PROVISION OF MES OFFICE BUILDING AT CG OTM COMPLEX, VIJAY NAGAR, HUTBAY

Amount

SCHEDUEL 'A' PART- I TO IX NOTES: Schedule ‘A’ Part- I to IX are prepriced by MES under Ser No. 1.00 to 9.00. Bidders shall insert their lump sum amount in the Green coloured field under Col-6 only.

Lump sum price worked out by the tenderer for "Building/Structures" as listed in Schedule 'A' Part-I

Lump sum price worked out by the tenderer for "Excavation, Earth work, site clearance and Land Development" as listed in Schedule 'A' Part-II

Lump sum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-III

Lump sum price worked out by the tenderer for "Internal Water Supply" as listed in Schedule ‘A’ Part-IV

Lump sum price worked out by the tenderer for "External Electric Supply" as listed in Schedule ‘A’ Part-V

Lump sum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-VI

Lump sum price worked out by the tenderer for "Roads, Path and Culvert" as listed in Schedule ‘A’ Part-VII

Lump sum price worked out by the tenderer for "Sewage Disposal " as listed in Schedule ‘A’ Part-VIII

Lump sum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-IX

Subtotal

NOTE: Schedule ‘A’ Part - X is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

SCHEDULE `A' PART - X (MISC ITEMS)

Internal Water Supply

Supply and fix Health Faucet chromium plated with 1.5m length pipe complete all as specified and as directed Make : Prayag or Parryware or equivalent.

Internal Electrification

Supply and fix Telephone cable 5 pair, Make: Havells, cat no:WHTTATEA5P50 or equiv in Finolex

Supply and fix Coaxial TV cable, RG-6 with less signal losses Make: Havells, Cat no:WHOJTTKARG06 or equiv in Finolex

Supply and fix telephone socket RJ-11, with shutter 1 module all as directed. Make: Havells, Cat No:ACMKRWW111 or equiv in Finolex

Supply and fix TV coaxial socket,1 module all as directed. Make: Havells, Cat No:ACMKTWWW000 or equiv in Havells/ Finolex

Supply and fix ultra slim elegance LED lighting fixture with extruded AL heat sink, integrated electronic driver, 10 watts , 5700K(2ft) Energy Efficient and environmental friendly, all as directed by the engg-in-charge. Make : Havells, Cat No ENDURA LINEAR NEOBS10WLED865SPCWH or equivalent of Crompton/ Philips/Wipro.

Supply and fix ultra slim elegance LED lighting fixture with high efficacy (105lm/w), 20w,CDL with Aluminium housing all as directed by the engg-in-charge. Make : Havells, Cat No ENDURALINEARNEOBS20WLED865SPCWH or equivalent of Philips/Crompton

Supply and fix Building security light fittings 25W LED 6K, pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP65 protection and impact resistance of IK0 with IP 65 protection including suitable size of GI Pipe made to shape and fixing to the wall, with the use of nut and bolts, making connections from ceiling rose. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPC or equiv in Wipro/Philips.

Supply and fix fan exhaust of sweep 250mm, PVC type, single phase with their all accessories fixed properly on wall surfaces including connecting/testing complete as directed. Make: Havells, Code: Ventil Air-DX-White or equivalent in Usha/Almonard Note for Item No.26 & 27:- The cost of making holes for fixing exhaust fans is inclusive in rate.

Supply and fix ceiling fan 1200mm sweep, 5 star rated, 230V, complete including all accessories. Make: Havells, Cat no: ES-40 or equivalent in Bajaj/Crompton/ Luker

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4way, double door SP & N, 240 Volt. Cat No-DHDNSHODDW04 Make: Havells or equivalent in Standard/L&T/Indo Asian.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8way, double door SP & N, 240 Volt. Cat No-DHDNSHODDW08 Make: Havells or equivalent in Standard/L&T/Indo Asian.

Supply and fix TPN DB vertical 4 way with TPN MCB incoming and MCB Outgoing, 415 V .Make: Havells, Cat No:DHDNTHODDW04 or equivalent in legrand/ Standard

Supply and fix MCB TPN, 4 pole 63A, C series 415 V, 50 Hz Make: Havells Cat No: DHMGCTNF063 or equivalent in Legrand/ L&T/ Standard

Supply and Fix Miniature circuit Breakers, single pole, C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA. Make : Havells Cat No- DHMGBSPF006-032 or equivalent in Standard/L&T/Indo Asian.

Supply and Fix Miniature circuit Breakers, SP&N, C-Series 240 Volts of capacity (40 Amps) as ordered breaking capacity 10 KA. Make- Havells Cat No - DHMGCSNF006-032 or equivalent in Standard/L&T/Indo Asian.

Material and labour for earthing complete with galvanized steel plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4sqmm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore light grade GI protection pipe (7.5mtr long) for earth including PCC (1:2:4) type B1 chamber pit with pre cast RCC(1:2:4) type B1, 40mm thick reinforced with steel wire 6 mm dia MS bars @ 100 c/c both way lifting hooks made out of 6 mm dia MS bars, watering arrangement with 20mm dia medium grade GI pipe & funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: If necessary earth resistance value is not obtained after testing the contractor should do fresh earthing free of cost.

External Electrification

(i) Supply and fix solar street light fitting 25 watts having high lumen efficacy, including inbuilt solar panel and long life maintenance free lithium ferro phosphate battery, micro controller based integrated MPPT charge controller with driver. The fitting shall be of Make Crompton Cat No.CSADMP25CDL or Equivalent from Philips/ Bajaj connection from ceiling rose by providing flexible 3 core, 1.5 Sqmm PVC cable with stranded copper conductor. (ii) Supply & fix HDGI Hexagonal/octagonal pole 5 meter having top dia 70 mm and bottom dia 135 mm and thickness 3 mm, including GI heavy duty light mounting bracket with nuts & bolts, 4 nos 'J' type foundation bolts of dia 16 mm and 450 mm long with base plate. (ii) Excavation in post holes not exceeding 0.5 cum for erection of poles, removing the excavated materials to distance not exceeing 50 meter and providing PCC bed and RCC foundation as per follwoing specification including form work. (i) PCC BED 450 mm x 450 mm 100 mm. (ii) RCC Colum - 400 mm x 400 mm x 1300 mm M 20 Design, using 4 Nos - 12 mm TMT Bars.

M&L for earthing complete with galvanized steel plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore light grade GI protection pipe (7.5mtr long) for earth including PCC (1:2:4) type B1 chamber pit with pre cast RCC(1:2:4) type B1, 40mm thick reinforced with steel wire 6 mm dia MS bars @ 100 c/c both way lifting hooks made out of 6 mm dia MS bars, watering arrangement with 20 mm dia GI medium grade pipe and funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: If necessary earth resistance value is not obtained after testing the contractor should do fresh earthing free of cost.

Supply, Installation, testing and commissioning outdoor cubical feeder pillar suitable for 3 phase, 4 wire 415 Volts ,50 Hz supply system with suitable size powder coating provided with suitable to make it dust/Vermin proof .The panel shall be made with 3.15 mm thick CRCA sheet for outer shell and inner shell made out of 2 mm thick CRCA sheet, double door with front and back open able with locking arrangement, provision of threaded earthing stud at bottom, inner shell completely vermin proof and to accommodate incoming/outgoing MCCBs MCB,s and TPN aluminum bus and extension links of rating not less than 1.5 times the rate of capacity of the respective MCCBs. The TPN busbar and extension links shell be insulated with colour coated heat shrinkable sleeve and shall be mounted on epoxy resin insulators . All control wires shall be with 2.5 Sqmm mulitstranded adequate size of lugs .The panel shall be mounted on 50 x50x5 mm angle iron stand of height 45cm above ground level and 45cm embedded in ground, computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull be provided. the panel shall be consist of the following accessories :- (i) Incoming- MCB TPN 63 Amps-01 No & (ii) Out going - SPN 20 Amps-03 Nos all as specified and directed.

Site Development

Supply only white moorum / approved earth obtained from location at Little Andaman with a lead of 15 Km to 125 Km from Vijay Nagar, Hutbay, getting and transporting the same ICGS land at Vijay Nagar and stacking all as specified

Subtotal

P NAIDU