Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹17.5 L+₹4.1 L (30.3%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹17.1 L
EMD Value
₹34,280
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Leh
GE (AF) Leh PIN 194101
PROVN OF CERTAIN MINOR AND REVENUE WORKS OF E M NATURE AT AF STN LEH UNDER GE AF LEH
2023_MES_611083_1
GE (AF) /LEH/T-44/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Leh
As per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Leh
₹34,280
Yes
11 Dec 2023
28 Jul 2023
4 Sept 2023
28 Jul 2023
31 Aug 2023
12 Aug 2023
Amount
M&L for maintenance free chemical earthing system complete with UL464 approved copper bounded earth rod 17mm dia 3mm dia 3 mtrs long electrode buried in ground to bore holes 150mm dia. Vertically to a depth not less than 0.50 mtr below normal ground level including Provision to connect the earth continuity conductor with copper bounded earth rod as per manufacture design or all as directed including 6 kg NABLLAB certified back fill chemical compound for filling bore bole with min 6 kg of Hygroscopic Gel. The ground enhancement chemical my be used in place of back fill compound as required and chemical may be used in place of back fill compound as required and manufacture recommendation to obtain below 1.0 ohms earth resistance value. A layer of 250-300mm soil (vegitable/cotton soil) is also required outside earth bore including necessary ingradients and water during process botain desired value. The earthing strip of size copper 20x3mm up to length of 7.5 mtr up to test point from copper rod is also included test point terminal block should be made of Gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm long hexagonal head screw complete. The scope indlude iron frame of size 20x20mm fixed with hinged with Pit cover of 300mmx300mm made of cast Iron as per company standard shall be as recommended buy manufacture complete all as specified. Make-JMV/Pargati electrocom/Enove Note : (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has to make alternate earthing in case test result not found satisfactory without any extra cost and rate should include the cost of that provision of earthing. (ii) Contractor shall submit 1 years guarantee for earth resistance below 1 ohms and earth neutral voltages less than 1 volts.
M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galavanised iron strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to outdoor LT panel or bus bar all as specified including earth work in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, complete all as specified and testing on completion.
Material and labour for Copper Strip of 20 x3.0mm to interconnect the earth pit to Equipment Room etc including PVC saddles as per sample approved complete all as specified and directed by Engr-in-Charge
Supply and fixing aluminium strip of size 25 x3.15 mm with PVC shaddle and fixing screws etcfor roof and down conductor above ground level complete all as specified and directed by Engr-in-Charge.
Material and labour for test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hax. head screw complete all as specified and as directed by Engr-in-Charge.
Material labour and labour for elapp brass copper lightning arrestor 9.2mm diameter and 915 mm in in legth and Elapp epoxy electrical insulator (red) screwed properly on copper strip complete all as specified and directed.
Material and labour for point wiring in steel conduit unsheathed multistrand copper conductor cable of 1.5 sqmm single core FRLS for one light/fan point controlled by one flame proof switch including continuouse earth continuity copper earth wire of same size connected to common earth dollycomplete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.
Material and labour for point wiring in steel conduit unsheathed multistrand copper conductor cable of 2.5 sqmm single core FRLS for 15mm flame proof socket point controlled by one flame proof switch including continuouse earth continuity copper earth wire of same size connected to common earth dollycomplete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.
S&F LED flameproof light fitting 1 x 20 Watts, CIMFR approved and recommended for gas/vapor group of IIA & IIB, Zone 1 & 2 and IP65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures, driver, holder, connector etc. complete with all accessories pre-wired and including connecting up with three core flexible copper conductor wire of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F Switch flame proof rotary type with termination box in LM6, 16 Amps, single pole 250 volts. Make : Sudhir Switchgears or equivalent
S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts.
S&F Flame proof SPN DB 4 way 240 V having 200 A rated bus bars with 32 Amps SPN MCB-01 No and 16-32 Amps SP MCB's - 02 Nos complete all as specified and directed by Engr-In-charge. Make : Sudhir Switchgears or equivalent.
S&F Flame proof SPN DB 8 way 240 V having 200 A rated bus bars with 32 Amps SPN MCB-01 No and 16-32 Amps SP MCB's - 06 Nos complete all as specified and directed by Engr-In-charge. Make : Sudhir Switchgears or equivalent.
S&F Flame proof TPN DB 4 way 240 V having 200 A rated bus bars with 63 Amps TPN MCB-01 No and 16-32 Amps SP MCB's - 12 Nos complete all as specified and directed by Engr-In-charge. Make : Sudhir Switchgears or equivalent.
S&F flameproof exhaust fan of size 450mm sweep including lowers with IP-66 protection, complete with all accessories pre-wired and connecting up with twin core twisted flexible copper conductor wire of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F flameproof exhaust fan of size 300mm sweep including lowers with IP-66 protection, complete with all accessories pre-wired and connecting up with twin core twisted flexible copper conductor wire of suitable size complete all as specified and as directed by Engr-in-Charge.
M&L Sub-main wiring with two single core 04 Sqmm (nominal area) PVC insulated copper conductor FRLS, multi-stranded, unsheathed 1100 volts grade in PVC Casing Caping including 2.5 Sqmm copper conductor cable FRLS as earth wire, complete all as specified. Make of cable :- Finolex, Polycab, Anchor NOTE : 2 Run of 04 Sq mm and 01 run of 2.5 Sqmm copper conductor cable including 01 Run of PVC Casing Caping with necessary accessories shall be measured as One Unit.
Material & labour for cutting openings, through brick/stone walls built in cement mortar for exhaust fans of 300mm sweep and other openings, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m, including forming jambs in CM 1:4 and making good to match existing wall finishes, complete all as specified and as directed.
Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents
osho traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .