For the Work of Business Plan 2024-25 Part-II Replacement of Jarjar 33 KV Line, Damage ABC, Making Plinth and Fencing etc., Under Sub-Station 33/11 KV Mohkampur in the area Under EUDD-V, Meerut.

Amount

Cartage of line Material from Central Store to JE store including loading & unloading at both ends.

Cartage of line Material from JE store to various site of work including loading & unloading at both ends.

Cartage of 13/11 mtr long ST/PCC pole from Central Store to JE Store including loading and unloading at both ends.

Cartage of 13/11 mtr long ST/PCC pole from JE Store to Various Site including loading and unloading at both ends.

Providing & Fixing 33/11 KV/ LT Line accessories as per site requirement

Dismantling of old pole , Back cartage to store and Erection of 13/11 mtr long ST/PCC with stone pad Complete in all respect.

Dismantling of old 33KV/11KV Cable/ conductor and Laying of Conductor

Dismantling of old 33KV/11KV Cable/LT Cable and Laying of 33KV/11KV/ LT ABC/ XLPE Cable

Providing of earthing rods and Earthing of poles with earthing rod and binding it with GI wire complete in all respect.

Providing and Fixing of ,Holding,Clamp for 33/11 kv site. (as per site requirement.)

Providing and Fixing Nut and Bolts off size.

Grouting of poles.

Providing & Fixing of G.I. Wire 8/6 SWG complete work in all respect.

Providing & Fixing of Clamp for 33/11 mtr. ST Pole

Providing & Fixing Distribution Box and connecting consumer cable accordingly to site requirment.

Dismantling and Laying of 33/11 KV XLPE cable of Double ckt for HT over head and under ground and back cartage to store

Laying of XLPE cable (under ground) in HDPE pipe

Providing & fixing of 33KV/11 KV Jointing kit O/D

Dismantling of old and damaged lugs at different Distribution TF and Providing & Fixing of Aluminium Lugs 250/400 KVA TF

Providing & Fixing of 33/11 KV fuse set

Dismantling of old and damaged Bus Bar and Providing & Fixing of Copper Bus bar 250/400 KVA TF for Douple/Triple Circuit to connect Tailless unit

Dismantling old and damaged Fuse Pati and Providing & Fixing of Copper Fuse patti of size 2/3 mm

Cartage of Trolly to work site and Fixing of Trolly to provide uninterrupted Electricity Supply during the maintenance work. After completion of work, back cartage of Trolly from work site to JE Store

Making a Chair Type structure with RS joist/rail pieces/ plinth of size suitable for 400/250 KVA T/F 3x2x1.0 m above ground level and 01 fit. Below ground level after digging of earth brick ballast shall be provided and remerging will be done properly after that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand will be made. The earth shall be filled upto 1 feet below the top of the plinth after this brick ballast shall be provided upto 6 from the earth level and proper remerging shall be done 1 no. jall of 12 mm shall be fixed in the hollow of plinth and four inches thick RCC in 1:2:4 ratio of cement, sand, stone ballast shall laid on the top of the plinth.

Making a fencing suitable for 250/400 KVA T/F Plinth. Including Providing, Fabrication and Fixing of wire mesh fencing frames of size 3.0x2.0x2.0 mm fabricate out of MS Angle iron of size 35x35x6 sq.mm having 02 No. legs of 15cm long in each frame duly welded and fixing with wire mesh of size 25x25x10 SWG hot dipped galvanized with in the frame pressed under MS flats of size 25x5 mm inside the angle on all four side with help of approx 20 No. bolt and nut of 10 mm diameter 15 cm legs of frame will be grouted in 1:2:4 cement coarse sand and 20 mm gauge stone ballast with paint with one coat of red oxide and two coat of aluminium paint of approved mark after proper cleaning.

Safely mounted 250/400 KV T/F on double pole structre/plinth and making jumpring and binding making all connection properly.

Water level earthing of neutral and body of Power/ Distribution transformers of 33/11KV transformers by boaring of earth upto water level and lowering of GI Pipe 32 mm dia upto water level and connecting the same by ms flate of size 40x4 mm with transformers. The transformer will be earthed properly including/cutting, jointing, welding etc. of MS Earth Strip and connecting one earthing with the neutral bushing of transformer and other to the body of transformer at several points. The GI Pipes will be connected to each other with the help of G.I. Sockets and a cap will be provided on the upper part of the G.I. Pipe for pouring of water during summer season./ chemical earthing

Providing & Fixing of Single/Double Tailless Unit as required

Fixing of 400/630mm XLPE Lead for Distribution Transformer

Providing & Fixing Channel/Angel as per site Requirement

BHARDWAJ ENTERPRISES (BID ID -4790333)

M/s Sigma Electricals (BID ID -4792928)