1) Electrical general work for Chatra - Upgradation and modernisation of Chatra goods sheds over Howrah Division under Sr.DEN/4/HWH. 2) Electrical (general) work in connection with Upgradation and modernization of Rajgram Public Siding goods shed over Howrah Division under Sr.DEN/4/HWH. 3) Electrical general work for Upgradation and modernisation of Sainthia goods sheds over Howrah Division under Sr.DEN/4/HWH. 4)Electrical General work for Upgradation and modernization of Kulapahari (Tilbhita) goods sheds over Howrah Division under Sr.DEN/4/HWH. 5)Electrical General work for Upgradation and modernisation of Pakur goods sheds over Howrah Division under Sr.DEN/4/HWH.

A- 1) NAME OF THE WORK :- Electrical general work for "Chatra -

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 1 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 2 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 4 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core, HRFR / FRLS grade, PVC insulated, copper 5 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat. No.- ACPU 6M- BT or equivalent ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 6 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 7 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 10 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 11 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 12 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP 19 MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, 21 complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 100mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 23 copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 450 x 375 x 24 200 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 25 sheet thickness - 3mm ) Pole of overall length 7 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 26 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 27 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 30 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 37 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 38 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent 39 with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protection release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protection release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 Amp, 41 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job.l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 43 AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section. 44 The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 45 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 46 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range ( 25-32A ), 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Bore well submersible Pump Motor set of pump discharge capacity approx 6.5 LPS ( approx. 5000 GPH ) and discharge head 111 Mtrs. ( approx. 364 Ft ), complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 3 Phase, 48 415V, 50Hz, AC supply system with stainless steel coupling and all other accessories such as total 120 M length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one non-return valve,one pressure gauge, one flow meter, two pairs erection clamps, one delivery sluice valve etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully 50 Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 111 M head ) pump motor including installation, fixing, connection and commi- ssioning (Similar to L&T Type - MU- G15 FASD Starter, Cat.No.- CS94091 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Centrifugal Self Priming Mono Block Pump with discharge range 270 - 35 LPM 54 at 15 - 30 Mtr. Head of motor capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50Hz supply system including installation, testing and commi- ssioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )

Supply of On Load Manual Change Over Switch of capacity 63 A, 415V, 50Hz, 4P 55 complete with all accessories fitted in metal enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 56 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary masonry work.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 58 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 59 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

B-Schedule : 2) NAME OF THE WORK :- Electrical (general) work in

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 60 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 61 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 62 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Trenching and laying of cable under ground by soil cutting with covering of cable by 63 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 69 sheet thickness - 3mm ) Pole of overall length 5 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 70 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 71 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 72 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 73 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 74 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 75 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and 76 neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat. No.- ACPU 6M- BT or equivalent ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 77 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 78 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP 87 MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP MCB, of current rating 63A, 10kA, 415V, 50Hz. ( Make of MCB, FP MCB and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 91 AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 250 x 250 x 92 155 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 700 x 480 x 93 210 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 94 copper busbar of each bar of capacity 200 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of 95 appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 96 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 97 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor 99 protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, 4 Pole, ( 63 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, Microprocessor Release with above features of Release Range 25-63A, 4 Pole, breaking 101 capacity 36 kA at 415V, AC 50Hz ( Ics = 100% Icu ) - 4 nos. c) Tinned Copper Busbar ( 4 Bar ) each of capacity 200 Amps., 415V, 50 Hz. - 1 set d) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. e) CT of suitable ratio for MFM - 18 nos. f) LED indication lamp for Phases and "ON & OFF" indication - 12 nos. e) Petty Store for cable gland, socket, fuse etc. - 1 job complete with all other accessories, internal wiring and fabrication work for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Bore well submersible Pump Motor set of pump discharge capacity approx 6.5 LPS ( approx. 5000 GPH ) and discharge head 111 Mtrs. ( approx. 364 Ft ), complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 3 Phase, 103 415V, 50Hz, AC supply system with stainless steel coupling and all other accessories such as total 70 M length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one non-return valve,one pressure gauge, one flow meter, two pairs erection clamps, one delivery sluice valve etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 111 M head ) pump motor including installation, fixing, connection and commi- ssioning (Similar to L&T Type - MU- G15 FASD Starter, Cat.No.- CS94091 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 109 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 110 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply of On Load Manual Change Over Switch of capacity 63 A, 415V, 50Hz, 4P complete with all accessories fitted in sheet steel enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary masonry work.

Supply of Submersible Sewage Pump-Motor set of discharge capacity 92 Cubic metre per hour and discahrge head 9 Mtrs. (approx.) suitable for operation on 415V, 50 Hz, 3Ph / 240V, 50 Hz, 1 Ph supply system complete with one fully automatic starter control panel with all protection and 113 float switch alongwith 10 Mtrs. long multicore copper flexible cable of suitable size for motor operation, 5 mtr. Lifting Iron Chain, GI clamps, steel wire rope with double pulley, PVC flexible pipe of suitable size and length including installation and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Supply of MCB of breaking capacity 10 kA at 230V AC, 50Hz of capacity 63A, 2 Pole complete with metal enclosure including fixing, connection, testing and commissioning. ( Make - L&T /Siemens / ABB / Hager / Legrand / Schneider / C&S / Havells )

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 115 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

C-Schedule : 3) NAME OF THE WORK :- Electrical general work for

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 116 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 117 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 118 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 119 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 120 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat. No.- ACPU 6M- BT or equivalent ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 121 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 122 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 126 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 127 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 128 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP 134 MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, 136 complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 100mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 138 copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 450 x 375 x 139 200 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 140 sheet thickness - 3mm ) Pole of overall length 7 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 141 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 142 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 145 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 153 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100 KVA to 125 KVA Load :- a) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protechtion release, used as bus coupler isolation - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, 154 "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 6 nos. h) CT of suitable ratio for MFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. k) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 156 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 158 AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of 159 appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 160 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr. height with all complete accessories i.e. all integral power tool, control panel, flood light fittings w ith lantern carriage of High Mast Tower including design and construction of RCC foundation 161 depending upon the height, wind speed and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 162 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Bore well submersible Pump Motor set of pump discharge capacity approx 6.5 LPS ( approx. 5000 GPH ) and discharge head 111 Mtrs. ( approx. 364 Ft ), complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 3 Phase, 164 415V, 50Hz, AC supply system with stainless steel coupling and all other accessories such as total 120 M length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one non-return valve,one pressure gauge, one flow meter, two pairs erection clamps, one delivery sluice valve etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully 166 Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 111 M head ) pump motor including installation, fixing, connection and commi- ssioning (Similar to L&T Type - MU- G15 FASD Starter, Cat.No.- CS94091 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Centrifugal Self Priming Mono Block Pump with discharge range 270 - 35 LPM 170 at 15 - 30 Mtr. Head of motor capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50Hz supply system including installation, testing and commi- ssioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )

Supply of On Load Manual Change Over Switch of capacity 63 A, 415V, 50Hz, 4P complete with all accessories fitted in metal enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 172 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary masonry work.

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 174 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 175 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

D-Schedule : 4) NAME OF THE WORK :- Electrical General work for

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 177 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 185 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 186 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of 187 appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 188 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr. height with all complete accessories i.e. all integral power tool, control panel, flood light fittings w ith lantern carriage of High Mast Tower including design and construction of RCC foundation 189 depending upon the height, wind speed and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum sheet thickness - 3mm ) Pole of overall length 7 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 191 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 192 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 196 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and 197 one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 198 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 199 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 200 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 202 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 203 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 204 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat. No.- ACPU 6M- BT or equivalent ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 205 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 206 conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP 215 MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, 217 complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 100mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 219 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 221 copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 222 copper busbar of each bar of capacity 200 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following items : a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) 223 Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 63 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 4 nos. d) Change over switch 400A, 4P, 415V, 50 Hz - 1 No. e) Change over switch 63A, 4P, 415V, 50 Hz - 1 No. f) MCB 4 Pole, 32 Amp, 415V, 50 Hz, 10kA C-curve - 2 nos. g) Power Contactor, 3 Pole, 12A, 415V, 50Hz - 2 nos. h) Astronomical Timer Switch - 2 nos. i) MCB 2 Pole, 10 Amp, 415V, 50 Hz, 10kA C-curve - 4 nos. j) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. k) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. l) CT of ratio 400/5A for MFM - 6 nos. m) CT of ratio 250/5A for MFM - 6 nos. n) CT of ratio 100/5A for MFM - 12 nos. o) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 30 nos. p) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. q) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protection release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 Amp, 225 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, 4 Pole, ( 63 - 160 227 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, Microprocessor Release with above features of Release Range ( 16-40 )Amp., 4 Pole, breaking capacity 36 kA at 415V, AC 50Hz ( Ics = 100% Icu ) - 6 nos. c) MCCB, 4 Pole, 125 Amp, 415V, 50Hz, 36kA, without protection release, used as Bus Coupler isolation - 1 no. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz. - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for Phases and "ON & OFF" indication - 32 nos. h) Petty Store for cable gland, socket, fuse etc. - 1 job i) complete with all other accessories, internal wiring and fabrication work for above panel - 1 job ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 229 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 230 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc.including installation, testing and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 231 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of above bore well Ssubmersible pump

Supply of Bore well submersible Pump Motor set of pump discharge capacity approx 6.5 LPS ( approx. 5000 GPH ) and discharge head 111 Mtrs. ( approx. 364 Ft ), complete with water 233 cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 3 Phase, 415V, 50Hz, AC supply system with stainless steel coupling and all other accessories such as total 70 M length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one non-return valve,one pressure gauge, one flow meter, two pairs erection clamps, one delivery sluice valve etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully 235 Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 111 M head ) pump motor including installation, fixing, connection and commi- ssioning ( Similar to L&T Type - MU- G15 FASD Starter, Cat.No.- CS94091 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Centrifugal Self Priming Mono Block Pump with discharge range 270 - 35 LPM 239 at 15 - 30 Mtr. Head of motor capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50Hz supply system including installation, testing and commi- ssioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )

Supply of On Load Manual Change Over Switch of capacity 63 A, 415V, 50Hz, 4P complete with all accessories fitted in metal enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 241 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 242 AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 700 x 480 x 243 210 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 250 x 250 x 244 155 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary masonry work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

E-Schedule : 5) NAME OF THE WORK :- Electrical General work for

Laying of cable underground through 100 mm diameter HDPE pipe by Micro Tunneling cable laying method including supply and jointing of HDPE pipe. ( Cable will be supplied by Railway )

Trenching and laying of cable under ground by soil cutting with covering of cable by 248 sand and bricks / through suitable dia HDPE pipe including supply of HDPE pipe without bricks alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 50 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Trenching, laying under road / track through 100 mm dia GI pipe ( medium gauge ) including supply of GI pipe and commi- ssioning of cable including back filling of trench with excavated soil after laying of cable ( Cable will be supplied by Railway )

Drawing of cable on wall / structure with suitable size and shape GI clamps and commissioning of cable ( Cable will be supplied by Railway )

Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway )

Supply of heavy gauge GI fabricated Cable tray with GI supporting structure and GI nut-bolts and washer of suitable sizes as per site requirement including fixing and commissioning.

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 256 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 50-95 sq.mm., 1100V grade complete with all accessories including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of Straight Through jointing kits ( Heat shrinkable ) suitable for XLPE / PVC 257 insulated stranded Aluminium conductor cable of size 4 / 3.5 x 120-185 sq.mm., 1100V grade complete with all accessories 'including jointing, testing and commissioning. ( Make - m-seal / Raychem / Mahindra / Densons / 3M )

Supply of High Mast Tower of 20 Mtr. height in two sections suitable for a wind speed of 180 km/Hr. ( 50 m/s ) made from Steel Plates and continuously tapered of polygonal cross section. The entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with BS 729. All steel used in the construction of mast complies with BS EN 10 025 of appropriate grade and welding is in accordance with BS 5135 and comprising with lighting finial & earthing terminal, Top pulley assembly, double drum winch, Head frame & lantern carriage, stainless steel wire rope having 7/19 construction ( The central core is also SS ) with a grade of AISI 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

Design and construction of RCC foundation depending upon the height, wind speed 259 and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Dismantling, shifting, repairing and reinstallation of defective High Mast Tower of 20 Mtr. height with all complete accessories i.e. all integral power tool, control panel, flood light fittings w ith lantern carriage of High Mast Tower including design and construction of RCC foundation 260 depending upon the height, wind speed and terrains including erection, testing and commissioning of above High Mast Tower including foundation accessories alongwith Earthing with 2 nos. of 50mm dia, 3 Mtrs. long heavy gauge GI pipe ( Make - TATA / Jindal / Bansal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm GI flat with GI nuts & bolts.

Supply of GI ( minimum coating thickness 65 microns ) conical / octagonal ( minimum 261 sheet thickness - 3mm ) Pole of overall length 7 M with single / double arm bracket, top cover, base plate including hinged door-inbuilt Junction box complete with copper bar, insulator, Hylam sheet for cable termination and fuse kit-kat / MCB ( Make - Utkarsh / B.P. Projects / Crompton / Bajaj / Surya )

RCC foundation, erection and commissioning of above GI pole with construction of 262 cement concrete muffing ( Cement : Stone : Sand = 1 : 2 : 4 ) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 M long GI pipe ( Make - TATA / Jindal / Bansal ) with necessary earth connection from pipe to pole by GI Strip / GI wire

Wiring of light point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral through pole from inbuilt pole 263 Junction Box's porcelain fuse kit-kat / MCB to light fitting along with 1 no. single core HRFR / FRLS grade, PVC insulated copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Dismantling / Cutting of existing pole and make good of surface including transportation from site to stores

Fixing, connection and commissioning of out door LED Flood light / Street Light fitting on High Mast Tower / Pole / Structure with suitable arrangement. ( LED Street / Flood light fitting will be supplied by Railway )

Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall ( LED Street / Flood light fitting will be supplied by Railway )

Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper 267 conductor cable of size 10.0 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and one neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral 269 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 270 in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral 271 in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 6A / 5 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V 272 grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of 16A / 6 pin Plug board consisting with one 16A plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. 273 mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Multi Plug board consisting with three nos. 6A / 5 pin plug socket, three nos. 6A switch, one no. 16A / 6 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one 274 indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no single core, HRFR / FRLS grade, PVC insulated, copper 275 conductor cable of size 2.5 sq.mm, 1100V grade for earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB , one single phase starter and one 25A socket and plug with indicating light similar to NORTH-WEST Cat. No.- ACPU 6M- BT or equivalent ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper 276 conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 10.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition

Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition

Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) )

Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement. ( LED indoor light fitting will be supplied by Railway )

Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement ( BLDC Ceiling Fan will be supplied by Railway )

Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut & bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway )

Installation, connection and commissioning of Wall Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( AC Wall Bracket Fan will be supplied by Railway )

Installation, connection and commissioning of Air Circulator Bracket fan with GI clamps made of GI flat of suitable size and GI nut-bolts on wall / structure. ( Air Circulator Bracket Fan will be supplied by Railway )

Supply of SPN DB ( Metal Enclosure ), 6 way, 1Ph, 240V, 50Hz, complete with 4 nos. SP 286 MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP RCBO of current rating 40A, 100mA, 10kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of TPN MCB DB ( Metal Enclosure ), 3Ph, 4 way per phase, 415V, 50Hz, 288 complete with 4 nos. SP MCB of current rating from 6A to 32A, 10kA, 240V, 50Hz per phase as per requirement of load and 1 no. FP RCBO, of current rating 63A, 100mA, 10kA, 415V, 50Hz. ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S / Havells )

Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement.

Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of 290 breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 292 copper busbar of each bar of capacity 100 Amp, 4 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of Dust and vermin proof metal Busbar Chamber consisting of 4 nos. tinned 293 copper busbar of each bar of capacity 200 Amp, 6 way, suitable for 415V, 50Hz supply system including all accessories alongwith fixing, connection, testing and commissioning of incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement ( Make - Havells / Standard / HPL / C&S )

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 250 KVA to 300 KVA Load :- a) MCCB, 4 Pole, ( 160 - 400 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 63 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with above mentioned features - 4 nos. d) Change over switch 400A, 4P, 415V, 50Hz - 1 no. e) Change over switch 63A, 4P, 415V, 50Hz - 1 no. f) MCB 4 Pole, 32 Amp, 294 415V, 50 Hz, 10kA C-curve - 2 nos. g) Power Contactor, 3 Pole, 12A, 415V, 50Hz - 2 nos. h) Astronomical Timer Switch - 2 nos. i) MCB 2 Pole, 10 Amp, 415V, 50 Hz, 10kA C-curve - 4 nos. j) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. k) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. l) CT of ratio 400/5A for MFM - 6 nos. m) CT of ratio 250/5A for MFM - 6 nos. n) CT of ratio 100/5A for MFM - 12 nos. k) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 30 nos. l) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. m) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 150 KVA to 200 KVA Load :- a) MCCB, 4 Pole, ( 100 - 250 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, 4 Pole, ( 40 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 2 nos. c) MCCB, 4 Pole, ( 25 - 100 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release similar to iTRP3 type of LK (L&T)-make or equivalent with above mentioned features - 4 nos. d) MCCB, 4 Pole, 250 Amp, 415V, 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. e) RCBO, 4 Pole, 32 296 Amp, 415V, 50Hz, 10kA, "Sensitivities - 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. f) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, "Sensitivities- 300 mA , Suitable for AC + Pulsating " DC (Type A) + Harmonics - 4 nos. g) Tinned Copper Busbar (4 Bar) each of capacity 400 Amps., 415V, 50 Hz. - 1 set. h) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 8 nos. i) CT of suitable ratio for MFM - 24 nos. j) LED indication lamp for 3-Phases for incoming feeders and "ON, OFF & TRIP" indication for all incoming and outgoing feeders - 48 nos. k) Petty Store for control cable, MCBs, gland, socket, fuse, push button, TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc. - 1 job. l) Fabrication work for above panel including internal wiring - 1 job. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply of LT cubicle Outdoor Type Wall Mounted Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB, 4 Pole, ( 63 - 160 )Amp, 415V, 50Hz, 36kA, ( Ics = 100% Icu ) Microprocessor based release with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt Ground Fault protection, 4) Inbuilt Instantaneous protection, 5) Adjustable neutral overload protection, 6) Provision of Thermal Memorry, 7) Microprocessor protection-based MCCB must have facility of individual 'LSIG' fault indication - 2 nos. b) MCCB, Microprocessor Release with above features of Release Range ( 16 - 40 )Amp, 4 Pole, breaking capacity 36 kA at 415V, AC 50Hz ( Ics = 100% Icu ) - 6 nos. c) MCCB, 4 Pole, 125 Amp, 415V, 298 50Hz, 36kA, without protechtion release, used as Bus Coupler isolation - 1 no. d) Tinned Copper Busbar ( 4 Bar ) each of capacity 150 Amps., 415V, 50 Hz. - 1 set e) Static Multifunction panel mounting LED Energy Meter suitable for operation on 3Ph, 415V, 50Hz supply, Cl 1 with provision of RS485 communication port having display parameters - V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events ( High-Low ), Neutral Current, K Factor - 2 nos. f) CT of suitable ratio for MFM - 24 nos. g) LED indication lamp for Phases and "ON & OFF" indication - 32 nos. h) Petty Store for cable gland, socket, fuse etc. - 1 job i) complete with all other accessories, internal wiring and fabrication work for above panel - 1 job ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) ( Make for Energy Meter - Secure / LK (L&T) / Genus / Conzerv / Stelmec / HPL / Socomec / Anchor )

Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection with all suitable arrangement

Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast 300 Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10%

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 301 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc.including installation, testing and commissioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Supply of energy efficient bore well submersible pump-motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other 302 accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of GI column pipe - Tata / Jindal / Bansal ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of above bore well Ssubmersible pump

Supply of Bore well submersible Pump Motor set of pump discharge capacity approx 6.5 LPS ( approx. 5000 GPH ) and discharge head 111 Mtrs. ( approx. 364 Ft ), complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 3 Phase, 304 415V, 50Hz, AC supply system with stainless steel coupling and all other accessories such as total 120 M length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one non-return valve,one pressure gauge, one flow meter, two pairs erection clamps, one delivery sluice valve etc. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab / Bonton )

Installation, testing and commissioning of Submersible Pump-Motor set ( 5000 GPH ) and column pipe, supporting clamps and other accessories.

Supply of Submersible pump Controller in sheet steel enclosure incorporated with Fully 306 Automatic Star-Delta Starter suitable for 11 KW / 15 HP, 3Ph, 415V, 50Hz ( 5000 GPH x 111 M head ) pump motor including installation, fixing, connection and commi- ssioning (Similar to L&T Type - MU- G15 FASD Starter, Cat.No.- CS94091 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Supporting Clamps for holding column pipe made of GI flat of size 400mm x 100mm x 12mm along with GI nuts and bolts

Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of heavy gauge GI pipe of dia 75mm with one end socket as per IS:1239 (Part I) of 1990 or latest. ( Make - Tata / Jindal / Bansal )

Supply of Centrifugal Self Priming Mono Block Pump with discharge range 270 - 35 LPM 310 at 15 - 30 Mtr. Head of motor capacity 1.1 KW/1.5 HP suitable for operation in 1 Ph, 220-250V, 50Hz supply system including installation, testing and commi- ssioning. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )

Supply of On Load Manual Change Over Switch of capacity 63A, 415V, 50Hz, 4P complete with all accessories fitted in metal enclosure including fixing, testing and comissioning ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Junction Box made of 14 SWG GI sheet of size 450 mm x 300 mm x 250 mm consisting with 2 nos. 63A porcelain fuse units (kitkats) conforming to IS:2086 -1993 complete with 312 hinged door with locking arrangement duly painted with two coats of paint after one coat of anti- corro- sive Red Oxide paint as per Sr. DEE/G/HWH's Drawing No. MISC / E / 2 / 05 including fixing, connection and commi- ssioning of above Junction Box on AT Mast with GI clamps made of GI flat of size 40mm x 6mm with GI nuts-bolts.

Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V 313 AC, 50Hz of capacity 25-32A / 32-40A / 40-50A, 4 Pole complete with metal enclosure with spreader terminals, including fixing, connection, testing and commissioning. ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 700 x 480 x 314 210 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply of Sheet Moulded Compound ( SMC ) JB box, fire retardant of size 250 x 250 x 315 155 mm ( IP-55 ) including fitment with suitable size and shape Mild Steel ( MS ) bracket by replacing existing damage box and accessories with testing and commissioning. ( Make : Hensel / Sintex / OBO Bettermann / RMC / EPP Composites )

Supply, design, fabrication, installation and commissioning of iron grill duly painted by one coat of anticorrosive red-oxide and two coats of synthetic enamel paint for protection of water cooler including plinth construction, water pipe line work and necessary massonary work.

Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - 317 Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard

F-GST as applicable ( At present @ 18% )( For Schedule A , Schedule

Goods & Services Tax ( at present @ 18% )