Renovation of dental lab and toilets in CHSS dispensary at Kharghar and providing and fixing CRCA sheet, external repairs and painting in CHSS dispensary at Vashi under Chembur Maintenance unit, Mumbai.

Amount

ABSTRACT SHEET

PART I : STRUCTURAL REPAIRS

PART II : CIVIL WORKS

PART III- TERRACE COVERING OF CHSS DISPENERY AT VASHI CRCA SHEET

PART IV - PUBLIC HEALTH WORKS

PART III : REBATE ITEMS

Description of Work / Item(s)

Amount

PART - I - STRUCTURAL REPAIRS

Providing & erecting Single/ double bamboo scaffolding using minimum 75 mm dia. best quality bamboo tied with coir rope & the horizontal & vertical members of the bamboos provided as required at spacing of not more than 900 mm apart both vertically & horizontally including providing cross supports as struts to tie the scaffolding properly to the building for maintenance/ repair works of external surfaces of buildings as & when required including providing necessary safety belts to workers, dismantling the scaffolding after repair work is completed including cost of transportation, labour, safety belts etc. complete all as directed by the Engineer- in- Charge.

a) Single/ double bamboo scaffolding.

Supplying and erecting M.S.tubular scaffolding using "H" frames of M/s.Arrow India ( or ) equivalent with horizontal and vertical rows @ suitable spacing as per I.S specification suitably overlapped at junctions and cross braced wherever required securely tied, supporting the scaffolding with building member as per permitted by the Engineer-in-Charge, including providing necessary safety belt and helmet to the workers and dismantling & taking back the scaffolding safety belt and helmet after the repaired works are complete all as directed by the Engineer- in- Charge. Note : 1.The mode of measurement shall be the over all (plain) external surface areas of building covered by the scaffolding measured flat and no deduction shall be made for any openings in the surface. The jambs, sill, soffits etc. of such openings shall not be measured for payment.

b) Double Steel Tubular scaffolding.

Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10

a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge. Note : Polymer used for this work in Kg shall be measured for payment.

Repairing with polymer bonded mortar up to 35 mm & 70 mm thick in layers of not exceeding 20mm (with out chicken mesh) in a day (proportion- cement 50 Kg : silica sand 125 Kg) with applying protection coat / bond coat to reinforcement, bond coat to old concrete and bond coat for every successive layers of 20mm thick in proportion polymer : Cement-1:1 by volume as per specification including covering the floor/windows with tarpaulin or equivalent covering material etc., and cleaning after repair etc., complete all as per specifications and as directed by the Engineer in charge. The rate is inclusive of protection coat /Bond coat of polymer.

Jacketing and strengthening of R.C.C column with free flow self compacting micro concrete made with Roff concrete Repair (Super flow micro concrete) manufactured by M/S. Roff construction chemical, (or) Renderoc RG manufactured by M/s. Fosroc chemicals (India) limited (or) ESSEN construction chemical or other approved equivalent make, which consist of dismantling loose concrete along with plaster, cleaning the reinforcement thoroughly with wire brush and finally with acetone, making micro concrete by mixing prepacked dry micro concrete and water in proportion as prescribed by the manufacture, mixing them thoroughly for 5 minutes for achieving free flow state of micro concrete, pouring the micro concrete in layers, compacting the concrete by blowing strokes with 16mm steel rod curing for 10 days (curing shall be commenced immediately after 4 hours of pouring concrete) etc. including providing shuttering etc. complete all as per specifications and as directed by the Engineer-In Chrage . NOTE: Measurement shall be taken as per actual consumption of pre-packed dry micro concrete in Kg. used for structural repairing work.

Sand face 20 mm thick Cement plastering in two coats over exterior masonry and concrete using factory manufactured pre mix/ ready mix 12 mm mortar base coat & 8 mm thick final rendering at all floors CM 1:4, of 'Roofit Mix' of M/s. Premier Floor to Roof Materials pvt. ltd/ 'Easy plast' of M/s. Walplast Products pvt. ltd/ 'Readiplast' of M/s. Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels including adding water proofing compound at 2% by weight of cement for base coat, membrane curing by applying one coat of factory made curing compound Resikure of M/s. Anuvi Chemicals, Concure of M/s. Fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by Engineer- in- Charge.

Cement plastering using factory manufactured pre mix/ ready mix mortar in CM 1:4 of 'Roofit Mix' of M/s. Premier Floor to Roof Materials pvt. ltd/ 'Easy plast' of M/s. Walplast Products pvt. ltd/ 'Readiplast' of M/s. Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels including membrane curing by applying one coat of factory made curing compound Resikure of M/s. Anuvi Chemicals, Concure of M/s. Fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by Engineer- in- Charge.

a) 12 mm thick.

b) 15 mm thick.

Providing and applying Over sand faced plastered / Form finished surfaces one coat of base primer (Apex Ultima protect basecoat of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Apex Ultima Protek of M/s. Asian Paints / Weathershield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the Engineer-In Chrage.

Providing and fixing in position G.I. chain link fencing of 8 gauge and mesh size of 50mm x 50mm to M.S. post including painting with two coats of synthetic enamel paint over a coat of steel primer scaffolding fixing the same with necessary ‘J’ hooks, bolts , nuts, washers, staples, 6mm M.S.Fixing rods including necessary scafolding etc. complete all as per direction of Engineer-In-Charge.

Supplying 600mm dia concertina to side / top of ‘Y’ shaped barbed wire fencing, erecting & fixing in position 8 guage G.I. concertina wire fencing to existing wall work which consist of procuring G.I. concertina of approved quality, brand and of diameter as indicated below, erecting and fixing the same to top /side of ‘Y’ shaped angle provided over coping of compound wall, fixing concertina over ground along inside of compound wall including painting with hot dip method in two coats of synthetic enamel paint over a coat of steel primer, welding / screwing concertina to M.S. ‘Y’ angle to compound wall including cost of materials, labour, scaffolding etc. complete all as directed by the Engineer-In-Charge.

Supplying and fixing in position, 2 ply, 12 gauge, 4 spikes at 100 mm c/c G.I. barbed wire to M.S. angles / RCC wooden posts including supplying and fixing necessary ‘J’ hooks, bolts, nuts, washers, staples as required etc. including scafolding etc. complete all as per Engineer-In-charge direction.

Structural steel work in frames, truss, purlin etc using MS angels, flats, RHS, SHS, plates sections of required sizes including supplying, cutting, fabricating, welding, tools & plants, transportation, lifting placing at athe roof level and fixing on the parapet wall with anchor/anchor bolts of Hilti make with adhesive of Hilti or equilvqlent including. including painting all structural work with two coats of synthetic enamel paint of approved shade & make over a coat of approved steel steel primer, making good the damaged surface to its original good condition. Cleaning, scaffolding, all complete as per aprroved Drawing and as directed by EIC.

Filling the crack over roof terraces with following operation consisting of, 1. Open the crack with V grove 25 mm deep. 2. Cleaning thoroughly with wire brush and subsequently with water. 3. Mixing of Zycoprime and water in the ratio of 1:2:20 and poring in V grove till the grove is fully filled/ saturated, allow to set for set for 24 hrs. 4. Crack filling with the a mixture of Elastobar of M/s. Zycocil or equivalent and cement and silica sand in the ratio of 1:1:2 by weight, allow to set for 6 hrs. 5. Applying elastobar of M/s. Zycocil or equivalent, coating with elastobar and cement with ratio 1:1 both ways by brushing,allow to dry for 3 hrs. 6. Apply a coat of mixture of Zycoprime and cement in the ratio of 1:1 covring the grove for about 100 mm each side.

Structural steel work in frames, truss, purlin etc using MS angels, flats, RHS, SHS, plates sections of required sizes including supplying, cutting, fabricating, welding, tools & plants, transportation, lifting placing at athe roof level and fixing on the parapet wall with anchor/anchor bolts of Hilti make with adhesive of Hilti or equilvqlent including. including painting all structural work with two coats of synthetic enamel paint of approved shade & make over a coat of approved steel steel primer, making good the damaged surface to its original good condition. Cleaning, scaffolding, all complete as per aprroved Drawing and as directed by EIC.

Raised and cut cement pointing to stone work with cement mortar 1:3 including raking out joints, pointing neatly and finishing the joints as specified below including curing, scaffolding etc. complete all as directed by the Engineer- in- Charge.

Pressure grouting through RCC slab/ brick masonry by drilling hole in RCC slab to required depth without causing any damaged to reinforcement, inserting ½” dia. PVC pipe in hole securing the hole sides with mortar 1:2, pressure grouting with cement slurry mixed with approved water proofing compound @ 2% by weight of cement to required pressure, continuing the pressure grouting till the flow of cement slurry stops, removing the PVC pipe, sealing the hole with cement mortar 1:1, scaffolding etc. complete all as directed by the Engineer- in- Charge.

Description of Work / Item(s)

Amount

PART II - CIVIL WORKS

Demolishing brick/ stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing off unserviceable materials out side colony etc. complete all as per specification & as directed by the Engineer- in- Charge.

a) Brick work.

b) Stone work.

Cutting soling/ water bound macadam road portion etc. and stacking the serviceable material and disposing off unserviceable material out side colony etc. complete all as per specification & as directed by the Engineer- in- Charge.

Demolishing plain cement concrete or bituminous road by chiselling at all levels including scaffolding, disposal of materials out side colony etc. complete all as per specification & as directed by the Engineer- in- Charge.

Demolishing RCC works by chiselling at all levels including scaffolding, cutting of reinforcement bars by gas cutting, straightening and stacking of steel bars and disposal of unserviceable materials out side colony etc. complete all per specification & as directed by the Engineer- in- Charge.

Earth work excavation over areas in all soils except soft and hard rocks and disposing off the surplus soil out side colony etc. complete all as per specification & as directed by the Engineer-in- Charge.

Dismantling carefully the existing RCC kitchen platform along with finishing by chiselling without damaging existing structure including cutting the reinforcement etc. depositing the serviceable material at departmental store and disposing off debris outside colony etc complete all as directed by the EIC.

Half brick masonry using well burnt locally available bricks of approved quality in cement mortar 1:4 at all floors and levels including RCC 1:2:4, 115 mm wide & 80 mm thick stiffeners at every one metre height with 2 nos. of 6 mm dia. M.S. rods including form work, scaffolding, raking out joints, curing, etc. complete all as per specifications & as directed by the Engineer- in -Charge.

a) In partition walls without stiffeners.

Brick work in cement mortar 1:6 using well burnt locally available bricks of approved quality including raking out joints above ground level simultaneous pointing below ground level, curing, scaffolding,etc. complete all as per specifications & as directed by the Engineer-in-Charge.

a) In foundation & plinth, drain walls, chambers etc.

b) In super structure at all floors and levels.

Providing and laying 150 mm consolidated thickness dry rubble stone hard core soling of following consolidated thickness in sub base to floor and in plinth protection to required levels and lines with first quality rubble, hand set, well packed including filling the interstices with smaller stone chips, supplying & finishing/ blinding the surfaces with approved blinding quality murrum including watering, consolidation etc. complete as per Specification drawings & as directed by Engineer-in-charge.

Reinforcement for reinforced cement concrete at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour etc.complete all as per specifications and as directed by the Engineer-in-Charge. Note:- Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment.

a) With high yield strength deformed bars of grade Fe-500 D conforming to IS 1786.

Providing water proof brick bat coba filling in the depression of toilets, bath etc. and finishing the surfaces even, so as to be suitable to receive the tiles and including removing the old damaged brick bat coba and disposing off debris outside colony etc. complete as directed by the Engineer- in- Charge.

Plain cement concrete using graded stone aggregate of 20 mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centring etc. at all levels and locations. Complete all as per specification & as directed by the Engineer- in- Charge.

Random rubble masonry using spotless black trap or approved locally available stone in cement mortar 1:6 including raking out joints, scaffolding simultaneous flush pointing using through bond stones at every 900 mm in horizontal & vertical courses of each layer including AC pipe 50 mm dia weep hole at 1.5 m c/c in horizontal & in vertical, curing, scaffolding etc. complete all as directed by the Engineer- in- Charge.

a) In foundation & ground level up to plinth.

b) In super structure.

Providing & laying at all floors & levels first quality vitrified tiles of minimum 12 mm thick specified by the manufacturer of M/s. H & R JOHNSON (INDIA) Ltd. or equivalent approved make of approved colors, shade and texture in flooring/ dado/ skirting as per approved pattern incluidng cost of all materials including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed wirh matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing, making necessary opening cutouts etc. and including removing existing flooring/ dado and disposing off debris outside colony complete all as per specifications, relevant IS code & as directed by the Engineer- in- Charge.

a) In flooring with tiles of approx. size 600 mm x 600 mm similar to Salt & Pepper (White/Athelon) of M/s H&R JOHNSON(I) LTD. Laid directly over existing tile using tile on tile polymer cum cement based adhesive.

b) In dado/ skirting with tiles of size 600 mm X 100 mm or 600 mm x 600 mm similar to Salt & Pepper (White) of M/s H&R Johnson (I) Ltd laid over 12 mm thick CM 1:3 backing, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting etc. complete, including dismanting the existing dado/skirting tiles and backing cement mortar disposal of debris out side colony etc. complete.

Providing and laying at all floors and levels Vitrified tiles of size 600 mm x 600 mm (approx.) similar to salt & pepper satin finish (grey) of M/s. H & R JOHNSON (INDIA)Ltd or equivalent/ colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cut out where necessary, including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per drawings and manufacture's specification, relevant IS code and directed by the Engineer-in- Charge approved make of approved pattern, colour & make & min. thickness of 8.5 mm or as per manufacture's specifications laid directly over existing tile with polymer cum cement based adhesive (water proof quality) manufactured by Roffe Construction or M/s. Bal Endura Chemicals or other approved equivalent in respect of flooring and fixed over 12 mm thick backing cement mortar 1:3 in respect of skirting, close jointed and grouted white/ colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/ cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per specification, relevant IS code & as directed by the Engineer- in- Charge. Note: In case of non-availability as per item, other makes which can be considered are 'Asian', 'Oracle Granito Ltd.', 'Orient' Regency. No claim for payment of over thickness of adhesive for tile over tile work considered by the Department.

a) In flooring with tiles of approx. size 600 mm x 600 mm laid directly over existing tile using tile on tile polymer cum cement based adhesive.

b) In Dado/ skirting with tiles of size 600 x 100 mm similar to Salt & Pepper (White) of M/s. H & R Johnson (I) ltd laid over 12 mm thick CM 1:3 backing, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting etc. complete including dismantling the existing dado/ skirting tile and backing cement mortar disposal of debris out side colony etc. complete.

Removing loose / shaky vitrified floor tiles and refixing the same using polymer modified cement based tile adhesive manufactured by Roffe Construction – NSA (Non Skid Adhesive) or M/s Bal Endura Chemicals– Gold star, including removal of loose/shaky tiles cleaning back side of tile and removal of tile adhesive from existing floor area, cleaning etc. complete all as per specifications and as directed by the Engineer-In-Charge.

Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or euqivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed wirh matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and disposing of debris outside colony (Disposal of debrise will be paid under seperate item) complete all as per specifications, relevent IS code & as directed by the Engineer- in- Charge.

a) In flooring with anti skid tiles of size 300 x 300 mm x 10 mm th ( approx size) Goodgrip or Supergrip Series of Endura tiles of M/s H& R Johnson or approved equivalent with 20 mm thick 1:4 Cement mortar bedding

b) In dado / Skirting with tiles of 300X450mm (Approx size) of Digital HD Series of M/s H&R johnson (India) Limited or approved equivalent fixed over 12 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) backing / fixed directly over existing tile with polymer cum cement based tile adhesive manufactured by M/s. Roffe construction (Non-Skid Ahhesive, NSA) or M/s Ardex Endura (Gold Star) or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.

Kotah stone flooring/ dado/ skirting at all floors & levels using 25 mm to 30 mm thick hand cut machine polished kotah stone slabs laid over cement mortar bedding as specified below, close jointed & pointed with matching slurry of cement finished to levels, slope or plumb, curing including removing carefully existing damaged/ worm out flooring and dado & disposing off debris out side colony etc. complete all as per specifications & as directed by the Engineer- in- Charge.

a) In flooring with cement mortar 1:4, 20 mm thick bedding and machine polishing after laying.

b) In dado/ skirting with 20 to 25 mm thick Kotah stone slabs laid over cement mortar 1:3 backing 12 mm thick with exposed edge machine cut and surfaces hand polished after laying.

Providing and laying of Kotah stone for stair treads with 3 line grooves and nosing at all floors & levels using 25 mm to 30 mm thick hand cut machine polished Kotah stone slabs laid over 1:4 cement mortar bedding including curing hand polishing removing old damaged/ worn out tread and disposing off debris out side colony etc. All complete as per specification and as directed by the Engineer- in- Charge.

Providing and laying of Kotah stone 25 mm thick risers of approved size and laid over 1:3 Cement moratr backing of 12 mm thick at all level and floors including cutting to required size, curing, removing of old damaged/ worn out risers and disposing off out side colony all as directed by the Engineer- in- Charge.

Providing & laying machine cut machine polished natural stones as mentioned for the followings for kitchen platform topping and facia over and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required etc all as per specifications and as directed by Engineer in charge. Note : Top exposed surface on plan & exposed vertical finished face shall be measured for payment in sqm.

a) For kitchen platform top, upto 750mm wide and upto 1800 mm length in single piece consisting machine cut machine polished on one side 35mm thick cuddappa stone at bottom and mirror polished machine cut 18mm thick Jet black Granite stone at top fixed with 20 mm thick 1:4 cement mortar, between two stone slabs (Double stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges etc complete .

b)For kitchen platform horizontal facia upto 100 mm wide machine cut machine polished on one side 18mm thick Jet black Granite stone fixed with epoxy resin base (Arladite adhesive or equivalent) including round moulding and polishing the edges etc complete.

c) For horizontal bedding of size 30mm X 16mm mchine cut polished jet black granite stone fixed with epoxy resin base ( Araldite adhesive or equivalent) including round moulding and polishing the edges etc. complete

Providing & laying machine cut machine polished Cuddapah stones/granite stone/marble stone as mentioned followings for kitchen platform vertical support /shelves /window cill etc and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required etc all as per drg, specifications and as directed by EIC.

a) For vertical support of Counter/ platform, consisting of 2 nos 35 mm thick machine cut machine polished on one side cuddapah stone slabs sandwiched between the stones with 20 mm thick CM 1:3 including providing exposed front face upto 100 mm wide vertical facia of mirror polished 18mm thick jet black granite stone on exposed sides with epoxy resin base (Aradite or equivalent) including rubbing and polishing of cut edges etc complete all in line, level, plumb etc.

b) 30 mm thick machine cut and both side machine polished Cuddaph stone for shelves including rubbing and polishing the exposed edges.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:3, 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc.and depositing the same at dept store etc. complete all as per specifications, drawings & as directed by the EIC. Note: Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured.

a) Jet Black Granite Stone.

b) Baroda Green marble Stone

Providing and laying of brown Granite stone for stair treads with 3 line anti skid grooves and nosing at all floors & levels using 18 mm to 20 mm thick hand cut machine polished/ edge rounding of brown Granite stone slabs laid over 1:4 cement mortar bedding including curing hand polishing removing old damaged/ worn out tread and disposing off debris out side colony etc . All complete as per specification and as directed by Engineer-in-Charge.

Providing and fixing of machine cut and both side polished minimum 35 mm thick Cuddapah stone for shelves of cup board including removing of old damaged wooden shelves and making Nitches all the three sides of cup board very carefully and fixing Cuddapah with cement mortar and reinstating the surrounding as per existing including removing of old damaged shelves outside colony all as directed by Engineer- in- Charge.

Mirror polishing on marble work/ Granite work/ stone work where ever required to give high gloss finish etc. all complete as per specification and as directed by the Engineer- in- Charge.

Providing & fixing asbestos cement corrugated/ semi-corrugated/ plain/ curved sheets, 6 mm thick in roofing including all over-laps mitring, supplying and fixing necessary 'J' or 'L' hooks, bolts, nuts and bituminous and G.I. Washers as per manufacturers code of practice and cutting the asbestos sheets as required, scaffolding, etc. including removing existing damaged asbestos cement sheet and disposing off debris out side colony etc. complete all as per specifications & as directed by the Engineer- in- Charge.

Repairs to the existing door & window frame, shutter of bath, W.C, bedroom, etc. by replacing part of the frame with 2nd class teak wood at site of work by: i) Cutting of damaged /decayed portion of the door frame without disturbing/removing of the existing frame. ii) Providing wood with 2nd class teak wood as per the existing frame for repairing of the damaged/ decayed portion of the frame including making lap joints for jointing the new wood with old wood work by fixing necessary screws and synthetic adhesive etc. complete. iii) Fixing the repaired door frame in position with embedding the frame up to 50 mm depth in the floor and fixing coach screws to the wall including breaking of the floor for making pocket, applying two coats of bituminous paint to the surfaces of frames in contact with masonry/ concrete, repairing floor with P.C.C. 1:2:4 finishing including one coats of synthetic enamel paint over one coat of primer on new work and one coat of synthetic enamel paint over entire surfaces of frame etc. & disposing off debris outside Dispensaries and colony etc. complete all as directed by the Engineer- in- Charge.

Providing & fixing approved quality block board & teak veneer of Anchor / Mysore/ Kit ply or equivalent approved make in following thickness including cutting to required sizes and fixing the same with necessary nails/ screws/ adhesives in partitions, cupboard & door shutter/shelves, kitchen cabinets, partition etc. at all floors & locations including, providing and fixing 6 mm thick teak wood beading to all exposed edges of block board including cost of nails, screws, adhesive, wastage in cutting, transportation etc. including cost of fixing the fittings, painting the surfaces with one coat of putty and two coats of synthetic enamel paint over a coat of primer etc. including removing shutter/shelves and disposing off the un-serviceable material out side colony including wastage in cutting, transportation etc., complete all as directed by the the Engineer-in-Charge.

a) 19 mm thick block board shutter including providing & fixing S S Piano hinges 35mm wide.

b) 25 mm thick block board shelves.

c) 4 mm thick teak veneer for door and cupboard shutter with hand wood polish.

Providing and fixing C.P. teak wood moulded beading (architrave) of sizes 40 mm x 20 mm. around door & window frames at all floors & locations with necessary screws including two coats of painting with one coat of approved primer including cost of screws, wastages in cutting, transportation etc. including removing the old damaged beading and disposing the same complete all as directed by the Engineer- in- Charge.

Providing & fixing approved make marine plywood of 6 mm, 12 mm & 19 mm thick conforming to latest IS -710, for making / repairing of wooden cupboards/cabinet/partition etc. at all floors and levels, including cutting to required sizes and jointing and fixing the same with necessary screws, adhesives, all around 6-10mm thick bidding Patti etc. painting the surfaces with one coat of putty and two coats of synthetic enamel paint over a coat of primer etc., disposing off the un-serviceable material out side colony including wastage in cutting, transportation etc.. complete all as directed by the the Engineer-in-Charge.

6 mm thick

12mm thick

19mm thick

Providing & fixing ordinary plain/ frosted/ Bajara sheet glass of approved make of following thickness in various sizes as required at site, fixing to windows/ louvers, partitions, vision panels, doors etc. using first class oil putty of approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading with necessary screws, nails etc. at all floors & locations including cutting the glass to required size, removing the existing broken/ damaged glass panes from windows / doors/ partitions etc. along with its old oil putty, beading etc. and disposing off the un-serviceable material out side colony including wastage in cutting, transportation etc. complete all as directed by the Engineer- in- Charge.

a) 4 mm thick plain sheet glass.

b) 4 mm thick Bajra sheet glass.

c) 5 mm thick plain/ frosted/ Bajara sheet glass with neoprene gasket etc. for aluminium windows.

d) Providing and fixing 8mm thick toughen clear glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way PVC gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge.

Supplying & fixing in position the 35 mm thick solid core block board flush door shutters with commercial ply on both side conforming to IS with external type teak wood lipping of section 20 mm thick all-round, with/without 4 mm thick teak wood fixing shutters in position to pressed steel door frames/ wooden frames at all floors by cutting/ planning if necessary including supplying & fixing heavy duty 4''x1 1/2'' SS hinges including cost of fixing the fittings, painting the shutters all over with one coat of putty and two coats of synthetic enamel paint of approved make & colour over one coat of approved primer / one side enamel paint and one side wood polish etc. including removing the old damaged shutter and transporting to Deptt. stores all as per specifications & as directed by Engineer- in- Charge. Note : 4 mm thick veneer sheet payment shall be paid in separate item.

a) For Door 35 mm thick.

Providing and fixing in position 2nd class C.P. teak wood panelled door shutters of 35 mm thickness, styles, top & other rails 100 mm wide, lock and bottom rails 175 mm to 200 mm wide, with treated under vaccum pressure and kiln seasoned secondary species timber with insert panels of 12 mm thick marine plywood including supplying & fixing heavy duty SS hinges including painting the shutters all over with once coat of putty and two coats of synthetic enamel paint of approved make & colour over one coat of approved primer etc. including cost of fixing the fittings, removing the old damaged shutter and transporting to Deptt. stores all as per specifications, & as directed by Engineer- in- Charge.

Supplying & fixing night latches of Godrej make,7 lever with triplicate keys to the existing main door at various floors and locations including removing the old night latch from its position, shifting the position of the night latch if necessary and pligging the portion if necessary for accommodating the new night latch, fixing unwanted holes and repairing of door shutter at night latch the new night latch at proper level, alignment and location with necessary screws, ensure proper functining,retruning the old fittings to the Deptt. Stores etc. complete all as per specification and as directed by the Engineer- in- Charge.

Supplying following type of miscellance fitting fixture and fastening of approved quality along with necessary CP Brass screws, bolts, nuts, washers and other standard accessories etc. Complete all as directed by the Engineer in Change. Note : A sample of each material listed above should be got approved by Engineer In charge before supply.

Heavy duty Stainless steel butt hinges of Size 4'' x1 1/2'' inches for door shutter.

Aluminium Tower bolt 200 mm long with 10 mm dia barrel.

Aluminium Tower bolt 150 mm long with 10 mm dia barrel.

Aluminium Tower bolt 100 mm long with 10 mm dia barrel.

Aluminium Door Handles Matt D Type Size 150 mm.

Aluminium Door stoppers with double rubber bushing.

Aluminium Maruti lock 100mm for Sliding window.

Star Lock 100 mm, Eagle Star Make, for sliding window latch.

Aluminium heavy duty window shutter PVC bearing.

Godrej cam lock for latter box.

Door catcher magnet.

Concealed Locks for Sliding Windows (Aluminium full Body).

Glass shelf 450mm x 100mm x 6mm thick with SS bracket.

Nylon rope 6mm dia.

Nylon rope 4mm dia.

Providing & fixing Hydraulic Door Closer conforming to IS:3564 of heavy duty Make Godrej ( 80 kg Capacity ) with fitting and fixtures necessary screws/bolts and other accessories as per approved sample including removing the existing old & damaged Door closer with out any damage to the property and submitting the same to the Dept. store complete all as per specifications & as directed by the Engineer-in-Charge.

Hydraulic Door Closer of Make Godrej, Dorma or approved equivalent ( Right/Left Type )

Supply of MS screw full/half thread of approved quality. JSW and equivalent make.

MS Screw 45/8

MS Screw 35/8

MS Screw 25/8

MS Screw 20/6

MS Screw 12/6

Providing and applying silicon sealent of Dr. Fixit make or equivalent approved at all levels in aluminium windows, facades etc. all complete including scaffolding etc as per specifications and as approved by Engineer-in-Charge. Note: Measurement shall be taken as per kg. consumption of Elastobar only for above mentioned opreation.

Providing and fixing window curtain with S.S. Rods are made of 304 stainless steel with a perfect glossy mirror finish with brackets, elbows, J hooks and all necessary finttings etc. all as per specifications and directed by the EIC. Note: Colour/Shade will be decided by MOIC of Respective CHSS Dispensaries.

S.S. Rods are made of 304 stainless steel with a perfect glossy mirror finish

ICU Partition Stripes Net Hospital Curtain with silver finish rings.

Window curtain with silver finish rings..

Providing and fixing superior quality vertical blinds of M/s. VISTA or approved equivalent manufacturer with approved best quality fabric of required shade and colour, all accessories required for fixing in position all as per approved sample, design, pattern complete all as directed by the Engineer-In-Charge. Note: Mode of measurement shall be length of aluminium top runner x height from top of channel and up to bottom of blind. The work shall be carried out in Kharghar, Vashi Ghatkoper,Andheri & Dombivali Dispensaries and Chembur Maintenace Office.

Loosening and providing temporary supports of existing electrical fittings/ fixtures/ board for carrying out tiling work etc. and refixing it after completion of renovation including supplying & fixing casing capping & electrical wire wherever required as per deptt. specification etc complete all as directed by the EIC

Providing and fixing CI Frame and cover as per latest IS for chamber of various sizes including cost of necessary 1:2:4 cement mortar for fixing, painting the frame and cover with two coat of approved make and shade over a coat of steel primer etc. complete as directed by the Engineer-In-charge

White washing for ceiling & walls of rooms and staircases in two coats on old works with lime of approved quality by adding blue and glue in required quantity including scaffolding, scrapping, wherever required, cleaning the surface with sand paper and fibre broom and filling the cracks, holes, with approved putty and making even surfaces etc. complete as per specifications including cleaning of floors, doors, windows etc. as directed by the Engineer- in- Charge.

Providing and applying one coat of cement based grey putty of M/s Roofit mix or other approved equivalent make over entire surface including prepraring old painted surfaces by thoroughly scrapping oil bound distemper / acralic emulasion / white wash eyc. filling up the cracks, crevices, depression, holes, spray curing for three days etc. including sand papering and making surfaces even and smooth dusting / cleaning, scaffolding, covering the furniture etc. with tarpoulines or equivalent covering materials, cleaning of all surfaces etc. & disposing of debris outside colony etc. complete as per specification and as directed by the Engineer in charge.

Distempering on old painted surface with two coats of synthetic oil bound distemper of approved shade and make over one coat of approved cement primer including preparing the surfaces removal of old paint if any, sand papering filling with approved make putty wherever required scaffolding including cleaning of floors, doors & windows etc. all as per specifications and as directed by the Engineer- in- Charge.

Repainting of old painted surfaces with two coats of acrylic emulsion paint of approved make & shade over two coats of approved primer (alkali resistant) consist of thoroughly scrapping oil bound distemper/ acrylic emulsion/ white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco putty work, applying two coats of acrylic emulsion paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing off debris outside colony etc. complete all as directed by the the Engineer- in- Charge.

Repainting of old painted surfaces with two coats FLAT oil paint of approved shade and make over one coat of approved cement primer including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc. & disposing off debris outside colony etc. all as per specifications and as directed by the Engineer- in- Charge.

Repainting of old painted surfaces with two coats of Royal luxury emulsion paint of approved shade and make over two coats of approved cement primer which consist of thoroughly scrapping old painted surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2 coat of approved cement primer, carrying out putty work wherever required including necessary covering material and removal of splashing's & droppings from floors, walls including scaffolding, ladder as required etc. complete all as directed by the Engineer- in- Charge.

Painting old wood/ steel work with two coats of synthetic enamel paint of approved shade & make over one coat of steel primer including preparing surfaces, filling with putty wherever required, scaffolding & cleaning etc. complete all as per specifications & as directed by the Engineer- in- Charge.

a) On wooden surfaces with two finishing coat.

b) On steel surfaces with two finishing coats over a coat of steel primer.

Applying three coats of Touch wood of approved make & tint to obtain finish as required over a coat of wood filler including sand papering, cleaning, filling up holes, cracks & crevices with putty etc. complete to give an uniform shade etc. complete all as per specifications & as directed by the Engineer- in- Charge.

Providing chemical based water proofing of NEWCOAT of M/s Pidililte, Indofil chemicals UV resistant of approved colour over terrace and parapet as per the following procedure: Chemical properties: PH Value : 9 ( min.) Sp. Gravity : 1.035 Active solid content : 47%/mass (min) Viscosity : 17 sec (by Ford cup B-4 method) UV Resistant : Contineous 200 hr (min) a) Cleaning the terrace completely with high presure water jet pump (100 Kg./sq.cm.) cleaning to remove all dirt with wire metal brush. b) Applying a coat of Indofil MC-76 mixed with clean water in 1:4 ratio i.e., one part of MC-76 and four parts of clean water over the entire area to be treated including filling of cracks, if any with CM-1:3 with waterproofing compound. c) Applying a coat of cement bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement. d) Providing and spreading of polycon based fibrous waterproofing net for entire area of terrace including lapping as per manufacturer's specifications immediately after applying bond coat and curing. e) Applying one more bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement over the polycon based net. f) Applying two coats of flex top coats with indofil flexcoat mixed with 85 parts indofil flex coat and 15 parts clen water or applying two coats of Dr.fixit New coat without dilution. (i) Over terrace slab, top of water tank and parapet including removing the existing damaged thermolay membrane and cleaning with kerosine/ thinner/ scubbing with machine etc., disposing off debris out side colony and cleaning complete. Notes: (i) The entire work shall be carried out a per manufacturer's specification and as directed by the EIC. ii) The contractor shall furnish guarantee bond on appropriate stamp paper in the proforma as per Appendix 'D' for the entire waterproofing treatment for maintaining the surroundings and under side surfaces of the waterproofing treatment in bone dry condition for 5 years. During the guarantee period the contractor shall attend all leakages, defects etc. if noticed, free of cost, starting the work of checking up and rectification within a week's time from the date of intimation about such leakages / defects. iii) The contractor must take full precautions that original brick work is not damaged while dismantling of plaster. Incase of any damage the same shall be made good with 22g chickenwire mesh at his own cost . No separate payment for any additional thickness of plaster if any will be made. Contractor must visit site and acquint himself with the condition of building.

Providing assistance to the departmental technician for attending the complaints of various nature viz electrical, plumbing etc. in various flats and buildings including tools and manpower, loading, unloading etc. complete all as directed by the Engineer- in- Charge.

Unskilled

Skilled

Supplying and fixing 25mm thick PVC integral foam sheet in form of flush finish door shutter, manufactured by M/s Jain Irrigation System Ltd. ( Excel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 no's 100mm heavy duty S. S. hinges, 2 no's 100mm heavy duty aluminium baby latches, and 2 nos. 100mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200mm including providing and fixing PVC moulded louvers on both faces in in the opening of vision panel with S. S. screws, all edges to be smooth finish with mixture of PVC powder and solvent including removing existing door shutter & fittings etc. complete all as per specification & directed by the Engineer in Charge.

Providing and fixing approved heavy quality nylon pigeon net of 40 mm mesh size, diagonally measured at all levels and locations, edge protected with nylon thread of approved diameter & colour including scaffolding, removing and disposing off old net at directed place etc. complete all as directed by the Engineer- in- Charge.

Providing and fixing C.P. wood battens of size 40 X 12 mm all around net all floors & location with 35/8 screws & brass nails including cost of screws, wastage in cutting, transportation etc. & including painted with two coat of synthetic enamel paint, removing the old damaged beading and disposing off to Departmental stores etc. complete all as directed by the Engineer- in- Charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/ top hung/ fixed/ adjustable louvered windows ,ventilators and walls span partitions with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufacutres for following types with extruded sections of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and wights as directed for frames and shutters(including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by Engineer- in- Charge..

Disposing off the unwanted wooden pieces, tree branches, twigs, dried leaves, broken glasses material from CHSS Dispensary premises located at Andheri, Vashi, Kharghar and Dombivali under Chembur Maintenance unit to BMC Dumping Ground, disposing the debris by mechanical/ truck including loading unloading the derbies from premises inclusive cost of labour, tools and plants, mechanical meance etc. complete all as directed by the Engineer- in- Charge.

Labor charges only for Removing and fixing in position at all floors, levels/ heights existing wooden/PVC doors along with the existing fittings complete all as per specifications, drawings and as directed by the Engineer- in- Charge. Wiring / rewiring of electrical wiring

Wiring / rewing of electrical eiring concealed/ cassing capping /conduct including labous, wire FRLS ISI approved red, black & green colour code, material like screws, wall plug, ISI approved make (Precision) casing capping / condict pipe of appropritate size, insulation tape, lugs etc. properly terminating with crimping lugs etc. complete as directed by the Engineer in Charge Note: 1. Agency has to make arrangement to reach at the site by own cost. 2. All kind of tools & takles , materials should be arranged by contractor.

Description of Work / Item(s)

Amount

PART III - TERRACE COVERING OF CHSS DISPENERY AT VASHI CRCA SHEET

Providing and fixing precoated with high durable polyester paint G.I CRCA 0.5 mm (min) thick steel sheets manufactured by M/s. Essar/ Jindal steel sheets make in SR-25 module of Stucco fixing over RCC roof on M S frame at all floor and locations,including bending at required angle, including necessary ridges and gable ends, valley and over lapping shall be 200 mm, fixing the sheet with self tapping SS Screws fixed with machine with bituminous washers/ GI bolt of 8 mm dia. The base metal shall be CRCA Steel having minimum yield strength of 240 MPa and minimum UTS of 280 MPa, Galvanized to 120 gsm zinc coating mass (total both sides) as per I S: 277 or conforming to AS: 3566 Class 3 of rust shield/ corroshield make including grouting over RCC slab/ columns/ Cast- in- situ PCC blocks in line level and level, at all levels including necessary scaffolding etc. complete all as per approved drawing and as directed by Engineer- in- Charge.

Removing & refixing of existing CRCA sheets at all floor and locations, including bending at required angle, including necessary ridges and gable ends, valley, fixing the sheet with self tapping SS Screws fixed with machine with bituminous washers/ GI bolt of 8 mm dia., at all levels including necessary scaffolding etc. complete all directed by Engineer- in- Charge.

Providing, laying at all location plain cement concrete of mix 1 : 1.5 : 3 using graded stone aggregate of 20 mm max size for making of blocks for suppoering structure including mixing, compaction, finishing, curing, form work etc. at all levels including necessary scaffolding complete all as per specifications and as directed by the EIC.

Dismantling carefully the existing Brickwork, PCC, waterproofing etc by chiseling without damaging existing structure including disposing off debris outside colony etc complete all as directed by the EIC.

Providing & fixing stainless steel Anchor fastner 12 mm dia. and 160 mm long (approx) of Hilti make HSL-3 or its equivalent including drilling holes to required depth, cleaning the same and fixing of fastner in proper position at all levels etc. complete all as per drawing/sketch, specifications and as per direction of the Engineer-in-Charge.

Structural steel work using M.S. YST 240 Grade of approved manufacture welded, riveted in built up sections, trusses staircase, railing, ladder and framed work for the following at all floors and locations, heights, including scaffolding, bracing, multilevel staging, lead etc. in grills, guard bars for windows, frames, covers, cover bracket fro slanting chajja etc. using specified structural steel sections like angles, tees, flats, bars, chequered plates, sheets channel/I section, M.S. Angle/tube/pipes/RHS/SHS, joists, bolts & nuts etc of requires shape, sizes including supplying, cutting, fabrication, welding, bending to shape, (curved), wastage, hoisting/erecting, fixing in position in concrete/brick work after fixing/embedding including painting one cat of zinc choramate prier over shop coat of approved anticorrosion primer and two coats of synthetic enamel paint of approved make and colour on as exposed surface etc. complete all as per specification and as directed by the EIC.

Description of Work / Item(s)

Amount

PART IV - PUBLIC HEALTH WORKS

Providing, laying, jointing, fixing, testing & painting heavy quality (Class 'C') M. S. galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges conforming to I. S. 1239-1968 & also as per the code of practice of water supply in buildings of I.S.2065-1972 including laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including removing the old damaged G.I. pipes & handing over to Deptt. stores, scaffolding, testing the pipes etc. complete all as per specification and as directed by the Engineer- in- Charge.

a) 15 mm n. b.

b) 20 mm n. b.

c) 25 mm n. b.

d) 32 mm n. b.

e) 40 mm n. b.

f) 50 mm n. b.

Labour charges only for carefully removing/ dismantling the existing G.I. Water supply pipe line in all sizes, along with its existing fittings at all floors and location including cleaning the pipes with thin rod, removing sand particles or miscellaneous other obstructions in pipes and fittings including labour charges for replacing the damaged/ unserviceable G.I. Pipes & fittings wherever found necessary including refixing the same in its original position in proper line, level and plumb with necessary specials/ fittings making threading's, jointing the pipes and fittings with hemp yarn, white zinc paste, clamping, testing the pipes & fittings for leakproofness and smooth working including returning the defective/ unserviceable materials to stores of maintenance Units etc. complete all as per specifications and as directed by the Engineer- in- Charge. NOTE: Necessary materials required for replacement shall be supplied by the Deptt. free of cost.

Providing and fixing EWC closet suit comprising: a) European water closet with 'P' or 'S' trap similar to Model- Slick of M/s. Hindware (Cat No. 20011) make Sanitary ware in white glazed vitreous chinaware. b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing off debris out side colony etc. complete all as per specification and as directed by the Engineer- in- Charge.

Providing & fixing approved WHITE Orissa pattern W.C. of M/s. Hindware make model no 20076 (ACUPAN) or approved equivalent with 'P' or 'S' trap in white glazed vitreous china ware of size 580 mm x 440 mm conforming to IS, including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete to the existing finish & disposing of debrils out side colony etc complete all as per specifications and as directed by the EIC. NOTE: In case of non availibility, other approved make as mentioned in Page 96 of 'Specification for Public Health Engineering Works' may be considered.

Providing and fixing approved Anglo-Indian water closet Comode · CATALOGUE NO: 20012 · SIZE: 57 x 46 x 38 cm · TRAP TYPE : P Trapwith 'P' or 'S' trap in white glazed vitreous china ware, including the cost of removing the existing damaged /broken one and making good the surroundings matching to the existing finish etc. complete all as directed by Engineer-in-Charge

Providing & fixing Vitreous China Urinal basin consisting following items of work :- I) Providing & fixing Urinal basin of following make as shown in the drawing or as directed by EIC with CP/SS screws, rawl plug, "Z" type brackets etc. as per manufacturer's recommendation including finishing with white/ matching colour cement etc. ii) Providing & fixing best / heavy quality CP brass Spreader, chrome plated Nozzle spray for flushing, CP brass inlet connection etc. including making connections all complete. ( providing & fixing inlet connection shall be paid under relevant item) iii) Cutting holes, making grove or chases in wall, floor, slab etc.& reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed. iv) Testing the system to the full satisfaction of Engineer in charge.

Vitreous China Urinal basin of Pastel colour, Hindware' cat. No. 60002 conforming to IS2556 ( part - VI ), 'Small ideal' model with 'Z'type brackets, CP Brass urinal spreader of 15mm dia of M/s. Jaquar or equivalent, CP brass Nozzle/ connector etc.

Providing & fixing in position following approved quality CP fittings / Fixtures of 15mm nominal dia. with ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specifications.

C.P brass 15 mm size auto closing Urinal Flushvalve with wall flange PRESSMATIC' as per'Jaquar' cat. PRS- 077.

Providing & fixing approved quality wash basin of M/s. JOHNSON or equivalent model similar in all features from M/s. CERA, Hindware, Parryware etc. with rims in white vitreous Chinaware supported on suitable wall brackets and of size mentioned below including cost of removing the existing wash basin and necessary C.I. brackets and anchor fastener shall be provided by the contractor including labour charges for fixing the existing fittings such as pillar cock, inlet connection, stop cock, wash coupling, bottle trap etc. & disposing off debris out side colony etc. complete all as per specifications and as directed by the Engineer-in-Charge.

a) 600 mm x 480 mm x 300 mm (approx.)

Providing & fixing approved quality wash basin of M/s. Cera Sanitaryware or other approved equivalent in white glazed vitreous Chinaware supported on suitable wall brackets and of size mentioned below including cost of removing the existing wash basin and fittings such as piller cock, inlet connection, stop cock, waste coupling, bottle trap etc. depositing serviceable material at Deptt. store & disposing off debris out side colony etc. complete all as per specifications and as directed by the Engineer- in- Charge.

i) 550 mm x 400 mm ( Approx. Size ) CORNET Cat No. 1008.

ii) 450 mm x 350 mm. ( Approx. Size ) CANON Cat No. S2040102

Providing and and fixing the stainless steel kitchen sink of Nirali' or equivalent make ( 610 mm x 510 mm x 200 mm ) (bowl size 535 x 432 x 200mm ) of approved quality including removing the existing old / damaged white glazed vitreous china ware sink, supported on pair of white enamel painted C.I. brackets / kitchen platform slab, including providing & fixing fittings such as waste coupling, plug , PVC flexible pipe etc. to the newly fixed size.

Providing & fixing heavy duty approved C.P. brass towel rod of M/s. Jaquar or equivalent make having size 600 mm x 20 mm with a pair of C.P. brass brackets, wall flanges C.P. brass brackets, wall flanges etc. fixed to wall with C.P. brass screws, screwed on to rawl plugs etc. complete including the cost of removing the existing one & returning to Stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Providing & fixing heavy quality 15 mm dia. inlet connection of M/s. BPI Make or equivalent with unions at the ends of PVC pipe with brass unions including the cost of removing the existing one etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) Size 600 mm long.

b) Size 450 mm long.

c) Size 450 mm to 600 mm long, SS Wire coated for hot water line.

Providing & fixing approved make heavy quality solid plastic seat in black/white shade with C.P. brass pillar hinges conforming to IS 2548 and including cost of removing the existing one depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

b) Solid plastic seat cover suitable for existing EWC.

Providing and fixing approved quality 10 Ltrs. capacity flushing cistern of M/s. Hindware/parryware/Cera or equivalent make conforming to relevant IS, with all internal fittings, pull string with handle, mounting on suitable MS/ CI brackets, painting brackets etc. including cost of removing the existing one and depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

High/Low level cistern. a) P.V.C. cistern conforming to IS.

Providing & fixing of C.P. Brass Health Faucet (Jet spray) with end rubber washer of M/s. Mahindra Sanitation make or equivalent (wt. not less than 200 gms) including providing & fixing C.P. metal wrapped- PVC flexible 15 mm dia pipe-1.00 m long with one end check nut & other end 32 mm long socket with washers for connecting the hand spary of make BPI or equivalent (wt. not less then 250 gms) complete all as per specifications & as directed by the Engineer- in- Charge.

Providing and fixing in position bevelled or plain edge mirrors made out of best Indian glass 6 mm thick of approved manufacture, mounted on asbestos cement sheet 6 mm thick fixed in position with 4 nos. C.P. brass screws with detachable C.P. brass caps washers, rawl plugs and including removing the existing one and depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) Size 600 x 450 MM.

b) Size 450 x 300 MM.

Providing & fixing in position 550x100mm wide & 6 mm thick Glass shelf with brass brackets of approved quality and fixing the Glass shelf on the wall to proper line & level using wall brackets with 40 mm long CP brass screws including making the wall to it's original condition and moulding of edges of glass etc. all as per specification & as directed by EIC.

Providing and fixing in position sintex tank over head tank, including required tools and tackles, overflow pipe mosquito brass jali, GI tank nipple for inlet and outlet, inlet float valve of brass rod and PVC ball (size: 25mm, Supreme make) transporting to location, cost for lifting, all fittings and accesaries required for installation, removing/cleaning the scrap materials from the site etc. as instructed by E.I.C.

Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to IS:778 with hand wheels at top including testing for 10 Kg./ Sqcm. pressure with clean and potable water with a minimum testing duration of two hours etc. including removing gun metal Gate valve & returning to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) 15 mm n. b.

b) 20 mm n. b.

c) 25 mm n. b.

d) 32 mm n. b.

e) 40 mm n. b.

f) 50 mm n. b.

Providing and fixing in position best salt glazed stone ware Gully Trap with 150 x 150 mm square inlet and 100 mm n.b. outlet conforming to IS:651 including embedding the trap in 1:4:8 cement concrete, 150 mm x 150 mm G.I. Grating at top, construction of brick masonry chamber 300 mm x 300 mm (internal) in 230 mm thick brick masonry, embedding the trap, plastering with cement mortar 1:4, 20 mm thick on inside, outside and all exposed faces, finished with a floating coat of neat cement, providing and fixing C.I. Frame and hinged cover weighing not less than 7 kgs, painting the grating, frame and cover with 2 coats of approved bit mastic paint etc. including removing the gully trap and disposing off debris out side colony etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Providing & laying 150 mm dia. salt glazed stone ware pipes and fittings of grade 'A' or 'AA' conforming to IS : 651 in trenches for all depths, to correct grade, levels and alignment including jointing with hemp yarn & cement mortar 1:1, testing and including removing & disposing off debris out side colony etc. complete all as per specifications and as directed by the EIC.

Providing & fixing M/s. BPI or equivalent make of following size PVC flexible pipe for wash basin and kitchen sink outlet including removing the existing & depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) 32 mm, 1000 mm long.

b) 40 mm, 1000 mm long.

Supplying and fixing following size PVC-SWR pipes and fittings for soil, waste, vent and rainwater pipe lines consisting following items of work:- i) Supplying PVC - SWR pipes and fittings conforming to IS 13592 of approved make and standard PVC clamps (approx. 3.2 mm thick) and nails or MS galvanised clamps having minimum 3 mm thick for fixing the pipe at c/c 1000mm min. ii) Fixing the pipeline vertically to plumb, keeping the pipe barrel 50 mm away from the wall face, using PVC or MS galvanised clamps. iii) Providing and fixing PVC Domed roof outlet (grating) for RWP & PVC cowl for waste/ soil pipe. iv) Jointing the PVC pipes and specials by PVC solvent cement, rubber lubricant with rubber rings or any other approved equivalent method. v) Laying the pipeline below the ground to proper slope and gradient for making connection of soil and vent pipeline (Vertical stacks ) with inspection chamber or manhole and waste water pipeline with gully trap chamber including the cost of cement mortar, water proofing compound etc. testing the vertical pipeline by smoke test and horizontal pipeline by 600 mm head of water and rectifying the leakages, if any all complete including encasing the pipe line using CC 1:3:6 etc. all complete. vi) Cutting or making hole in RCC or brick work and reinstating the surface to it's original condition after passing the pipe with cement mortar/ cement concrete etc. by adding approved water proofing compound. NOTE: Rate quoted shall be for each item including removal of existing damaged material and depositing to Deptt. Stores/ disposing off the debris out side Colony. PVC - SWR Pipe & Fittings ( TYPE-B )

a) 40 mm dia.

b) 75 mm dia.

c) 100 mm dia.

Labour charges only for carefully removal of all types of chokages at various floor/ levels from bath rooms, nahani trap, water closets, gully trap chambers, internal inspection chambers & drain pipes in service shafts of residential & non-residential buildings including cleaning the existing ACC & waste soil pipes, stone ware pipe, lead/ CP brass 'P' trap and bottle traps etc. of the above sanitary fixtures by the rodding or other suitable means like mechanical choke remover with KIWI Drainage chemicals, hand pumps and all other cost for incidental charges to complete the job, whenever found necessary, including thoroughly removing the dirt, sewer sludge and miscellaneous rubbish in and around the inspection chamber, gully trap & disposing off debris out side colony including washing the floor areas in service shafts with phenyl water all inclusive of labour, tools, phenyl etc. complete all as directed by the Engineer- in- Charge. NOTE: 1) The contractor shall make his own arrangements for opening & closing of plugs of cleaning eyes for waste, soil pipes, lead trap etc. at his own cost. 2) The chokages complaints shall be attended properly by the contractor by arranging sufficient number of labour commensurate with the magnitude of work involved. The labour shall be made available daily for full day for six working days a week during the working hours of the Maintenance Office. 3) The cement required for refixing the CI frame will be supplied by the contractor at his own cost. 4) The garbage/ waste removed shall be disposed to a dumping place out side the Anushaktinagar Colony.

a) Chokes in bath/ w.c./ kitchen & nahani Trap.

b) Chokage in gully trap.

c) Chokes in Manhole inspection chambers.

Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUREME/ PRINCE or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778. ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/ screws, rawl plugs, wooden gutties and branded clamps of Supreme/ Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joint or as per relevant code. iv) Making leak proof threaded/ solvent joints. including cutting the pipe, joint preparation, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damages to its original condition proof joints. vi) Providing and fixing C-PVC joinable/ threaded fittings such as Union, Nipples, Bends, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc. vii) Removing existing GI pipe line with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prine, Supreme or other equivalent approved by the Engineer- in- Charge including necessary fixing arrangement such as screws, plug etc. complete The measurement shall be taken along the centre line of pipes & fittings or specials. No measurement shall be recorded separately for fittings etc. SDR 11 Pipes and Fittings

a) 15 mm n. b.

b) 20 mm n. b.

c) 25 mm n. b.

d) 32 mm n. b.

d) 40 mm n. b.

Proving and fixing in position heavy pattern lifeline series SDR 11 Manufactured by M/s. Supreme or Prince Industries Ball Valve conforming to relevant IS codes with hand knob at top including testing for 10 Kg/ Sqcm pressure with clean and potable water with a minimum testing duration of two hours etc. including dismantling and removing existing Gun Metal Valves of various dia. (15 mm to 50 mm) etc. complete all as per specifications and as directed by the Engineer- in- Charge.

a) 20mm, Dia.

b) 25mm, Dia.

c) 32mm, Dia.

Supplying, installation, testing & commissioning PVC ball cock of following size with PVC Check nut, PVC washer & PVC knob with PVC ball of existing/ approved make of 5.0 kg/Sq.cm rating, including proving reducers / specials for fixing as required etc complete all as directed by the Engineer in charge.

a) 25 mm dia. With aluminum rod & PVC ball

b) 32 mm dia. With aluminum rod & PVC ball

Supplying of approved quality and make CP brass PH fittings of following types including wall flanges and necessary fittings & fixtures

(a) C.P brass Sink Tap with swinging casted Spout (wall mounted type ) similar to 'Continental series' of ' JAQUAR' Cat. No. 347

(b) C.P brass Bib tap with wall flange, .similar to 'Continental series ' of ' JAQUAR' Cat. No. 047

(c)Providing and fixing Angular Stop Cock with wall Flang similar to 'FLORENTINE Series' of ' JAQUAR' cat. No. 5053.

(d) C.P brass Pillar Cock 15 mm size having similar to 'Florentine' of 'JAQUAR' cat. No. 5011

(e)C.P brass Pillar Cock 15 mm size having auto closing system similar to pressmatic Piller cock Cat. No. PRS-CHR-031of 'JAQUAR'

(f) Concealed Stop Cock with wall Flang similar to 'FLORENTINE Series' of ' JAQUAR' cat. No. 5083

(g)Providing and Fixing C.P brass long body Bib tap 2 in 1 similar to . 'FLORENTINE Series' of ' JAQUAR' cat. No. 5041 including 'providing and fixing Health faucet with 1.0 mt long flexible tube and wall hook ( JAQUAR make Cat No. 573).

Providing & fixing C.P. brass bottle trap with C.P. brass extension piece & wall flange etc. complete 32 mm n. b. including removing the existing one & depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Providing & fixing C.P. metal wrapped- PVC flexible 15 mm dia. pipe 1.00 m long with one end check nut and other end 32 mm long socket with washers for connecting the hand spray of make BPI or equivalent (wt. not less than 250 gms) complete all as per specifications & as directed by the Engineer- in- Charge.

Providing & fixing 125 mm dia S.S. grating for Nahani trap with necessary cement mortar 1:4 & matching cement and including removing existing grating, disposal of debris outside colony etc complete all as per specifications and as directed by the Engineer in charge.

Providing and fixing heavy quality 15 mm n. b. C.P. brass screw down stop cock of easy clean variety including removing the existing and depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Providing & fixing 32 mm/ 40 mm dia. heavy quality C.P. brass waste coupling with plug & chain including removing the existing & depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Supplying Material "White Pvc Teflon Tape" ( One Box 10 Nos Teflon Tap )

Providing and fixing PVC flush pipe Everlas or equivalent of 32 mm dia. up to a length of 2.25 M (approximate) and connecting to the flush tank with proper brass check nut and connecting to the W.C. pan and making leak proof joints of flush and W.C. ends and including removing the existing one etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Providing & fixing SWR PVC Nahani trap of self cleansing design with 75 mm outlet having a minimum water seal of 50 mm with C.I. Grating on top including necessary 1:2:4 cement concrete for embedding the trap, conforming to IS:3989, including removing the existing one & depositing to Deptt. stores etc. complete all as per specifications and as directed by the Engineer- in- Charge.

Suupyling 1 Kg Packet of white cement of M/s. Birla white/M/s. J K White or equivealant including loading unloading in different location under CHEMBUR, Maintenance Unit. complete all as per specifications and as directed by the Engineer-in-Charge.

Description of Work / Item(s)

Amount

PART III : REBATE ITEMS

Rebate for taking away dismantled item by the contractor. Note: 1. Quantities shall be same as measured and paid for relevant items. 2. Measured and paid volume of teak wood shall be converted into mass @ 800 Kg/ Cum.

a) Teak wood

b) Scrap wood

c) Panelled/ flush door shutter up to 38 mm thick.

CP brass PH items like bib tap, pillar cock, stop cock, towel rod, shower rose and waste coupling etc.

i) Bib tap

ii) Stop cock

iii) Pillar tap.

iv) Bottle trap.

v) Waste couplings

vi) Towel rod.

GI/ CPVC pipes.

i) 15 mm n. b.

ii) 20 mm n. b.

iii) 25 mm n. b.

iv) 32 mm n. b.

v) 40 mm n. b.

vi) 50 mm n. b.

CI & PVC pipes.

i) 75 mm dia.

ii) 100 mm dia.

GM gate vales up to 50 mm dia.

i) 15 mm n. b.

ii) 20 mm n. b.

iii) 25 mm n. b.

iv) 32 mm n. b.

v) 40 mm n. b.

vi) 50 mm n. b.

PVC flushing cistern

Scap Aluminium.

Scrap MS Material

SUNLIGHT CORPORATION

Omkareshwar Construction

Omkareshwar Construction

SUNLIGHT CORPORATION

SUNLIGHT CORPORATION

Omkareshwar Construction

MARC CONSTRUCTION

Omkareshwar Construction

Omkareshwar Construction

SUNLIGHT CORPORATION

Omkareshwar Construction

MARC CONSTRUCTION