Special Repair to toilet block of Bldg No P-256/01, 02 and P-275/01 of Inf Bn-II at Mil Stn Fazilka

Amount

SCHEDULE 'A' SECTION I (B&R Portion)

Taking down chowkats with shutters (without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) removing to store

Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified.

Taking down shutters and refixing of shutter of any description exc 1 sqm and n exc 2 sqm each in the same opening.

S&F PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and designs.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 125 mm long aluminium handle cast type anodized.

S & F 150 mm long aluminium anodised barrel tower bolt of extended section and fixed.

S & F 100 mm long butt hinges extruded alumiunium alloy with galvanised mild steel hinges pin, anodised and fixed.

S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified.

M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified.

S & F Flush shutters, 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I all as specified.

S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer .

Supply & fixing in repair steel ventilators fixed type 1.25mm thick Box type (Primer coat) ERW hollow P dection of size 60 mm x 25 mm single rebated optional full glass or wire mesh. Note :Glass and painting shall be measured & paid seperately under appropriate items & Mesh also.

S&F in Guard bar 10mm square bars with (primer coated ) with 25 mm x 3 mm thick MS Flat all around the frame of windlow / ventilator. Note :Painting shall be measured & paid seperately under appropriate items

M&L preparation of new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm

S & F 3 mm thick pin headed sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M & L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

Supply only liqid water proofing compound.

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L glazed ceramic tiles 450X 300X 7mm colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4.all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry to match the work using colour tiles over screed bed on bedding layer of mortar 15mm thick is CM 1:6.all as specified.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L 25 mm thick Cement Conrete1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer.

M&L Granite (of any type) tiles 18mm - 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20mm thick rendering in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick wk built in cement mortar

M&L brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

Demolation of cement concrete ( Re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL)

M&L for reinforcement 10mm and over, cut to length , bent to shape required , including cranking , benching sprirally for hooping for columns , hooking ends and binding witjh and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quantity confirming to IS all as specified.

Formwork to soffits of suspended slabs such as roof slabs , floor slabs , landing and similar work exceeding 200mm thick all as specified

M&L for RCC (nominal mix) 1:2:4 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landing , balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Dismantling water tanks and removing to store of 1000 ltr capacity

S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified.Make -

S&F 20 mm float ball valve high pressire of PTMT with epoxy coated aluminium rod & high density platic ball screwed for iron pipe and fixed. ( Min weight 15 mm - 142 gms/20 mm 210 gms/25 mm 455gms/40mm 690 gms)

S & F Vitreous china white OVAL wash basin of size 550 x 400 mm including brackets, waste pipe and waste fitting 40 mm brass chromium plated and waste pipe and 15 mm dia PVC connection with brass nuts as in repairs complete all as specified and as directed.

S&F Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white with integral foot rest and ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position and embedded lean/lime concrete bedding,

S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed by Engineer-in-Charge.

S&F PVC 10 ltr syphonic action type flushing cistern, loe level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32 mm bore and connection to WC pan complted all as specified.

S & F in repairs vitreous china Half stall urinal back white, providing and fixing plugs,bedding urinal agianst wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement ,fixing automatic flusing cistern with brackets,flush pipe ,grating,water spreader and union for discharge pipe complete all as specified and directed

Taking up or down steel tubing of 15 mm bore and connections, including cleaniong for re-fixing or removal of store.

S&F chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent

Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store

Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.

Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store

Supply & fixing mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.

S&F in repair 20mm bore size stop cock/gate valve cast copper alloy screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe complete.

Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles complete all as specified and directed

M&L for PCC (1:5:10) using 40 mm grageded burn brick aggregate as in foundation, filling & mass concrete or filling in sunken floor complete all as specified and directed.

M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified.Plan area shall be measured

Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .

Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F PVC (SWR) bends 110 radius complete all specified and directed.

S&F PVC (SWR) branch piece,single (single Y) 110 mm redius complete all specified and directed.

S&F PVC (SWR) branch piece,double (Double Y) 110 mm redius complete all specified and directed.

Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F PVC (SWR) bends 75 radius complete all specified and directed.

S&F PVC (SWR) branch piece,single (single Y) 75 mm redius complete all specified and directed.

S&F PVC (SWR) vent cowl 75 mm redius complete all specified and directed.

S&F PVC (SWR) floor trap 75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 complete.

S&F PVC (SWR) floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 complete.

S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .

S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) , cast copper alloy complete.

S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.Make:jaquar/ESSESS/Hindware or Equivalent.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified & directed by Engineer-in-charge.

S & F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.

S&F in repair towel rail 20mm dia, D type 60cm long between flanges brass bran chromium plated. Make -hindware. Esser etc equialant.

S & F in repairs, soap dish chromium plated brass complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore CP angle cock one way chromium plated, high pressure with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified.

S&F PVC waste pipe 32mm dia & 90 cm long Complete all as specified and directed.

S&F PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified.

M&L 50mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement.

M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed.

SCHEDULE 'A' SECTION-II (E&M PORTION)

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.

M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for one light point/fan point/5 Amps switch socket/bell/engagement light controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.

S&F switch Piano type single pole one way 5 Amp,230 VAC supply.

S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .

S&F socket Pinao type 6 Pin 16 amp,230 VAC .

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.

Supply & fix LED tube light along with fixture,18W

S&F Distribution board made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 4 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps all as specified and directed.

S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps all as specified and directed.

M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 6 sqmm cable and will be measured as one length).

Taking down carefully, dismantling exhaust fan of any make sweep and size and reassembling after necessary repairs overhauling,greasing, oiling and replacement of worn out spares, sealing cable ends, dismantling blades, opening up for inspection and transportation to contractor’s workshop and back including hanging, fixing and connecting up and testing complete all as directed by Engineer-in-Charge.

Material & labour for rewinding of Exhaust fan motorof any size with super enameled copper wire of existing specification, gauge and weight including insulating etc complete all as specified and as directed by Engineer-in-charge.

KATARIA CONSTRUCTION