Proposed Construction of New Shri Krishna Institute of Public Administration Building Complex(ATI) at Core Capital Area, Dhurwa, Ranchi.

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of Eli (Mode of measurement compacted volume)

Providing designation 75A brick work in C.M (1: 3) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 A brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size).

Extra for Providing & mixing water proofing material in cement concrete/Plaster work @1 kg per 50 kgs of cement.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Extra for shuttering in curcle work (20%)

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (Excluding landings) except spiral -staircases.

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m for every additional height of 1 metre or part thereof (Plan area to be measured.) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).

All works upto plinth level

All works above plinth level upto floor V level

Extra for providing richer mixes at all floor levels. (Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.) Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately

All works upto plinth level.

All works above plinth level upto floor V level.

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.

Providing Tor steel reinforcement of 8mm. dia rods as per approved design and drawing including cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position (excluding carriage of M.S. bars to work site) all complete as per building specification and direction of E/l. TMT Fe 500 (only valid for Tata (tiscon), SAIL, JSPL, Electrosteel ltd Bokaro and Vizag(RINL))

Providing Tor steel reinforcement of 10mm. rods as per approved design and drawing including cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position (excluding carriage of M.S. bars to work site) all complete as per building specification and direction of E/l. TMT Fe 500 (only valid for Tata (tiscon), SAIL, JSPL, Electrosteel ltd Bokaro and Vizag(RINL))

Providing Tor steel reinforcement of 12mm. dia to 32mm. rods as per approved design and drawing including cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position (excluding carriage of M.S. bars to work site) all complete as per building specification and direction of E/l. TMT Fe 500 (only valid for Tata (tiscon), SAIL, JSPL, Electrosteel ltd Bokaro and Vizag(RINL))

Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., Size of Tile 600x600 mm

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/l.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Hard rock (blasting prohibited)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

All kinds of soil

From 1.5 m to 3.0 m

From 3.0 m to 4.5 m

Ordinary or Hard Rock

From 1.5 m to 3.0 m

From 3.0 m to 4.5 m

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 ) for grading- I Material

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) With Vibratory Roller

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

All works upto plinth level : Concrete of M10 grade with minimum cement content of 220 kg /cum.

Providing and laying autoclaved aerated concrete blocks masonry with 100 mm/ 125mm thick with Grade 1 AAC blocks of density 551 to 650 kg /cum confirming to IS: 2185 (Part 3) up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

Providing and laying autoclaved aerated cement blocks masonry with 150mm to 300 mm thick with Grade 1 AAC blocks of density 551 to 650 kg /cum confirming to IS: 2185 (Part 3) in super structure up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.5 sqm

Granite stone slab all colour and texture except black, cherry/ Ruby red Area of slab over 0.5 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 60 cm circular

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/ Granite/ stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 18 mm thick pre-polished granite stone in dado, skirting, risers of steps etc., on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with cement slurry @ 3.3 kg/sqm and pointing with white cement slurry ad-mixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as per Architectural drawings and as per direction of the Engineer-in-Charge.

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control ) Up to 10 cm in width

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood- 35 mm thick

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0 mm thick instead of 4 mm thick.

Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters With ISI marked stainless steel butt hinges of required size Second class teak wood

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood- 50x12 mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, making grooves, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing fire resistant door frame of section 50X60 mm on horizontal side & 35X60mm on vertical sides having built in rebate made out of 1.6mm thick GI sheet (Zinc coating not less than 120gm/sqm) suitable for mounting 120min Fire rated Glazed door shutters. The frame shall be filled with Mineral wool Insulation having density min 96 Kg/cum. The frame will have a provision of G.I Anchor fasteners 14 nos (5 each on vertical style & 4 on horizontal style os size M10x80) suitable for fixing in the opening along with factory made template for SS Ball bearing Hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or powder coating of not less 30 micron in desired shade as per the directions of Engineer - in charge.(cost of SS ball bearing hinges is excluded)

Providing and fixing 60mm thick glazed fire resistant door shutters of 120 min Fire rating confirming to IS:3614 (Part II) or EN16341:1999 , tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60mmx60mm wide and bottom rail of 110mmx60mm made out of 1.6mm thick G.I sheet(zinc coating not less than 120 gm/sqm) duly filled mineral wool insulation having density min 96 Kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30micron etc all complete as per direction of Engineer-in -charge (paneling to be paid for separately)

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10X120mm

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Extra for pre finished nosing to treads of steps of marble/ granite stone.

Extra for Marble/ granite stone in treads of steps and risers using single length up to 2.0 metre .

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.

Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1: 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase metre

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Ridges plain (500 - 600mm)

Flashings/ Aprons.(Upto 600 mm)

North light curves

Barge board (Upto 300 mm)

Crimp curve

Gutter (600 mm over all girth)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th,the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Preparation and consolidation of sub grade with power road roller of 8 to 12tonne capacity after excavating earth to an average of 22.5 cm depth,dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @ 2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over a tack coat with hot straight run bitumen, including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with river sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. including steel panel shuttering all complete as per specifications and directions of Engineer-incharge. (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineerin-charge.

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.

With granite stone of all colour except black, cherry/ruby red of area less than 0.50 sqm.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. sqm 1719.00

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing aluminium work for doors, windows, ventilators, louvers and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket and filling side gap/cop with Silicon sealant etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion i/c door frames & louvers

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width

Providing, assembling, supplying & fixing of vision glass panels (IGUs), in Aluminium windows, comprising of hermetically-sealed 6- 12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing stainless steel (SS304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. Size 355 x 19 mm

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in charge (Door handle, lock and stopper etc.to be paid separately).

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 5 mm depth and 5 mm width

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/ sqm thoroughly Embedded in the 2nd layer. Using rough kota stone.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and the like consisting of :

Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

IInd course of 20 mm cement plaster 1: 3 (1 cement :3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm.)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.r 48 hours.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.ring for 48 hours.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:

b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.

c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.

d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.

e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.

note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.

note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500sqm from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025

1. Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +3--pa) as per ASTM-E-283-04 testing method for a range of testing limit 1 to 200 mVhr"

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331-09 testing method for a range up to 2000 ml.”

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml”

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item no.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm

made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100) specifications

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Providing and displaying of Araucaria cookie having ht. 1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge

Providing and displaying of Dracaena song of India specimen plant (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge

Providing and displaying of Dracaena mahatma plant, having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge

Providing and displaying of Philodendron Burgundy plant mounted on moss stick 90 cm ht., well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Raphis Palm having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots & as per direction of the officer-in-charge

Providing and displaying of Raphis palm specimen having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge

Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge

Dalbergia sissoo (Seasam) height 120-135 cm. in big poly bag size 25 cm

Providing and displaying of Aglaonema Silver queen plant, having 30cm to 45cm, ht withy 12 to 15 leaves, multi suckers, fresh and healthy leaves, well developed in 25cm size of Earthen pot/plastic pot (Specimen plant) & as per direction of the officer-in-charge

Providing and displaying of Areca Palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed , fresh and healthy lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Areca Palm plant, having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed , fresh and healthy lush green foliage in 30 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Areca Palm plant, having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed , fresh and healthy lush green foliage in 35 cm size of Bucket type cement pot & as per direction of officer-in-charge.

Providing and displaying of Croton Golden speciment plant, having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed , fresh and healthy foliage in 30 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Croton Duck Foot (Elite) plant, having ht. 60 cm to 75 cm with 4 to 5 branches, well developed , fresh and healthy colourful leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Speciman Croton petra Bangalore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed , fresh and healthy foliage approximately 60-65 leaves 30 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Dieffenbachia meaclata plant, having ht. 45 cm to 60 cm with 5 and above leaves, well developed , fresh and healthy & attractive variegated foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Dracaena song of India specimen plant (three in one), having ht. 60 cm & above, well developed , fresh and healthy & with good foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Dracaena victoria plant having ht. 30 cm & above, well developed with full of leaves, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Livistona palm plant having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh and healthy foliage in 30 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Philodendron Xanadoo plant, having 15 to 20 leaves, well developed with full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Raphis palm plant, having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Scheffiera high colour Plant (three in one), having ht. 23 to 30 cm, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing and displaying of Syngonium golden Plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh and healthy leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of officer-in-charge.

Providing Plant Allyssum white in full bloom well developed fresh & healthy plant in 20 cm Earthen Pot / Plastic Pot.

Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Pot / Challi Pot.

Providing Plant Aster Hybrid variety in different colour, well developed, with fresh & healthy foliag in full bloom 23 to 30 cm ht. in 20 cm Earthen Pot / Plastic Pot.

Providing Plant Calendula double variety well developed, with fresh & healthy foliag in full bloom in 20 cm Earthen Pot / Plastic Pot.

Providing Plant Chrysenthemum double variety well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition fresh & healthy with bamboo stacking in 25 cm Earthen Pot.

Providing Plant Chrysenthemum single named variety in different colour well developed, having 45 to 60 cm ht., minimum 150 and above half bloom flowers well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 30 cm Earthen Pot.

Providing Plant Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom good foliage stacked with Green painted Bamboo sticks, 455 to 60 cm ht. in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Dahlia single in different colour with fresh and healthy foliage well developed with 6 to 8 half bloom buds in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Dianthus in different colour well developed with fresh and healthy foliage 30 cm ht., in full bloom with stacking in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Gazania hybrid in different colour well developed with fresh and healthy foliage with full bloom in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Geranium double variety having 30 cm ht., in different colour well developed with fresh and healthy foliage (3 in one) well bloomed in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Gerbera Hybrid well developed with fresh and healthy foliage fully blooms in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Impatients different colour with bloom (3 in one) fresh and healthy in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Marigold jaffri orange/yellow Russet colour well developed with fresh and healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht. in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Kalanchoe Hybrid variety in different colour well developed with fresh and healthy foliage in bloom in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Pansy hybrid Sakata well developed with fresh and healthy foliage with 3 to4 flowers in bloom in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in bloom in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Pholox in different colour well developed with fresh and healthy foliage in bloom in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Poincettia dwarf multi head, having upto 30 cm ht., with 3 to 4 branches with fully differentcoloured top with fresh and healthy foliage well developed in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Salvia ht. 45 to 60 cm multi branches stacking with bamboo stick specimen plants type with full bloom well developed in 30 cm Earthen Pot /Plastic Pot.

Providing Plant Salvia red Hybrid dwarf variety having 15 to 23 cm ht. well developed with fresh & healthy foliage in bloom in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Star of Bethlem (Chinchi-Rinchi), 5 to 6 plant in each pot full bloom with fresh & healthy foliage flower in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Tulip Dutch hybrid variety (3 in one) plants in each pot in full bloom fresh & bright in different colour well developed in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Verbina in different colour having 30 to 45 cm ht. well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Celosia well developed with fresh & healthy 20 to 25 cm ht. (attractive) multi branching at blooming stage in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Cladium Hybrid variety 3 to 4 plants well developed with fresh & healthy 30 to 45 cm ht. in different colour in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Cockscomb well developed with fresh & healthy 20 to 25 cm ht. attractive colours fully bloomed at blooming stage in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Cosmos well developed with fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Gaillardia double hybrid variety well developed with 30 to 45 cm ht. 20 to 30 fresh & healthy flower with green painted bamboo stick in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Gamphrina well developed with 30 to 45 cm ht. bushy plant 15 & above flowers in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Kochia well developed fresh & healthy 20 to 25 cm ht. lush green well shaped in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Portulaka hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot /Plastic Pot.

Providing Plant Sunflower single well developed 8 to 10 half bloom buds multi branched in fresh & healthy full stacked with green painted bamboo stick stacking in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Tapioca variegated (Manihot esculenta) well developed fresh & healthy 30 to 45 cm ht. in bright colour foliage in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted bamboo stick in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Zinnia hybrid double in different colour well developed fresh & healthy 30 to 45 cm ht. (3 to 4 plants in each pot) full bloom in 25 cm Earthen Pot /Plastic Pot.

Providing Plant Standard Rose (H.T. Variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot.

Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. plant in 25 cm size Earthen Pot/Plastic Pot.

Bismarkia Palm 115 to 180 cm ht. plant, well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot.

Cycus circinallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot.

Cycus revoluta in 35 cm challi, specimen plant having 45 to 50 fresh and healthy leaves having 30 cm to 35 cm circumfrance of base stem well developed in 40 cm challi.

Cyprus Golden Conial Shape 150 to 165 cm ht. plant with fresh and healthy Golden colour foliage, in 35 cm Cement Pots.

Euphorbia milli hybrid variety with multi branch, full bloom, with fresh and healthy well developed having 30 to 45 cm ht. plant in 35 cm Cement Pots.

Ficus black vivion piller Topairy (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot.

Ficus Nuda Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210 cm ht. in 40 cm Cement Pot.

Ficus Retusa Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210 cm ht. in 40 cm Cement Pot.

Ficus resnold piller type Topairy well developed with fresh & healthy 210 to 240 cm ht. in 40 cm Cement Pot.

Foxtail palm well developed with fresh & healthy foliage of ht 210 to 240 cm in big 40 cm Cement Pot.

Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot.

Golden Bottle brush Topairy well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot.

Zamia palm well developed with fresh & healthy leaves 90 cm ht. in 35 cm Cement Pot.

Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. plant in 30 cm Cement Pot.

Topairy plant of Casuarina plant with fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. plant in 40 cm Cement Pot.

Traveller palm well developed with fresh & healthy leaves foliage 210 to 240 cm ht. specimen plant in 40 cm Cement Pot.

Washingtonia filifera palm well developed 90 to 105 cm ht. plant having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot.

Providing and Displaying of Alpinia Variegated (three in one) plant having ht. 30cm and above, with fresh and healthy variegated foilage in 25cm size of Earthern Pot/Plasticv Pot & as pedr direction of the officer-in-charge

Providing and Displaying of Clerodendron inerme plant having height 25cm to 32cm multi branched in 20cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge

Providing and Displaying of Dianella variegated plant with 3 to 4 variegated leaves in 20cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge

Providing and Displaying of Duranta Golden plant having ht. 15 to 20cm bushty shape plnat with fresh and healthy leaves in 20cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge

Adansonia digitala (kalp vricksh) of plants ht 150 - 165 cm in bag size of plants 25 cm

Azadirachta indica (Neem) of plants ht 120 - 130 cm in bag polybag of plants size 25 cm

Bassia latifolia (Mahua) height 90-105 cm. in big polybag size 25 cm

Bombax Malabaricum

Boswelia serrata height 150-165 cm. in big poly bag size 25 cm

Butea Monosperma

Cassia fistula (Amaltash) height 120-135 cm. in big poly bag size 25 cm

Chorisia speciosa height 150-165 cm. in big poly bag size 25 cm

Chukrassia tabularis of plants ht. 250 - 165 cm. in big poly bagsof plants size 25 cm

Dalbergia latifolia height 150-165 cm. in big poly bag size 25 cm

Delonix regia (Gulmohar) of plants height 150 - 165 cm in big poly bags of plants size 25 cm.

Erythrina indicia height 150-165 cm. in big polybag size 25 cm

Erythrina variegated height 150-165 cm. in big polybag size 25 cm

Ficus infectoria (Pilkhan) height 150-165 cm. in big polybag size 25 cm

Lagerstroemia flosreginae height 150-165 cm.in big poly bag size 25 cm

Magnolia grandiflora of plants height 150 to 165 cm in big poly bags of plants size 25 cm.

Mangifera indica (Mango grafted) of plants height 60-75 cm in big poly bags of plants size 25 cm.

Mimusops elengi (Maulsri) of plants height 180-195 cm well developed with thick stem in big in big size HDPE bags.

Nauclea cadamba (Kadam) of plants height 150-165 cm in big poly bags of plants size 25 cm.

Plumeria alba dwarf of plants height 90-105 cm with 3-4 branches and thick stem in big size HDPE bags.

Plumeria alba height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bag

Plumeria rubra of plants height 120-150 cm with 3-4 branches and thick stem in big size HDPE bags.

Pterospermum acerifolium (Kanak Champa) of plants height 150-165 cm. in big poly bags of plants size 25 cm.

Randia uliginosa of plants height 105-120 cm in big poly bags of plants size 25 cm.

Schleichera trijuga (Kusum) height 150-165 cm. in big poly bag size 25 cm

Shore robusta (Sal of plants height 150-165 cm in big poly bags of plants size 25 cm.

Spathodea campanulata of plants height 150-165 cm in big poly bags of plants size 25 cm.

Supply and stacking of plant Bauhinia tomentosa (yellow) of height 60-75cm. In earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Caesalpinia pulcherrima species of height 45-60cm. In earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Calliandra hybrida of height 105-120cm. Well branched, bushy in big size HDPE bag as per direction of the officer-in-charge

Supply and stacking of plant Cassia biflora of height 60-75cm. With 4-5 branches in poly bags of size 25cm as per direction of the officer-in-charge

Supply and stacking of plant Cassia laevigata of height 45-60cm. In earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Cestrum noctumum(Raat ki Rani) of height 60-75cm. With 4-5 branches in bag of size 25cm as per direction of the officer-in-charge

Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 60-75cm. With 2-3 branches in earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Euphorbia pulcherrima (dark red double bracts) well branched of height 60-75cm. in earthen pots of size 25cm as per direction of the officer-in-charge

Supply and stacking of plant Ficus panda of height 90-105cm. With 10-12 branches and healthy foliage, well formed in cement pots of size 30cm as per direction of the officer-in-charge

Supply and stacking of plant Gardenia jasminoides of height 45-60cm. With 3-4 branches in earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Hamelia patens of height 90-105cm, bushy in big size HDPE bags as per direction of the officer-in-charge

Supply and stacking of plant Hibiscus rosasinensis of height 90-105cm, bushy in big size HDPE bags as per direction of the officer-in-charge

Supply and stacking of plant Hibiscus variegated of height 60-75cm, with 8-10 branches and healthy variegated foliage in cement pots of size 35cm as per direction of the officer-in-charge

Supply and stacking of plant Murraya exotica of height 45-60cm, in poly bags of size 15cm as per direction of the officer-in-charge

Supply and stacking of plant Mussaenda erythrophylla(Rosea) of height 60-75cm, multi branched in earthen pots of size 25cm as per direction of the officer-in-charge

Supply and stacking of plant Nyctanthes arbor-tristis(Hasingar) of height 90-105cm, in earthen pots of size 20cm as per direction of the officer-in-charge

Supply and stacking of plant Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm earthen pots/Plasticv Pot as per direction of the officer-in-charge

Providing and stacking of Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of plant Tabemaemontana coronaria (Chandni single) variegated of height 105-120cm, multibranched, bushy in big sized HDPE bag as per direction of the officer-in-charge

Supply and stacking of plant Tecoma gaudichaudi of height 90-105cm, busy in big size HDPE bag as per direction of the officer-in-charge

Supply and stacking of Bignonia venusta (Golden shower) plant of height 30 cm to 45 cm in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer - in - charge

Supply and stacking of Bougainvillea (vairety Butiana, Lady Mary Baring, Mahara, Moha, Scarlet Queen, Varigata, glabra Formosa, Peruviana Odissi, paretha, Subhra, thimma, Spectabilis L. N. Birla, Regulgens) plant of height 30cm. To 45cm. With 2-3 branches in 20 cm size of Earthen pots/Plastic pots & as per direction of the direction of the officer-in-charge.

Supply and stacking of Clerodendrum splendens plant of height 30cm to 45cm. in 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30cm.to 45cm. In 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Passiflora caerulea (Rakhi bel) plant of height 30cm to 45cm. in 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Petrea volubilis plant of height 30cm to 45cm. in 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Quisqualis indica plant of height 30cm to 45cm. in 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Vernonia elaegnifolia(curtain creeper) plant of height 30cm to 45cm. in 20 cm size of Earthen pots/ Plastic pots & as per direction of the officer-in-charge.

Internal & External Electrical Works Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group C

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

6 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 mm sweep

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

400 A,50KA,FPMCCB

630 A,50KA,FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

6 way , Double door

8 way , Double door

12 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Single door

8 way (4 + 24), Single door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductorcomplete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductorcomplete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Upto 35 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19mm)

2 X 10 sq. mm (19mm)

3 X 6 sq. mm (22mm)

3 X 25 sq. mm (25mm)

3½ X 95 sq. mm (45mm)

3½ X 185 sq. mm (57mm)

3½ X 300 sq. mm (70mm)

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

4 X 25 sq. mm (28mm)

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)

Two Loop Panel.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole and neutral

Triple pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole and neutral

Triple pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

630 A,50KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

630 A,50KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

200 A,36KA,FPMCCB

400 A,50KA,FPMCCB

630 A,50KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

400 A,50KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

630 A,50KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

200 A,36KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

200 A,36KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.

Provide & Fixing of IP 65 protected LED Post-Top-Light system with Die cast housing, poycarbonate diffuser, 30 - 60W, 220-240V, 50Hz (integrated Driver), LED lamps supplied with pre-wired cable of 1 mtr. Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (Integral with light fixture).system life of 25000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE compliance.

SUB-HEAD I - SANITARY FIXTURES

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe - 40 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Providing and fixing C.P. brass shower mixer.

SUB-HEAD II - WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with Clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

65 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, nicluding all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

62.5 mm nominal outer dia Pipes

75 mm nominal outer dia Pipes

100 mm nominal outer dia Pipes

150 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 373 : 150 mm dia

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

SUB-HEAD III - DRAINAGE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Couplers

Single tee with door

Single tee without door

75mm bend

110mm bend

160mm bend

Shoe (Plain)

75mm Shoe

110mm Shoe

160mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

150 mm diameter

200 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

300 mm diameter

450 mm diameter

600 mm diameter

Providing & Laying (to level or slopes) & jointing with rubber rings pre-cast reinforced socket & spigot concrete pipes Class NP2 confirming to IS-458-2003 suitable for rubber ring roll on joint of the following internal diameter as per specification complete. (Earthwork in trenches to be measured & paid for separately.

150 mm dia. R.C.C. pipe

200 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

300 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

600 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :

Extra for depth for manholes for every additional depth of 0.1 m or part thereof With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Size 90x80 cm -

Size 120x90 cm

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Providing and fixing square-mouth uPVC SWR gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

ODU - 60 HP

ODU - 54 HP

ODU - 52 HP

ODU - 50 HP

ODU - 48 HP

VRV/VRF BASED HI WALL

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

1.28 TR (424 CFM)

1.59 TR (530 CFM)

2 TR (671 CFM)

VRV/VRF BASED DUCTABLE

Supply, installation, testing and commissioning of VRV /VRF based ductable type, high static indoor unit (IDU) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete. including canvas connection.

4.55 TR (1624 CFM) HSP

5.48 TR (2047 CFM) HSP

6.36 TR (2295 CFM) HSP

8 TR (2825 CFM) HSP

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.

4 .5 TR CASSETTE UNIT

4 TR CASSETTE UNIT

3.18 TR CASSETTE UNIT

2.55 TR CASSETTE UNIT

2 TR CASSETTE UNIT

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm (24G) sheet

Thickness 0.80 mm (22G) sheet

Thickness 1.00 mm (20G) sheet

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control damperscomplete as required.

Supplying, fixing testing commissioning of supply air diffusers ofpowder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.

Fire damper

Actuator

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.

Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.

NON SCHEDULE ITEMS

Supply, drawing of XLPE insulated & sheathed cable of 1.1 kV grade with Copper/ Aluminium conductor of approved makeon wall / Cable Tray with GI Saddles ,making necessary connections including testing etc. as required

6 Sq.mm 2.0 core Armoured Aluminium. Cable

6 Sq.mm 3.0 core Armoured Aluminium. Cable

6 Sq.mm 3.0 core Unarmoured Aluminium. Cable

25 Sq.mm 3.0 core Armoured Aluminium. Cable

185 Sq.mm 3.0 core Armoured Aluminium. Cable

95.00 Sq.mm 3.5 core armoured Al. Cable

70.00 Sq.mm 3.5 core armoured Al. Cable

185.0 Sq.mm 3.5 core armoured Al. Cable

240.Sq.mm 3.5 core armoured Al. Cable

300.Sq.mm 3.5 core armoured Al. Cable

25.00 Sq.mm 4.0 core armoured Al. Cable

16.00 Sq.mm 4.0 core armoured Al. Cable

10.00 Sq.mm 4.0 core armoured Al. Cable

10.00 Sq.mm 4.0 core Unarmoured Al. Cable

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 100/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

NON SCHEDULE ITEMS

Director Residence Panel 1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 100/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Officeser's Residence Panel 1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 100/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING : COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

1250KVA Transformer Main LT Panel 2000 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

1000 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 2000/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING : COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Housing Class-3 Building Main Panel 1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 150/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Housing Class-4 Building Main Panel

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 150/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING : COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Hostel Block Main Panel 1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 150/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING : COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

1250KVA Transformer Main LT Panel 2000 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

1000 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 2000/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING : 1250 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Auditorium Block

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 400/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Admin Block Light & Power Panel

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 150/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Admin Block HVAC Panel

1250 A FP ACB 50 KA WITH MICROPROCESSOR BASED TRIP UNIT Ics=Icu = Icw for 1 sec OVERLOAD SETTINGS with adj. time delay , SHORT CIRCUIT SETTINGS with adj. time delay, INSTANTANEOUS, EARTH FAULT & NEUTRAL PROTECTION with adj. time delay, inbuilt LED indication for each type of fault, inbuilt electrical & mechanical anti pumping, soft rating plug, 100% neutral rating, UV release with delay. ACB shall conform to IEC 60947-2 having combined test sequence certificate and release shall conform to EMI/EMC standard.

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 1250/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

Admin Block UPS Panel

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 200/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

100KVA Utility Main LT Panel

1 No. Multifunction/Kwh Meter with all functions & communication Port.

3 Nos. CT's 200/5A accuracy Class-I, 15VA Burden

LED type, Three phase indication lights (R,Y,B), with MCB.

C. OUTGOING :

COST OF PANEL BOX MADE OUT OF I6/14SWG MS SHEET POWDER COATED 1P42 CLASS ENCLOSRE AS PER APPROVED DESIGN (CPRI APPROVED FEBRICATOR

1250 KVA 11/.433 KV T/F compact type containerized T/F unit with RMU with one VCB and two LBS with FRTU and FPI, 415 V 2000 Amps Air circuit Breaker as incomer, 5nos. 250-500 Amps MCCB's as outgoing along with separate DT meter compartment

400 KVA 11/.433 KV T/F compact type containerized T/F unit with RMU with one VCB and two LBS with FRTU and FPI, 415 V 630 Amps Moulded Case circuit Breaker as incomer, 5nos. 63-250 Amps MCCB's as outgoing along with separate DT meter compartment

100 KVA 11/.433 KV T/F compact type containerized T/F unit with RMU with one VCB and two LBS with FRTU and FPI, 415 V 200 Amps Moulded Case circuit Breaker as incomer, 5nos. 40-125 Amps MCCB's as outgoing along with separate DT meter compartment

Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i)Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set (To be supplied by DISCOMs), (iii)TT Block, (iv) 6mm Bakelite sheet on all sides, (V) 3/6 core copper cable for interconnections etc. as required.

Supply, Installation, Testing & Commissioning of CT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i)Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set (To be supplied by DISCOMs), (iii)TT Block, (iv) 6mm Bakelite sheet on all sides, (V) 3/6 core copper cable for interconnections etc. as required.

Construction of foundation for P.S.S in CC in the ratio 1:2:6 as per Actual size Provided By Vendor along with wire mesh fencing (3000mm High) & angle iron gate, booting channels for transformer placing etc properly finished/white washed.

DG SET & ACCESSORIES

Receiving, handling, assembling, installing of Silent DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start ,Batteries, Fuel tank ( with Stand) & piping , control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 2.0 mmCRCA sheet steel (structure) with side wall fabricated from 2.0 mm CRCA sheet & filled with 100mm thick glass wool(96Kg/m3) as per IS 8183 the doors of 100 mm thick and fabricated from 1.6mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0mm thick, canopy fixed with axial flow fan of Alstom, CG, Almonard make.

All doors/ opening are sealed with neoprene/EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 degree centigrade. All controls for operation of DG set are from outside the enclosure with DG control panel mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 db(A) at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity :

Radiator cooled and Turbo charged

625 KVA at 0.8 pf 415V 50Hz 3-Ø

200 KVA at 0.8 pf 415V 50Hz 3-Ø

125 KVA at 0.8 pf 415V 50Hz 3-Ø

HV CABLES & TERMINATION

Providing of XLPE insulated IS:7098/II/85 approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx120cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.

3 core 120 Sq.mm

3 core 240 Sq.mm

FAÇADE LIGHTING Providing and fixing of Sink Mixer with swivelling spout.

Providing and fixing of Sink tap.

Providing, laying, jointing and testing in position the following HPDE (PE-100) as per IS:4984. Pipes for water supply cut to required lengths making proper connections of required depths. Pipe to be laid below ground level in trenches upto required depth including excavation in all kind of soil (hard rock), dewatering, refilling, watering, ramming & removing the surplus excavated material and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification with minimum 150 mm thick all round compacted silver sand and providing thrust block. All work complete as per specification and satisfaction of the Project Manager.

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

62.5 mm nominal bore

80 mm nominal bore

100 mm nominal bore

150 mm nominal bore

Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 15 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. as per direction of Engineer-Incharge.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

Providing & fixing butterfly valve (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.

65 mm nominal bore

80 mm nominal bore

100 mm nominal bore

150 mm nominal bore

Providing and fixing in position of approved quality high pressure rated Gun Metal Float Valve with ball float and brass rods of required length suitable for test pressure of not less than 15 Kg/sqcm of the following sizes: 50 mm nominal bore

Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. 15 mm nominal bore

Providing and fixing in position GI vent with hot dip galvanised brass mosquito proof coupling and air filter including return bend, complete as required as per direction of Engineer-Incharge. 100mm dia

Providing &, testing & commissioning of dial type pressure gauge with pressure scale of 0 to 15 kg / sq.cm. Provision of isolation cock suitable for maximum pressure of 15 kg / sq.cm shall be included in cost.

Providing & fixing Cast Iron `Y' Strainer (screwed/ flanged) PN 10 with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as per direction of Engineer-Incharge. 150mm dia

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 150 mm dia nominal bore

Providing & fixing dual plate Cast Iron wafer type check valve tested to a pressure of 16 Kg/sqcm. Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as per direction of Engineer-Incharge.

100 mm nominal bore

150 mm nominal bore

Providing and fixing Heavy class header complete for pump suction / discharge manifold comprising of expansion bellows, flanges, unions, check nuts, tee elbow etc. including all flanged connections as per drawing / site requirement. Supports from wall, floor and ceiling etc. Including dead end flanged connection complete as required and as directed by Engineer-In-Charge.

100mm nominal bore

150mm nominal bore

Providing & fixing electronic type water level indicator & controller with LED panel mounted as required complete with probes & all control wiring etc.

Providing & fixing Nitrile Rubber thermal insulation on hot water pipesincluding all accessories complete as per specification. All joints shall be sealed with adhesive & cotton tape, shall be applied to give uniform appearance & finished with polyshield protective coating.

15 mm nominal bore

20 mm nominal bore

Providing, testing, fixing & commissioning of Electric water heater / geyser with required accessories like valves on various inlet & outlet line, heavy duty reinforced connector pipes for cold & hot water line, all support arrangements, access provisions, ladders, MS bracket with two coats of enamel paint, anchor fastners etc to place the units, making the entire water heating system workable.

Capacity 15 Litres

Capacity 25 Litres

Providing all materials, labour, T&P for laying/fixing of following dia uPVC pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge.

Providing, fixing, jointing and testing UPVC Multi Floor traps of self cleansing design with water seal not less than 50 mm., with or without vent, jointing with proper solvent, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. 100mm x 75mm.

Providing, fixing, jointing and testing UPVC Floor traps of self cleansing design with water seal not less than 50 mm., with or without vent, jointing with proper solvent, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. 100mm x 75mm.

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of equivalent make, as approved, (cockroach trap) including setting in floor with cement mortor to match with floor finish as per architect requirements

Providing and fixing, cowl, on ventilating pipes and verticals for soil, waste & rain water Pipes at top level / terrace level, as specified and required, etc. complete.

Providing and fixing clean out plug with suitable insert keys for opening, male threaded joint with socket for pipes

Providing and fixing cleaning eye on horizontalsoil & waste pipes, for med of 300 mm long GI pipe with one plain end pushed in to the collar of pipe and the other end with flange which in covered by neoprene rubber gasket and blank flange, complete with nuts, bolts etc to the satisfaction of and as direction of Engineer-In-Charge.

SUB-HEAD IV : WATER SUPPLY PUMPS Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries & accessories including base plate complete as required.

Flow rate : 5 LPS each Head : 35 Mts Required for : Filter Feed Pumps (1Working + 1Standby)

Hydro-pneumatic System - Supply, Installation, Testing And Commissioning Of Compact Self Contained Skid Mounted Hydropneumatic System As Follows:

a. Vertical, In-Line, Multisage, centrifugal pumps with SS-304 casing and impeller and SS-316 shaft, CI base & head TEFC motor (with mechanical seal)

(Vendor to submit performance curves and technical catalog of the proposed model for review & information)

b. External Pump mounted or wall mounted microprocessor PID controller and frequency inverter integrated in a single body or as separate components with pressure sensor transmitter minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocall through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equiped with dry running protection - Quantity : 1 No.

c. Complete (Skid mounted wall mounted / floor mounted) electrical control panel comprising of all accessories such as PLCs, pressure switches, pressure transducers, control wiring and any other necessary imports etc. (list to be provided by the vendor)

d. Precharged diaphram pressure vessel with food grade membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc complete.

e. Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete

f. Accessories like pressure gauge, MS base frame (Synthetic enamel painted over a coat of primer)

g. GI suction and delivery header with flanges for inlet connection, common outlet header with flanges for outlet connections as required, and inter connecting piping with flexible connections, eccentric type reducers etc. all necessary indigenous accessories as required to complete the installation.

Domestic hydropneumatic system as follows: No. of pumps 3 (2 Working + 1 Standby) Water Flow Rate 4.6 LPS Head 45 M RM 2900 Location: Plumbing & Fire Fighting Plant room

Flushing & Irrigation hydropneumatic system as follows: No. of pumps 4 (3 Working + 1 Standby) Water Flow Rate 6 LPS Head 50 M RM 2900 Location: Sewage Treatment Plant

Flow rate : 10 LPS (1 Working + 1 Standby) Head : 15 Mts Solid Handling : 10-12 MM Location : Plumbing Plant Room Purpose : Plant Room Drainage MOC : Cast Iron body

Supplying, installing, testing and commissioning of SS vertical centrifugal booster pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries & accessories including base plate complete as required.

Flow rate : 120 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Admin / Academic Block terrace

Flow rate : 70 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Auditorium terrace

Flow rate : 60 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Sport's complex terrace

Flow rate : 100 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Shopping complex terrace

Flow rate : 120 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Guest House terrace

Flow rate : 135 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Dining & Kitchen block terrace

Flow rate : 220 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Hostel terrace

Flow rate : 75 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Director's Residence terrace

Flow rate : 60 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Officer's Residence terrace

Flow rate : 90 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Class III housing terrace

Flow rate : 95 LPM each Head : 15 Mts Required for : Domestic Water Supply Terrace Booster Pumps (1Working + 1Standby) Location: Class IV housing terrace

SUB-HEAD - V - WATER TREATMENT PLANT

Supplying, Designing, Testing, Installation & Commissioning of following capacity of Water Treatment Plant comprising of pressure sand filter or dual media filter, Activated carbon filter, Softener, dosing system and other necessary accessories and equipments to bring the outflow water parameters in compliance with IS 10500, annunciation panel, level controllers, level indicators, and make the system good and as per Engineer-In-Charge.

Flow rate : 5 LPS Location : Plumbing Plant Room Purpose : Water Treatment

SUB-HEAD VI - SEWAGE TREATMENT PLANT

Supplying, construction, Designing, Testing, Installation & Commissioning of following capacity of Sewage Treatment Plant comprising of equalization tank, bar screen chamber, oil & grease chamber, tube settler tanks, MBBR tanks, treated water tanks, filtered water tanks, and other necessary tanks and equipments and pumps and filtration equipments, centrifuge, and other necessary accessories and equipments to bring the outflow water parameters within the acceptable limits of EIA authority and Flushing water supply to the Toilets / water closets and urinals, Irrigation of landscaped areas and soft water supply to air conditioning cooling towers, annunciation panel, level controllers, level indicators, and make the system good and as per Engineer-In-Charge. 150 KLD Sewage Treatment Plant

SUB-HEAD - VII - ELECTRICAL PANELS

Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels inclduing cabling, earthing, etc.

Water Supply Pumps, filter feed pumps, Borewell pumps, Hydro-pneumatic system, Dosing systems, and other pumps & equipments as necessary in Plumbing Plant room.

Water Supply Booster pumps on terrace for following buildings: a. Admin / Academic block b. Auditorium c. Sports Complex d. Shopping complex e. Dining block f. Class III housing g. Class IV housing h. Hostel Block i. Guest House j. Director's Residence k. Officer's Residence

Fire Booster pumps on terrace for following buildings: a. Admin / Academic block b. Auditorium c. Sports Complex d. Shopping complex e. Dining block f. Class III housing g. Class IV housing h. Hostel Block i. Guest House

SUB-HEAD VIII : FIRE FIGHTING

Supply, Installation, testing and commissioning of electric driven pressurisation terrace pump suitable for automatic operation and consisting of following: complete in all respect as required as per specifications. (a) Horizontal type, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. (b) Suitable HP SQ cage induction motor TEFC type suitable for operation of 415 volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. duly painted as required.

Flow Rate : 900 LPM Head : 40M head

Flow Rate : 450 LPM Head : 40M head

Supplying, testing, installation & commissioning of pressure switches for Hydrant, Sprinkler and Jockey Pumps, including necessary wiring upto control panel & other materials as required as per specifications.

Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI, short pieces, nipples, elbows, stainless steel 'U' tube & ball valve, etc as required as per specifications.

Providing & fixing Electronic type water level indicator & controller with LED panel mounted as required complete with probes & all control wiring etc.

Providing, laying, testing and comissioning of 'C' Class heavy duty MS Pipe conforming to IS:1239 / 3589 fittings like tees, elbows, flanges, tapers, compressed asbestos gaskets, nuts and bolts, etc. Fixing the pipe on wall / ceiling with suitable clamps painting with two or more coats of synthetic enamel paint of required shade complete as required as per specifications.

65mm dia

80mm dia

100mm dia

150mm dia

Supply, fixing, testing and commissioning of butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation) PN 16 with bronze / gunmetal seat duly ISI marked complete with rubber gasket, flanges, nuts, bolts, washers conforming to IS 13095, of following sizes as required as per specifications.

65mm dia

80mm dia

100mm dia

150mm dia

Providing & fixing CI dual plate check valve PN 16, including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required as per specifications.

65mm dia

80mm dia

100mm dia

150mm dia

Providing & fixing gun metal single headed fire hydrant landing valve with flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. CI wheel, GM (gun metal) coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS:5290 complete as required as per specifications.

Providing and fixing first aid hose reel full swinging type including cabinet with 30 m length x 20 mm dia reinforced PVC BS black /red hose& fitted with shut off nozzle of 6 mm dia as required as per specifications. The hose reel shall conform to IS requirements as per specifications.

Providing & fixing non-percolating rubber reinforced lined (RRL) fire hose pipe (as per IS : 636) of 63 mm dia and 15 meter length. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked brass male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire as required as per specifications. (Location : Internal fire hydrant)

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Providing and fixing 6 mm thick glass door (with frame made of M.S. sheet 2mm thickness) of size 2.1 m x 0.9 m with center opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All M.S. work to be in Red P.O. colour over appropriate primer as required as per specifications.

Supply and fixing air Cushion tank made of 450mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required as per specifications.

Supply, installation, testing and commissioning ISI marked (IS:940) portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications.

Supply, installation, testing and commissioning ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.

Supply, installation, testing and commissioning ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:1349-1993 as required as per specifications. 5 Kg Cap.

Supply, installation, testing and commissioning Mechanical Foam type Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and conforming to IS:910 as required as per specifications. 50 Litres (trolley mounted)

Supplying and installing fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom at approved location inscribed with letters “FIRE” in black and gold color including providing MS stand duly painted over a coat of primer as required as per specifications.

VRV/VRF System

Outdoor Units

NON VRF DUCTABLE UNTIS

Supply, installation, testing and commissioning of CONCEALED Duct type units with Scroll compressor with green Regrigerant R-410A/R-32/R-22. The unit should be complete with indoor & outdoor unit, condensing unit, controls, control panel, tubular type refrigerant, canvas connection remote control and drain piping. The refrigerant piping, control wiring should be based on the indoor unit and outdoor unit distance being 3 mtrs/Ckt along with 13 mm thk nitrile rubber insulation. The insulated drain piping should be of 25 mm dia. and distance 3 mtrs/unit. Indoor unit should be provided with thermostats and remote control. The installation should be complete with all the required accessories like the supports, clamps required to make the installation complete. The cost should also include Chasing in walls as well as all the supports needed to install the units at the higher level.

17 TR 6800 CFM

11 TR 4400 CFM

8.5 TR 3400 CFM

NON VRF SPLIT AC

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply complete with Refrigerants R410 A/R32 and copper condenser at position. specification no. AP-AC/SAC Compelete with Outdoor units

1 TR SPLIT AC/ HI WALL

1.5 TR SPLIT AC/ HI WALL

2 TR SPLIT AC/ HI WALL

2.5 TR SPLIT AC/ HI WALL

NON VRF CASSETTE AC

Supplying, installing, testing and commissioning Cassette type variable speed Inverter technology room Air conditioning unit having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply complete with Refrigerants R410 A/R32 and copper condenser at position. specification no. AP-AC/SAC. Complete with Outdoor unit.

4 TR Four Way Casstte

3TR Four Way Casstte

AHU DX TYPE

SITC of Double Skin,Ceiling suspended air handling unit 25 mm thick PUF panel,4/6 Row Deep , D-X coil, 20 TR Capacity Coil, 8000 cfm airflow, with canvas connection, 25 mm thick Pre-Filter. with AHU connection kit.

Exhaust Fans - Axial Flow Type :

( Fire rated : 250 deg for 2 Hrs. )

Providing, fixing, testing and commissioning of AMCA Certified (For Air and Sound Performance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-2 type) confirming to IS - 325-IP - 55 with class `H' insulation. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan shall be EN 12101-3 Certified & CE/UL Listed for high temprature. Fan efficiency should not be less than 70 %, noise level should not be more than 80 db @ 3 m distance when measured in hemisperical reverberant room conditions for Normal mode Fans and noise level should not be more than 90 db @ 3 m distance when measured in hemisperical reverberant room conditions for Emergency mode Fans. Fans should be as per specification and drawings.

Motor make shall be same as mentioned on the fire certificate.

18000 CFM 15/20 ESP

8000 CFM 15/20 ESP

Floor Mounted Air Scrubber Units

Modular Double skin Floor mounted air scrubber units made of 23+2mm thick PUF insulated panels extruded aluminum hollow profiles with 0.8mm thick pre-coated GI Outer Sheet & 0.8mm thick Plain GI (270gsm) inner sheet comprising of Intake section for duct connection, Al Wiremesh filter section, Wet section made of 18g SS Tank, Three Phase Pump (1w+1s), GI internal piping, Double Bank Spray Nozzles and 4bend PVC eliminators. Blower section with DIDW Aerofoil/ Backward/ Forward curved fans, drive set with V- belts, Spring type vibration isolators, wire guard on Fan section access door, fire retardant canvass connection at fan outlet, IE-2 motor (TEFC type & suitable for VFD operation) & LED lamps for blower section, limit switch for the fan section access door with a view port and damper at the outlet of unit. All dampers shall be low leakage aluminum aerofoil design and suitable for manual / motorised operation. Units exposed to open sky shall have weather proof canopy. The End Plates/Casing/blank offs of Eliminators shall also be made of SS.

4000 CFM , 65mm of wg Total St. Pressure

6000 CFM , 65mm of wg Total St. Pressure

20000CFM , 75mm of wg Total St. Pressure

Floor Mounted Air Washer Units

Modular Double skin Floor mounted air washer units made of 23+2mm thick PUF insulated panels extruded aluminum hollow profiles with 0.8mm thick pre-coated GI Outer Sheet & 0.8mm thick Plain GI (270gsm) inner sheet comprising of Al Wiremesh filter section, Wet section made of 18g SS Tank, Single Phase Pump (1w+1s), PVC internal piping, Distribution system, 200mm deep Cellulose Pads & 2 bend PVC eliminators. Blower section with DIDW Aerofoil/ Backward/ Forward curved fans, drive set with V- belts, Spring type vibration isolators, wire guard on Fan section access door, fire retardant canvass connection at fan outlet, IE-2 motor (TEFC type & suitable for VFD operation) & LED lamps for blower section, limit switch for the fan section access door with a view port and damper at the outlet of unit. All dampers shall be low leakage aluminum aerofoil design and suitable for manual / motorised operation. Units exposed to open sky shall have weather proof canopy. The End Plates/Casing/blank offs of Pads & Eliminators shall also be made of SS.

3000 CFM , 50mm of wg Total St. Pressure

5000 CFM , 65mm of wg Total St. Pressure

16000CFM , 75mm of wg Total St. Pressure

SITC of Centralized Controller

Commission of VRV systems including topping R410A gas per site requirements

Gas charging

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

41.3 mm O.D. (insulation : 19 mm) Tube thickness 1.62mm

34.9 mm O.D. (insulation : 19 mm) Tube thickness 1.62mm

28.6 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

25.4 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

22.2 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

19.1 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

15.9 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

12.7 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

9.5 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

6.4 mm O.D. (insulation : 19 mm) Tube thickness 1.2mm

Refnet Joints/Branch Distributors for Indoor & Outdoor units.

1 No Each for suction line , 1 no each for liquid line ( = 1 set )

Providing and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation.

25 mm dia

32 mm dia

50 mm dia

Control & Transmission Wiring

Providing & fixing control cum transmission wiring of 2 corex1 sqmm copper in suitable conduits between indoor and outdoor units.

Outdoor Stand With Vibration Isolater V.I. Pad for VRV Outdoor Units.

Supply, installation, testing and commissioning of Exhasut/Fresh Air Inline fans. Fan efficiency should not be less than 70 %, noise level should not be more than 60 db @ 1 m. complete with canvas connection.

Supply, installation, testing and commissioning of Ceiling Mounted Exhasut Air fans. Suitable to Connected with duct from discharge side. inbuilt differs/grill at suction side. Fan efficiency should not be less than 70 %, noise level should not be more than 55 db @ 1 m. complete with canvas connection & NRV Damper.

Supply, installation, testing and balancing of inlet/Outlet air louvers with bird screen and volume damper for fresh/Exhaust air as per approved drawings and specifications.

Supply, installation, testing and balancing of Canvas Conncetion for Ductable units & Axial Fans.

DUCTING, GRILLS, DIFFUSER AND INSULATION

40 mm Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Extra for Flaming

Providing & laying 30mm thk pre-polished granite for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). All colours

Providing and fixing 40 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite for coping seats and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Vitrified Tiles 600 X 1200

Providing and fixing porcelain tiles on finished plain wall surface of size 73 mm x 73 mm x 6 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing & fixing 32mm dia M.S dowel bars with 1.25mm thick grade flexible PVC sleeves in one side for free movement and fixed in concrete road as directed by the Engineer-in-charge

Providing and laying in position polysulphides sealant for expansion joints , construction joints,of size 10X10mm grooves, etc. of Pidilite industries Ltd. Including surface preparation, applying primer, sealant for expansion joints etc.

Providing and laying Separation Membrane of impermeable plastic sheeting HDPE 125 micron thick as per required specification

Providing and laying factory made chamfered edge Cement Concrete shot blasted paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

60mm thick cement concrete Dark Grey Shot Blasted paver block of M-35 grade with approved colour, design & pattern.

60mm thick cement concrete Light Grey Shot Blasted paver block of M-35 grade with approved colour, design & pattern.

Special Architecture Roofing Designing ,Providing, fabricating, assembling and erection of Pre stressed Special Architectural structure Roofing structure with M.s.Tubular Frame Work (As per Is Steel ) in desired profile as per conceptual drawing , With Type II precontraint as per manufacturing and supplying standards by Serge Ferrari Or Similar Precontrant if Serge Ferrari Not available . The membrane should confirm to the manufacturing standard of being pre stretched in both weft and waft direction during manufacturing to perform best dynamic stability in both weft and waft direction with Approved Installers for Specific Project and Manufacturer for Architectural Roofing, (Construction Catalysers/AnconIndia/Grorich Horivert.) The fabric must be of HT polyester yarns 1100 Dtex coated with uniform 230 micron PVC coating over the polyester yarn. The top quote over the PVC must be of high concentration with easy clean ability and superior white pigmentation of the membrane.

Providing & Laying 7 layer Acrylic system (Base layer: Acrylic Primer 367-28 ,an acrylic latex based emulsion for application onto new or existing asphalt or concrete surface /Layer 2 : Acrylic Resurfacer 367-30 for filling the surface chips, voids and conceals repairs while providing a smooth surface for color coating / Layer 3 & 4 : Liquid Rubber / Layer 5 & 6 : Precoat 367-200 , Layer 7 : quartz filled acrylic latex based textured tennis topcoat)

Providing & fixing Poles and net for tennis courts all inclusive

4 Line in : 60 intercom connections Extendable to 120 intercom connection 1. Capacity: 4 Main Lines (Trunk Line/ P and T) and 60 Extension 2. Internal/External Music on Holding, Operator/Autoattendant Mode, Remote Programming 3. Day/Night Mode (Manual), Music and Ringing Recordable OGM (outgoing message), Music Duration 20 Seconds 4. Caller ID, Call Transfer, Call Forwarding Manually, Outgoing Call Transfer, Power Failure Transfer, Specific Main Line (CO/Trunk Line) Dialing, Three Way Conference, Do Not Disturb, Auto/Manual Dial-Out Mode 5. Type: Digital, Analog 6. Temperature Range : 0-50 7. Operating Humidity: 0-95%, Non Condensing

3 Line in : 16 intercom connections Extendable to 60 intercom connection 1. Capacity: 3Main Lines (Trunk Line/ P and T) and 16 Extension 2. Internal/External Music on Holding, Operator/Autoattendant Mode, Remote Programming 3. Day/Night Mode (Manual), Music and Ringing Recordable OGM (outgoing message), Music Duration 20 Seconds 4. Caller ID, Call Transfer, Call Forwarding Manually, Outgoing Call Transfer, Power Failure Transfer, Specific Main Line (CO/Trunk Line) Dialing, Three Way Conference, Do Not Disturb, Auto/Manual Dial-Out Mode 5. Type: Digital, Analog 6. Temperature Range : 0-50 7. Operating Humidity: 0-95%, Non Condensing

Supply , Drawing and Testing of outdoor singlemode [ 9 micron ] glass Fiber Optic cable as per latest ammendments of TIA /EIA 568B.3 , GR 409 CORE / UL listed NEC 770 Standards in existing MS/PVC Conduits/ slotted channels with ferruling at both ends for identification.

6 fiber

Supply , Installation, OTDR Testing & Fusion Splicing of Fiber singlemode Pigtail [ 9 micron ] glass Fiber Optic Cable as per latest ammendments of TIA /EIA 568B.3 , GR 20 CORE / UEC 794-1/ EN 187000 Standard Specifications including ST II / SC/LC/MT-RJ/PC connector as per requirements.

Supply ,Installation and Testing of indoor 1 pair singlemode [ 9 micron ] glass Fiber Optic Patch Cords of three mtr length as per latest ammendments of TIA /EIA 568B.3 and IEC 794 Standard Specifications including ST II / SC/LC/MT-RJ/PC connectors at both ends as per requirements.

SITC of ethernet media converter

Supply & installation of4 way / 8 way splitters for cable TV system including making connections with cable sockets, soldering, Supply and fixing of MS backbox of required size complete with fixing flush in wall with white polycarbonate cover etc. complete as required

Supply & laying of RG-6 cable for TV in existing conduit/ raceway complete as required.

Supply of Information outlets along with Face Plate for Flush Mount on 2 Module box made of high impact plastic body ABS FR grade with spring loaded collapsible shutters in jack recess suitable for Cat 6 application with terminator caps for tooless termination .

Single Outlet

SITC of 10/100 MBPS Unmanaged Switch

Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessary connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps.

24 Ports

Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable .

6U(44 mm ) wall mounted

9U(44 mm ) wall mounted

Supply , Installation, Testing and Comissioning of Floor Standing Communication rack with width 600 MM, Depth 600 MM, front glass door, rear MS door, side openable panels, min 10 socket Vertical Cable manager -01 no, two nos Vertical Cable managers, 05 nos Horizontal Cable managers, swing handles, lock on both doors, Top and Bottom Cable entries with gland plates, Coastor with brakes, 1 no Fan tray with 2 x 230 Volt fans, Equipment mounting hardware.

27 U Floor Standing Rack

CCTV NETWORK 2 Megapixel Fixed Lens Camera IR Dome Type: 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8mm Fixed lens, 0.028 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, IK10, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, video tampering, UL, CE, FCC certified.

2 Megapixel Fixed Lens Camera IR Bullet Type: 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S, PROFILE G), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 128 GB (SD card not included), IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified.

NVR 32 Channel: Connect Up to 32 IP Cameras, Dual OS, Up to 8 Megapixels Resolution, HDMI output with 4k output and VGA output with 2MP Output , Support H.265,H.264, MJPEG, Incoming Bandwidth 256 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 6TB, 2 USB at least 1 × USB with 3.0, Serial interface:1 RS-485, 1 RS-232, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.

NVR 16 Channel: Connect Up to 16 IP Cameras, Dual OS, Up to 8 Megapixels Resolution, HDMI output with 4k output and VGA output with 2MP Output , Support H.265,H.264, MJPEG, Incoming Bandwidth 160 Mbps, 4 SATA Hard Disks, ANR Technology, 2 SATA interfaces for 2 HDDs and capacity of each HDD upto 6TB, 2 USB at least 1 × USB with 3.0, Serial interface:1 RS-485, 1 RS-232, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.

NVR 8 Channel: Connect Up to 8 IP Cameras, Dual OS, Up to 8 Megapixels Resolution, HDMI output with 4k output and VGA output with 2MP Output , Support H.265,H.264, MJPEG, Incoming Bandwidth 80 Mbps, 2 SATA Hard Disks, ANR Technology,1 SATA interfaces for 1 HDDs and capacity of each HDD upto 6TB, 2 USB at least 1 × USB with 3.0, Alarm I/O 4/1, 1 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.

24 Port Network Switch Gigabit POE: 24 × Gigabit PoE ports, 1 × Gigabit RJ45 port, and 1 × Gigabit SFP fiber optical port, IEEE 802.3at/af standard.

16 Port Network Switch Gigabit POE: 16 × gigabit PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit SFP fiber optical port, IEEE 802.3at/af standard

8 Port Network Switch Gigabit POE: 8 × Gigabit PoE ports, 1 × Gigabit RJ45 port, and 1 × Gigabit SFP fiber optical port, IEEE 802.3at/af standard.

Supply of connector

Supply of Hard Disc 4 TB

Supply of high resolution led monitor 32" complete as required.

Installation Charges

Supply and laying of HDMI Cable

Provide of IP20 LED batten type light fixture made from CRCA sheet steel housing suitable for moutning LED tube system (integral driver), Power Consumption of 18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K & 6000°K..

Provide of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of ≤ 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000°K , 4000°K & 6000°K. Fixture shall be CE compliance.

Provide of Aesthetically Designed linear LED mirror light with a high output PMMA Diffuser for glare free output including making connection testing etc. as required Dimension-300mm

Provide of energy efficient / energy saving direct fit (Retrofit) LED Bulb . 12 Watt LED LAMPS

Provide of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm Sweep 9 900 RPM)

Provide of 3.0 mm PVC sheet for fan box with the help of screws, cup washer as required.

Provide of double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. 1200 mm sweep

Provide & Fixing of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. 300 mm sweep( oscillating type)

SITC putting in to operation and final testing of automatic lift complete in the shaft well and pit constructed already as per CPWD specification including automatic rescue devices (ARD), all standard equipment, accessories and control equipment as per manufacturer’s design and as per CPWD specification (Part-III LIFTS) on the turnkey basis , confirming to NBC / statutory norms and fulfilling following requirements .

Type: Passengers Lift

Load: As specified elsewhere from 4 passengers (272 Kg) to 16 passengers (1088Kg.) (for each person standard weight 68Kg)

Speed: 1.00 Mtr/sec.

Control: ACV3F, 32bit Microprocessor integrated serial communication control system with RMS (Remote monitoring system) / BMS (Building monitoring system) supporting software

Motor/Machine : Permanent magnetic synchronous gearless motor.

Total rise : About 3 mtrs. (Approx) two stops only.

Landings : All floors on same side.

Floors served : G+1

Signals : Digital car position indicator, car travel direction indicator inside car & at all landings, Voice annunciator with suitable music shall be provide in the lift car.

Shaft size : As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately

Guide rail : As per manufacturer's specification

Lift & Car Size : As per manufacturer's design and as per CPWD specification (Part-III LIFTS)

Car Enterence: As per manufacturer's design and as per CPWD specification (Part-III LIFTS)

Landing Enterence: As per manufacturer's design and as per CPWD specification (Part-III LIFTS)

Car Door: S.S. (Stainless steel) hairline finish centre / Telescopic opening door with vision panel.

Landing door : S.S. (Stainless steel) Hairline finish centre / Telescopic opening door with vision panel.

Door operation : Automatic electric power operated door, Full height infra red curtain with multiple criss/cross light beams.

Car interior : S.S. (Stainless steel) panel with hair line finish.on all sides.

Car floor : Anti skid PVC flooring on heavy duty M S (Mild Steel) platform.

Car ceiling & lighting : S. S. (Stainless steel) finishes with aesthetic appearance with LED ceiling lights

Car ventilation : Pressure fan / Blower fan (Car fan with automatic sleep timer shall be provided).

Emergency lighting in car : Battery operated emergency lighting in the lift car.

Intercom system : Battery operated Intercom system in lift car, machine room and ground floor/control room.

Emergency alarm : Battery operated alarm bell system in lift car & control room/ Ground floor.

Position of machine room : Directly above the hoist-way.

Electric power supply: AC 415 V, 3 phase 50 Hz & AC 230 V 1phase 50Hz terminated in machine room.

Fire man switch : Fire man switch at machine room / Terminal landing

All car panel buttons and all floor switches must be with brail language as per lift act.

Audio visual indication in the lift car showing overloading shall be provided such that doors kept open till excess load is removed.

Spring buffer/Hydraulic buffers shall be provided

Mechanical over speed governor, door key holes in the floor doors shall be provided.

Lift machine hoisting arrangement in the lilt machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc..

In the hoist way fascia plate shall be provided.

Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made available by the department in lift shaft, machine room or at desired level.

Car top safety barricade shall be provided.

ARD (Automatic rescue device) : Solid state inbuilt automatic rescue device (ARD) for automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure capable to move the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure.

Passenger capacity:-

(v) 13 Passenger (884Kg.)

(vi) 16 Passenger (1088Kg.)

Providing and Fixing Armstrong Channeled Woodworks perforated panels G-13 of width 192mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a Moisture Resistant fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade & finish (Portland Maple, Sea Beach, Siam Wood, Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 13mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.60. The panels shall be mounted on special aluminium splines (keel) using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.

INSTALLATION: Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.

Supply and fixing Wooden acoustic fire door frame for Single /Double leaf to required sizes of approved make & certified Manufacturer Navair International or approved equivalent of The frame should be Single rebate profile of size 140 x 90 mm made out of Hardwood Mirandi with intumescent seal of size 20x4mm on all the three side. Frames shall be Butt jointed and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be fixed by HRD fasteners for installation on a finished plastered masonry wall opening fixed in existing opening with the help of anchor fastener of appropriate size as per direction of Engineer in Charge. The manufacturer should be an ISO certified and IGBC registered member. The approved manufacturer are Navair or equivalent as per the directions of Engineer-in-charge

Providing and fixing wooden Acoustic fire Door leaf 77 mm thick with commercial ply & laminate both side without vision lite. shutter comprising of 2 non -combustible boards sandwiching 41 mm thick fire resistant & accoustic insulation filler. The shutter is faced with 6mm thick commercial ply and 1mm thick Laminate (Laminate is payable extra) on both faces and Hard wooden lipping all around the shutter. The frame shall be fitted with fire & smoke intumescent seal of size 20 x 4mm on all the three sides except bottom and shutter shall be fitted with fire & smoke intumescent seal of size 20 x 4mm on all the three sides except bottom. The door shall have suitable arrangement only for the provision for Accoustic seals for sound reduction properties.

Supply & fixing of SS Ball Bearing Hinges of size 100 x 89x 3mm complete with SS Screws of Becker Fire Solution /GEZE Make ( 4 Nos. per panel ) as per the directions of Engineer-in-charge

Supply & fixing of Mortise Dead Lock Becker Fire Solution / Geze Make. as per the directions of Engineer-in-charge

Supply & fixing of SS D Type Pull Handle of size 300mm Long of Becker Fire Solution / Geze Make. as per the directions of Engineer-in-charge

Supply & fixing of door closers of BLC-604 Becker Fire Solution / TS2000V GEZE Make. as per the directions of Engineer-in-charge

Supply & fixing of TOWER bolt 600mm Becker Fire Solution / GEZE Make. as per the directions of Engineer-in-charge

Supply & fixing of anchor fasteners of HILTI/ FISHER/ Equivalent of maximum 120mm length. as per the directions

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Perla OP Microlook 90 Edge Tiles with Armstrong Silhouette 15mm Exposed Grid or equivalent The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9, CAC = 26 dB, Light Reflectance ≥85%, Thermal Conductivity k = 0.036 w/m K, Colour White, Fire Performance Euroclass A2-S1, d0, & ISO 5 in accordance to ISO 14644-1 (Zone 4 in accordance to NF S 90-351) in module size of 600 x 600 x 15mm with laminated scrim on the face of the tile, suitable for Green Building application, with Recycled content of 43%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 9.5 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have metered ends & “birdsmouth” notches to provide metered cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2.

INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 300mm centre to form 1200 x 300 mm module. Cut cross tees longer than 600mm require independent support. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. ARMSTRONG SUSPENSION SYSTEM - Armstrong make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire assembly.

6mm thick commercial ply conforming to IS: 303 BWR grade

Supply & fixing of door closers of UL listed Heavy duty std arm with silver body finish and tested in accordance of EN 1634 - 3 and for mechanical test to EN 1154 for 50000 cycles and shall be tested with the fire doors for 2 hrs. fire rating from the CBRI Roorkee as per the directions of Engineer-in-charge

Supply & fixing of Fire rated SS D Type Pull Handle of size 300mm Long as per the directions of Engineer-in-charge.

Providing and fixing aluminium die cast body TS 68 door closer with standard arm (EN2/3/4 or equivalent fixed with necessary accessories and SS screws etc complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade 271 Sash lock with EPC 60mm Both side key 51200021, 68000055 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Tower Bolt Size - 10", SAP code 9117718 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade DB002/2/6- Tower Bolt Size 6 SAP code 9117696 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture TGDID 300 x 22 S, Satin SS 304 code- 9125491 with dead lock set 706 Dead Lock Type 2 Package - 60mm one side key and thum turn or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Door Stopper SAP code 9113319 or equivalent - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with providing and fixing powder coated aluminum angles as per detail. The work should be carried out by the authorized installer of the Company in India. (Basic rate Rs. 234 per sqft)

Supply and installation of Athleta heterogeneous vinyl sheet flooring in sheet form by Armstrong World Industries, . The total thickness would be 4.5mm and thickness of wear layer would be 0.45mm. The product should be multi layered consisting of wear layer with PUR coating, PVC layer, fiber glass layer and foam layer. Athleta shall conform to shock absorption of ≥28%, ball bounce of 97%, sound insulation of 20-22dB, Impact resistance of ≥8N/m as per DIN 18032, abrasion resistance of 7mm, indentation resistance of 0.6mm as per EN1016, friction coefficient of 0.6 as per GB/T14833-1993, Rebound coefficient of 0.86 as per GB/T14833-1993 Installation- It is important to ensure the subfloor on which the sheet is being laid is smooth, flat, hard and free from moisture, grease etc. In case of uneven subfloor the same should be levelled using self leveling compound. IPS/Vitrified/ceramic/mosaic tiles do not provide zero leveled sub floor. The moisture present in the subfloor should be less than 8% before installation of the floor. The sheet should be installed as per recommended adhesive. The installation shall be undertaken as per manufacturers installation instructions. (Basic rate Rs. 160 per sqft)

Supply and Installation of Sport Court PowerGame Plus High-Impact Polypropylene Copolymer Modular Sports Floor System approved by FIBA, FIVB, IHF and ITF. Technical Specification: 36-point positive locking system, suspended, polypropylene, high-impact, sports surface manufactured from copolymer of proprietary formulation with supportive leg structure and positive locking system with mechanical Lateral Forgiveness. Basic Rate Rs. 335/- Per Sqft including aluminium edgeprofile Thickness - 1.59 cm Size of tile - 12” x 12” Weight should be more than 331g/tile Heat Deflection @ 66psi (ASTM D 648): 82°C Tensile Yield Strength (ASTM D 638): 2900psi. Limited Warranty: 15 Years

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing of TOTEM, using aluminium extrusion alloy 6060 as per international standards tensile strength 190MPa typical BHN 70 from aluminium alloy homogeneous billet with premium annodizing finish 20 microns ISO 9001-2208 certified stating name of building on both sides,made of aluminium duly multiple coated with Polyurethane of approved make and shade, aluminium extrusions bented and supported by thermoformed plastic components to hold the curve , the thermoformed plastic components to be fixed on casted and spinning aluminium rails with clip on arrangement and forming supports, as per the approved product design of model: Mars, manufactured by Claudeneons,sign supply or equivalent.

Size = 4ft x 16ft

Size = 5ft x 4ft x 7ft

Providing and fixing Signage with made using 25mm aluminium extrusion of 6060 grade alloy as per European Standards EN 755-2-2008 with tensile strength of 190MPa and typical BHN is 70 using virgin aluminium homogeneous billet. An ISO9001-2008 product with premium grade 20 micron anodising. Profiles are extruded following international standards with life time warranty under normal working conditions. Chemical: EN 573-3-2009 Dimension Tolerance: 755-2-2008 Mechanical: 755-9-2008 25mm base space available for fixing Size = 5ft x 2ft

Providing and fixing of signages, curved frame technology using aluminium extrusion alloy 6060 as per international standards tensile strength 190MPa typical BHN 70 from aluminium alloy homogeneous billet with premium annodizing finish 20 microns ISO 9001-2208 certified of various widths and lengths, to form suggested usages ,made of aluminium extruded sections ,the thermoformed plastic components to be fixed on casted and spinning aluminium rails with snap fit and thermoformed clips on arrangement and forming supports duly anodised ,all signages shall be provided with lexan 9030 protecting film over the prints, of appropriate size, Model :Galaxy by Claudeneons,sign supply or Equivalent.

1-Door Plates = (Size = 455 x 93 x 10)

2-Toilet Signs = (Size = 156 x 156 x 10)

3-passage Sign = (Size = 490 x 125 x 22)

4-projected Sign = (Size = 156 x 156 x 22)

5- Table Signs = (Size = 275 x 62 x 45)

4-projected Sign = (Size = 156 x 156 x 22)

7 Fire Extinguisher = (Szie = 187 x 187 x 10)

8- Emergency Exit sign = (Size = 310 x 245 x 60)

6- Lift Sign = (Size = 490 x 187 x 10)

2-Toilet Signs = (Size = 156 x 156 x 10)

5- Table Signs = (Size = 275 x 62 x 45)

8- Emergency Exit sign = (Size = 310 x 245 x 60)

1-Door Plates = (Size = 455 x 93 x 10)

1-Door Plates = (Size = 455 x 93 x 10)

2-Toilet Signs = (Szie = 156 x 156 x 10)

6- Lift Sign = (Size = 490 x 187 x 10)

1-Door Plates = (Size = 455 x 93 x 10)

6- Lift Sign = (Size = 490 x 187 x 10)

4-projected Sign = (Size = 156 x 156 x 22)

Furniture WAITING SOFA (3 SEATER) Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (3 SEATER) Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (3 SEATER) Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (2 SEATER) Two seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA ( SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (3 SEATER) Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (3 SEATER) Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA (SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

WAITING SOFA ( SINGLE SEATER) single seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. Size – 2400x600X750HT mm SIDE Size – 1200x400X750HT mm

Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. Size – 3730x1200X750HT mm SIDE Size – 1200x400X750HT mm

OFFICE TABLE WITH SIDE UNIT MADE IN PRE LAMINATED PARTICLE BOARD TOP WILL CONSIST OF 25 MM THICK TABLE TOP WITH GABLE LEG, FULL HT MODESTY AND WIRE MANGER HOLE. SIDE UNIT HAVING DRAWERS. TABLE SIZE- 2400W X 800D X 750HT AND SIDE UNIT SIZE- 1200W X 600D X 750HT

Cabin Office Table WITH BACK UNIT Exective Office Table with side cabinet & drawer unit Size – 2400x800X750HT mm

Office Table with Side Cabinet & back cabinet. Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. Size – 2440x900X750HT mm SIDE Size – 1200x400X750HT mm

TABLE WITH PEDESTAL Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. SIZE- 1800W X 900D X 750HT PEDESTAL SIZE- 450WX450DX750HT

Exective Office Table with side cabinet & drawer unit Size – 2400x900X750HT mm Size – 900x400X750HT mm

Cabin Office Table WITH BACK UNIT Exective Office Table with side cabinet & drawer unit Size – 2400x800X750HT mm

Office Table with Side Cabinet & back cabinet. Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. Size – 2400x900X750HT mm SIDE Size – 1200x400X750HT mm

Office Table made of prelam particle board with pvc edge bending, Table top 25 mm thick, modesty penal 18 mm thick and gable end 25 mm thick prelam. Side Credenza – Made of 18 mm thick made of prelam particle board with pvc edge bending. Size – 2800x900X750HT mm Size – 900x400X750HT mm

CENTER TABLE Glass Table top, chrome pleate pipe frame (SIZE- 800W X 750D X 450HT)

CENTER TABLE Glass Table top, chrome pleate pipe frame SIZE- 1000W X 600D X 450HT

CENTER TABLE (SIZE- 1400W X 900D X 450HT)

CENTER TABLE SIZE- 1400W X 900D X 450HT

CENTER TABLE SIZE- 1500W X 900D X 450HT

CENTER TABLE SIZE- 1000W X 600D X 450HT

CENTER TABLE SIZE- 1500W X 900D X 450HT

Center Table Glass Table top, chrome pleate pipe frame Size – 600x600 mm

CENTER TABLE SIZE- 1000W X 600D X 450HT

CENTER TABLE Glass Table top, chrome pleate pipe frame SIZE- 1500W X 1000D X 450HT

CENTER TABLE Glass Table top, chrome pleate pipe frame SIZE- 1500W X 1000D X 450HT

Center Table Glass Table top, chrome pleate pipe frame Size – 1200x600 mm

CENTER TABLE Glass Table top, chrome pleate pipe frame (SIZE- 1200W X 600D X 450HT)

SIDE TABLE Glass Table top, chrome pleate pipe frame (SIZE- 550W X 550D X 450HT)

SIDE TABLE Glass Table top, chrome pleate pipe frame SIZE- 600W X 600D X 450HT

SIDE TABLE Glass Table top, chrome pleate pipe frame SIZE- 500W X 500D X 450HT

SIDE TABLE (SIZE- 450W X 450D X 450HT)

SIDE TABLE (SIZE- 450W X 450D X 450HT)

SIDE TABLE Glass Table top, chrome pleate pipe frame (SIZE- 450W X 450D X 450HT)

SIDE TABLE SIZE- 450W X 450D X 450HT

SIDE TABLE Glass Table top, chrome pleate pipe frame SIZE- 600W X 600D X 450HT

SIDE TABLE SIZE- 600W X 600D X 450HT

SIDE TABLE Glass Table top, chrome pleate pipe frame SIZE- 500W X 500D X 450HT

Side Table Glass Table top, chrome pleate pipe frame Size – 600x600 mm

Side Table Glass Table top, chrome pleate pipe frame SIZE- 500W X 500D X 450HT

SIDE TABLE Glass Table top, chrome pleate pipe frame (SIZE- 450W X 450D X 450HT)

Glass Table top, chrome pleate pipe frame Size – 600x600 mm

DINING CHAIR (PP seat and back )

DINING CHAIR(8SEATER) Dinnig Table with 08 chairs

DINING CHAIR(10 SEATER) Dinnig Table with 10 chairs

DINING CONSOLE 25 mm thick prlam particle table top with pvc edge bending and black powder coated pipe frame.

KING SIZE BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) (Size (W x D) : 2000 mm x 1800 mm)

KING SIZE BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) (Size (W x D) : 2050 mm x 1830 mm)

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size (W x D) : 400 mm x 450 mm)

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size (W x D) : 400 mm x 450 mm)

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. Size (W x D) : 400 mm x 450 mm

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. Size (W x D) : 600 mm x 450 mm

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. Size (W x D) : 400 mm x 450 mm

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size (W x D) : 1000 mm x 500 mm)

BED SIDE TABLES MADE IN 18 MM COMMERCIAL PLY WITH ALL SIDE LAMINATE FINISH HAVING PROVISION OF A DRAWER WITH SOFT CLOSE CHAANEL AND BASE OF LEG IN MS WITH PAINT FINISH USING ALL REQUIRE HARDWARE,FITTINGS ETC. Size (W x D) : 400 mm x 450 mm

MINI BAR STORAGE MADE IN 18 MM PRE LAMINATE PARTICAL BOARD WITH PROVISION OF A DRAWER & SHELVE WITH SOFT CLOSE CHAANEL USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 1500W mm x 630D mm X 2400HT mm)

MINI BAR STORAGE MADE IN 18 MM PRE LAMINATE PARTICAL BOARD WITH PROVISION OF A DRAWER & SHELVE WITH SOFT CLOSE CHAANEL USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 2300W mm x 600D mm X 900HT mm)

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE (Size - 1600W mm x 600D mm X 2400HT mm)

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE (Size - 1600W mm x 600D mm X 2400HT mm)

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2400W mm x 600D mm X 2400HT mm

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2340W mm x 600D mm X 2400HT mm

L- SHAPE WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2500X2270W mm x 600D mm X 2400HT mm

U- SHAPE WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2950X2500X1800W mm x 600D mm X 2400HT mm

U- SHAPE WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2280X2400X2280W mm x 600D mm X 2400HT mm

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 3970X2055W mm x 600D mm X 2400HT mm

L-SHAPE WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE Size - 2400X1300W mm x 600D mm X 2400HT mm Size - 1500W mm x 600D mm X 2400HT mm

WARDROBE STORAGE CARCASE MADE IN 18 MM COMMERCIAL PLY WITH INSIDE AND OUTSIDE IN LAMINATE FINISH AND SHUTTER IN MDF WITH BOTH SIDE PLAIN LAMINATE (Size - 2030W mm x 600D mm X 2400HT mm)

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES (Size - 2450W mm x 400D mm X 750HT mm)

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES (Size - 1900W mm x 400D mm X 750HT mm)

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES (Size - 1900W mm x 400D mm X 750HT mm)

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES Size - 2670W mm x 450D mm X 750HT mm

TV UNIT (LINING ROOM & BEDROOM) TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES Size - 1720W mm x 450D mm X 750HT mm

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES Size - 3000W mm x 450D mm X 750HT mm

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES Size - 1720W mm x 450D mm X 750HT mm

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES (Size - 2450W mm x 400D mm X 750HT mm)

TV UNIT MADE IN PRE LAMINATE PARTICLE BOARD WITH DRAWERS AND SHELVES (Size - 1900W mm x 400D mm X 750HT mm)

Modular Workstation (INLINE WORKSTATION ) 60 mm thick aluminum powder coated double raceway partition, above the worktop fabric pinup board and below the worktop laminate finish, Table top 25 mm thick prelam particle board with pvc edge bending, 25 mm thick gable end prelam. 3 drawer mobile prelam pedestal unit. Size – 1200x600X750HT mm

Modular Workstation (INLINE WORKSTATION ) 60 mm thick aluminum powder coated double raceway partition, above the worktop fabric pinup board and below the worktop laminate finish, Table top 25 mm thick prelam particle board with pvc edge bending, 25 mm thick gable end prelam. 3 drawer mobile prelam pedestal unit. Size – 1350x800X750HT mm

OVAL SHAPE TABLE 25 mm thick prlam particle table top with pvc edge bending and black powder coated pipe frame.

OVAL SHAPE TABLE - CHAIRS (PP seat and back )

OVAL SHAPE TABLE Size - 1700W mm x 850D mm X 750HT mm

Café Table 25 mm thick prelam particle table top and black powder coated pipe frame. Size – 900x900 mm

STUDY TABLE MADE IN PRE LAMINATE PARTICLE BOARD ON ALL ON METAL FRAME BASE AND ALL EXPOSED EDGES TO BE LIPED BY 2MM THK. PVC EDGE BAND WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 1920W mm x 600D mm )

STUDY TABLE MADE IN PRE LAMINATE PARTICLE BOARD ON ALL ON METAL FRAME BASE AND ALL EXPOSED EDGES TO BE LIPED BY 2MM THK. PVC EDGE BAND WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 1920W mm x 600D mm )

STUDY TABLE MADE IN PRE LAMINATE PARTICLE BOARD ON ALL ON METAL FRAME BASE AND ALL EXPOSED EDGES TO BE LIPED BY 2MM THK. PVC EDGE BAND WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 1920W mm x 600D mm )

STUDY TABLE MADE IN PRE LAMINATE PARTICLE BOARD ON ALL ON METAL FRAME BASE AND ALL EXPOSED EDGES TO BE LIPED BY 2MM THK. PVC EDGE BAND WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC. (Size - 1920W mm x 600D mm )

CLASS ROOM TABLE Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 3600x600X750HT mm

Cabin Office Chair High back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors.

High back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors.

Executive high back revolving chair with arms, cushioned seat and back, swivel tilt mechanism, class -4 gas lift and nylon base with castors.

High back chair Executive high back revolving chair with arms, cushioned seat and back, swivel tilt mechanism, class -4 gas lift and nylon base with castors.

High back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors.

LUGGAGE LEDGE MADE IN 18 MM COMMERCIAL PLY WITH LAMINATE FINISH ALL SIDE AND HANGING ROD AS/DRAWING (Size - 900W mm x 450D mm )

LUGGAGE LEDGE MADE IN 18 MM COMMERCIAL PLY WITH LAMINATE FINISH ALL SIDE AND HANGING ROD AS/DRAWING (Size - 900W mm x 450D mm )

LUGGAGE LEDGE MADE IN 18 MM COMMERCIAL PLY WITH LAMINATE FINISH ALL SIDE AND HANGING ROD AS/DRAWING (Size - 900W mm x 450D mm )

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) (Size (W x D) : 2000 mm x 1600 mm)

Square Meeting Table Glass Table top, chrome pleate pipe frame

Executive Medium back visitor chair with arms, Cushioned seat and back, black powder coated pipe frame.

Executive high back revolving chair with arms, cushioned seat and back, swivel tilt mechanism, class -4 gas lift and nylon base with castors.

Executive high back revolving chair with arms, cushioned seat and back, swivel tilt mechanism, class -4 gas lift and nylon base with castors.

Executive high back revolving chair with arms, cushioned seat and back, swivel tilt mechanism, class -4 gas lift and nylon base with castors.

Executive Medium back visitor chair with arms, Cushioned seat and back, black powder coated pipe frame.

Executive Medium back visitor chair with arms, Cushioned seat and back, black powder coated pipe frame.

Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 3275x1500 mm

Visitor chair mid back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors.

Medium back visitor chair with arms, pu cushioned seat and back, black powder coated pipe frame.

CENTER TABLE Glass Table top, chrome pleate pipe frame 9SIZE- 800W X 750D X 450HT)

ROOM TABLE WITH SIDE UNIT MADE IN PRE LAMINATED PARTICLE BOARD TOP WILL CONSIST OF 25 MM THICK TABLE TOP WITH GABLE LEG, FULL HT MODESTY AND WIRE MANGER HOLE. SIDE UNIT HAVING DRAWERS. (TABLE SIZE- 1500W X 700D X 750HT AND SIDE UNIT SIZE- 900W X 600D X 750HT)

STUDY TABLE WITH SIDE UNIT MADE IN PRE LAMINATED PARTICLE BOARD TOP WILL CONSIST OF 25 MM THICK TABLE TOP WITH GABLE LEG, FULL HT MODESTY AND WIRE MANGER HOLE. SIDE UNIT HAVING DRAWERS. TABLE SIZE- 2400W X 800D X 750HT AND SIDE UNIT SIZE- 1200W X 600D X 750HT

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) (Size (W x D) : 2000 mm x 1600 mm)

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) Size (W x D) : 2000 mm x 1600 mm

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) Size (W x D) : 1800 mm x 1800 mm

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) Size (W x D) : 2000 mm x 1600 mm

BED WITH HEADBOARD MADE IN 18 MM COMMERCIAL PLY WITH PLAIN LAMINATE FINISH ALL SIDE AND BASE IN PLY WITH INSIDE OF THREE SIDE AND MAKING A 35 MM EDGE IN THREE SIDE TO STOP MATTRESS . A HEADBOARD MADE IN PLY BASE WITH LEATHRITE CUSHIONING WITH PROPER FINISH AND THE TOP HEIGHT OF HEADBOARD FROM FFL WILL BE 1200 MM WITH USING ALL REQUIRE HARDWARE,FITTINGS ETC.(NO MATTRESS) Size (W x D) : 1800 mm x 1800 mm

DINING TABLE MADE IN PRE LAMINATE PARTICLE BOARD TOP AND BASE IN POWDER COATED METAL STRUCTURE SIZE- 2150W X 1200D X 750HT

DINING TABLE MADE IN PRE LAMINATE PARTICLE BOARD TOP AND BASE IN POWDER COATED METAL STRUCTURE SIZE- 2150W X 1200D X 750HT

DINING TABLE MADE IN PRE LAMINATE PARTICLE BOARD TOP AND BASE IN POWDER COATED METAL STRUCTURE SIZE- 2800W X 1220D X 750HT

DINING TABLE SIZE- 1440W X 700D X 750HT

DINING TABLE Table top made of 25 mm thick prelam particle board with pvc edge bending and frame made of crca black powder coated finish SIZE- 4100W X 1200D X 750HT

ROUND DINING TABLE (4 SEATER) TOP 25MM THICK IN PRE LAMINATE PARTICLE BOARD BASE SS ROD (SIZE- 1100 DIA. X 750HT)

Reading Table Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 3717x600 mm

DINING AREA STORAGE SIZE- 3180W X 600D X 750HT

U SHAPE KITCHEN SIZE- 3230X2500X 1720W X 600D X 800HT

KITCHEN SIZE- 3370W X 600D X 800HT SIZE- 1300W X 600D X 800HT

Counter Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 5260X2000x600 mm

L- SHAPE SOFA (FAMILY)

Meeting Room Table Table top made of 25 mm thick prelam particle board with pvc edge bending , 18 mm thick modesty penal and 25 mm thick gable end. Size – 4450x1200X750HT mm

STUDY TABLE WITH SIDE UNIT MADE IN PRE LAMINATED PARTICLE BOARD TOP WILL CONSIST OF 25 MM THICK TABLE TOP WITH GABLE LEG, FULL HT MODESTY AND WIRE MANGER HOLE. SIDE UNIT HAVING DRAWERS. TABLE SIZE- 2400W X 800D X 750HT AND SIDE UNIT SIZE- 1200W X 600D X 750HT

KITCHEN L- SHAPE SIZE- 2700X 1800W X 600D X 800HT

KITCHEN L- SHAPE SIZE- 2250X 2750W X 600D X 800HT

STORAGE Mid ht stoage made of 18 mm thick prelam paricle board with pvc edge bending. SIZE- 1200W X 600D X 1200HT

Library Workstation (Inline ) Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 1200x725 mm

Modular Workstation (BACK TO BACK WORKSTATION ) 60 mm thick aluminum powder coated double raceway partition, above the worktop fabric pinup board and below the worktop laminate finish, Table top 25 mm thick prelam particle board with pvc edge bending, 25 mm thick gable end prelam. 3 drawer mobile prelam pedestal unit. Size – 1200x600X750HT mm

Library Workstation (Back to Back ) Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 1200x725 mm

Staff workstation chair Medium back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors

Meeting room mid back chair with arms, cushioned seat and back, class 4 gas lift and nylon base.

Square meeting chair Glass Table top, chrome pleate pipe frame

Class room chair without arms, mid back chair with cushioned seat and black powder coated pipe frame

Library chair without arms, cushioned seat and back with black powder coated frame.

Café Chair PP seat and back with powder coated pipe frame.

Reception Table Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 7000x900 mm

Reception Chair Medium back mesh chair with arms, pu cushioned seat, synchro tilt mechansiam, class 4 gas lift and nylon base

Glass Table top, chrome pleate pipe frame Size – 1200x600 mm

Modular Workstation (BACK TO BACK WORKSTATION ) 60 mm thick aluminum powder coated double raceway partition, above the worktop fabric pinup board and below the worktop laminate finish, Table top 25 mm thick prelam particle board with pvc edge bending, 25 mm thick gable end prelam. 3 drawer mobile prelam pedestal unit. Size – 1350x800X750HT mm

Staff workstation chair Medium back chair with pu arms, pu cushioned seat and back, class 4 gas lift and nylon base with castors

DIRECTOR Sofa Three seater sofas with arms, cushioned seat and back with internal wooden frame, chrome plated legs.

Modular Workstation (BACK TO BACK WORKSTATION ) 60 mm thick aluminum powder coated double raceway partition, above the worktop fabric pinup board and below the worktop laminate finish, Table top 25 mm thick prelam particle board with pvc edge bending, 25 mm thick gable end prelam. 3 drawer mobile prelam pedestal unit. Size – 1350x800X750HT mm

Bank Counter Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 4000x600X750HT mm

Round meeting Room Table Table top made of 25 mm thick prelam particle board with pvc edge bending , black powder coated pipe pole with heavy base plate.SIZE- 1600DIA X 750HT

Conference Table Table top made of 25 mm thick prelam particle board with pvc edge bending,18 mm thick modesty penal and 25 mm thick gable end Size – 8180x1650X750HT mm

Table top made of 25 mm thick prelam particle board with pvc edge bending,and black powder coated pipe frame. Size – 1900DIA.X750HT mm

Chair

EXTERNAL LIGHTING Supply, installation, testing & commissioning of 6.0 mtr. high Classic Pole made out of G.I. preimered and PU painted, made in two sections - bottom section of 1 mtr. having a dia of 127mm and top section of 5 mtr. having a dia of 76mm, with base plate of 200mm x 200mm x 14mm and flush door at the bottom will be provided with proper strenghtheing to the cutout of the door opening, alongwith 500mm single side Classic bracket in G.I. with 6 Amp. SP MCB, neutral link, earth stud, heavy duty connector (suitable for 6 sq.mm. terminations) including wiring with 3 x 1.5 sq.mm. FR PVC insulated copper conductor wires from flush door to fixture including concrete Foundation of size 400 x 400 x 1000 mm in precast RCC block with 4 nos. J hook (Bolt) of 20 mm dia and length 750 mm. complete with Nut & washer. The foundation shall be completes with all respect including finishing and earthing as required. Cat Ref. 6m CLASSIC POLE with base plate with 500mm Single OH Classic Bracket.

Supply, installation, testing & commissioning of 6.0 mtr. high Classic Pole made out of G.I. preimered and PU painted, made in two sections - bottom section of 1 mtr. having a dia of 127mm and top section of 5 mtr. having a dia of 76mm, with base plate of 200mm x 200mm x 14mm and flush door at the bottom will be provided with proper strenghtheing to the cutout of the door opening, alongwith 500mm single side Classic bracket in G.I. with 6 Amp. SP MCB, neutral link, earth stud, heavy duty connector (suitable for 6 sq.mm. terminations) including wiring with 3 x 1.5 sq.mm. FR PVC insulated copper conductor wires from flush door to fixture including concrete Foundation of size 400 x 400 x 1000 mm in precast RCC block with 4 nos. J hook (Bolt) of 20 mm dia and length 750 mm. complete with Nut & washer. The foundation shall be completes with all respect including finishing and earthing as required. Cat Ref. 6m CLASSIC POLE with base plate with 500mm with T Bracket suitable for mounting two luminaires.

Supply, installation, testing & commissioning of 3.0 mtr. high Classic Pole made out of G.I. preimered and PU painted, made in two sections - bottom section of 1 mtr. having a dia of 114mm and top section of 2 mtr. having a dia of 76mm, with base plate of 200mm x 200mm x 14mm and flush door at the bottom will be provided with proper strenghtheing to the cutout of the door opening, alongwith 300mm single side Classic bracket in G.I. with 6 Amp. SP MCB, neutral link, earth stud, heavy duty connector (suitable for 6 sq.mm. terminations) including wiring with 3 x 1.5 sq.mm. FR PVC insulated copper conductor wires from flush door to fixture including concrete Foundation of size 400 x 400 x 1000 mm in precast RCC block with 4 nos. J hook (Bolt) of 20 mm dia and length 750 mm. complete with Nut & washer. The foundation shall be completes with all respect including finishing and earthing as required. Cat Ref. 3m CLASSIC POLE with base plate with 300mm Single OH Classic Bracket.

Supply, installation, testing & commissioning of Keselec make 60 watts LED Street Light Luminaire, painted, upper hemisphere spun aluminium and painted, an optical compartment comprising of LED engine sealed on to a frosted acrylic protector with LensoFlex2® technology, PMMA lenses with wide photometry, lifetime residual flux @ Tq 35⁰C @ 50,000 hours = 70%, Ta = 50⁰C, internal surge protection of 4kV, Power Factor > 0.95, Colour Rendering Index > 70 and neutral white light 4100K Cat Ref. MOON LED-60W-NW

Supply, installation, testing & commissioning of Keselec make 25 watts LED Post Top Light Luminaire, base and gear plate made of high pressure die cast aluminium, a high impact polycarbonate protector and a top cover of “Plastamid” with an overall tightness of IP 66.and neutral white light 4100K Cat Ref. NENA LED-25 W-NW

Supply, installation, testing & commissioning of Keselec make step light - housing aluminium, protector optical grade frosted PMMA IP65, having system wattage of 9W, in-built surge protection of 2kV, Power factor >0.9, CRI >70 and warm white light 3000k KEW STEP-9W-WW

Supply, installation, testing & commissioning of Keselec make ground embedded uplighter 15W, housing aluminium, protector toughened glass IP67, in-built surge protection of 4kV, Power factor >0.9, CRI >70 and warm white light 3000k KEW Ground Burial-15W-WW

SWIMMING POOL

SAND FILTER Supply of 1200mm dia bobbinwound fibreglass and polyester resin anti corrosive sand filter with 2" connections, The filter shall be fitted with easy acess top lid with manual air purge, flat clamp for cover tightening, FRP Foot base and necessary accessories such as glycerin filled pressure gauge, combination of manual sand and water drain etc., Filtration Velocity 40 -50m³/hr/m², Flow rate = 56.5m³/hr, Maximum working pressure : 2.5 Bar CODE: AS1200S - MAKE: AQVASTAR

FILTER MEDIA Supply of Grade 1 Eco Glass Media 20kg in bags CODE: ASGM1 - 'MAKE : WATER CO

Supply of Grade 3 Eco Glass Media 20kg in bags 'CODE: ASGM3 - 'MAKE : WATER CO

Recirculation Pump( 1Duty+1 Standby) Supply of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body made in fibreglass and reinforced polypropylene, integrated prefilter with strainer basket,fast opening translucent transperant polypropylene lid, easy opening knob system, 316 SS Shaft and mechanical seal.Self priming at 1m, Impeller : Plastic impeller, 110mm suction & 90mm return union connections, Horse power : 4.0 HP, 4.0 Kw, Phase : 3 phase 415v, Flowrate = 50 m³/hr at 11 mtr water head. CODE: QRC400T - MAKE: AQVASTAR

Main Drain Supply of Square Main Drain- Frame & Grille in ABS 300 x 300mm 33 m3/hr. 'CODE: ASMD300 - MAKE: AQVASTAR

Vacuum Point Supply of Vacuum Point & plug 2 " threaded connection, CODE: ASVPT - MAKE: AQVASTAR

Return Inlet Supply of Adj Floor Inlet -2" threaded connection- Flow 9m3/hr - 12 m3/hr with top surface to match with tile floor CODE: ASFI - MAKE: AQVASTAR

Wall conduit Supply of Wall Conduit for vacuum point with 2" threaded fitting CODE: ASWC - MAKE: AQVASTAR

Overflow Fitting Supply of Circular Main Drain- Frame & Grille in ABS 18 cu mtr/hr 150mm dia 18 cu mtr/hr 'CODE: ASCMD150G - MAKE: AQVASTAR

Overflow Grating Supply & Installation of ABS plastic deck grating of 300mm width, inter locking type, single spine 'CODE : ASOFF300 - MAKE: AQVASTAR

Underwater Light Supply of Wall Mounted underwater pool light 18W/12V with ABS Facia & Body - Warm white 'CODE: ASWML18WW - MAKE: AQVASTAR

Deck Box Supply of ABS deck box for connecting the cables between the U/W light and transformer. IP68 protection. ( 3/4" Threaded inlet & 1/2" gland connection x 2/4 nos) CODE: ASDB - MAKE: AQVASTAR

Driver Supply of SMPS driver. 150W/ 12 V 'CODE: ASDRI100W - MAKE: AQVASTAR

Chemical dosing pump Supply of Solenoid Metering Pump 05LT/HR @ 5 Bar for chlorine and alum dosing. Supplied with IP65 anti acid casing. Power supply: 230 v a.c. 50 HZ 'CODE: ASCDP505 - MAKE: AQVASTAR

Chemical Holding Tank Supply of chemical holding tank 100 liters CODE: ASCDT100 - MAKE: AQVASTAR

Manual Agitator Supply of Manual agitator 600mm CODE: ASSTR600 - MAKE: AQVASTAR

'UV System Supply of 75W UV, Suitable for 25-75KLtrs, 1.5" connections with hose tails 'CODE : EV019 - 'MAKE: EVO AQUA Marketed by AQVASTAR

Supply of Club Ladder - 4 Steps With Anti slip SS Threads SS 304, 42mm - 'Model : ASCL4 - MAKE : AQVASTAR

Butterfly Valve with Flange Adapters dia 110mm CODE: BFT400F+FLT400- MAKE: AQVASTAR

Ball Valve single union dia 90mm CODE: ASSUS300B - MAKE: AQVASTAR

Ball Valve single union dia 75mm CODE: ASSUS250B - MAKE: AQVASTAR

Ball Valve single union dia 63mm CODE: ASSUS200B - MAKE: AQVASTAR

Ball Valve single union dia 50mm 'CODE: ASSUS150B - MAKE: AQVASTAR

Flap Check Valve with Flange Adapters -90 mm dia CODE: FCV300+FLT300 - MAKE: AQVASTAR

Providing & fixing UPVC (chlorinated Ply Vinly Chloride) water supply pipes with pipes to handle pressure upto 10KG/cm2. Pipes shall be joined using solvent welded UPVC fitting i.e. Tees, elbows, Couplers, Unions, Reducers, brushings etc. with only UPVC solvent cement. Velocity Considered: 1.2-1.5 m/sec at Suction and 2.0- 2.5 m/sec at Disharge. & Overflow pipe : 0.8-1.0 m/sec Make: SUPREME/PRINCE Note : Plant room distance from pool considered 10 meters

Wires/cables - Polycab / Finolex ( lights-copper flexible cable) 'Conduits Make- AKG

Supply of Control panel for controlling pumps, lights.Body shall be powder coated sheet metal cabinet for indoor installation, wall mounted, dust proof and shall be with hinged doors with rubber gasket. Panel shall read and display pump status, light status,voltage, current. Panel shall come with single phase prevention, phase reversal protection. (in case of 3-phase pumps). MAKE: RESILIENT/ APPROVED EQUIVALENT

Vacuum Hose 'Supply of 1.5" (38mm) Flexible floating Hose with end swivels-15 Metre 'CODE: ASHS15 - MAKE: AQVASTAR

Wall Brush Supply of18" (450mm) Heavy duty wall brush with poly bristle - Dark blue colour CODE: ASWBH - MAKE: AQVASTAR

Algae brush 'Supply of 10"(250mm) Algae brush- SS bristle, clip in fastening- Dark Blue 'CODE: ASABH10 - MAKE: AQVASTAR

Supply of Heavy duty Flat net with 5 Micron mesh, clip in fastening- Dark Blue 'CODE: ASFNH - MAKE: AQVASTAR

Deep Net 'Supply of Heavy duty 15" deep net with 5 Micron mesh, clip in fastening- Dark Blue 'CODE: ASDNH - 'MAKE: AQVASTAR

Telescopic Pole Supply of 8-16' Telescopic pole with handgrip & clip-in fastening- Corrugated- Silver colour 'CODE: AS816 - MAKE: AQVASTAR

Vacuum Head 'Supply of 350mm Anodised Aluminium VAC head- clip in fastening-Silver 'CODE: ASALVH350 - MAKE: AQVASTAR

Test Kit 'Supply of of 3 way Test kit ( PH/ CL/ BR) 'CODE: AS -TK - MAKE: AQVASTAR

Design, Supervision, Installation, Testing & Commissioning

SAND FILTER Supply of 1200mm dia bobbinwound fibreglass and polyester resin anti corrosive sand filter with 2" connections, The filter shall be fitted with easy acess top lid with manual air purge, flat clamp for cover tightening, FRP Foot base and necessary accessories such as glycerin filled pressure gauge, combination of manual sand and water drain etc., Filtration Velocity 40 -50m³/hr/m², Flow rate = 56.5m³/hr, Maximum working pressure : 2.5 Bar CODE: AS1200S -MAKE: AQVASTAR

FILTER MEDIA Supply of Grade 1 Eco Glass Media 20kg in bags 'CODE: ASGM1 - 'MAKE : WATER CO

Supply of Grade 3 Eco Glass Media 20kg in bags 'CODE: ASGM3 - 'MAKE : WATER CO

Recirculation Pump( 2 Duty+1 Standby) 'Supply of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body made in fibreglass and reinforced polypropylene, integrated prefilter with strainer basket,fast opening translucent transperant polypropylene lid, easy opening knob system, 316 SS Shaft and mechanical seal.Self priming at 1m, Impeller : Plastic impeller, 110mm suction & 90mm return union connections, Horse power : 4.0 HP, 4.0 Kw, Phase : 3 phase 415v, Flowrate = 50 m³/hr at 11 mtr water head. CODE: QRC400T - MAKE: AQVASTAR

Main Drain Supply of Square Main Drain- Frame & Grille in ABS 300 x 300mm 33 m3/hr 'CODE: ASMD300 - MAKE: AQVASTAR

Return Inlet 'Supply of Adj Floor Inlet -2" threaded connection- Flow 9m3/hr - 12 m3/hr with top surface to match with tile floor CODE: ASFI - MAKE: AQVASTAR

Vacuum Point 'Supply of Vacuum Point & plug 2 " threaded connection, 'CODE: ASVPT -MAKE: AQVASTAR

Wall conduit Supply of Wall Conduit for vacuum point with 2" threaded fitting CODE: ASWC - MAKE: AQVASTAR

Supply of Foam Nozzle 1.5" OA Design (Each nozzle 309 LPM @ 3 Mtr height ) 'CODE: ASFN40 - MAKE: AQVASTAR

Supply of Foam Nozzle 1" OA Design (Each nozzle 60 LPM @ 0.6 Mtr height ) 'CODE: ASFN25 - MAKE: AQVASTAR

Supply of Submersible pump 2008.5 LPM & 8 mtr head 'CODE: KOS-1030+ - 'MAKE: KRILOSKAR

Supply of Submersible pump 480 LPM & 6 mtr head 'CODE: KOS-318+ - 'MAKE: KRILOSKAR

Under Water Ring light 'Supply of Stainless Steel 316 Facia- body Ring light 9W-12V - Warm white Suitable for 1" nozzle ( 32mm orifice) 'CODE: ASRL9SS1 - 'MAKE: AQVASTAR

'LED Driver Supply of LED SMPS driver 150W/12V 'CODE: ASDRI100W

Underwater Light Supply of Stainless Steel 316 Stand/ Niche mounted LED light 9W- 12V, Warm White 'CODE: ASNSM9SS - MAKE: AQVASTAR

Driver 'Supply of SMPS driver. 150W/ 12 V 'CODE: ASDRI100W - MAKE: AQVASTAR

'Commerical UV System VGE UV system Model VGE pro 400-204 is designed to work at Medium pressure capable to dose UV at a rate of 400J/m2. The unit shall be made of SS316L body with U shape irradiation reactor chamber with 6 BAR maximum pressure rating. The unit shall be capable to work around 92 cumtr/ hr flow with a 4" connection. The unit shall used AOP , Advanced oxidation processes . The UV comes with control panel and monitor with sensors to check UV & temperature. The units UV Lamp shall be placed to perpendicular to the direction of flow. The Lamp base shall be equipped with SMART PIN TECHNOLOGY where the lamp shall be removed when the system is pressurised. The UV lamp expected life time shall be 16000 hrs. The end connections shall be of 100mm dia SS flanges. 'CODE: BL400-204 - MAKE: BLUE LAGOON , Netherlands ( Marketted by AQVASTAR)

Butterfly Valve with Flange Adapters dia 110mm CODE: BFT400F+FLT400 - MAKE: AQVASTAR

Ball Valve single union dia 90mm CODE: ASSUS300B - MAKE: AQVASTAR

Ball Valve single union dia 75mm CODE: ASSUS250B - MAKE: AQVASTAR

Ball Valve single union dia 63mm 'CODE: ASSUS200B - MAKE: AQVASTAR

Flap Check Valve with Flange Adapters -90 mm dia CODE: FCV300+FLT300 - MAKE: AQVASTAR

Providing & fixing UPVC (chlorinated Ply Vinly Chloride) water supply pipes with pipes to handle pressure upto 10KG/cm2. Pipes shall be joined using solvent welded UPVC fitting i.e. Tees, elbows, Couplers, Unions, Reducers, brushings etc. with only UPVC solvent cement. Velocity Considered: 1.2-1.5 m/sec at Suction and 2.0- 2.5 m/sec at Disharge. & Overflow pipe : 0.8-1.0 m/sec Make: SUPREME/PRINCE Note : Plant room distance from water features considered 10 meters

Supplying of copper cable with PVC conduits from junction boxes to transformer & transformer to control panel. ( length in mters as per drawing)

Supply of Control panel for controlling pumps, lights.Body shall be powder coated sheet metal cabinet for indoor installation, wall mounted, dust proof and shall be with hinged doors with rubber gasket. Panel shall read and display pump status, light status,voltage, current. Panel shall come with single phase prevention, phase reversal protection. (in case of 3-phase pumps). MAKE: RESILIENT / APPROVED EQUIVALENT

Vacuum Hose Supply of 1.5" (38mm) Flexible floating Hose with end swivels-18 Metre 'CODE: ASHS18 - MAKE: AQVASTAR

Wall Brush Supply of18" ( 460mm ) Wall brush- with Polypropylene bristles, Polished Aluminium reinforced back & handle, clip in fastening 'CODE: ASWBHR - MAKE: AQVASTAR

Algae brush Supply of 10"(250mm) Algae brush- SS bristle, clip in fastening- Dark Blue 'CODE: ASABH10 - MAKE: AQVASTAR

Flat Net 'Supply of Heavy duty Flat net with 5 Micron mesh, clip in fastening- Dark Blue 'CODE: ASFNH - MAKE: AQVASTAR

Deep Net Supply of Heavy duty 15" deep net with 5 Micron mesh, clip in fastening- Dark Blue 'CODE: ASDNH - 'MAKE: AQVASTAR

Telescopic Pole 'Supply of 8-16' Telescopic pole with handgrip & clip-in fastening- Corrugated- Silver colour 'CODE: AS816 - MAKE: AQVASTAR

Vacuum Head 'Supply of 350mm Anodised Aluminium VAC head- clip in fastening-Silver 'CODE: ASALVH350 - MAKE: AQVASTAR

Test Kit 'Supply of of 3 way Test kit ( PH/ CL/ BR) 'CODE: AS -TK - MAKE: AQVASTAR

Design, Supervision, Installation, Testing & Commissioning

IRRIGATION HDPE PIPE PE 80 PN 6 ON 90 184984 (Make Godavan, Narendra)

PE 80 PN 6 ON 75 184984 (Make Godavan, Narendra)

PE 80 PN 6 ON 63 184985 (Make Godavan, Narendra)

PE 80 PN 6 ON 50 184986 (Make Godavan, Narendra)

PE 80 PN 6 ON 40 184987 (Make Godavan, Narendra)

Sleeve Pipe (200mm)- PVC

Conduit Pipe ( 1 ")

Sprinklers and Accessories The sprinkler shall be of the gear-driven, rotary type, capable of covering a 43-75 foot (13.1-22.9 m) radius at 40 - 90 PSI (2.8 bar/280 kPa-6.2 bar/620 kPa) with a precipitation rate of 0.3-0. 78 inches (0.7-2.0 cm) per hour. The sprinkler shall be available with six (6) color coded nozzles with a trajectory of 26° discharging from 5.1- 2.5 GPM (19.3-123.1 1/m) which incorporates three (3) discharge ports. The sprinkler shall have a stainless steel radius adjustment screw. - The sprinkler shall have a minimum of 4-inch (10.2 cm) pop-up stroke to bring the rotating nozzle turret into a clean environment . The body and riser of the sprinkler shall be constructed of corrosion resistant, impact (Make : K-Rain (USA), Toro (USA) Nelson(USA)

Rotor Connecting Swing Joint 1 " .. Its Flexible Swing Arm And Joints allow easy adjustment of head to grade . It Reduce Potential for leaks with flexible Parts that wont break or crack under stress like rigid fittings . It has Operating Pressure upto 6kg/cm2 and Surge Pressure upto 10kg/cm2 and having temperature upto 60°C (Make : Harit I Jain)

The sprinkler shall be of the gear-driven. rotary type, capable of covering a 26-46 foot (7.9-14.0 m) radius at 20-70 PSI (1.4 bar-4.8 bar) with a precipitation rate of 0.21-1.14 inches per hour. The sprinkler shall be available with nine (9) numerically coded nozzles with a trajectory of 26° discharging from 0.5 to 0.9 GPM and four (4) low angle nozzles with a trajectory of 12° discharging from 1.2 to 8.6 GPM (4.5-32.5 1/m). The sprinkler shall have radius adjustment capabilities by means of a stainless-steel nozzle retainer/radius adjustment screw.The sprinkler shall be adjustable in both part circle and a true full continuous 360° circle configuration. The adjustable part circle unit shall be minutely adjustable from 40° to 360°. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret.The unit shall have a 3/4-inch Female National Pipe Thread (FNPT) inlet. The sprinkler shall be serviceable after installation by unscrewing the body cap, removing the riser assembly, and extracting the inlet filter basket.The sprinkler may be equipped with an optional drain check valve to prevent low head drainage.the body and riser of the sprinkler shall be constructed of corrosion resistant, impact (Make : K-Rain (USA), Toro (USA) Nelson(USA)

Providing of Swing Joint 3/4" .Its Flexible Swing Arm And Joints allow easy adjustment of head to grade . It Reduce Potential for d leaks with flexible Parts that wont break or crack under stress like 36960 rigid fittings . It has Operating Pressure upto 6kg/cm2 and Surge. Pressure upto 10kg/cm2 and having temperature upto 60°C . It has maximum flow 1800 litre per hour - (Make : lrriworld /My lrigacio

The spnnkler shall be of the gear-driven, rotary type, capable of covering a 18 - 33 foot (5.5 - 10meter) radius at 20- 70 PSI (2.07 bar/207 kPa - 3.45 bar/345 kPa) with a precipitation rate of 0.51 - 0.6 inches per hour. The sprinkler shall be available with five (5) numerically coded nozzles with a trajectory of 26° discharging from 0.8 GPM (2.8-14.4 1/m). The sprinkler shall have radius adjustment capabilities by means of a stainless-steel nozzle retainer/radius adjustment screw. The sprinkler shall be available in an adjustable part circle configuration. The adjustable part circle unit K-Rain shall be minutely adjustable from 40° to 360°. The sprinkler shall , have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage Nelson(pattern set. he sprinkler shall be available in an adjustable part circle USA)configuration. The adjustable unit shall be adjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). The sprinkler shall have 4-inch (10.2 cm) pop-up stroke to bring the rotating nozzle turret into a clean environment. The sprinkler shall have a rubber cover firmly attached to the top of the turret. The body and riser of the sprinkler shall be constructed of corrosion resistant, impact resistant, heavy duty ABS. It shall have a stainless steel spring for positive retractionIof the riser when irrigation is comolete (Make : K-Rain (USA), Toro (USA) Nelson(USA)

The sprinkler shall be a Rotary type capable of covering 3.9meter - K-Rain 8.5meter to 30 foot radius at 30 to 50 PSI. The sprinkler body shall be available with a 4-inch pop-up stroke, depending on the body specified, to bring the nozzle into a clean environment. When specified the pop-up versions of the sprinkler shall be fitted with a drain check valve capable of checking up to 10 feet (3 m) in elevation Change. (Make : K-Rain (USA), Toro (USA) Nelson(USA)

Providing of Swing Joint 1/2" .Its Flexible Swing Arm And Joints allow easy adjustment of head to grade . It Reduce Potential for leaks with flexible Parts that wont break or crack under stress like rigid fittings . It has Operating Pressure upto 6kg/cm2 and Surge Pressure upto 1 Okg/cm2 and having temperature upto 60°C . It has maximum flow 1800 litre per hour -lrriworld I My lrigacio

PP Service Saddle (40mm - 75mm) X 1"

PP Service Saddle (40mm - 75mm) X 3/4"

pp Service Saddle (40mm - 75mm) X 1/2"

3/4" coupling valve

3/4"coupling key

Swivel Hose Elbow

PP Service Saddle- 90mm X 1" with ASTM Riser (Make:'Sumanl I lrriworld/ My lrigacio)

Drip And Accessories lnline brown color Polytube with dual-layer black from Inside and brown from outside with 16mm dia. , 0.30-centimeter meter spacing of dripper, 2Lps discharge with pressure rating 0.8 to 6 bar, wall thickness 1.1 mm With All Necessory fittings Like Take off, Gromet . connector, tees elbows end caos etc. as reauired. (Make : Netafim, lrriworld, Sumani)

Plastic Lateral Stake . 2 staple distribution cubing • dripline to finished grade (Make : Netafim, lrriworld,)

Supply,Fixing & commissioning of40 *SO mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. (Make : lrriworld, Jain)

Supply,Fixing & commissioning of SO *63mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. (Make : lrriworld, Jain)

Valves and Filtration Unit Providing of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem 0- Ring, non mechani'cal ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 90mm. with pressure rating PN 10 - lrriworl (Make : Jain, lrriworld, Netafim)

Providing of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem 0- Ring, non mechani'cal ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 75mm. with pressure rating PN 10 - lrriworl (Make : Jain, lrriworld, Netafim)

Providing of PVC Single Union Ball Valve,security pivot to maintain. lever in space,double water tight joint,direct injection stem,Stem 0- Ring, non rnecheni'cal ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 63mm. with pressure rating PN 10 -lrriworld(MAke : Jain, lrriworld, Netafim)

Providing of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,dlrect injection stem,Stem 0 Ring, non mechani'cal ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size SOmm. with pressure rating PN 10 -lrriworld (Make : Jain, lrrlworld, Netaflm)

Providing & Fixing of Valve box 10" Round Valve Box with cover. The valveboxes shall be high strength. high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture.·(Make : lrriworld,My lrigacio,Toro)

Providing & Fixing of Valve box 6" Round Valve Box with cover. The valveboxes shall be high strength. high density polyethylene constructed material. It should beUV stabilizer with anti oxidants, resistant to moisture.- lrriworld I My lrigacio ·(Make : lrriworld,My lrigacio,Toro)

Providing of Auomatic Disc Filter 3" (50 m3/hr)With the excellent disc technology T type disc filter have micron . precise , high efficiency and large volume filteration advantage . The well designed diagonally grooved structured provide - lrriworld /My lrigacio I Jain (MAke : Neerway, Jain,· Netafim)

Providing of back mounted Connection Pressure Gauze (glycerin filled)-lrriworld I Mv trrioacio I Jain (Make : lrriworld,My lrioacio,Sumani)

Providing & Fixing of a double acting Continuous Air release valve 1". The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation .. -Sumani/ Mv iricaclo World/ lrriworld (Make : lrriworld,My lrigacio,Sumani)

PP Service Saddle- 90mm X 3/4" with Riser long - Sumani I lrriworld/

Pressure Relief valve 2" with bypass outlet- My lrigacio /lrriworld

Automation Unit Providing of 2" Solenoid Valve .The valve shall be a normally closed, electronically-actuated, diaphragm-operated, remote control zone valve. The valve shall be capable of operating between 20 and 150 PSI (0.7 bars 10.3 bars) with a flow range of between 5 and 120 GPM (19 UM and 454 UM). The valve body shall be constructed of heavy duty, corrosion and UV Resistant PVC, rated to 150 PSI (10.3 bars). The valve shall have a manual external bleed screw for manual operation in system start-up. The valve shall have an external bleed screw with removable metering pin for easy cleaning of the metering pin without disassembly of the valve. The valve shall have a manual internal bleed through solenoid for manual operation without discharging water outside the valve. The valve shall have a removable inlet cap to allow for easy conversion from globe to angle-style valve. The valve shall have a heavy duty diaphragm. The standard solenoid shall be a 24 VAC, 60 Cycle unit with a .43 amp inrush current and .25 amp holding current. The solenoid shall be an encapsulated, one-piece unit with captive plunger to allow solenoid to be removed without losinc the internal olunaer. l - K-Rain I USA) I (MAke : K-Rain (USA), Toro (USA),Nelson(USA)

Providing of 1.5" Solenoid Valve .The valve shall be a normally closed. electronically-actuated. diaphragm-operated, remote control zone valve. The valve shall be capable of operating between 20 and 150 PSI (0.7 bars 10.3 bars) with a flow range of between 5 and 120 GPM (19 UM and 454 UM). The valve body shall be constructed of heavy duty, corrosion and UV Resistant PVC, rated to 150 PSI (10.3 bars). The valve shall have a manual external bleed screw for manual operation in system start-up. The valve shall have an external bleed screw with removable metering pin for easy cleaning of the metering pin without disassembly of the valve. The valve shall have a manual internal bleed through solenoid for manual operation without discharging water outside the valve. The valve shall have a removable inlet cap to allow for easy conversion from globe to angle- style valve. The valve shall have a heavy duty diaphragm. The standard solenoid shall be a 24 VAC. 60 Cycle unit with a .43 amp inrush current and .25 amp holding current. The solenoid shall be an encapsulated, one-piece unit with captive plunger to allow solenoid to be removed without losina the internal olunoer.) - K-Rain ( USA\Make : K-Rain (USA), Toro ( USA) Nelson( USA)

Providing and fixing of Decoder Controller . It controls up to 99 zones. Perfect for use on large commercial, industrial and residential sites .Along with the ability to run upto 99 zones, the SiteMaster has an extra large 5" X 3" display screen with a full keyboard for easy naming and displays watering days, number of starttimes, number of along with separate. dedicated lines and advanced on-board diagnostictools. makes troubleshooting your system both easy and accurate.-K-Rain ( USA) K-Rain ( USA\Make : K-Rain (USA), Toro ( USA) Nelson( USA)

Providing and Fixing of Single Station Decoder Capable for two way communication - K-Rain ( USA) Weathermatic Make : K-Rain (USA)

Providing and Fixing of Surge Protection Unit -K-Rain ( USA)

Providing and Fixing of Earthing Rod Of Copper for Surge Protection Unit (Make : Indian)

MAXI CABLE 12/2 2500 FT (610M) ROLL (Rate in M) (Make : lrriworld, Polvcab,)

Providing & Fixing of DBR Connectors. It shall be pre filled, low voltage. dry splice. Direct Bury, water proof wire connector that [protect electrical connection from corrosion and moisture Paige /3M

Rain Sensor - K-Rain ( USA)

Pumping Unit Pump with the discharge of 3.28 lps @ 70mtr head (Make : Lubi, Crompton) Panel with Star Delta starter,MCB,voltmeter,ammeter, Single phase I Preventer etc. (Make : L&T) UPVC I ASTM fittings for pump Suction (3") ,Delivery Header Pipe(3") (Make : Astral, Supreme, Fonolex)

Non Return Valve 2" (Make : Netafim, lrriworld)

Laying jointing and commisioning PVC pipes from 40 mm OD to 63 mm OD inclusing compression fitting,treNch size min 600mm deep for main lines, 300mm-400 mm deep for sub main line backfilling with compaction and removing access soil. Includes installation and commisioning of all Irrigation hardwares like Sprinklers, Dripper, Driplines, valves Saddles, Swing Joints, Valve Boxes, Filter Unit and Automation Items Completer as per drawing, Specification with mono Bluock pump

SAND FILTER Supply of 1200mm dia bobbinwound fibreglass and polyester resin anti corrosive sand filter with 2" connections, The filter shall be fitted with easy acess top lid with manual air purge, flat clamp for cover tightening, FRP Foot base and necessary accessories such as glycerin filled pressure gauge, combination of manual sand and water drain etc., Filtration Velocity 40 -50m³/hr/m², Flow rate = 56.5m³/hr, Maximum working pressure : 2.5 Bar CODE: AS1200S - MAKE: AQVASTAR

FILTER MEDIA - Supply of Spiral Bio Media - 'MAKE : WATER CO

'Recirculation Pump( 3 Duty+1 Standby) Supply of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body made in fibreglass and reinforced polypropylene, integrated prefilter with strainer basket,fast opening translucent transperant polypropylene lid, easy opening knob system, 316 SS Shaft and mechanical seal.Self priming at 1m, Impeller : Plastic impeller, 110mm suction & 90mm return union connections, Horse power : 4.0 HP, 4.0 Kw, Phase : 3 phase 415v, Flowrate = 50 m³/hr at 11 mtr water head. CODE: QRC400T - MAKE: AQVASTAR

Main Drain Supply of Square Main Drain Frame in SS & grille in ABS 450x450mm 80m3/hr. 'CODE: ASMD450SF -, MAKE: AQVASTAR

Return Inlet Supply of Adj Floor Inlet -2" threaded connection- Flow 9m3/hr - 12 m3/hr with top surface to match with tile floor CODE: ASFI - MAKE: AQVASTAR

Underwater Light Supply of Wall Mounted underwater pool light 18W/12V with ABS Facia & Body - Warm white 'CODE: ASWML18WW - MAKE: AQVASTAR

Deck Box Supply of ABS deck box for connecting the cables between the U/W light and transformer. IP68 protection. ( 3/4" Threaded inlet & 1/2" gland connection x 2/4 nos) CODE: ASDB - MAKE: AQVASTAR

Driver Supply of SMPS driver. 200W/ 12 V'CODE: ASDRI200W MAKE: AQVASTAR

Butterfly Valve with Flange Adapters dia 200mm 'CODE: BFT400F+FLT400 - MAKE: AQVASTAR

Butterfly Valve with Flange Adapters dia 160mm 'CODE: BFT600F+FLT600 - MAKE: AQVASTAR

Butterfly Valve with Flange Adapters dia 110mm CODE: BFT400F+FLT400 - MAKE: AQVASTAR

Ball Valve single union dia 90mm CODE: ASSUS300B - MAKE: AQVASTAR

Ball Valve single union dia 75mm CODE: ASSUS250B - MAKE: AQVASTAR

Flap Check Valve with Flange Adapters -90 mm dia CODE: FCV300+FLT300 - MAKE: AQVASTAR

Providing & fixing UPVC (chlorinated Ply Vinly Chloride) water supply pipes with pipes to handle pressure upto 10KG/cm2. Pipes shall be joined using solvent welded UPVC fitting i.e. Tees, elbows, Couplers, Unions, Reducers, brushings etc. with only UPVC solvent cement. Velocity Considered: 1.2-1.5 m/sec at Suction and 2.0- 2.5 m/sec at Disharge. & Overflow pipe : 0.8-1.0 m/sec Make: SUPREME/PRINCE Note : Plant room distance from water features considered 10 meters

Supplying of copper cable with PVC conduits from junction boxes to transformer & transformer to control panel. ( length in mters as per drawing) 'Wires/cables - Polycab / Finolex ( lights-copper flexible cable) - 'Conduits Make- AKG

Supply of Control panel for controlling pumps, lights.Body shall be powder coated sheet metal cabinet for indoor installation, wall mounted, dust proof and shall be with hinged doors with rubber gasket. Panel shall read and display pump status, light status,voltage, current. Panel shall come with single phase prevention, phase reversal protection. (in case of 3-phase pumps). MAKE: RESILIENT / APPROVED EQUIVALENT

Design, Supervision, Installation, Testing & Commissioning

Add 12 % GST

Add 1% Labour Cess

M/S B.P.CONSTRUCTION

Dipanshu DIPANSHU PROMOTER AND BUILDER PVT. LTD.

M/S MADAN PRASAD

M/S RAM KRIPAL SINGH CONSTRUCTION PRIVATE LIMITED

M/s Badri Rai & Company

Venkataramane Gowda

Bidder Name

Venkataramane Gowda