25 H(F)(W)/2022-23

Amount

Carriage including loading, unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 40 Kms. (distance approx)

S.T. Pole 11 Mtr. long

PCC Pole 8.5 Mtr. Long

11KV XLPE cable 3x70 sq.mm

ACSR Weasel Conductor

11 KV Cable Jointing Kit 3x70 sq mm outdoor

11 KV Cable Jointing Kit 3x70 sq mm Indoor

11 KV Staright Through Cable Jointing Kit 3x70 sq mm

Transformer 25 KVA

Transformer 100 KVA

11 KV TVM Meter

11 KV Pilfer Proof Meteing Cubical

Other matching Materials

Dragging of S.T./PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Double Pole Support on PCC Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support on PCC Pole 8.5 Mtr. including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Earthing of Poles as per RESPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Laying of underground 11 KV 3x70 sq mm XLPE Cable (Double Circuit) in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging Hosting & clamping and G.I. Pipe channel nut & Bolt 3 x70 mm2 XLPE 11 KV cable (cost of all accessories will be borne by contractor) as per RESSPO Norms

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x70 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x70 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x70 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Stringing, Sagging, binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Supply and Fixing of G.I. Pipe 6'' dia

Mounting of 25 KVA Transformer as per RESPO Norms

Mounting of 100 KVA Transformer as per RESPO Norms

Construction of Plinth of 100 KVA Transformer including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth 100 KVA with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Installation and Fixing of 11 KV Pilfer Proof Metering Cubical

Installation and fixing of 11 KV TVM Meter

M/S BALAJI ENTERPRISES