8425 ADDITION ALTERATION AND REFURBISHMENT TO OFFRS AND SAILORS BATHROOM RESTROOM AT MARITIME WARFARE CENTRE MWC OF ND MBI ADDITION ALTERATION TO ROOM NO 102 AND RENOVATION OF SAILORS WASH ROOM TOILETS WEAPON ACCEPATANCE TRIAL TEAM 1ST FLOOR OF P 189

Amount

Excavation in post holes any type of soil (or similar holes) each n. exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and as directed.

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.

All as per item No 6.00 above but 20 mm bore GI Pipe.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for complete all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specifed and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M & L for cement concrete type B1 1:2:4 (20 mm graded aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in sub base complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg) as in foundations, filling and mass concrete all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)but half brick thick wall built in CM 1:4.

S&F mild steel works in posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates conforming to grade Fe 290 (Gde-E-165) complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed.

S&F powder coated aluminium of various section as required for doors, window & partion etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed by Engr- in- charge. Make : JINDAL/HINDALCO/INDALCO (i) The rated quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as hinges, handles, locking arrangemnt etc as required, which shall not be measured for arriving the weight. (ii) Items shall be as per weight of aluminium section. (iii) The rated shall be inclusive of complete packing with silicon gel areound contacting surfaces of aluminium work and including matching the existing surface area.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

M & L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane

S & F 100 mm stainless steel Butt hinges.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

M&L Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) as in sub-floors, sub-bases, floors and pavings etc. complete all as specified and as directed.

M & L for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with water proofing chemical pidiproof LW+ at the rate of 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and directed by EIC. (Note : Water proofing liquid will be measured & paid separetely)

M & L for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or teckforce 2K STRONG in chowksey Chemical as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as specified and directed by EIC.

Supply only water proofing chemical pidiproof LW+ of Dr fixit or equivalent.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 36 above but 20mm dia medium GI Pipe

S & F in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece complete all as specified and directed. (Make-Jaquar)

S & F in repair for health faucet ( Jet) 1 m long easy flex tube in chrome finish and wall hook with N.R.V (Back flow preventer) with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F in repairs 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete.

S & F white glazed earthern ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete

S&F counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed Make _ Jaquar CAT PART NO- ALS-WHT-85601

S & F in repair for urinal pot with sensor size 370x900x610 mm star white complete all as specified and directed (Hindware CAT PPART NO-60018).

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-1989) complete all as specified and as directed

S&F Corner glass shelf with brackets (Make - Jaquar CAT PART NO- CAN-1173) complete all as specified and as directed

S&F 600 mm glass self assembly fency type with CP frame (Make - Jaquar CAT PART NO AKP-35771P) fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge. (Make - Jaquar CAT PART NO- FLR-CHR-5015).

S&F in repairs CP bib cock 15 mm bore complete all as specified and as directed by Engr-in-Charge (Make Jaquar CAT PART No- CON-CHR-047KN).

S&F in repairs two way CP bib cock 15 mm bore with wall flange complete all as specified and as directed by Engr-in-Charge (Make Jaquar CAT PART No- KUP-BCH-35041PM).

S&F in repairs CP angular stop cock with wall flange of 15 mm bore (Make - Jaquar CAT PART NO- CON-CHR-059KN). complete all as specified and directed by Engr-in-Charge.

M&L stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F towel rail 60cm long between flange, fixed in repairs (Make - Jaquar CAT PART NO- ACN-CHR-1111NM). All as specified and directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

S&F 160 mm dia PVC ( SWR) grade double T/Y with access doors including fixing clips

All as per item No 47 above but 110 mm dia

All as per item No 75 above but 75mm dia

M&L Cast Iron floor trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). All as specified and directed.

M&L Cast Iron Nahani trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). All as specified and directed.

M&L for Water proofing plaster 15 mm thick on Brick masonry surface or surface in 1:6 and finished even and smooth with out using extra cement. complete all as specified and directed by EIC (Note : WPC will be measured and paid seperated).

M & L for rendering 20mm thick on fair faces of brick work or concrete Surface in CM 1:4 using water proofing chemical pidi proof LW+ @ 3% by weight of cement and finished even and smooth with out using extra cement. complete all as specified and directed by EIC (Note : Water proofing liquid will be measured and paid seperately.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed by EIC.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

S & F Vitreous china urinal partition white of size 310x700 mm slabs, terminating about 40 cm above floor line, fixed in repairs complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F Bathroom Cabinet Mirror 500x400 mm screwing in all conrner with chromium plated brass screws and cup washers all as specified and directed. (Make Prayag : Cat Part No 556).

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers.

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

S & F in repairs prelaminated 18/19 mm thick particle board, exterior grade, prelaminated one side with decorative choice lamination both side balancing white lamination, fixed with screws to timber frame work all as directed and approved and specified.

M&L for 20 mm thick granite maching cut as in steps, window cills, cooking platform, working table and making counter for wash hand basin etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).

Removing building material exc. 1.50 km but n exc. 5 km and depositing where directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed by EIC.

M&L Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed by EIC.

Supply & fix 15 mm CPVC pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

All as per item 31 above but 20 mm bore .

All as per item 31 above but 25 mm bore .

S&F in repairs Vitreous China, semi-pedestal pattern (Anglo-Indian Type) including P trap and plastic sheet cover with nuts and bolts etc all as specified and directed.

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S & F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe. Complete all as specified and directed by EIC.

M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).

M&L fr 25mm thick fine sand cushion to a line and slope etc including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, glossy finished of approved colour laid and jointed with grey cement and pigment complete all as specified and as directed. Make:- NITCO/VITCO

M & L for machine pressed precast concrete interlocking paver block with Grey cement and confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete over 25 mm thick sand cushion all as specified and directed by EIC.

M & L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceilling board tiles deep panel suspenser system made out of powder coated GI sheet main tee of size 23.5 x 40 x 0.63 mm and cross tee size 23.5 x 23.5 x 0.63 mm and angle size 19 x 19 x 0.63 mm including 3 mm GI wire for suspending bolts necessary washers nut/ clits/ pin hook etc. For securing frame work for ceilling to the snap gride all as directed by Enginner-in-Charge including provn of necessary hole/ cutting for providing lights/ fans as required including making necessary recesses/ projected patern compete all as specified and as derected. Make - Armstrong/ Chanakya/ Everest

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and as directed

S&F Supply & fix vitreous china WHB oval shaped fixed on countersunk stone slab platform including 15 mm dia x 600mm long flexible inlet pipe, 32 mm waste coupling, 40 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed to outlet pipe, coupling etc complete. (Stone slab will be measured & paid seperatly)

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement fixed in repairs.

S&F 15mm bore dia of pipe brass chromium plated fancy type Bib tap fixed in repairs.

S&F 15mm bore dia of pipe brass chromium plated fancy type Two-in-one Bib tap fixed in repairs.

S&F in repairs 15mm size stop Valves fancy type chromium plated screwed down high pressue with crutch or butterfly handle screwed both ends.

S&F PVC Connections 15mm size with PTMT nuts of length 600mm.

S&F self closing taps cast copper alloy chromium plated screwed for iron pipe 15mm bore.

S&F Mild Steel Soap dish, any type, approximate size 160x160x90mm fixed in repairs.

S&F brass chromium plated, tabular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.

M&L for preparation of newly plastered surfaces of ceiling, applying one coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer.

Hard drawn steel wire fabric cut to length bent to shape reqd and tying with and incld mild steel wire (annealed) not less than 0.9mm in dia supplied and fixe din reinforcement not excd 4 Kg per sqm.

Removal of debris old concrete spoils etc excd 5 KM but not excd 15 KM complete all as specified and as directed outside MD Land.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 . Complete all as Specified and Directed.

M & L for Plywood, 18 mm thick grade BWP, type BB fixed with screws to timber frame work etc all as specified and directed by Engr-in-charge.

M & L for Prelaminated sunmica 1 mm thick exterior grade, with decorative choice lamination & , fixed with adhesive (as per manufacture instructions) to timber frame work. all as specified and directed by Engr-in-Charge.

S & F Butt hinges, 75 mm long extruded brass, with mild steel hinge pin, bright polished and fixed, type B-12. All as Specified and directed by Engr-in-Charge.

S & F Extruded Extruded brass handles, fabricated type polished. All as Specified and directed by Engr-in-Charge.

S & F for ball spring catch 65 mm adjustable spring ball latches brass french door top latch strong drive in wall catch closet for almirah shutter. All as Specified and directed by Engr-in-Charge.

M&L for godrez lock for locker 4 lever including all associating fitting all as specified and directed.

Dismantling and taking down the existing old perished PVC insulated Aluminium conductor point wiring of light/fan 5/15Amps socket bell point etc complete with all fittings accessories, such as switches, switch sockets, ceiling rose etc from the surface casing/capping and concealed wiring including making good the disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

M&L point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size 1100Volts grade drawn through and including non-metallic rigid PVC casing and capping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable of size 1.5sqmm as earth continuity conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:

One light point controlled by one switch

One ceiling fan/ wall fan/ exhaust fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5 Amps switch socket combination on same board

M&L point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size 1100Volts grade drawn through and including non-metallic rigid PVC casing and capping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable of size 2.5sqmm as earth continuity conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:

One 5pin, 15 Amps switch socket combination on same board

S&F LED down light fitting 12W 230V, recess/surface mounted type, integrated type with frosted diffuser etc complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F LED light fitting 1x10W 230V, 2 feet surface mounted type, T-5 LED batten, integrated type etc complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

S&F switch piano, flush type single pole, one way 5 Amp 240V complete all as specified and as directed.

S&F switch piano, flush type single pole, one way 16 Amp 240V complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5A 240V AC flush type complete all as specified and as directed.

S&F socket outlet 2/3 pin, 15A 240V AC flush type complete all as specified and as directed.

S&F Ceiling rose surface bakelite three terminal of size 60 x 50mm, 240 Volts AC complete all as specified and as directed.

S & F flush type fan regulator electronic 2 module 120W, 240 Volts AC complete all as specified and as directed.

S & F steel sheet double door type for mounting MCB DB SPN 8 way, 240 volts AC factory made suitable for housing MCB SPN and SP alongwith bus bar rating 200 Amps, dust and vermin proof complete all as specified and as directed.

S & F MCB, SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and as directed.

S&F MCB SP 6-32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and as directed.

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connecting up with and including three core PVC insulated, PVC sheathed copper conductor flexible cable of size 23/ 0.0076 mm complete all as specified and as directed.

S & F exhaust fan of sweep 380 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connecting up with and including three core PVC insulated, PVC sheathed copper conductor flexible cable of size 23/ 0.0076 mm complete all as specified and as directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl complete all as specified and as directed. Note - Back-fill compound shall not be mixed with any soil while pouring in the bore hole.

M&L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm GI pipe light grade for protection complete all as specified and as directed.

Supply, Install, Test and Commissioning wall mounted Split type AC 2.0 TR capacity units indoor/outdoor complete with cordless remote control unit, 220-240 Volt, 50 Hz, single phase fitted with high quality rotary compressor and with in-built air ioniser and Plasma filter for better indoor air qulaity with 5 star rating complete all as specified and as directed. Note: (a) Rate of supporting brackets for outdoor units is deemed to be included in rate quoted. Make: Daikin/Hitachi/LG

Supply, Install, Test and Commissioning wall mounted Split type AC 1.5 TR capacity units indoor/outdoor complete with cordless remote control unit, 220-240 Volt, 50 Hz, single phase fitted with high quality rotary compressor and with in-built air ioniser and Plasma filter for better indoor air qulaity with 5 star rating complete all as specified and as directed. Note: (a) Rate of supporting brackets for outdoor units is deemed to be included in rate quoted. Make: Daikin/Hitachi/LG

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps 240V including taking down old existing unserviceable enclosure complete all as specified and as directed.

M&L for submain wiring with 2 runs of 4sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non-metallic PVC casing & capping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC tee etc fixed on wall complete including connecting up complete all as specified and as directed.

Supply, fixing and clamping, jointing copper tubing for suction line and for liquid discharge line insulated with suitable insulation material including making hole in wall for passing through and making good disturbed surface complete all as specified and as directed.

Supply and fix MCCB 4pole 100A, 16KA complete all as specified and as directed.

MADHU ENTERPRIZES

SAI SIDDHI CONSTRUCTION

RAJU ENTERPRISES