REPAIRS TO PERIMETER SECURITY WALL, PATH, HARD STANDING AND DRAINS AT CABS, INS TANAJI, NOFRA AND NSB UNDER GE (NW) MANKHURD

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion of concrete and making good disturbed ground complete all as specified and directed.

Dismantling old chain link fencing of any size or mesh complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone boulders built in cement mortar including all quions, arches, pillars etc but excluding ashlar facing dressed stone work & precast articles complete all as specified and as directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for brick work in CM (1:6) using sub class 'B' bricks strainght or curved on plan exc 6mtrs mean radius etc complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified & directed. Note: PCC bond stone and face work shall be measured and paid separately

Ditto All as per item No 9.00 but except stone

Excavation in trenches,n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shaft, well, cess pits, manhole, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 mtr depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L for TMT CRS steel bars 10mm dia and over, cut ot lenth,bent to shape required,including cranking bending spirally for hooping for columns,hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L PCC block masonry with solid blocks, grade C (5.0) exc 10 cm in width and setting in cement mortar (1:6) etc complete all as specifiend and directed.

Returning,filling in,including spreading, levelling,watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specifiend and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specifiend and directed.

M& L for preparation of new plaster/concrete surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coat of 100% anti fungal acrylic exterior emulsion paint etc including necessary scaffolding up to 24 m height complete all as specified and directed

Extra over stone walling for hammer dressing to face stones and dressing of face bed with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed

M& L for raised pointing to random rubble masonry uncoursed or brought upto courses in CM 1:4 , complete all as specified & directed.

M&L plain cement concreteType B-2 1:2:4 (40 mm graded aggregate) posts (including caps and bases) bed blocks , retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded agg as in coping of surface channel or similar work all as specified and directed.

M & L for precast solid bond stone in 1:2:4 type B1(using 20 mm graded stone aggregate) exceeding 10 cm in width, set in cement mortar 1:6, complete all as specified and directed. Note: The quoted rates shall also be deemed to include for provision of form works/ moulds etc.

S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc similar work including all necessary drilling, bolting or riveting etc & flat iron fillets for securing wire mesh etc conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S & F rolled mild steel framed work as in roof truss or similar work of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

M&L for PVC coated galvanised chain link fencing of wire mesh size 50 mm x50mmx3mm weight not less than 2.18 Kg/Sqm (weight inclusive of PVC coating) including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified and directed.

S & F in repairs barbed razor type concertina coil DG hot galvanised spring for site wire manufactured by M/s Special steel Ltd or M/s Super Fence or Global Engrs as approved by GE, 1.45 to 1.50 Kg/metre and dia of coil when stretched 610 mm complete all as specified and directed.

S&F mild steel scews bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but n.exc 10 cm long dia of neck 5 to 10mm complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provn of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

M&L Pre-cast cement concrete cover slab for manhole and drain cover type B1 (1:2:4) (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces including demolition of existing RCC cover complete all as specified and as directed

S&F factory made medium duty cast iron cover with frame size 900x600mm (min wt 175kg/cover) for man hole & drain cover, fixed in position including demolition of existing Rcc cover complete all as specified and as directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of previously untreated surfaces of steel and iron exc 10 cm width or girth complete all as specified and directed.

Demolition of stone slabs and tiles of any description laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and directed.

Dismantlling floor or wall tiling incl removal of cement mortar bedding (but not backing) removing tiles to store and rubbish off the premises complete all as specified and directed.

M&L 100 mm thick plain Cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in flooring finishing cement concrete surface even & smooth with out using extra cement complete all as specified and as directed

M&L 75 mm thick plain Cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed

M & L 20 mm thick Baroda Green Marble Stone Slabs as in flooring, treads, risers, landing etc bedded, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of slab including cutting and polishing, laid over and including 15 mm thick screed bedding layer in CM 1:4, complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match. Colour is approved by GE

M&L for Durastone Heavy Duty vitrified tiles 300 mm x 300 mm x 10-12 mm thick in floor set and jointed with neat cement slurry and pointed in coloured cement to match over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified.

M&L Machine pressed precast concrete interlocking paver block coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushioning complete all as specified and as directed

M& L Pre Polished Chequred cement concrete tiles 30cm x 30 cm x 20 mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of grey white cement in equal proportions over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and as directed

M&L in repairs for synthethic outdoor sport surface. 8 layer cushion system 1. The first layer consists of one coat of bio cum primer, 2. There on application of one coat of resurfacer 3. Three coats of cushion coats 4. There after two textured coats 5. Finally one non textured coat

M& L for preparation of old/ plaster/ concrete surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coat of 100% anti fungal acrylic exterior emulsion paint etc including necessary scaffolding up to 24 m height complete all as specified and directed

Extra over stone walling for hammer dressing to face stones any dressing of face bed with maximum depression on fair face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed.

M&L for RMC M-25 as in mass concrete, as in hard standing or like surface making smooth surfaces using extra cement etc complete all as specified and directed. Note : Design mix shall be carried out from approved lab such as IIT/ NIT/ SEMT Pune/ any NABL approved lab/ Govt Engg College

M&L for joint cutting in concrete surface 8-10mm wide mechanically and filling with polyurethane material upto 12-15mm from the top surface all as specified and directed

M&L for PCC 1:2:4 type B2 (20mm graded aggregate) as in surface channels and drains complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto. Note : A sum of Rs 45,365.00 towards sch of credit shall be deducted to arrive the contract sum.

M/s Hari Om Construction

Parmatma Enterprises

bajaranga enterprises