Shiffting Replacement of C I pipe line100mm 150mm dia providing and laying of API pipe150mm dia 100 mm dia G I pipe line Near H P Sectt Chotta Shimla 2

Amount

Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work,jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.

Providing laying,jointing and testing API pipe 5L grade X-42 pipe of 150mm internal diameter butt welded joints by considering three layers pipes including cost of bends complete as per API pipe conforming to IS/ISO :3183 2019 of following grade & wall thicknesses as per dimensions ,weights and test pressure mentioned below in a random length of 4 to 7 meters including cost of flanges, tees The welding of joints with electrodes as per relevants codes including required number & size of nuts and bolts &metal gasket not less than 3mm thickness as per relevant codes.The welding of joins to be done on both faces in two layers to make the joints leak proof and to entire satisfaction of the Engineer-in-charge.The laying of pipe should be conformed to IS:5822-1994(Earth work in trenches to be measured and paid for separately).The pipes shall be galvanized with zinc coating in three layers confirming to IS:4736-1986 also including dismantling of existingpipeline and stacking it at sainj site .complete in all respects within all leads and lifts as per the direction of Engineer-in-charge.

150 mm dia.wall thickness 5.20mm

Providing,Laying and jointing in trenches galvanised mild steel tube (Medium grade) of following diameters conforming to IS-1239 as specified below jointed with butt welding according to relevant BIS code 816-1969 including all short pieces bends,tee and other specials etc. made from parent tubes as applicable for the particular reach and of approved specifications as per site conditions including flushing, cleaning and hydraulic testing complete to the best satisfaction of the Engineer-in-charge. The laying of pipes should conform to BIS code 5822-1970 within all leads and lifts complete in all respect.

80 mm dia.

100 mm dia.

Providing and fixing Mechanical joint Coller for D I pipe complete in all respect as per the direction of the Engineer-in-charge.

100 mm dia.

150 mm dia.

Providing and fixing M.S.Flange Socket joint for D I pipe150 mm dia complete in all respect as per the direction of the Engineer-in-charge.

Providing and fixing M.S.Flange Socket joint for D I pipe100 mm dia complete in all respect as per the direction of the Engineer-in-charge.

Providing and fixing double flanged cast iron sluice valve of PN 1.60 of Kirloskar/Leader of various dia and capable of with standing the normal seat pressure as per IS:14846 with upto date amendment complete in all respect as per the direction of the Engineer-in-charge.

150 mm dia.

80 mm dia.

Making connection of galvanised steel distribution branch with galvanised mild steel main 100mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.

Take 100mm dia as an average size.

Manufacturing & Fixing GMS tube bend of required degree as per site requirment made out of parent pipe GMS pipe 100mm dia i/c cutting welding of GMS pipe .

Providing and laying cement concrete 1:2:4 (1cement:2sand:4 graded stone agg. 20 mm nominal size)and curing complete excluding cost of form work i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge in :-a) Columns, pillars posts and struts upto floor two level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting, strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 3 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in complete in all respect i/c all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

Columns, pillars, posts and struts : Square, rectangular or polygonal in plan.

Hire charge for Diesel Generator set for cutting/welding of pipe with all leads and lifts complete in all respect.

Hire charge for pickup vehical for Diesel Generator set with all leads and lifts complete in all respect.

kirpa ram

SUNEEL CHAUHAN

Munish Jain