REPAIR TO CHAJJA, FACIA, PLASTER, JOINERY, CUPBOARDS, WALL PANELLING, FLOOR TILLING AND OTHER ALLIED WORKS OF OTM AND MD ACCN IN ZONE-V AREA UNDER AGE B/R-IV OF GE(S) MEERUT CANTT

Amount

Taking down cement plaster of any description from brick or stone wall, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. and removing debries and rubbish etc complete all as specified and directed.

Material and labour dubbing out average 15mm thick on irregular faces of chajjas, balconies, walls etc by using cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone agg and rendering 15 mm thick in CM 1:4 over dubbing surfaces complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and fair on external walls, complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished the surface even and fair on internal walls, complete all as specified and directed.

Material and labour rendering 10mm thick in CM 1:3 on fair faces of concrete surfaces, of ceiling finished the surface even and smooth complete all as specified.

Supply only liquid water proofing compound, complete all as specified and directed..

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames exceeding 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Refixing door shutters of any description exc 1 sqm but not exceeding 2 Sqm each in the same opening including taking down complete all as specified and directed.

Material and labour for factory made pressed steel frame, conforming to relevant IS, having profile 105mm x 60mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, incl necessary fixing lugs, butt hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fix factory made pressed steel frames conforming to relevant IS, having profile 125x60 mm for doors with one or more rebates made out 1.25mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed.

Supply and fix 35mm thick fly proof gauged shutter made out of MS rectangular hollow section 76.2x35mm medium grade as in stile/top rail/bottom rail and middle/lock rail 63.5x35mm med gde welded jointed in one piece open rebated & prepared to receive gauge etc with 10mm square gaurd bars/grill of 125mm centre to centre as vertical 3Nos in horizonetle for each pannel and including galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with MS beads for securing wire gauge etc including a shop coat of red oxide complete all as specified & directed.

Supply and fix factory made, flush shutters, solid core construction, with particle board core and plywood face panels, commericial type on both sides, 35mm thick, complete all as specified and directed.

Material and labour for 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Supply and fix butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 size, ISI marked, complete all as specified.

Supply and fix aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 12mm, ISI marked, complete all as specified.

Supply and fix door handle aluminium anodized of size 200mm, ISI marked, complete all as specified and directed.

Supply and fix 150mm, mild steel ordinary rat tail rod pattern helical door springs including roller and roller plate fixed with screws or with welding to existing MS frame. cowkhats incl necessary welding/screws complete all as specified and directed.

Supply and fix aluminium anodised, sliding door bolts250mm size with hasp staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing and sliding bolt of extruded sections or cast- aluminium alloy and fixed ISI marked complete all as specified and directed.

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden beadings for securing wire gauge with wire stopples complete all as specified and directed.

Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire staples complete all as specified and directed.

Supply and fix as in repair drapery rod (conduit) of dia not less than 25mm having a corrugated virgin PVC extrusion on it and ABS plastic rings & finials of approved shade with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws complete all as specified and directed.

Supply and fix aluminium anodised window frames with glazed shutters using standard aluminium section of approved make with following specification (a) Top, bottom and side rail of shutter shall be 44.5mm x 44.5mm of 18 gauge aluminium section , side rail 44.5mm x 44.5mm x 18 gauge (b) 5.00 mm thick plain sheet glass to be fixed in glazed portion including rubber packing and aluminium beading (c) Each glazed shutter shall be provided with two Nos aluminium anodized tower bolt 100 mm size , (d) 100 mm aluminium alloy butt hinge 2 No (e) one No aluminium handle 100mm size (f) aluminium grill type DG-117 with fixing clamps and necessary screw (g) stainless steel hooks and eye to be provided as stay of shutter etc (h) min thickness of anodising shall be 15 micron complete including necessary jointing cleats glazing clips rubber packing anodized aluminium snap beading screws anodized aluminium fittings all as specified and directed

Supply and fix aluminium anodised glazed fixed partition with twin stile sectioin 40x65x1.5 mm with 5mm thick frosted glass in top portion and 9mm thick pre laminated particle board both sides laminated in bottom potion fixed with aluminium cleats to Aluminium section with and including aluminium anodized frame of size 40x65x1.5mm thick complete all as specified including suitable aluminium door handle complete all as specified and directed.

Material and labour in repair door closer hydraulically regulated cast iron body designation no 3 universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 kg of aluminium (die cast) body complete all as specified and directed.

Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm aluminium sheet foundation box main body with stainless steel cove governing pivot made or brass, other part made of mild steel heavy duty fixed in repair complete all as specified and directed.

Supply and fix steel window box type using 'P' section comprising double frame for gauged and glazed skeleton shutter jointly with flat iron 40x3mm contineously throughout complete including hinges, handle tower bolts stops, lugs etc (As per TD Drg)complete all as specified and directed . Note (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongries as shown in drgs (iii) guard bars, glazing and wire mesh shall be measured and paid for separately.

Supply and fix factory made mild steel ventilators top hung type with glazing bars 12mm square @ 10 cm complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

Supply and fix 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix figured glass, 3mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.

Supply and fix 5.5 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading/rubber beading) as in aluminium windows/doors n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for repairs to anodised aluminium door shutters and making serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as specified and directed.

Material and labour in repairs 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or beads of sectional area n exc 25 Sqm complete all as specified and directed.

Material and labour as in repairs for factory made solid panel PVC board 18 mm thick as in cup board shelf, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically treated and smell free all as specified and directes by Engr-in-Charge.

Material and labour as in repairs for 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cup board shelves kitchen cup board etc complete all as specified and directed.

Supply & fix in repairs continuous (Piano) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

Supply and fix for hydraulic operated stainless steel hinges, chromium plated, bright finish ISI marked fixed with standard steel screws, complete all as specified and directed.

Supply and fix CP, stainless steel handle fancy type for PVC cupboard and fixed with standard steel screws, complete all as specified and directed.

Material and labour framed work such as gate, grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to FE-410- of Fe-310-0, complete all as specified and directed.

Material and labour for cutting holes in brick wall built in cement mortor for inserting holdfast of size 150x150x230mm and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in filling in steel frame complete all as specified and direted.

Dismantling of AC/Fibre cement (corrugated semi corrugated etc) sheets including ridges in roof covering complete all as specified and directed.

Material and labour for 6mm thick fiber cement corrugated sheets in roof covering etc, fixed with L-type or J-type or cranked hook bolts including bituminous washers complete all as specified and directed.

Material and labour for fiber cement two piece adjustable serrated ridge, 6mm thick fixed with L-type or J-type or cranked hook bolts including bituminous washers complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified and directed.( Note :- Roof height is upto 12.00 M)

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall fixed with self tapping screws complete all as specified and directed.( Note :- Roof height is upto 12.00 M)

Supply and fix rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Supply and fix false ceiling with 6mm thick E board white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including GI grid frame work of size not more than 600x600 mm having 25mm wide t-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 2mm dia GI wire and leveling clips including two coat of oil bound distemper complete all as specified and directed. (Note: All exposed surface of grid shall be powdered coated white). Including dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/ blankets, any thickness, including fillets complete all as specified and directed.

Material and labour for rectifying the leakage of bib taps,stop cocks, angle valve, pillar taps including replacement of rubber /PVC washers complete all as specified and directed.

Material and labour for rectifing the leakage of wall mixers/wash hand basin mixer/sink mixer or any type of mixer including replacement of rubber /PVC washers complete all as specified and directed.

Supply and fix in repair brass spindle of suitable size 3/4" Disc type and shape for stop cock/angle cock/bib cock of existing make as per site of MAP Qtrs complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair cast copper alloy Legs S type for CP brass mixer (S alphabate shape) suitable as in MAP Accn of wall mixer /sink mixer etc screwed down high pressure with or without lettered "Hot' of cold' with long screwed shanks and fly nuts, screwed for iron pipe Make as per sample complete all as specified and directed.

Supply and fix in repair brass chromium plated extension nipple of size 50 to 75mm long for CP bib taps/angle cock etc complete all as specified and directed.

Supply and fix in repair CP brass chromium plated jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

Supply and fix in repair CP brass chromium plated hand faucit with and including 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply and fix in repairs plastic water closet seat cover black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for EWC/Anglo Indian WC complete all as specified and directed.

Supply and fix in repairs CP brass soap dish, of Size 100x70x1mm thick complete all as specified and directed.

Supply and fix in repair 15mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed .

Supply and fix as in repair chromium plated angle stop valve incl flange, any description, suitable for 15 mm bore pipe, complete all as specified and directed.

Material and labour as in repair, 15 mm concealed stop valve, chromium plated, cast copper alloy, high pressure with handle,long body, screwed end for iron pipe or for union and fixed, complete all as specified and directed

Supply and fix as in repair, 15mm bore pillar tap, long shank, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and directed .

Supply and fix in repair wall mixer with 15mm bore chromium plated fancy type cast copper alloy screwed down high pressure with or without lettered 'Hot' or 'Cold' complete all as specified and directed.

Supply and fix in repair single lever sink mixer with swinging spout (wall mounted model) chromium plated fancy type cast copper alloy screwed down complete all as speciifed and directed.

Supply and fix in repair for waste fitting brass chromium plated for glazed ware sinks, basins etc with long screw shanks and flynuts, flanges and bedded in red lead cement and other end fixed for 40 mm bore pipe complete all as specified and directed .

Supply and fix in repair PVC waste pipe 32/40 mm bore as WHB/Sink etc complete all as specified and directed.

Supply and fix as in repair shower arm brass CP for fixing with 15mm bore pipe 195 mm long with bend of 45 degree with flange complete all as specified and directed

Supply and fix in repair for standard kit of PVC internal fittings for low level flushing cistern of same make as of existing of PVC flushing cistern complete all as specified and directed

Supply and fix in repairs for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed (Minium weight 210gms)complete all as specified and directed

Supply and fix as in repair PVC lid cover for water tank for capacity 500 or 1000 ltr complete all as specified and directed

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed complete all as specified and directed.

Supply and fix 20mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down GI steel tubing and connections complete all as specified and directed.

Supply and fix for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down GI steel tubing and connections complete all as specified and directed.

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good cutting not exceeding 10 cm girthin brick wall complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral footrests with 'P' or 'S' trap including making good the disturbed surfaces and to match with existing complete all as specified and directed.

Supply and fixing as in repair vitreous china wash down water closet pan (pedestal pattern), white fixed with 'P' or 'S' trap including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repairs PVC valve less duel type syphonic action type flushing cistern low level white with PVC in let ball valve float and handle 10 ltr capacity and connection to pipe including 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor complete all as specified and directed.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repairs corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated brass bracket guard and railing complete all as specified and directed.

Supply and fix in repair vitreous china wash basin, white/ivory, flat back, size 580 x 440 mm including fixing acessories like galvanised brackets & rag bolts, 32mm CP waste coupling complete complete all as specified and directed.

Supply and fix in repair wash hand basin central hole mixer without pop up waste system, chromium plated, 15mm bore, fancy type complete complete all as specified and directed.

Supply and fix vitreous china urinal half stall type white, (excluding flushing cistern flush pipe and waste pipe) but including waste fitting and connection to flush pipe and outgoing drainage complete all as specified.

Supply and fix in repair 75mm PVC (SWR) floor trap, plain with stainless steel grating including jointing with solvent cement 75mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4), complete all as specified and directed.

Supply and fix in repair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Supply and fixing in repair aluminium door cill with PVC brush fixed with steel screw at bottom rail door shutter complete all as specified and directed.

Supply and fix in repair, kitchen sink with drainage board made of stainless steel 1.00mm thick with plugs, washer and wastes; including bedding in cement mortar and providing cantilever brackets and waste pipe, overall size 940mm x 460mm & bowl size 405mm x 354mm x 178mm, complete al as specified and directed.

Supply and fix as in repair kitchen plate rack of size 900mm x 600mm x 250mm made of stainless steel not less than 0.63 mm thick (SS grade 304) with fixing acessories, complete all as specified.

Supply and fix 1000 Ltrs rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top incl dismantling old unserviceable water tanks & removing complete all as specified and directed.

Supply and fix 500 Ltrs rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top incl dismantling old unserviceable water tanks & removing complete all as specified.

Supply and fix in repair 20mm bore gun-metal valve (quarter turn type) with MS lever handle, suitable for GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified and directed.

All as per item No 95.00 above but 15mm bore complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises for minor repairs to floor in patches complete all as specified and directed.

Supply and fix coloured non skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm , in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in CM (1:4) complete all as specified and directed.

Supply and fix coloured non skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors, and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM(1:4) complete all as specified and directed.

All as per item No 98.00 & 99.00 above but as skirting/dado over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Supply and fix coloured Glazed ceramic tiles in vertical surfaces 350X250X7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white/coloured cement to match, laid over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur green stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like etc over and including screed bed in cement mortar 1:4 or rendering 10 mm thick in cm (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rubbing and polishing including rounding of edges, making holes for gas pipe complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor complete all as specified and directed

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 107.00 above herein but except brick including cleaning of old existing bricks obtained from demolition.

Supply and fix precast RCC jalli 40mm thick of size 450x600 mm (measeured solid) type B-0 (using 12.5mm graded crushed stone aggregate) including all moulding complete all as specified and directed by Engr-in-Charge.

Material and labour for three coats of white washing on new ceiling/chajja sufraces including preparation of new plastered surfaces complete all as specified and directed

Material and labour for preparation of newly plastered surface of wall etc and applying two coat of oil bound distemper (OBD ) over one coat of primer over and including 1mm thick wall putty complete all as specified and directed.

Material and labour for preparation of newly plastered or un decorated surface of wall etc and applying two coats of cement base paint over a coat of primer in any colour complete all as specified and directed.

Material and labour for preparation of new mild steel sufraces of any description and applying two coats of synthetic enamel paint over & including a coat of red oxide primer not otherwise described, over 10 cm in width or girth, complete all as specified.

Material and labour for preparation of wood and wood based surfaces of any description and applying two coats of synthetic enamel paint over & encluding a coat of pink primer not otherwise described, over 10cm in width or girth, complete all as specified and directed.

m/s gupta construction

SHAKTI CONSTRUCTION CO

M/S AGARWAL CONSTRUCTION CO.