working. In case any accident/ injury/ fatal or partial disability happened, the contractor shall be solely responsible for settling all claims/ compensation. Department will have a right to recover any sum indicated/ claimed by Labour Commissioner/ Court directive. (xix) Contractor has to render a certificate/ confirmation every month that minimum wages act is not violated and every employee engaged have been paid their wages through aadhar linked bank account only and laborers in full and receipts there on obtained.

(xx) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority.If the quoted amount is less than the estimated cost given in SCH A Note on Page No 14 the lowest bidder will have to depost FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (cover No 2). (xxi) The deposited amount shall be the difference between estimated cost given at SCH A Note on Page No 14 and amount quoted by lowest bidder for respective item. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to with hold the said amount which will beverified by GE. The decision of Accepting Officer regarding amont to be withheld shall be final and binding. The withheld amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall submit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment release as the case may be. (xxii) The rates quoted shall be inclusive of suitable reliver wherever Sundays & holidays are mentioned for working.

Supply and fixing in repair 100 mm dia GI Tubing medium grade in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 80 mm dia GI Tubing medium grade in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 40 mm dia GI Tubing medium grade in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 25 mm dia GI Tubing medium grade in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 15 mm dia GI Tubing medium grade in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 40 mm dia UPVC pipe in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 25 mm dia UPVC pipe in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Supply and fixing in repair 15 mm dia UPVC pipe in trenches/wall/ceiling with all fittings and fixtures in high rise building with scaffolding upto 8th floor all as specified and directed

Disconnecting water tank setting aside (or lowering if required ) for repair, cleaning etc and hoisting if required reconnecting and refixing in position for 1000 ltrs tanks to 2000 ltrs tanks

Supply and fixing 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt -I complete all as specified and directed by the Engr-in- charge.

Supply and fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt -I complete all as specified and directed by the Engr-in- charge.

Supply and fixing 2000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt -I complete all as specified and directed by the Engr-in- charge.

Supply and fixing 5000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt -I complete all as specified and directed by the Engr-in- charge.

Supply and fix in repair 15 mm bore self closing taps cast copper alloy chromium plated screwed for iron pipe of 15 mm dia complete all as specified and directed by the Engr-in- charge.

Supply and fixing in repair Gun-metal, globe or gate valves, ISI marked, 50 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repair Gun-metal, globe or gate valves, ISI marked, 40 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repair Gun-metal, globe or gate valves, ISI marked, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repair Gun-metal, globe or gate valves, ISI marked, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repair Gun-metal, globe or gate valves, ISI marked, 15 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repair Sluice Valve, ISI marked, Class PN 1.6 with making facility to fix with 100 mm dia GI pipe with flanges on both side of pipe with rubber packing and nuts and bolts all as specified

Supply and fixing in repair Sluice Valve, ISI marked, Class PN 1.6 with making facility to fix with 80 mm dia GI pipe with flanges on both side of pipe with rubber packing and nuts and bolts all as specified

Supply and fixing in repair Non return Sluice Valve, ISI marked, Class PN 1.6 with making facility to fix with 80 mm dia GI pipe with flanges on both side of pipe with rubber packing and nuts and bolts all as specified

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut of 15 mm dia complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut of 20 mm dia complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut of 25 mm dia complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut of 40 mm dia complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Supply and fixing in repair Ball brass valves, high pressure, with polythene float and flynut of 50 mm dia complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed

Supply and fixing in repair in repair stainer for suction Class PN 1.6 with making facility to fix with 100 mm dia GI pipe with flanges on both side of pipe with rubber packing and nuts and bolts all as specified

Supply and fixing in repair in repair stainer for suction Class PN 1.6 with making facility to fix with 150 mm dia GI pipe with flanges on both side of pipe with rubber packing and nuts and bolts all as specified

Supply only Granules of calcium hypochlorite high strength chlorination chemical for disinfectant, in granule form for water treatment in factory sealed non returnable HDPE containers (45 Kg each ) having chlorine concentration level of 70 % complete all as specified and as directed

Supply and fixing in repair Direct-on-Line Starters 7.5 HP, 3-Ph motor complete all as specified and as directed

Supply and fixing in repair Direct-on-Line Starters 10 HP, 3-Ph motor complete all as specified and as directed

Supply and fixing in repair Semi Automatic Star-Delta Starters 15 HP, 3-Ph motor complete all as specified and as directed

Supply and fixing in repair Fully Automatic Star-Delta Starters 35 HP, 3-Ph motor complete all as specified and as directed

Supply and fix in repair Fully Automatic Star-Delta Starters 50 HP, 3-Ph motor complete all as specified and as directed

Material and labour for rewinding the electric motor of capacity 60 HP to 75 HP capacity, disconnecting the electric connection of motors, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motors from its existing position to workshop Note : following work are to be deemed in rate quoted :- (a) Removing the split case/body cover of motor, separate stator/rotor and cutting the complete burnt/defective copper winding. (b) Cleaning the stator body complete by rubbing sand paper to remove all carbons. (c) Inserting insulating materials such as insulating paper sleeves. (d) Rewinding the stator with existing size of super enameled copper winding, varnishing and heating up at desired temp. For achieving the particular Ohm resistance. (e) Cleaning the rotor and assembling motor. (f) Connection/coupling the motor with pump, connecting all electric/earth connection foundation nuts/bolts at its original position and testing on load complete all as specified and directed.

All as per item No. 45.00 above but 40 hp to 55 hp

All as per item No. 45.00 above but 30/35 hp

All as per item No. 45.00 above but 20 hp

All as per item No. 45.00 above but 15 hp

All as per item No. 45.00 above but 10 hp

All as per item No. 45.00 above but 7.5 hp

All as per item No. 45.00 above but 5 hp

Chakshu Enterprise (BID ID -3092712)

shubham construction (BID ID -3091846)

SHREE JAGDISH FURNITURE CO. (BID ID -3076625)