SPECIAL REPAIR OF BLDG NO T-01 AT HQ 7 INF BDE CAMP AT KANPUR CANTT UNDER GE (I) KANPUR

Amount

Demolition of reinforced (reinforcement cut as required to facilitate demoltion) cement concrete of any description and any position not otherwise specifically provided for complete all as specified and directed.

M&L for Nominal mix Type B0 (1:1.5:3) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, chajjas, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed.

M&L for Mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, for hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed.

M&L Brick work old size sub class 'B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with old size sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 14-18 mm thick Granite (of approved colour) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and poilishing complete all as specified and directed.

Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed

M&L 15mm thick rendering on fair faces of brick wall in CM (1:4) finished fair & even complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished fair and even complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 1mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. Note : Cost of M&L for wall care putty will be paid under separate item.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer & over applying a coat 1 mm of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. Note : Cost of M&L for wall care putty will be paid under separate item.

M&L preparation of new surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Supplying and applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed. Note : The Coverage is to be strictly maintained for film formation.

M&L for complete removal of any existing treatment using electric drywall orbital sander and applying a coat of 1mm thick wall care putty on wall and rubbing the surface with sander to achieve a smooth surface and sharp straight edges etc.and applying two coats of oil bound distemper (any colour) complete all as specified and directed. Note : Cost of M&L for wall care putty will be paid under separate item.

M&L for complete removal of any existing treatment using electric drywall orbital sander and applying a coat of 1mm thick wall care putty on wall and rubbing the surface with sander to achieve a smooth surface and sharp straight edges etc. & applying two coats of exterior weather proof anti algae 100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. Note : Cost of M&L for wall care putty will be paid under separate item.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying Two coat of white wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying Two coat of white wash complete all as specified and as directed.

M&L for rubbing, Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for 400 x 400 mm Non skid ceramic coloured tiles of approved colour & 7 - 8 mm thick as in floors etc; fixed with spacers (Light weight plastic of 3mm size) and epoxy grouting of joints mixed with pigment to match the shade of tiles over screed bed complete all as specified and directed. Note:- Screed bed shall be measured and paid separately under respective item of BOQ.

M&L for 450 x 300 mm polished glazed ceramic tiles of 6 to 7 mm thick of approved colour on vertical surfaces of walls such as in dado etc; fixed with spacers (Light weight plastic of 3mm size) and epoxy grouting of joints mixed with pigment to match the shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

M&L for 600 x 600mm 7-8 mm thick Non Skid ceramic tiles of approved colour in floors, fixed with spacers (Light weight plastic of 3mm size) and epoxy grouting of joints mixed with pigemnt of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Description all as per srl item No 28 here in above but as in skirting, dados, laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

M&L for cutting chases for concealed water tubing and making good in CM (1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed.

S&F GI steel tubing 15mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed.

S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet, ball float and handle including brackets complete all as specified and directed.

S&F 15mm bore PVC connection 450mm long heavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed

S&F in repairs 15mm bore dia bib taps fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angular stop valves, cast copper alloy, fancy type 15mm bore chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm bore, CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified.

S&F in repairs brass chromium plated shower rose 125 mm dia with swivel joint complete all as specified and directed.

S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed.

S&F in repair vitreous chinaware Anglo Indian type water closet pan (Semi-Pedestal pattern), white with and including white seat & cover with flat bottom with CP hinging device complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding including trap set complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Soap dish, chromium plated complete all as specified and directed.

S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete all as specified and directed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including plugs, urinal spreader, beddings urinals against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.

S&F White Vitreous China counter type Oval wash basin of min. size 560 x 400 x 200 mm mounting above granite counter including waste pipe, coupling or any connected accessories complete all as specified and directed.

S&F 40 mm Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 250 Ltrs and n exc 500 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B1 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F cast iron branch pieces 100mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron branch pieces 75mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F CI vent cowl of size 75mm / 100 mm dia complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5sqm but n.exc 4.00sqm complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 71 above but size 65 x 125 mm complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant and including S&F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F in stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed.

S&F 200 mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessories complete all as specified and directed.

S&F 250 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 75mm long stainless steel type door stopper with rubber shoes in bottom complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F in repair 100mm M.S butt hinges heavy wt. with MS frame work by spot welding including necessary arrangement and handling of welding machine upto third floor of Bldg complete all as specified directed.

M&L Painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with two coats of synthetic enamel paint over and including a coat of red oxide primer including preparation of newly or previously untreated surface complete all as specified and directed.

M&L Painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with one coats of synthetic enamel paint on old surface complete all as specified and directed.

M&L Painting to wood and wood based surface of any description over 10cm width or girth including one coat of synthetic enamel paint on old surface complete all as specified and directed.

S&F powder coated factory made aluminium window and ventilators (glazed & gauzed) shutters with frame as per Drg. no. LZ/C-TD/144 dt. 30 May 2017, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays hinges, tower bolt, suitable handle complete all as specified and directed. Note:- No extra payment will be made for glass, gauze and fittings & Net Opening will be measured for payement purpose.

S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type, including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Taking down shutters with frame of any description exc 1sqm n exc 2sqm each and refixing in the same opening after resecuring or easing & adjusting also making good dismantled portion complete all as specified and directed. Note : No extra payemnt will be made for making good dismantled portion.

S&F in repair 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F in repair 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F in repair 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F in repair stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm average width of operature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.

S&F in repair 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

S&F 19/20mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick as in CB shutter, writing table and bookshelf comple all as specified and directed.

S&F in repair continuous piano hinges brass bright finish or electro galvanised width of flaps when open in 30 mm complete all as specified and directed.

M&L 125mm size stainless steel handles complete all as specified and directed.

S&F Stainless steel heavy duty cupboard magnetic door catcher including screws / fixing accessories complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed.

Dismantling of terracing tiles/brick tiles single layer on roof, laid bedded and pointed in any mortar complete all as specified and directed.

Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in padding, coping, roof kerb incl hunching, benching etc with non shrink chemical and curing with curing compound complete all as specified and directed.

M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces/roof top mixed with water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note :WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions complete all as specified and directed. Note: 1. The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.

Taking up or down 40 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

Demolition of Concrete of any description incl top finish and in any position complete all as specified and directed.

S&F GI steel tubing 40 mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for cement concrete (1:2:4) Type B0 (using 12.5mm graded stone aggregates) laid in slope towards drainage out spout pipe mixed with waterproofing compound as per manufacturer instructions drainage spouts shall be provided integrally while laying PCC complete all as specified and directed. Fixing of spout shall be done with same PCC as in this item.

M&L for Preparation of plastered floor surface by cleaning surface free from dust and other foreign materials etc. and laying in repair Atatic poly propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete required complete all as specified and directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings as specified and directed.

S&F of Pre- painted galvalume aluminum zinc coating GI based profile sheet TCT with gsm -150 sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness incl top finishing if exist at site (below or above ground level) un-reinforced concrete complete all as specified and directed.

M&L for cement concrete Type D2 (1:4:8) (using 40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and in consolidation complete all as speified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 & ISI Marked of 80 mm thickness M-40 Grade with grey cement and pigment (Red & yellow) complete all as specified and directed.

M&L for cement concrete Type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in edging portion of paver block for proper matching with existing surface complete all specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

M&L for point wiring for one light/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 127 above but upto ceiling height and on surface at ceiling complete all as specified and directed.

All as per item No 127 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl PVC conduit complete all as specified and directed.

All as per item No 127 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

All as per item No 127 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

M&L for switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for socket 5 amps 3 pin flush type, 230 volts complete all as specified and directed.

M&L for socket out let, 3 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed.

S&F PDC Housing LED Bulkhead 10 watt luminaire with opal diffuser, equipped with 2kV in- built surge protection with IP 65 protection rating complete all as specified & directed.

S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 9 Watt Lumen (AC) 900 Lumen (DC) 350 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified & directed.

S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way with appropriate size copper bus bar and neutral link with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as of VTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board, 8 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed.

S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No 144 above but SPN 40 to 63 Amp complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

Dismantling and taking down exhaust fan and deposited in MES Store & Supply and fixing of Exhaust Fan AC single phase 230/240 volts of size 300mm sweep with louver shutter including providing/cutting the round hole of required size in wall, grouting of nuts, bolts, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material complete all as specified and directed.

murty construction company (BID ID -3324044)

U.R ASSOCIATES (BID ID -3325493)