Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹7.8 L+₹32,210 (4.32%)Rejected-Finance | L2 | Rejected-Finance High | |
| 3 | L3₹8.9 L+₹1.4 L (18.8%)Rejected-Finance VILL RANIA GT ROAD DHARIWAL DISTT GURDASPUR PB PIN 143519 | GURDASPUR | PUNJAB | 143519 | L3 | Rejected-Finance High | |
| 4 | L4₹9.9 L+₹2.4 L (32.4%)Rejected-Finance DHANGU ROAD PAHTANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance High | |
| 5 | L5₹12.2 L+₹4.8 L (64.0%)Rejected-Finance | L5 | Rejected-Finance High |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
6 Sept 2021, 6:00 pmClosed
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Repair to wooden furniture, MAP furniture and misc furniture at Tibri Mil Stn under GE Gurdaspur.
2021_MES_466850_1
GE GSR-33/2021-2022
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer, Gurdaspur (Tibri)
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹30,000
17 Nov 2021
10 Aug 2021
8 Sept 2021
10 Aug 2021
6 Sept 2021
25 Aug 2021
Amount
CHAIR VERANDAH PPCP (FD/MAP-II/15) S& F of PVC seat and back of Chair verandah with 4 mm thick PPCP sheet of Make: Harmony/ Amco as directed by Engineer-in -charge
S&F hard rubber shoes suitable for chair verandah complete all as specified and directed
M&L for welding to Chair verandah where required n .exc 2.5 cm in length complete all as specified and directed
CHAIR DINING PVC SEAT (FD/MAP-II/05) S& F of PVC seat of Chair dining with 4 mm thick PPCP sheet of Make: Harmony/ Amco as directed by Engineer-in -charge
M&L for melamine polishing to Chair dining complete all as per drg as specified and directed
CHARPOY OR STEEL (FD /MAP-II/01) Removing of old unserviceable Plywood (BWR) grade from charpoy and tightening of complete charpoy and S&F of new plywood (BWR) size 2000 x 900 x12 mm thick on the charpoy as directed by Engr-in-charge, Make : Archid/Green ply/ Century.
CHAIR EASY (FD 202 & FD-250) Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, as specified and directed
All as per Srl item No 08 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning.
All as per Srl item No 08 above but back bottom size- 480 x20 x100mm.
All as per Srl item No 08 here-in-before but stiffener of sizes 50 x 25 x 500mm.
All as per Srl item No 08 here-in-before but arms of size as shown on drg.
M&L for melamine polishing to chair easy complete all as per drg, as specified and as directed.
Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.
TABLE CENTRE (FD -29, FD-152, FD-224 & FD-375) Replacement of old unserviceable top by providing new 18/19mm thick MDF board commercial pasted with laminated sheet teak faced 1mm thick including 3mm thick teak wood edging all round complete all as per drawing, as specified and as directed
Replacement of old unserviceable legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and as directed and as specified.
All as per Srl item No 16 above but long rail.
All as per Srl item No 16 above but short rail.
M&L for melamine polishing to table centre complete all as shown on drg, as specified and as directed
TABLE PEG (FD-25 & FD-236) Replacement of old unserviceable top by providing new top of 18/19mm thick MDF board commercial type pasted with 1mm thick laminated sheet teak faced including 3mm thick teak wood edging all round complete all as directed, as specified and as shown on drawing.
Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified.
All as per Srl item No 21 above but long rail.
All as per Srl item No 21 above but short rail.
M&L for melamine polishing to table peg complete all as shown on drg, as Specified and as directed.
TABLE DINNING (FD/MAP-11/03) 1200 X 900 X 760MM) Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging around complete all as shown on drg as Specified and as directed.
Replacement of old unserviceable leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, as specified and as directed.
All as per Srl item No 26 above but top long rail.
All as per Srl item No 26 above but top short rail.
M&L for malemine polishing of table dinning for 6 persons complete as shown on drg, as Specified and as directed.
ALMIRAH MED STEEL (FD-1032) Removing of old unserviceable locks and S&F new locks to steel Almirah best quality (as per existing size) as approved by GE complete all as per Drg and specified and directed..
All as per Srl item No 30 above but CP Handle
Removing of old unserviceable paints and repainting of steel Almirah medium with two coat of synthetic enamel paint in side and out side including preparation of surfaces complete all as per Drg and specified and directed.
CHAIR DINING (FD-1105 & FD-228) Removing of old unserviceable front leg replacing by new Shisham wood leg of 46 cm length, 45 x 45mm on top and 25 x 25mm at bottom with fine finish as per drg, as specified and as directed.
All as per Srl item No 33 above but rear leg 890 mm length, 25x25mm at bottom and 20 x 20 mm at top.
All as per Srl item No 33 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning
All as per Srl item No 33 here-in-before but back bottom of size 45x19x440 mm.
All as per Srl item No 33 here-in-before but stiffener of size 45x19x215mm.
M&L for malemine polishing of chair dinning complete all as per drg, as specified and directed..
Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.
CHAIR WRITING (FD-20, FD-202 & FD-250) Replacement of old unserviceable front leg by providing well seasoned Shisham wood free from shake and knots complete all as per drg, as specified and as directed.
All as per Srl item No 40 above but rear leg.
All as per Srl item No 40 above but side/front/rear rail of cane seat including making 3mm dia holes for re-canning
All as per Srl item No 40 above but back bottom of size 45 x15x 400 mm
All as per Srl item No 40 here-in-before but stiffeners of size 25 x19 x 500mm.
All as per Srl item No 40 here-in-before but arms.
M & L for malemine polishing of chair writing complete all as per drg, as specified and directed.
Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and as specified.
TABLE 900 X 600 X 760 MM WITH OR W/O DRAWERS ( FD-41, 55, 223, 224) Replacement of old unserviceable top by providing new 18/19mm thick block board commercial pasted with laminated sheet teak face 1mm thick including 3mm thick teak wood edging all round complete all as shown on drg as specified and as directed.
Replacement of old unserviceable leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, as specified and as directed.
All as per Srl item No 49 above but top long rail.
All as per Srl item No 49 above but top short rail.
All as per Srl item No 49 above but stiffener.
Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick block board at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing.
M&L for melamine polishing to table 900X 600X760mm without or with drawer complete all as specified, as directed and as shown on drawing.
TABLE CENTRE (FD-29, FD-152, FD-224 & FD-375) Replacement of old unserviceable top by providing new 18/19mm thickblock board commercial pasted with laminated sheet teak faced 1mm thick including 3mm thick teak wood edging all round complete all as per drawing, as specified and as directed
Replacement of old unserviceable legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and as directed and as specified.
All as per Srl item No 56 above but long rail.
All as per Srl item No 56 above but short rail.
M&L for melamine polishing to table centre complete all as shown on drg, as specified and as directed
TEAPOY (FD-34, FD-232 & FD-292, 278) Replacement of old unserviceable top by providing new top of 18/19mm thick block board commercial type pasted with laminated sheet 1mm thick teak faced including 3mm thick teak wood edging all-round complete all as per and as directed
Replacement of old unserviceable legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and as directed and as specified.
All as per Srl item No 61 above but long rail.
All as per Srl item No 61 above but short rail.
All as per Srl item No 61 above but stiffener .
M&L for melamine polishing to table Teapoy complete all as shown on drg, as Specified and as directed
TABLE BED SIDE (FD-276, FD-248) Removing of old unserviceable legs with Teak wood (MP) leg 40 x40mm reasonably seasoned free from shapes and knots complete all as shown on drg and spd.
All as per Srl item No 66 above but top fixing new top 12mm thick teak wood size- 450 x230mm wide complete all as per drg, as specified and as directed.
Removing of old unserviceable back 6mm thick plywood and fixing new 6mm thick plywood commercial complete all as per drg, as specified and as directed.
Removing of old UNSV Bottom teak wood and New bottom teak wood all complete all as per drg, as specified and as directed.
M&L for melamine polishing to Table bed side complete all as per drg, as specified and as directed
BED PLYWOOD TOP/ BED NEWAR (FD-245, FD-246, FD-247) Removing of old unserviceable head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood including 4 Nos FMN clamps and polishing complete all as specified as shown on drg and as directed
All as per Srl item No 71 above but foot board complete.
Removing of old unserviceable long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and as specified and as directed
Removing of old unserviceable top and S&F new top of 12mm thick ply wood commercial with screws complete all as directed as shown on drg and as specified
Removing of unserviceable stiffeners of chair wood (natural seasoned) of suitable size of making necessary grooves in long rail complete all as shown on drg as directed and as specified
S&F in replacement MS clamps of size 40mm width x4mm thick x 300mm long manufacturing in L shape incl 2 holes on both sides for fixing to locking the head/foot board with long rails complete all as specified and as directed
CHAIR VARANDAH (FD-256, FD-19) Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed (Painting to chair will be carried out before recanning)
S&F hard rubber shoes suitable for chair Varandah complete, all as specified and directed.
M&L for welding to Chair Vareandah where required n.exc 2.5cm in length complete all as specified and directed.
SOFA SET 3 PIECES FOR FIVE (ONE THREE SEATER & TWO SINGLE SEATER) (FD-258, FD-281 & FD-113) Supply of cushion covered 100 mm thick with best quality tapestry cloth for sofa set 3 pieces having sitting capacity for five (one three seater and two single seater )complete all as per drg, directed and specified (Make of cushion sleep well of 40 density ) Note:- (a) Tapestry cloth shall not be less than costing of Rs.200/- RM and shall be approved by GE . (b) The unit each set comprises of 10 No. cushions ( 5 for seats and 5 for back)
Removing of old unserviceable tapestry cloth and foam from back seat of sofa set and S&F new tapestry cloth and packing with 40mm thick foam complete all as specified and directed. Note: Tapestry cloth shall not be less than 200/- per RM and shall be approceed by GE
Supply of cover of cushion made out of best approved quality tapestry cloth complete all as specified and directed .Note:-Tapestry cloth shall not be less than Rs.200/- RM and shall be approved by GE.
BALWINDER SINGH AND SONS
M/S NEW SUBBERWAL FURNISHERS
M/S INDAN FURNITURE MART
G S Builders
om parkash and sons
Harson Enterprises
SEALINE BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .