Repair Renovation of Primary Health Sub-Centre Building at Jajjar Kotli Block Dansal

Amount

Repairs to plaster of thickness 12 mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 metres lead with cement mortor 1:4 (1 cement :4 fine sand).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws. second class Kail wood (35mm thick)

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg/sqm

Finishing walls with textured exterior paint of required ,- shade: Old work (one or more coats) applied @1.82 ltr/10sqm

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/1 Osqm over and including base coat of water proofing cement paint applied@ 2.20kg/10 sqm)

Applying priming coat with readty mixed primer pink or grey primer of approved brand and manufacture of wood surface (Hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work. (Doors, windows, shutters gate grill railing etc).

10cm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35Kg/Cum of earth and gobri leaping with bhusha at 35kg/Cum of earth and gobri leaping with mix 1:1 (1clay : 1cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1cement : 3fine sand) mixed with 2% of intergral water proofing compound by weight of cement and finished neat with hand moulded F.P.S brick tiles.

Making khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete.

Providing gola 75x75mm in cement concrete 1:2:4 (1cement :2 coarse sand :4 stone aggregate 10mm and down gauge ) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase

Painting top roof with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 codm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. with residual type petrolum of penetration 80/100.

Providing and fixing ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc 15 mm dia. Nominal bore Medium.

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 25 mm dia. Gl pipe Medium.

Providing and fixing ball valve (brass) of approved quality complete 25 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class kail wood 35mm thick

Painting of flower and logos around the Windows & Doors. Proper branding as per Health and Wellness Centres Drawings.

Steel work welded in built-up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates and similar work.

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Sand for an avg. lead of (27.00 Kms lead)

Brick Tiles for an avg. lead of 40.00 Kms..

M/s shafiq constt

VINAY KUMAR

Ajay Kumar