REPAIR/MAINT OF STEEL FURNITURE OF VARIOUS UNITS AT JAISALMER MIL STATION UNDER GE ARMY JAISALMER.

Amount

REPAIRS TO ALMIRAH STEEL LARGE/ MEDIUM (FD-67M, 1031)

Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge.

S&F New 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Medium steel including removing the existing unserviceable lock complete all as specified and as directed by the Engineer-in-Charge.

S&F New steel cleats for supporting shelves in Almirah large/ medium steel including removing the existing unserviceable cleats complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable legs and S&F New leg of Almirah large steel made of 1.5mm/16 Gauge thick CRCA sheet bend to shape duly painted including one coat of red oxide primer and fix with Gas welding as shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.04 here-in-before above but leg of Almirah medium steel.

Removing unserviceable 3 way locking device from Alimarh large steel and fixing New locking device complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.06 here-in-before above but of Almirah medium steel.

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm for foot rest of almirah large steel by gas welding wherever required complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old painted surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.09 here-in-before above but for Almirah medium steel.

REPAIRS TO BED HARD TOP STEEL (FD/MAP/E6/08(R)

Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and applying one coat of synthetic enamel paint in Black colour oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable /broken ply wood top and supply and fixing New 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable shoe and S&F new PVC shoe in leg of Bed Hard as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

Removing existing Head Board of Bed hard steel and S&F new cushioned Head Rest of size 1150x900mm. The Head Rest Unit shall be made up of 38x38mm CRCA Square pipe of 18 gauge wall thickness. 18x18mm square CRCA pipe in the middle for support and 25x25mm square CRCA pipe at the bottom. The main bed frame where the Head board frame shall be bolted shall be 65x25mm CRCA pope. The Head Board frame shall be slightly bend at 70 degree as shown in the drg. The frame to be powder coated with black colour. The Headboard shall be fixed with 12 mm thick plywood of BWP grade and pasted with PU Foam 75mm thick 32 density duly covered with composite tapestry of leatherette chocolate or any other shade approved by GE. The cushioned headrest to be curved at the top. The complete frame unit to be bolted with the short rail main frame as shown in the drg complete all as specified and as directed by Engineer-in-charge.

REPAIRS BOOK CASE STEEL (FD-1028)

Removing unserviceable glass from shutters & S&F New sheet glass of 5mm thick, plain, ordinary glazing quality conforming to the requirement of IS: 1761 of size 870 X 380 mm all as shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable handle and S&F new chromium plated handle 100 mm long as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable lock and S&F new locks with duplicate keys all as per existing complete all as specified and as directed by the Engineer-in-Charge.

Preparing the existing steel surfaces by scrapping with sand paper and spray painting with one coat of synthetic enamel paint including removing the unserviceable rubber shoes and supply and fixing new of same size rubber shoes complete all as specified and as directed by the Engineer-in-Charge.

REPAIRS TO CHAIR VERANDAH (FD-359 & 256)

Removing the existing unserviceable/ plastic cane, from chair verandah and S & F new PVC Seat and Back made of PPCP material 4mm thick complete all as specified and as directed by the Engineer-in-Charge. Make : AMKO/SWASTIC/HARMONY

Preparing the existing steel surfaces and spray panting including one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah and including taking down old shoes and shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge..

REPAIRS TO CHAIR VERANDAH (FD/MAP-II/06)

S&F New PVC seat made of PPCP material 4mm thick of Chair Verandah MAP including taking down the old worn out /broken seat complete all as specified and as directed by the Engineer-in-Charge. Make : AMKO/SWASTIC/HARMONY as approved by GE.

S&F New PVC Back made of PPCP material 4mm thick of Chair Verandah MAP including taking down the old worn out /broken Back complete all as specified and as directed by the Engineer-in-Charge. Make : AMKO/SWASTIC/HARMONY as approved by GE.

Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes and shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge.

REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220)

Removing the existing unserviceable ply wood from GI charpoy and S&F 12mm thick plywood, BWP grade, conforming to IS :710 ISI marked alongwith two angle iron stiffeners 900x25x3mm with 10 Nos Nut Bolt complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE.

Removing the existing unserviceable / broken long rail 32mm dia and S&F New long rail for charpoy GI Pipe medium grade complete all as specified and as directed by the Engineer-in-Charge.

Preparing short rail from broken long rail obtained from Serial item No 6.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail complete all as specified and as directed by the Engineer-in-Charge.

Preparing leg of GI Charpoy made from old long/short rail obtained from Serial item No 6.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing complete all as specified and as directed by the Engineer-in-Charge.

S&F GI 3 way elbow 32mm bore, ISI marked, length not less than 65mm in each way including dismantling of old GI elbow complete all as specified and as directed by the Engineer-in-Charge. .

S&F GI check nut, 5mm thick suitable for 32mm GI pipe (ISI Marked) including dismantling of unserviceable check nut complete all as specified and as directed by the Engineer-in-Charge.

CHAIR CB STEEL WITH ARMS (FD-75M)

Removing the existing unserviceable/ broken seat for chair CB steel with arms and S&F New Seat of size 450 x 390 mm complete with frame made out of 12mm thick plywood duly pasted with 75mm PU Foam covered with tapestry Jute pattern dark brown/Red/Choclate colour not less than Rs. 250/RM . The seat frame to be bolted to the MS tublar frame of the chair by four 75mm long screw complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 7.01 here-in-before above but for back of chair CB steel with Arms.

Removing the existing unserviceable/ broken Arm rest for chair CB steel with arms and supply and fix new Arm rest of size 420 X 50 X 20mm 1st class hard wood made to complete all as specified & shown on drg including french polishing to exposed surfaces complete all as specified and as directed by the Engineer-in-Charge. Note :- Each Arm rest measured separately

S&F MS plate of size 50mm X 20mm X 4 mm thick duly welded on two seat pipe for support to seat of chair CB steel complete all as specified and as directed by the Engineer-in-Charge.

Preparation of steel surfaces of chair tubular steel with arms and applying two coats of synthetic enamel paint of approved colour complete all as specified and as directed by the Engineer-in-Charge.

CHARPOY HARD TOP (FD/MAP-II/01 )

Removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightening of MS Pipes thereafter preparation of old surface by sand paper No 50 and wire brush and applying one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable /broken ply wood top and S&F New 12mm thick BWP plywood conforming to IS: 710 top ISI marked alongwith countersunk screws bolted on the stiffeners 10 in Nos all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE.

REPAIRS TO CHAIR WRITING OFFICERS (FD/E6/MAP/12)

Removing the existing unserviceable PVC arm rest and S&F New PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable Seat of chair writing and Supply and Fix new Seat moulded with 75mm thick polyurethane foam(PU) 50-55kg per cubic metre density and hardness pasted over 12mm hot pressed plywood BWP Grade conforming to IS : 710 and duly covered with tapestry cloth/fabric not less than 250/- per RM complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable Seat of chair writing and Supply and Fix new Back moulded with 75mm thick polyurethane foam(PU) 50-55kg per cubic metre density and hardness pasted over 12mm hot pressed plywood BWP Grade conforming to IS : 710 and duly covered with tapestry cloth/fabric not less than 250/- per RM complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable shoe of chair writing and S&F new shoe of chair complete all as specified and as directed by the Engineer-in-Charge.

Table Bed side (FD/E6/MAP/15R)

Removing the existing unserviceable handle of Table bedside & S&F new 100 mm long aluminium Handle complete all as specified & shown on drg complete all as specified and as directed by the Engineer-in-Charge. .

S&F in repair Telescopic channels powder coated in the drawers of the table bed side complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old painted surface of conduit pipes No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat synthetic enamel paint by spray painting of black colour and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. .

Removing unsv any side of table bedside and S&F New side of size 450mmx450mm 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be Chocolate/Mehogany/Wall nut chest shade to be approved by GE before bulk manufacture complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable square pipe and supplying and fixing new 18mm wide square pipe of 1.8mm thick wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge.

TABLE COMPUTER (FD/E6/MAP/03) & Table composite DGS&D

Removing the existing TOP of table computer 900x600mm and S&F new top of same size made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing TOP of table composite 1200x600mm and S&F new top of same size made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing any kind of unserviceable MDF Board Shelf and S&F new shelf of size 450x300mm made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable existing keyboard tray of table computer and Supply and Fix new key board tray of size 480mmx300mm duly made up of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable drawers of table computer and Table composite and S&F new drawer of size made up of 12 & 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade or as per existing all as directed by GE/Engr-in-Charge as following:- (a) Front of size 230x130mm 18 mm thick. (b) Sides of size 300mmx90mm 12 mm thick. (c) Powder coated Telescopic channels two in nos 300mm long (d) Bottom size of 300mmx175 12 mm thick (d) Drawer End of size 140mm x 90mm 18 mm thick

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of table computer by gas welding wherever required complete all as specified and as directed by the Engineer-in-Charge.

TABLE DINING ORS STEEL (FD-165M)

Cleanliness/Preparation of surface and painting of complete lower M.S frame and applying two coat of synthetic enamelled paint of black colour complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable Top of table and S&F New top of size 1800x600x18mm made out of 18 mm thick plain MDF board exterior grade confirming to IS:14587: 1998 covered from all side with Aluminium sheet 22 gauge thick covered all-round, top fixed with steel screw of required size complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable PVC shoe and S&F New PVC shoe suitable for MS pipe 25mm square complete all as specified and as directed by the Engineer-in-Charge.

TABLE OFFICE OFFICER/ CLERK/ TYPIST STEEL (FD-84/1004/1003)

Removing the existing unserviceable/ broken top of steel table office offrs and S&F new table top of 1370 X 760 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ broken top of steel table office clerk and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ damaged drawers of table office offrs steel/ table clk steel and S&F New drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable lock and S&F New brass lock of 50mm 4 lever with duplicate keys complete all as specified and as directed by the Engineer-in-Charge. Make :- Harrison/Link/Godrej as approved by GE.

Preparation of old painted surfaces of tables internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even applying one coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. .

S&F in repair 8mm plain glass 1370 X 760 mm of duly grinded and finished in all aspects acomplete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 8mm plain glass 1220 X 600 mm of duly grinded and finished in all aspects acomplete all as specified and as directed by the Engineer-in-Charge.

Supply only green baize cloth of size 1950x1200mm of not less than 250/-per RM on the table complete all as specified and as directed by the Engineer-in-Charge.

Supply only baize cloth of size 1500x900mm of not less than 250/-per RM on the table complete all as specified and as directed by the Engineer-in-Charge.

TABLE (900x600) STEELWITHOUT/WITH DRAWER (FD-1007/1008)

Removing the existing unserviceable/ broken top of steel table and S&F new table top of 900 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ damaged drawer of table 900x600 and S&F New drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable lock and S&F New lock of size 65mm 6 lever with duplicate keys complete all as specified and as directed by the Engineer-in-Charge. Make :- Harrison/Link/Godrej as approved by GE.

Preparing steel surface of table and applying one coat of synthetic enamel paint by spray painting as per shown on drawing and complete all as specified and as directed by the Engineer-in-Charge.

Teapoy verandah (FD-383/FD/E6/MAP/17)

Removing the existing unserviceable top and S&F 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade of size 450mmx450mm with 2 mm thick PVC edging all round complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.

Preparing old painted steel surfaces of frame and applying one coat of black synthetic enamel paint including removing the unserviceable rubber shoes and S&F New of same size rubber shoes complete all as specified and as directed by the Engineer-in-Charge.

Repairs to Trestle store room Iron (FD-86M)

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm on frame of Trestle store room Iron by arc welding wherever required complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old painted surfaces of trestle No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even and applying a coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

B.S Constructions (BID ID -3219143)

RK STEEL FABRICATORs (BID ID -3217672)

M/S Tanisha Traders (BID ID -3220629)

JANGID BUILDERS (BID ID -3221290)