Development of Children park and open Gym at Municipal Council Kathua

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material incl. all leads and lifts .For thickness of tiles 10 mm to 25 mm

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, including dressing of sides & ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge .

Providing and laying dry stone agg. using 40mm nominal size incl. spreading, levelling,sand grouting, watering, ramming, etc all complete including all leads, lifts & carriage of material by MT / H.L.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT / H.L.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work incl. material , labour all leads , lifts and carriage of material by MT/HL.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

12mm Cement plaster of mix: ( 1 cement : 4 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.

Supplying and fixing of Leg Press shall consist of 80 NB G.I. pipes with two suitably designed brackets attached on it. Brackets have to be made of M.S. material with G.I. plating. The moving frame of Leg Press is to be made of 40NB G.I. pipes which is to be mounted to the main frame with the help of suitably designed, machined shaft and bearing housing. Bearings used are to be of oil sealed, self-lubricating. Make of bearing shall be as per approved make list. Foot rest is to be hinged to the main frame with the help of suitably designed G.I. plated clamp and 25 NB G.I. pipes. Gusset plates have to be provided to give extra strength to foot rest. Foot rest is too made of high quality HDPE material. Suitably designed HDPE pads has to be provided at the bottom of moving frame. Seat and back rest provided has to be made of HDPE. All pipes are to be uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe is to be close by GI / HDPE caps for user safety against entrapment. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing Section FRP channel strip of thickness upto 5mm and 1200mm long with wooden finish bolted to both the side frames. The Bench strip consists of nylon end caps provided at the two ends of strips for covering the ends. 2. Designer VIP Bench frame made from sand casting method. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the seaters. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes.

Supplying and fixing 3-level chin-up application/Usage Only For Outdoor Use Automation Grade Manual,Dimension 3500 X 200 X 2500 mm ,Material GI, Mild Steel,Customisation Customised Condition New,Model No. RE005,Brand REPLAY Usage Open Air Gym , Indoor Gym MAX USER WEIGHT 110 KG.FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of outdoor peck deck Product Details:Brand Replay Dimension 2480 X 1150 X 2305 mm Automation Grade Manual Model Number RE033 Condition New Material GI, Mild Steel Max User Weight 110 KG.FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing outoor abs shaper Material Mild Steel, GI Customisation Customised Condition New Dimension 2150 X 450 X 800 mm Is It Portable Non Portable usage/Application Outdoor use only Model Number RE027 Max User Weight 110 KG FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of outdoor peck deck product Details:Brand replay dimension 2480 X 1150 X 2305 mm automation grade manual Model Number RE033 condition new Material GI, Mild Steel Max user weight 110 KG.FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supply and fixing of Back Extention Re-038-gym Dimension:- 1350 X 650 X 700 Mm. Max User Weight 110 Kg.FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of Elliptical cross trainer RE-019-GYM dimension:- 1300 X 500 X 1820 mm.,Max user weight 110 KG.FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of Shoulder press double RE-042-GYM DIMENSION:- 2470 X 750 X 2250 mm.Max user weight 110 KG. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of Parallel bar RE-009-GYM DIMENSION :- 2500 X 800 X 1500 mm.Max user weight 110 KG. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplyinng and fixing of 6 seater merry go round Diameter DIA 6 FT Safe Play Area DIA 12 FT Shape Round Size Of Equipment DIA 6 FT Warranty 1 Year Condition New Is It Customized Customized Brand Replay Color Yellow Material MS. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of Standing See-Saw TPS-05-SS Dimension - 1.5 x 0.5 x 1.2 m. (5 x 1.6 x 5 ft.) FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of See Saw should be conforming to EN 1176-6:2008 for safety requirements for free height of fall. 2. Ergonomically designed Rotational Molded seat should be 300milimeterx 190 milimeterx 70 milimeter. 3. See Saw Lever should be made from 80NB Galvanized Pipe conforming standards IS 1239 with strong load carrying capacity. 4. See Saw stand should be with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip. 5. The roto products should be manufactured using material LLDPE (Linear Low Density Polyethylene) of Grade -36RA045 (Food Grade Plastic) with density 963 kg/m3 . The material is added with antioxidant & 12% UV for protecting the product from color fading. The material is tested with weatherability test, carbon test, M.F.I. (Melt Flow Index) test, fatigue test. The mold is fixed to three arm bi-axial rotational molding machine & kept in the oven for about 20 minutes up to temperature of 180-210 Degrees. The overall product obtain is a seam- -less to ensure perfect blend of uniform thickness & durability. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying & fixing miltiplay station Area:8m x 9m Safe Area: 9m x 11m 1. Sq. Deck 5’ ht:1.The platform should be made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4-5mm.The top canopy is made of FRP with a min. thickness of 2-3 mm. Roto flag is attached on top.2 Square Deck 3’ ht with Canopy:The platform should be made up of FRP with anti-skid surface with thickness of 4- 5 mm.The top canopy is made of FRP with a min. thickness of 2-3 mm. Roto flag is attached on top. 3. Bowl Slide 3’ht: The bowl slide chute should be made up of FGRP (FRP) molded one & is of attractive color & shade.The design of FRP bowl slide has min. permissible joints suitable for children such that child does not fall down while sliding down.The FRP slide is 3-4 mm thick. There is a suitable handgrip on the side of the Slide. the landing support is made up of 25 NB GI pipes.The slide entry is also made of LLDPE in Rotational molding process.4. FRP Bridge 8’Long:The FRP Bridge should be made from FRP of 4-5mm thickness. It has railing made from Rotational molding process with support of 20 NB GI pipes. 5.FRP Tunnel 6’Long:It should be a pipe shaped module of specific dia made from FRPof 3-4 mm thickness.6.Swinging Bridge 8’Long :This bridge is made of rotational molded planks and is suspended with galvanized chains.The frame is of 80NB pipes with railing made from LLDPE & is supported by 20NB GI pipes.7.Spiral Slide 5’ ht: this chute is made of FRP having shell thickness of 4-5 mm. The slide is supported on 80 NB GI pipe.The landing module is supported by 20 NB pipe.The railing is made up of LLDPE in Rotational molding process. It is support by 20 NB GI pipe.8. FRP Ladder It is made up of FRP with a thickness of 3-4mm.The top surface of the ladder should be such that it should not deserve any kind of skiddy movement. 9. Rock Climber 5’ ht: It is made up of Fiber Reinforced Plastic (FRP). they are molded on same platform.The climber is supported by 25 NB pipe at the bottom for ground support. 10.Wave Slide 5’ ht:This chute is made up of 4-5mm thick of FRP.The wave shape is given in such a manner that it will not give any jerk or bump to the rider. Rotational molded slide entry is provided at top of the slide. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The supports provided are made up of 25 NB GI pipe.

Repair of Spiral slide chute is made of Fibre Reinforced Plastic having shall thickness of 4-5 mm . The slide is supported on 80 mm NB G.I. pipe FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Providing and fixing inauguration stone (granite of size 3/x 2/-0//) including engraving , painting, writing and const. of pedestal of 5 feet height by way of brick work , plastering , tiling and painting incl. all leads , lifts and carriage of material by M .T./H.L.

DANVEER SINGH ANDOTRA

Ganesh Dutt Sharma

M/S SANDEEP SINGH JAMWAL