8422/GE/PAF-46/2023-24

Amount

Dismantling plain corrugated asbestos /translucent sheet in roof covering including ridges complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge.

Supply and Fixing for Framed work as in doors or gates of angle or other section with gusset plates,rails,braces ,etc.,complete drilled for fixing of steel sheeting or other covereing.Doors,etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming FE-410-W (Gde E-250) Quality B complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc confirming FE-410-W (Gde E-250) Quality B complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing MS plates plain or chequered square cut or notched forming holes drilled or welded any thickness confirming FE-410-W (Gde E-250) Quality B complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface, work in soft disintergreted rock complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for 1:4:8 type D2 using 40 mm graded aggregate as in foundatition filling or mass concerete complete all as specified and as directed by the Engir- in- Charge.

Taking down cement plaster on brick wall upto any height and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour 5 mm thick cement plaster in cement mortar 1:3 on celings, surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for preparation of new plastered surfaces and applying two coats of exterior acrylic paint of any shade in comouflaged pattern as approved by GE as per manufacturers instruction complete all as specified and directed by engineer in charge.

Material and Labour for Preparation new surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for Preparation new surfaces of ceilings and a applying two coats of white wash complete all as specified and as directed by the Engir- in- Charge.

Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed by the Engir- in- Charge.

Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) exc 1.5 sqm but ont exc 4 Sqm each complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engir- in- Charge.

Providing and fixing factory made uPVC white colour casement (Openable) Door made with 3D hinges made of (Big series) frame size 60x58 and sash (67mm x 110mm) and and both having wall thickness of 2.3 +- 0.2mm and single glazing bead of appropriatea dimsion (area updoor up to 2.00 sqm mtr comprising of uPVC mutlichambred frame , sash and mulion (whereever required) . Extruded profiles duly reinforced with 1.6+- 0.2mm thick glavangaded mild steel section made from roll forming process of required lenght (shape and size according to uPVC profile), uPVC extruded glazing bits of the appropriate dimension , EPDM gasket , zinc alloy ( white powder coated 3D hinges and one handle of each side of pannels alongwith zink plated mild steel multi point blocking having transmission gear , cylinder with keeps and one side key 8mm x 100mm long GI fasteners for fixing frame to finished wall and stainless steel screwsetc profile of frame & sash shall bealso fusion welded including drilling of holes for fixing hardwere;s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of spproved quality complete all as specified and directed by Engineer - in - charge (Glass shall be paid separately) Note: For uPVC frame ,sash and mullion extruted profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be accpatble . Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by the Engir- in- Charge.

Providing and fixing factory made uPVC white colour casement (Openable) Door made with 3D hinges made of (Big series) frame size 88x58 and sash (67mm x 110mm) and and both having wall thickness of 2.3 +- 0.2mm and single glazing bead of appropriatea dimsion (area updoor up to 2.00 sqm mtr comprising of uPVC mutlichambred frame , sash and mulion (whereever required) . Extruded profiles duly reinforced with 1.6+- 0.2mm thick glavangaded mild steel section made from roll forming process of required lenght (shape and size according to uPVC profile), uPVC extruded glazing bits of the appropriate dimension , EPDM gasket , zinc alloy ( white powder coated 3D hinges and one handle of each side of pannels alongwith zink plated mild steel multi point blocking having transmission gear , cylinder with keeps and one side key 8mm x 100mm long GI fasteners for fixing frame to finished wall and stainless steel screwsetc profile of frame & sash shall bealso fusion welded including drilling of holes for fixing hardwere;s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of spproved quality complete all as specified and directed by Engineer - in - charge (Glass shall be paid separately) Note: For uPVC frame ,sash and mullion extruted profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be accpatble . Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 20mm thick uPVC pannles for fixing to Upvc door frame complete all as specified and directed by Engineer - in - charge.

Material and Labour for 5.5 mm thick plain glass fixing and glazing with aluminium beading and rubber gasket including haking out old broken glass in aluminium door and window frame complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and as directed by the Engir- in- Charge.

Supply and Fixing 3mm thick figured glass, pin had type and glazing with beads in squares n exe o.5 sqm each pane all as specified by Engr-in-charge.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and as directed by the Engir- in- Charge.

Dismantling boarding any description, fixed in any position with nails complete all as specified and as directed by the Engir- in- Charge.

Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for hard core of guage n.exc 63mm, deposited spread and levelled in layers n. Exc 15cm thick watered and rammed to a true surface complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for 40mm thick PCC(1:2:4) type B-1 using 20mm graded crushed stone aggregate) as in floors complete all as specified and as directed by the Engir- in- Charge.

Material and Labour 15mm thick screed bed or bedding layer of cement mortar 1:6 to laying floor finish complete all as specified and as directed by the Engir- in- Charge.

Material and Labour non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed complete all as specified and as directed by the Engir- in- Charge.

Material and Labour non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm(300mmx300mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed by the Engir- in- Charge.

Material and Labour glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed by the Engir- in- Charge.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for coloured chequered cement concrete tiles 22 to 25mm thick, set jointed and pointed in neat cement slurry in floors, with grey cement and pigment except tile complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Material and Labour Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by the Engir- in- Charge.

Material and Labour PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair, viterous china squatting pan of pattern long pan, size 580x440mm, white with intergral footrest including 'P' or 'S' trap front and back inlet any pattern including provision of lime concrete bedding complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excludingtaps, waste chain and plug and porecelain stopper but including bracket and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair CP grating doom 125 mm dia with cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified and as directed by the Engir- in- Charge.

S&F in repair 32 mm dia bore PVC flexible pipe for wash hand basiin and kitchen complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 15mm dia Angle cock chromium plated brass fancy type ,screwed down , high pressure, scrwed both ends for iron pipe in repair complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engir- in- Charge.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by the Engir- in- Charge.

M&L for Painting to steel surfaces with synthetic enamal paint over one coat of redoxide primer complete all as specified and as directed by the Engir- in- Charge.

M&L for cement concrete 1:3:6 Type C-2 as in foundations filling and mass concrete complete all as specified and as directed by the Engir- in- Charge.

M&L for 100mm thick PCC 1:4:8type B-1 (using 20mm graded aggregate), as in sub base complete all as specified and as directed by the Engir- in- Charge.

M&L for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15879;2004, Alkali and fungal resistance , dirt resistance exterior paint of requirede shade (Company Depot Tinted) with silicon additives @1.43lit/10sqm over and including priming coat of exterior primer [email protected]/10sqm over new surfaces complete all as specified and as directed by the Engir- in- Charge.

Taking down steel water tubing 15 mm with all fittings from walls, ceiling and floors, complete all as specified and as directed by the Engir- in- Charge.

Taking down steel water tubing 20 mm with all fittings from walls, ceiling and floors, complete all as specified and as directed by the Engir- in- Charge.

Material and Labour 15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and as directed by the Engir- in- Charge.

All as per Ser Item No 69 above but 20mm dia complete all as specified and as directed by the Engir- in- Charge.

Dismantling water tanks exc 500 ltr and n exc 1000 ltr and removing to store complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in repair complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by the Engir- in- Charge.

Dismantling cast iron work of any description complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 110mm PVC(SWR) Branch pieces, single T (equal or unequal) complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints of bore 110mm complete, all as specified, fix to wall complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 110mm PVC (SWR) bore Bend any radius complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tranches or in floor of bore 110mm complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor of bore 75mm complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of bore 75mm complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 75mm PVC(SWR) Branch pieces, single T (equal or unequal) complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing 75 mm PVC(SWR) bore Bend any radius complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing PVC(SWR) Vent cowls 110mm bore complete all as specified and as directed by the Engir- in- Charge.

Material and Labour for Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 (20 mm graded aggregate) finised even and smooth using extra cement complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing Drapery curtain rod of metalic 20 mm dia covered with pvc coating complete with MS bracket golden colour rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified .

Demolition of brick work built in CM including all quoins arches pillars etc complete all as specified and as directed by the Engir- in- Charge.

Dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks complete all as specified and as directed by the Engir- in- Charge.

All as per item No.89 above but except brick, complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engineer-in-Charge.

Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- (a) One light, fan, bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Ser Item No 93 but 5 Amp independent socket point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Ser Item No 93 but One 5 Amp socket point controlled by one switch on same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 93 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Switch flush type single pole one way 5 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Switch flush type single pole one way 15 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Socket outlet 5 pin, 5 Amps, 240volts flush type white finish , ISI marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Socket outlet 2 in 1, 3 pin, 5 &15 A, 240 volts, flush type white finish, ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Bell push, flush type 5 Amps white finish, ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Door bell multi music type 230V, single pole, ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Ceiling rose, surface backlite, 65 x 20 mm 3three terminal ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Lamp holder insulated body with back plate suitable for angle / batten fitting ISI Marked complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 250 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engineer-in-Charge. Make - Legrand/Scheinder/L&T

Supply and fixing in repalcement MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed by Engineer-in-Charge.

All as per item srl item No 107 but SPN 16-32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing for MCCB 100 Amps, 3 Pole, 415V, 16 KA with thermal magnetic protection adjustable type with short circuit and overload protection complete all as specified and directed by Engr-in-charge.

Material and Labour for Sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly complete all as directed by Engr-in-Charge.

Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge.

Supply and Fixing Decorative ultra slim linear LED lighting fixtures with extruded polycorbonate environmental friendly energy saver LED light fitting 1x20/22 watt (4'), 230 Volts, single tube mounting including LED Tube 20/22 Watt complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting complete all as specified and directed by Engineer-in-Charge.

All as per item ser item No 112 here-in-before but 1x10/12 Watt (2') LED light fitting mirror type with high output diffuser decorative type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 of 35 watt LED, 240 Volts incl bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts complete all as specified and directed by the Engr-in-charge.

Supply, fixing, installation and testing of ISI marked, energy efficient, water heater storage type made of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electrically operated, single phase, 50 Hz (BEE 5 star rating), complete of 25 Ltr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450 mm long, 15 mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner - 04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete in all respect all as specified and directed by Engr-in-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

Supply and fix heavy duty exhaust fan AC single phase 230/240 V of size 300 mm sweep 1400 RPM with louver & shutter including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan all as specified and directed by the Engr-in-charge. Note : Old unserviceable Exhaust fan is to be deposited to MES store yard.

Supply and Fixing LED Lamp 12 watt, 240 volts complete all as specified and directed by Engineer-in-Charge.

Earthing complete with copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt after mixing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer or as diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge.

Supply and Fixing Single phase electronic meters tamper proof LCD display with polycarbonate cover 230 V of rating 10 Amp to 60 Amp, accuracy class I 50 Hz, confirming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH including provision of suitable size of transparent PVC housing/enclosure with all necessary connection and grouting on wall complete and making good the wall surface after fixing the meter all as specified and as directed by Engr-in-charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

Supply and Fixing copper strip 20x3mm complete with saddles/insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints all as required at site or as directed by Engr-in-Charge.

Material and Labour for air termination signle pointed copper rod 12mm dia and 300mm long complete and all as specified and as directed by Engr-in-charge.

Material and Labour test point terminal block made of gun metal or phosphorus bronze of size 75x75x6mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal head screw complete and all as specified and as directed by Engr-in-charge.

Supply and Fixing GI tubing light grade 25mm dia, cut to size and bent to shape all as required at site including fixing arragemetn with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod complete and all as specified and as directed by Engr-in-charge.

Taking up or down steel water tubing of 25 mm bore and connection laid in trenches or floors or fixed to walls complete with all fittings & valves etc complete and all as specified and as directed by Engr-in-charge.

All as per description of srl item No.118 above but 40/50mm bore pipe complete and all as specified and as directed by Engr-in-charge.

Material and labour for tubes medium grade galvanized with all fittings laid in trenches of bore of pipe 50mm complete and all as specified and as directed by Engr-in-charge.

All as per serial item No 126 bore of pipe 25 mm complete and all as specified and as directed by Engr-in-charge.

Material and Labour for Stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete for size 50 mm dia pipe complete and all as specified and as directed by Engr-in-charge.

All per serial item No 129 above but bore of pipe 25mm complete and all as specified and as directed by Engr-in-charge.

Material and Labour Lagging to pipe all around with 40mm thick bonded mineral wool perfomed 'SNAP ON' pipe section of density 144kg/cum and provided with chicken mesh wire netting 25 gauge 20mm mesh on pipe of internal dia 25/20 mm including rendering cement plastering 15mm thick (1:3) on top layer of lagging all as per specifed & as directed by Engineer -in-charge.

Construction of valve pit brick masonry internal size 600x600x600mm (from top of PCC to bottom of cover ) including excavation in any type of soil returning, filling in around foundation and removal of surplus soil to a distance not exceeding 50 mtr, PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 6mm thick plaster in cement morter 1:4 to internal surface covered pit with MS sheet over 2 mm thick with locking arrangement, handle fixing arrangement and painting with aluminium paint two coats over a coat of red oxide primer all as per specified and as dircted by Engr-in-charge.

Supply, laying testing and connecting 35 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cables and getting out complete all as specified & as directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified & as directed by Engineer-in-charge.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & as directed by Engineer-in-charge.

Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable complete all as specified & as directed by Engineer-in-charge.

Brick protection with well burnt sub class ‘B’ brick a butting each other( width wise) across the cable laid in trenches complete all as specified & as directed by Engineer-in-charge.

Material and Labour for Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing in 16 Amp flame proof weather proof switch Socket and plug combined in LM 6 cable termination box, 250 V, 2P+earth complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing flame proof weather proof threaded type 3way/4way junction box 100mm dia inLM 6 aluminium alloy with all accessories complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing flame proof weather proof metallic hose conduit 3/4 " dia 300 mm long complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing flameproof double compression brass cable gland 3/4" dia complete with nipples complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing Flame proof weather proof switch with cable termination in LM 6 cable termination box aluminium alloy housing 16 Amp, single pole 250 volts complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing LED light fitting, 1x36 watt flameproof type FLP-WP IP-65 made of aluminium alloy LM6 with electronic ballast, bipen holders, connector block etc complete with all accessories prewired and includidnt connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & as directed by Engineer-in-charge.

Supply and Fixing energy efficient flame proof , heavy duty high speed exhaust fan 380 mm (15") sweep, matel body rust proof inbuilt safety grill, single phase 230 volts 50 Hz AC, totally enclosed heavy duty motor with die cast rotor mounted on two ball bearings complete with louvers & shutters, including making circular holes suitable for fixing of 380mm sweep exhaust fans by cutting the wall of any thickness/ required circumstances for exhaust of air and including grouting of rag/anchor bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete and connecting electrically using 3 core 0.75 sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site and directed by the Engineer-in-Charge.

Supply and Fixing in Flame proof weather proof distribution board 8 way with cable termination in LM 6 cable termination box aluminium alloy housing 250 volts complete all as specified & as directed by Engineer-in-charge.

Supply and fixing Flame proof weather proof LED flood light fixture new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 of 100 watt LED, 240 Volts incl bracket made out of GI pipe of suitable dia medium grade, suitable length as per site requirement bent to shape with welded MS flat 25 x 6 mm for mounting of fitting with FI clamps, nuts, bolts complete all as specified and directed by the Engr-in-charge.

Supply, laying testing and connecting 25 Sqmm 4 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge.

All as per item Srl No 148 here-in-before but of size 35 sqmm 3.5 core complete all as specified and directed by the Engr-in-charge.

All as per item Srl No 148 here-in-before but of size 70 sqmm 3.5 core complete all as specified and directed by the Engr-in-charge.

All as per item Srl No 148 here-in-before but of size 95 sqmm 3.5 core complete all as specified and directed by the Engr-in-charge.

All as per item Srl No 148 here-in-before but of size 120 sqmm 3.5 core complete all as specified and directed by the Engr-in-charge.

Supply and fix ON LOAD change over switch 415 V in sheet metal enclosures 4 pole of capacity 400 Amps complete all as specified and directed by the Engr-in-charge.

Fabrication, installation and testing of Feeder Pillar KIOSK type floor mounted dust/vermin proof indoor type of size 1.2 x 1.5 x 0.6 mtr or as per site requirement, CPRI approved factory fabricated made out of MS sheet of thickness 3.15 mm mounted on angle iron legs made out of angle iron of size 40x40x6 mm with front & rear opening with locking arrangement, containing bus bar chamber to accommodate 3 phase & 1 neutral copper busbar of size 40x10 mm fixed on epoxy based insulators in horizontal position in upper part of panel separate chambers for incoming and outgoing cables & MCCB, MCCB connected to busbar by copper strip of size 20x5 mm duly drilled hole for cable connection and powder coated with 7 tank process all as required at site or as directed by Engr-in-charge (including the PCC foundation of panel) complete including of following :- (a) MCCB 200 Amps 4P 25 KA (thermal, adjustable type, O/L & S/C Protection) - 01 No (I/C). (b) MCCB 160 Amps 3P 16 KA -02 Nos (O/G) (c) MCCB 125 Amps 3P 16 KA -04 Nos (O/G) (d) MCCB 100 Amps 3P 16 KA -04 Nos (O/G) (e) Digital Multi-function meter with CT's of required cap – 01 No. (f) LED type Indicator lamps (R, Y. B) – 01 Set. All accessories pre wired with suitable size copper conductor cable including making necessary arrangements for fixing all as required at site or directed. NOTE : 1) All connections to be done with proper size copper / Brass Thimbels. ( 2) Control circuit wiring to be done with S/C copper wire complete all as specified and directed. (3) All incoming and outgoing MCCB to be labelled as per the feeder area with necessary name plates.

Supply and fix MCCB 4P 160 A, 415 V, thermal and adjustable type with short circuit and overload protection of capacity 160 Amps complete, in sheet Steel enclosure factory fabricated OEM manufactured complete and all as specified and as directed by Engr-in-charge.

M/s Shakti Electric Works

Havish Construction