REPAIR TO ROAD SIDE FURNITURE AND INDICATION BOARDS UNDER GE (AWC) MHOW.

Amount

S & F in repairs ABS plastic body Road Studs (cat eye) highly reflective and can withstand a load of more than 20 Tons, fixed to road surface with MS Stud/Anchor bolts complete all as specified and as directed, Make:- Dark Eye-DA978 / Kohinoor-KE55 / 3M / Ladwa

Supply and fix in repairs 'Solar Road stud 125x125x25 mm. Solar Road stud made from Aluminium alloy, Solar powered by monocrystal solar panel, fix with epoxy or other suitable adhesives as per manufacuture instalation and following specification :- (i) Battery Type-. One high capacity Ni-Cd rechargeable battery. (ii) View distance of solar stud shall not be less than 1000 mtrs.\n (iii) LEDs shall be 10mm, 3 pieces each side and total 6 pieces for high brightness colours (iv) Back up time shall not be less than12 hours of continous lighting at night. (v) Designed to bear 25 Tonnes load. Make:- Dark Eye-Dhruv/ or equivalent

Supply and Fixing Anti theft and Anti vandalism Delineators MS rectangular body with high visibility reflective tape concealed by plastic shell, no possibility of it being peeled off, Height 1200 mm, size 100 mm, color- orange including embedding in PCC 1:2:4 (200x200x200mm) type B1, Earth work & PCC work including in job, complete all as specified and directed. Make- Kohinoor-KE455 or equivalent

S&F in repair Plastic Speed Bump which are highly resistant to severe impacts and harsh weather condition. Its interlocking sub units make it bind perfectly into a one firm bump.the per-colored material (Black/Yellow) and UV stabilizers keep themperpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night. It is made of PE plastic material. Its fixing with metallic bolts/MS stud/Anchor fashner and suitable adheshive are used for installation on road . Available in Yellow and Black colours. Dimensions: L=730mm, width 245 mm & Height= 70 mm ; to be installed as per the directions of Engineer -in-charge. Make:- Dark Eye-DA 1006 / or equivalent

S&F convex mirror 800mm size made of PC material & FRP material is used in making brim & back holding plates with suitable corrosion free with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, "T" junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, complete all as specified & directed. Make- Dark Eye/ Kohinoor/Ladwa or equivalent

S&F stainless steel (Grade 304) railing, posts, shed, chairs, sign board frame, and making frame structure etc. as design approved for fixing sign board with top mounted round baluster made of requied dia made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completed all as specified and directed.

S&F direction sign board of any size with 4mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting of 3M as base and with cut out massage (legends borders letters / numerals/logo etc) ht.of letters up to 150 mm & letters up to 70 nos./sqm as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel completed all as specified and directed.

M&L for painting hinting lines,dashes, arrows, letters etc on roads n. exc 15 cm wide with hot applied thermoplastic compound paint confirm to MOST specified painting as per manufacturers direction specification, mechanically applied to form 1.5mm thick film on road lined mixed with radium glass beads @ 250gm/ Sqm with automatic machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying including cleaning and drying the existing road surface dust, oil, grease and moisture free surface before applying the paint, color of marking approved by GE,complete all as specified and directed.

S&F in repair flexible Spring parking post which are made of specialy PU material with 3 white reflective tapes, It can quickly restore to its original state without damaging the vehicle, tensile strength and UV stablizers enables it to withstand the harsh weather conditions including fixing with epoxy adhesives and metallic bolts/MS stud/Anchor colts are used for installation on road . Ht.not less than 730mm, Dia not less than 75 mm wt. not less than 1.0 kg ; to be installed as per directed. Make:- Dark Eye-DA 963 / /Ladwa/KTI/Pioneer-PS932 or equivalent

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE,complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately).

M & L providing factory made pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in corved stone exc. 10 cm in width and similar articles with plain faces etc set in cement mortar 1:6 including chamfered weathering, throating etc with necessary form work and including demolition of PCC, complete all as specified and directed.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F Reinforced concrete pipes 100 mm bore, class NP2 , laid and jointed complete with collars, complete all as specified and directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat complete all as specified.

M&L for preparation of new concrete surfaces as in road side kerbs and applying two coats of synthethic enamel paint of approved different tints and pattern etc complete all as specified and directed.

M&L for preparation of old concrete surfaces as in road side kerbs and applying one coat of synthethic enamel paint of approved different tints and pattern etc complete all as specified and directed.

M/S Ashish Construction