Procurement of ESP Internal Spares for Overhauling under AHP-EM dept. at BkTPS

Amount

BUSH BEARING (VERTICAL SHAFT BUSH),EERM # BHEL # FOR ESP:FAA-6X45-2X108135-2 Additional Data: Bush Bearing Along with Housing for Vertical Shaft Bush of Rapping Mechanism for Emitting , (Bush Size: ID- 40.5, OD- 70, L- 55 mm) ) MOC : Bush C.I. and body made by M.S.,

BUSH,MATERIAL:CAST IRON FOR ESP SIZE: 70 MM(OD) X 41MM(ID) X 55 MM(WIDTH) Additional Data: Bush Bearing (CI Material), Size: 70 mm(OD) X 41mm(ID) X 55 mm(Width) For ESP Internal. MOC : Bush C.I

SET RING FOR COLLECTING RAPPING FOR ESP FOR ESP FAA-6X45-2X108135-2 Additional Data: Set Ring for Collecting Rapping Shaft For ESP, MOC: IS 2062,

INNER ARM ASSY FOR ESP # Additional Data: INNER ARM ASSY FOR ESP # (INNER ARM ASSY FOR ESP # MATERIAL OF CONSTRUCTION : IS 2062 FASTNER GRADE: 10.9 ).

OUTER ARM FOR COLLECTING RAPPING BIG $FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Hammer, Outer Arm For Collecting, Rapping (Big) For ESP Outer Arm-2, Material Of Construction: Round: EN 8, Arm: IS 2062 Pin: IS 2062 )

SHOCK PAD FOR CERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Shock Pad (ESP Internal), 2nos hole of dia 17.5 mm. Dimension:155mm x 80mm width x 29mm thick MATERIAL COMPOSITION : GR 280-520W, IS :1030.

GRIP COUPLING FOR DRIVE ARNGMNT EERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Coupling for EERM (ESP) Grip Coupling, MOC: IS 2062,EN 8.

COUPLING-I OF COLLECTING ELECTRODE RAPNG Additional Data: Coupling- I of Collecting Electrode Rapping, MOC: EN 8

CLUTCH OF DRIVE ARRGT FOR CERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Clutch for Drive Arrangement of Collecting Electrode Rapping, MOC:EN8.

COMPLETE SHAFT FOR EM RAPPING FOR ESP TYPE:F BHEL TOTAL LENGTH=10380 MM,CONSIST OF 3 NOS SHAFT(SHAFT-I:3720MM,SHAFT-II:3590MM,SHAFTIII: 3050MM),2 NOS SLEEVE TUBE & 2 NOS SET RING Additional Data: D50, MOC: EN 8, IS 8500,Stage-I

PIN WHEEL -I,EERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Pin Wheel - I of Rapping Mechanism for Emitting Electrode, MOC: IS 2062,EN-362(PIN WITH CASE HARDENING)

PIN WHEEL -II,EERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Pin Wheel - II of Rapping Mechanism for Emitting Electrode, MOC: IS 2062,EN-362(PIN WITH CASE HARDENING)

THRUST BEARING,EERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Thrust Bearing of Rapping Mechanism for Emitting Electrode, MOC: FE540 , IS 8500

PAD,EERM FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: Pad of Rapping Mechanism for Emitting Electrode, MOC: FG 260, IS 210

SHAFT-I ASSEMBLY,EERM,VERTICAL FOR ESP TYPE:FAA-6X45-2X108135-2 BHEL Additional Data: Shaft- I assembly of Rapping Mechanism for Emitting Electrode, length 2502mm, MOC: EN 8/IS 8500

SHAFT-II,EERM,VERTICAL FOR ESP TYPE:FAA-6X45-2X108135-2 BHEL Additional Data: Shaft- II of Rapping Mechanism for Emitting Electrode,Length 3350mm, MOC: EN 8/IS 8500

SHAFT- III OF RAPPING MECHANISM Additional Data: Shaft- III of Rapping Mechanism for Emitting Electrode, Stage-I (length 3355) MOC: EN 8/IS 8500

SHAFT END OF COMPLETE SHAFT,GDRM FOR ESP TYPE:FAA-6X45-2X108135-2 BHEL LENGTH=1890MM Additional Data: Shaft End of Complete Shaft, ( GDRM,Length 1890,3hole ) MOC: EN 8/IS 8500

SHAFT - II OF COMPLETE SHAFT Additional Data: Shaft - II of Complete Shaft, ( GDRM,Length 4990, 10hole ) MOC: EN 8/IS 8500

SHAFT - III OF COMPLETE SHAFT Additional Data: Shaft - III of Complete Shaft,(GDRM, Length 4205,8hole) MOC: EN 8/IS 8500

SHAFT,COMPLETE SHAFT Additional Data: Shaft , complete shaft of collecting rapping-1(include end shaft, shaft-1, shaft-2) of length 790mm-2hole, 5090mm-17hole, 5285mm-18hole, ( 2 set ring ), D50 MOC: EN 8/IS 8500.

COMPLETE SHAFT FOR CERM-II BHEL TOTAL LENGTH= MM,CONSIST OF 3 NOS SHAFT,2 NOS SLEEVE TUBE-I & 2 NOS SET RING Additional Data: Stage-1 Complete Shaft TOTAL LENGTH= 10885MM, (Shaft Length 4985 mm, 5090 mm & 790 mm respectively, D50, MOC: EN 8/IS 8500

SLEEVE TUBE FOR VERTICAL SHAFT OF EERM FOR ESP FAA-6X45-2X108135-2 Additional Data: Sleeve Tube for Vertical Shaft of Rapping Mechanism for Emitting Electrode, MOC: EN 8/IS 2062.

HAMMER,OUTER ARM # # FOR EMMITTING,RAPPING,SMALL,ESP Additional Data: Hammer, Outer Arm For Emmitting, Rapping (Small) For ESP Outer Arm-1, MOC:IS 2062,EN 8

SLEEVE TUBE- I OF COMPLETE SHAFT Additional Data: Sleeve Tube for Collecting Electrode Rapping Shaft, (Shaft sleeve) MOC: EN 8/IS 2062

SHAFT END,COMPLETE SHAFT,CERM-I/II FOR ESP TYPE:FAA-6X45-2X108135-2 BHEL LENGTH=790 MM Additional Data: Shaft End of Complete Shaft for Collecting Electrode Rapping- I, ( CERM, 790 ) MOC: EN 8, IS 8500

PLAIN BEARING FOR ESP BHEL SUPPLIER Additional Data: Bearing, Plain 6172-0066 For ESP Overall Dimension :160 X50 X 90 mm,Bore Dia-52 mm Hole to hole distance-120 mm Material:C.I.;IS-210 Gr.20

U-GUIDE FOR COLLECTING ELECTRODES FOR ESP FAA-6X45-2X108135-2 BHEL Additional Data: MOC: MS,

SHOCK BAR OF COLLECTING ELECTRODE RAPPING/LOWER HORIZONTAL BEAMS(L=560CM) Additional Data: Shock Bar Angle 100x50x8, (Total 5050mm, length along with shock pad is 5080 mm)

ANDISC ENGINEERS PRIVATE LIMITED (BID ID -6320318)

Thermax Limited (BID ID -6358109)

GEECO Enercon Pvt Ltd (BID ID -6325450)

P.D. ENTERPRISE (BID ID -6346752)