Supply, Installation, Testing and Commissioning (SITC) of LED lights with replacement of old conventional lights at Mansarovar Metro Depot of JMRC

Amount

Supply of 36W 2x2 LED Recessed Luminaires with Input Voltage AC 240V, 50Hz Operating Voltage 140V-270V, Surge Protection 4KV with Color temperature 6500K ANSI BIN, Lumens >125 Lm/W, System Efficacy: Min 4000 Lumens, (Supported by LM79 Report) suitable for armstrong/grid ceiling including electronic driver with Diffused Optics PMMA Diffuser (600x600x60mm) which provided soft-light, Housing: CRCA white Powder Coated, Power Factor >0.95, CRI>80, THD<10% Luminaries and Driver make should be same, Fitting and driver both having separate BIS certificate required. Manufactures Work Mark/Name Engraved/Embossing /Screen Printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificates/Report from OEM shall be submitted.

Providing of perforated Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.5mm thick Galvanized Iron with beveled edge of 4.15mm width height of 32mm. The tiles shall be perforated to 1.5mm dia with open area of 23%. The tile will be manufactured on advanced equipment that includes several leveling stages in the manufacturing process by approved manufacturers. Tile ends will be raised with pips and slops to ensue positive engagement into the spring to enable for de-mounting of individual panels. The tile sides will be sufficiently high to ensure a minimum deflection across the length of tile.

Supply of 18W LED Recessed Downlight with Input Voltage AC 240V, 50Hz Operating Voltage 140V-270V, Surge Protection 2.5KV with Color temperature 6500K ANSI BIN, System Efficacy: Min 1800 Lumens, (Supported by LM79 Report) suitable for armstrong/grid ceiling including electronic driver with Diffused Optics PMMA/PC Diffuser which provided soft-light, Housing: Pressure Die Cast Aluminium, Power Factor >0.95, CRI>80,THD <15% Luminaries and Driver make should be same Make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 18W-24W LED Surface Downlight suitable for 300mmx300mm cutout with Input Voltage AC 240V, 50Hz Operating Voltage 140V-270V, Surge Protection 2.5KV with Color temperature 6500K ANSI BIN, System Efficacy: Min 1800 Lumens, (Supported by LM79 Report) suitable for armstrong/grid ceiling including electronic driver with Diffused Optics PMMA/PC Diffuser which provided soft-light, Housing: CRCA, Power Factor >0.95, CRI>80, Luminaries and Driver make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 36-40W 1x4 LED Surface Luminaires in CRCA Housing with Diffuser: PMMA/PC Type with Input Voltage AC 240V, 50Hz Operating Voltage 140V-270V, Surge Protection 4KV with Color temperature 6500K ANSI BIN, System Lumens: min 4000, (Supported by LM79 Report) suitable for armstrong/grid ceiling including electronic driver with Diffused Optics PMMA Diffuser, Power Factor >0.95, CRI>80, THD<10%, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 18-20 Watt Weather Proof Box Type Fixture in High Grade Polycarbonate Housing and PC Diffuser, Toggles : SS Type, LED Tube: Voltage AC 240V, 50 Hz Operating Voltage Range 160V-270V,IP65 Surge Protection >2.5KV, with colour Temperature of 6500K ANSI BIN more than 2100 Lumens, High Translucent serrated milky white diffuser, Power Factor >0.95, CRI>80,THD<10% Luminaries and Driver make should be same make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 36-40 watt Weather Proof Box Type Fixture in High Grade Polycarbonate Housing and PC Diffuser, Toggles : SS Type, LED Tube: Voltage AC 240V, 50 Hz Operating Voltage Range 160V-270V, IP65, Surge Protection >2.5KV, with colour Temprature of 6500K ANSI BIN more than 2100 Lumens, High Translucent serrated milky white diffuser, Power Factor >0.95, CRI>80,THD<10% Luminaries and Driver make should be same Make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 20W LED Tunnel Light comprises of Die Cast Aluminium with PC Cover, CCT: 5700L ANSI BIN, Surge Arrestor: 5KV, Operating Voltage: 140-270V, System Efficacy: Min 2100 Lumens, Protection: IP67 with IK10 Mechanical Protection, Power Factor >0.95, THD<10%, Mounting System: Cradle (360 Degree Rotation) with vibration Damping Mechanism, Maintenance: Top Cover, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of Box Type Fixture Suitable for Single LED Tubes in CRCA Housing, LED Tube: Max 18W/20W LED Tube, Double Side Connection, Voltage AC 240V, 50 Hz Operating Voltage Range 160V-270V, Surge Protection >2.5KV, with colour Temperature of 6500K ANSI BIN, min 2100 Lumens per LED Tube of IP20, Min ITHD <10% and VTHD <5%, , High Translucent serrated milky white diffuser, Power Factor >0.95, CRI>80,THD<10% Luminaries and Driver make should be same make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of Box Type Fixture Suitable for two LED Tubes in CRCA Housing, LED Tube: Max 18W/20 W LED Tube, Double Side Connection, Voltage AC 240V, 50 Hz Operating Voltage Range 160V-270V, Surge Protection >2.5KV, with colour Temperature of 6500K ANSI BIN, min 2100 Lumens per LED Tube of IP20, Min ITHD <10% and VTHD <5%, Burning Hrs 50000 Hrs, High Translucent serrated milky white diffuser, Power Factor >0.95, CRI>80,THD<10% Luminaries and Driver make should be same Make, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 120W LED High Bay with IP Lens Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: min150 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have at least thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >88%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz . The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, All Screw of the luminaries should be SS304 Grade, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 80W LED High Bay with Toughened Glass Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: >110 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have at least thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >85%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, All Screw of the luminaries should be SS304 Grade, Luminaire shall be embossed or screen printed manufacturer Name/logo, Fitting and driver both having separate BIS certificate required.

Supply of 35-40W LED Post Top nin a single piece construction with PC Clear Frosted Diffuser & Spun Aluminium Reflector, Housing: Aluminium Alloy powder coated in graphite grey, System Efficacy: Min 4000 Lumens, Reflector: Al Bright anodised with sand blast, Surge Protection: 5KV, IP 65 Protection, CCT: 6500K ANSI BIN, Power Factor >0.95, THD<10%, 360 Degree Illumination, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 30W LED Well Glass with IP Lens, System Efficacy of the Luminaries: >120 Lm/W, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have atleast thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >85%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, All Screw of the luminaries should be SS304 Grade, Luminaire shall be embossed or screen printed manufacturer Name/logo, Fitting and driver both having separate BIS certificate required.

Supply of 150W LED High Bay with IP Lens Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: min 150 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have at least thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >88%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, All Screw of the luminaries should be SS304 Grade, Luminaire shall be embossed or screen printed manufacturer Name/logo, Fitting and driver both having separate BIS certificate required.

Supply of 150W LED High Bay with IP Lens Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: m in150 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have at least thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >88%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, Luminaire shall be embossed or screen printed manufacturer Name/logo, Fitting and driver both having separate BIS certificate required.

Supply of LED Street Light Max 60W with Toughened Clear Glass Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: >120 Lm/W, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be preferably in separate compartment other optical compartment and Driver Compartment should be top opening. The LED driver shall be constant current type potted Driver will asphalt/silicon based compound shall be provided for all Luminaries It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Total harmonic distortion shall be <10% with power factor min 0.95. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, I The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Supply of 100W/120 W LED Flood Light with Toughened Clear Glass Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: >110 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have atleast thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The driver shall have an efficiency >85%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz . The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, All Screw of the luminaries should be SS304 Grade, Luminaire shall be embossed or screen printed manufacturer Name/logo, Fitting and driver both having separate BIS certificate required.

Supply of 180W LED Flood Light with Toughened Clear Glass Pressure Die Cast Aluminium Housing with Mandatory Secondary optics, System Efficacy of the Luminaries: >110 Lm/W, Beam Angle 60 Degree, CCT : 6500K ANSI BIN, CRI>70, LED Source: 1-5W High Power LED Type, Driver of luminaire shall be placed in separate compartment other than optical compartment. The LED driver shall be constant current type potted Driver shall be provided for all Luminaries The potting material should have atleast thermal conductivity of 0.8W/mK. It should be moisture resistance and should be fire retardant At least industrial grade or higher-grade components should be used for manufacturing of Driver. The driver shall be able to withstand surge (EFT+ESD interference) of minimum 4KV with a rise time of 20 Microseconds. Luminaire shall have surge protection devices of minimum 10KV inside the Driver compartment. The driver shall have under voltage, over voltage and short circuit protection and auto recovery mode. Output Ripple Current content shall be <10% on load. Output voltage ripple shall be within 3%. Total harmonic distortion shall be <10% with power factor min 0.95. The LED driver should comply to CISPR 15 for limits and method of measurement of Radio Interference Characteristics. The driver shall have an efficiency >85%. It should give consistent performance in the input voltage range of 120V-270V at 50 Hz. The driver shall be able to withstand for Indoor and 440 V for 8 hrs The driver should have facility and cut off voltage. Input over voltage protection will be >300Vac and for lower cutoff the Luminaires should withstand for 48 Hrs at 100 Vac, It shall have an SDCM (standard deviation in colour maintenance) <5, The LED efficacy shall be more than 85% at a junction temperature of 85⁰C, IP66 & IK08, Fitting and driver both having separate BIS certificate required. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.

Providing & Fixing of energy efficient direct fit (Retrofit) AL housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. Min. Lumens output 1800 lm LED Tube rod with AL Housing.

Installation, Testing & Commissioning of existing LED lights (at Sr. no. 1 and 3 to 20 of BOQ) including making interconnections with suitable sized copper flexible wires, hard wares etc as required with dismantling of old conventional lights and handing over to JMRC etc. as required.

M/s Prakashpuri Electircal Engineering Co.

M/s. Varshit Electricals Pvt. Ltd., Jaipur