PROVISION OF COMPOUND WALL AROUND MES IB AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Excavating in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and not exc. 1.50 m in depth and getting out for hard and dence soil,complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 ( 40 mm graded aggreage ) as in foundation / sub base,complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3) (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3), (using 20mm gradded stone aggregate) as in Columns, pillars, piers, posts and struts,complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3), (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc,complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work,complete all as specified and as directed.

M&L for Formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work,complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc,complete all as specified and as directed.

Returning filling including Spreading and leveling with excavated earth including watering removing in layers not exc. 25 cm thick,complete all as specified and as directed.

Removing of excavated material not exec 50 m and depositing where directed at a level not exc. 1.50 m above the starting point,complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia and confirming to grade 410-O,complete all as specified and as directed.

All as per item no. 11 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc. 6m mean radius built in cm (1:6),complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on brick wall and finished even and smooth without using extra cement,complete all as specified and as directed.

M&L for applying two coats of cement base paint priming plastered and other surfaces with alkali resistant priming paint over newly prepared wall surfaces,complete all as specified and as directed.

M&L for Providing precast cement concrete (1:3:6) Type C0 (12.5mm gradded aggregate) louvres and jallies, 25 mm thick (measured solid), including all mould- ings setting in CM (1:6),complete all as specified and as directed.

M/S SINGH ENTERPRISE (BID ID -3188754)

M/S Subhadip Enterprise (BID ID -3188761)

M/S KUMAR AVINASH (BID ID -3187615)

M/S ASHA ENTERPRISE (BID ID -3188725)

LALAN SHARMA (BID ID -3188563)

M/S New Builders Corporation (BID ID -3188515)