Construction of Glass Green House with Integrated Museum for Establishment of Kalaignar Centenary Park, Dr.Radhakrishnan Road, Chennai

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing and injecting chemical emulsion for pre-constructional Anti-Termite treatment with minimum 10 years guarantee in three stages as given below, creating a chemical barrier under and all around the column pits, wall trenches, basement excavation, top surface of plinth & along the external perimeter of the building, expansion joints, surrounding of pipe and conduits etc., complete with chlorophyrifos 20 emulsifiable concentrate in proportion 1:19 (1 part of chlorophyrifos 20EC and 19 parts of water). Cost shall include all material and labour, etc. (Plinth Area at Ground Floor level only shall be measured and paid for). Treatment shall be carried out only through specialised and approved agency.

Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and Laying M 25 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items.Rate to include all leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer- in-charge

a) Upto Basement

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering sides and soffits including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm center to center or at suitable intervals, etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

b) Centering column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.

c) For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCCSlab, etc.

Plastering with Cement Mortar 1:4 (One Cement and Four Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Providing and fixing Semi- Unitized System Triple barrier glazing System size of 131mmx67(Including 50mm Aluminium Cap) . The semi unitized glazing system constitute of (6mm HS glass +1.52pvb + 6mm clear glass)13.52 laminated glass - ET125 HSglass to be glazed to aluminium sub-frame alongwith structural sealant (Two part) and double sidedNorton tape and sub frame fixed to aluminium main frame with toggle, screws etc. Provided weather seal EPDM gasket at all groves. Provided exterior perimeter weather sealant non staining. The main frame shall be fixed to the host structure and not adjoining materials along with H.D.G. m.s brackets of required sizes, stainless steel Anchors, Bolts, bimetallic separators, nut & bolt and washers and required component etc. The minimum distance between Glass edge and aluminium glassseparator should be 5mm at all level and height. All facade fixing component i.e. bracket, anchor, nut & bolt, screws etc. should not be visible from out side.The system is designed to withstand a wind pressure of 2.1 kpa . All exposed aluminium profiles will be Super durable Powder coating in 60 micron +/- 3 micron as per approved shade. Nonexposed aluminium shall be chromozed

Supplying ,fabricating and placing the arch type truss of required span using the MS hallow box section 80mm, 100mm, 150MM, 200MM, 300MM dia (4.396 kg/m) both rafter and tie and fixing the inner centre vertical stiffner bracings 65mm dia as per design drawing given by the depart mental officers including cutting the pipe required size with the aid of gas cutting machine and welding rigidly with aid of 10 guage electrode grinding smoothy and with 25 x 6 mm flat and labour for fabrication and prtty iron works and fixing the purlin cleat etc conveying the materials to the site and erecting the same to height of 3 m from ground level and finally painting two coats of SEP over primer etc complete complying with standard specification and as directed by the departmental officers at site of work.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification.

TNEB METERING BOARD Supply,installation and commissioning of TNEB Meter Board suitable for 3 Phases 200 A service connection made up of suitable iron angel frame work of size 2 feet x 1.5 feet using angle iron of size 1 1/2" x 1 1/2 " x 1/4" rigidly fixed on wall covered with Hylem sheet of size 2 feet x 1.5 feet of 12 mm thickness with necessary bolts and nutts supports and Supply,installation and commissioning of 3 nos 200 A fuse units (500V) ,1 No Neutral link ,Copper flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection and to complete the work etc. (SD-131)

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no Change Over Switch, Main 2nos 200A 4Pole MCCB I/C, 4Pole MCCB,14nos of 63A 4Pole MCCB's, O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Supply and erection 8 WAY 3 PHASE VDB of powder coated wall mounting TPN DB made of 1.6mm thick CRCA sheet steel dust and vermin proof enclosure with suitable size of bus bar with suitable bus insulators and sleeve for main and interconnecting Switchgear, earthing as per requirement of CEIG and IE regulation. For the provision of following rated switchgear in the panel.with Outdoor application IP65 as specified Protection ( For Power Distribution & Landscape Lighting) Incoming : 63 A 4P MCB - 1 No Outgoing : 32A TP MCB 10kA - 8 Nos ( Data - 2 )

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing on wall with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like Standard make ) (SD-167)

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (6Points / Coil ) (length of point 12 to 18 mtr) (SD-337)

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (4Points / Coil ) (length of point 12 to 18 mtr) (SD-333)

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour. (Data-3)

Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes. ( Data - 4 )

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor with painting of suitable colour. (SD-429)

Supply and laying of 4C X 10 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. ( SD - 202)

Supply and laying of 3.5C X 25 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. ( SD - 204 )

Supply and laying of 3.5 x 120 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. ( SD - 209)

Supply and fixing of brass cable gland for 4C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc. (Data- 5)

Supply and fixing of brass cable gland for 31/2C x 25 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc (SD-186)

Supply and fixing of brass cable gland for 3.5 x 120 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc (SD-192)

Supply and providing cable end termination of 3.5 x 25sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with eelctrical connection complete and etc to complete the work. (SD-235)

Supply and providing cable end termination of 3.5 x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with eelctrical connection complete and etc to complete the work. (SD-240)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233)

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work (SD-234)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work ( SD 76)

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work. ( Data - 6 )

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work (SD - 75)

Supply and fixing of down light 15W Light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. ( SD-86)

Supply and fixing of bollard light 10W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and Fixing of 20W 4feet LED Tube Fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and etc to complete the work (SD-87)

Supply and Fixing of 40 W Linear Hanging Light ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 meter rod with fan clamp with side plates and cross arm of size 450mm(18") (SD-106)

Supply and fixing of 1no of 6A two Modular 5Pin socket, 1no 6A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection. Higher End ( SD-464)

Supply and fixing of 1no of 16A two Modular socket, 1no 16A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection. Higher End ( SD-488)

Supply, erection, testing, commissioning of 160KVA DG Set with Acoustic Enclosure with Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 200 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive. M-2074

Design, manufacture, supply, installation of D-skin Floor Mounted Draw through type, Air handling unit With Humidifier

33TR AHU- 13200 CFM - ESP -50MM

11 TR Ductable Outdoor Unit

Supply,Installation,Testing and commissioning of 11kw star delta starter Control panel with RH and temperature display

Supply and fixing of Copper Refrigerant Piping of 28.60mm (1 1/8" )dia

Supply and fixing of Copper Refrigerant Piping of 22.20mm (7/8") dia

Supply and fixing of water drain pipe line-40mm

Supply and providing of pipeline nitrle rubber insulation for.Refrigerant and drain pipe lines

Supply and filling of Referigerant of GAS-R410A

Supply, Fabrication and erection of fabricated ducting made up of GI Sheet of 24G Thickness

Supply, Fabrication and erection of fabricated ducting made up of GI Sheet of 22G Thickness

Supply, Fabrication and erection of fabricated ducting made up of GI Sheet of 20G Thickness

SITC of Acoustic lining of ducting with 10mm thick open cell nitrile rubber foam of 140 to 180 kg/cum density, thermal conductivity 0.050w/mk and class 1 rating (Inside surface for the ducts shall be covered with adhesive recommended by manufacturer) the adhesives meet specified listed under SCAQMD.Rule 1113.1168

Supply and providing thermal insulation of 9mm thick vidoflex with Aluminum Foil

Supply and fixing of extruded aluminum powder coated, Supply and return Air Grilles / Diffusers wiht Valume Control Damper

Supply and installation of of 18 G GI butterfly damper with Brass bush and operating handle. The damper shall have multiple controlling option and should have locking quadrant provision. The size shall be as below

Supply and fixing of Flexible Canvas Connection

Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Oudoor Unit

Supply and Run of 8 of 4 sq.mm PVC armoured cable Copper Cable

Subtotal

SAI SAKTHI AND CO