8341 REPAIR TO PATH DRAIN FENCING COMPOUND WALL IN CERTAIN AREAS OF AGE BR II UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete in ground floors and paving n exc 15cm (below or above groiund) and inclusive of removal of debris out side defence land complete

M&L for 100mm plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of interlocking tiles complete all as specified and directed

M&L for rubber moulded glossy coloured chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floors over and including 15mm thick screed bed in cement mortar 1:6 complete

M&L for Shingle filling (size of particles less than 6mm) laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering for laying interlocking tiles below interlocking tiles complete all as specified complete

M&L for 100mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in hard standing laid in alternate bays including necessary form work complete all as specified and directed

M&L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in precast kerb stone including chamfers weathering set in cement mortar 1:4 and joints to match with CM 1:3 complete all as specified and directed by engineer in charge

M & L Rough excavation not exceeding 1.5 m deep and getting out in soft/ loose soil

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground and inclusive of removal of debris out side defence land or removal to store complete

Dismantling fencing wire mesh, any type and inclusive of removal to store complete

Excavating in post holes in soft / loose soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete

M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete

S&F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting, embedding in cement concrete, MS flat at bottom etc and similar work confirminng to Fe-290 Gde E-165 complete

S&F MS flats (40x6mm) as bands, straps, supports or stays for securing chain link fencing to angle iron posts and welded to post in PCC during embedding complete

S&F for mild steel round bars 10mm dia and over, cut to length, bent to shape required conforming to Fe-410W Gde E-250 complete

S&F Mild steel screws bolts 11 to 15mm dia of neck (machine made) with hexagonal or square heads at one end and screwed at the other end, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and dia diameter of neck 5 to 10mm complete

S&F MS galvanised chain link, fencing of 4mm dia wire and mesh size 50 x 50 mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossing with and provision of galvanised mild steel wie, staples or steel pins etc as directed each line wire to be measured) complete

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in hard / dense soil.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil

Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided and inclusive of removal of debris out side defence land complete

M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete

Ditto as per item No 28 above but 8 to 10mm dia as in stirrups complete

Use & waste formwork to side of concrete founation footings, base of column, plinth beam and similar work of rough finished the surface of concrete

Use & waste formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete

Use & waste formwork to chajja, roof beams, lintels and soffits of roof projections etc and similar items including edges complete.

M&L for reinforced cement concrete nominal mix B1 1:2:4 (using 20mm graded stone aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete

M&L for reinforced cement concrete nominal mix B1 1:2:4 (using 20mm graded stone aggregate) for columns, pillars, piers, posts and struts etc complete

M&L for reinforced cement concrete nominal mix B1 1:2:4 (using 20mm graded stone aggregate) for roof beams and lintels complete

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris out side defence land complete

Demolition of precast cement concrete walling builit in built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

M&L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete.

M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in cills, steps, bands, plinth courses, string courses, lacing courses, coping kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles etc complete.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches if ordered complete all as specified and directed

M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint all as directed and specified.

Dismantling of structural steel work including doors,gates but excluding framed Truss etc and removal to store complete all as specified

M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete

M&L for 15mm thick rendering in CM 1:4 over PCC block wall surfaces including provn of sagol finish on plastered surface complete

M & L for 50mm thick cement concrete type C2 (1:3:6) using 40mm graded stone aggregate as in surface channel/flooring finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 300mm bore, jointed in cement mortar and taking out from trenches, if required complete.

M&L for 300mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars

M&L for cement concrete bed type C2 1:3:6 (using 40mm graded stone aggregate) to drain pipes 300 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as directed.

Dismantling of cast iron or reinforced concrete drain pipes 150mm dia, jointed in cement mortar and taking out of trenches, if required complete

M&L for cement concrete with type C2 1:3:6 (using 40mm graded stone aggregate) to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with colars laid in trenches and jointed as specified complete

M&L for Cement concrete type C2 1:3:6 (using 40mm graded stone aggregates) in foundations, filling and mass concrete complete

M&L for reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete

S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

All as per item No 55 above but portion ordered for ornamental and intricate design complete all as specified and directed by Engineer-in-Charge.

TULSAYA CONSTRUCTION

durga consrtruction

Sai Construction

Suraj Sukhdev More

Vijay Construction and Company

Pratap enterprises

Parhar Enterprise

ANIL CONSTRUCTION CO.