WBHSD/EE/MED/eNIQ-04/2025-26/1

Supply Fitting & Fixing of Godrej Make Esca Single Bed, Overall Size : Width : 208cm Depth : 92.5cm Bed Height : 38.5cm Bed with Headboard Height : 84cm. Color : Black . bed -metal frame materials & dimensions:(gauge +/- 0.1mm)m.s. pipe 25.4x 50.8 x 1.2 thk.;m.s. pipe 19.05x 19.05 x 0.8 thk.;m.s.angle 20x20x1.6 thk;m.s. pipe dia. 50.8 x 0.9 thk.;m.s. pipe dia. 15.875 x 0.8 thk. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Godrej Make Mattress (78x36cm) 4". The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services.

Supply , Fitting & Fixing of Godrej Make Adriana Bed Side Table . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mm Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.. Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.

Supply , Fitting & Fixing of Godrej Make Enzo Table Size : (1500Wx 750Dx 750H), 3Desk with one drawer (RHS) & HDU attachment on one side & 3 drawer unit on the other side (LHS of user) Size 1500 x 750 x 750mm. Prelaminated Particle Board with 18mm thick table top and 15mm thick understructure covered with PVC Lipping. Tables are available in Beech colour only. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Godrej Make Enzo Table Size : (1200Wx 750Dx 750H), 3Desk with one drawer (RHS) & HDU attachment on one side & 3 drawer unit on the other side (LHS of user) Size 1500 x 750 x 750mm. Prelaminated Particle Board with 18mm thick table top and 15mm thick understructure covered with PVC Lipping. Tables are available in Beech colour only. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Supply & placement of Godrej Make Bravo Mid Back Chair of where seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.5 to max 54.5cm, Height - min85.5 to max 97.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Godrej Make Visitor Chair CH7B. The seat and back should be made from seasoned wood and plywood. The same should be upholstered with black synthetic leather and polyurethane foam. BACK SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D) The armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns). The understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns). The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Supply , Fitting & Fixing of Godrej Make Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The manufacturer should be a member of BIFMA & IGBC (Indian Green Building Council) & should have AIOTA, GRIHA, Green Pro, Indian Design Mark, IAQ and Green Guard Certification (from UL) for a few of its products. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and ISO 50001:2018 are mandatory. All the ISO certificates should be obtained from NABCB (National Accreditation Board for Certification Bodies) accredited organization otherwise certificates will not be accepted.The bidder has to submit a bid specific authorization certificate from the OEM.

Please Enable Macros to View BoQ information