PROVN OF COVERED HARD STANDING 10MX8M WITH DRAINAGE ELECTRICAL FITMENT FOR 500 LPM CAP PSA OXYGEN GENRATION PLANT AT MH AGRA UNDER GE WEST AGRA

Amount

Surface excavation 30cm deep and averaging 15 cm deep getting out in soft/loose soil complete all as specifed & as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation fillings and mass concrete complete all as specified and directed.

M&L 100 mm thick plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

Use & wasteof formwork to edges of concrete flats for rough finished surfaces complete all as specified and directed.

M&L forming dummy joint 30 mm deep 10 mm wide saw cut filled with sealing compound grade 'A' complete all as specified and directed.

M&L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

Excavating in post holes (or similar holes) in loose/soft soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified & as directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F roof trusses sections conforming to Gde Fe-410-0 ( Gde 250 quality -A) (framed), trussed, purlins, crane gantries, rails, tubular post and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F joist, channel, angle, flate iron or tee sections conforming to Gde Fe-410-0 (Gde 250 quality -A), fixed independently, without connecting plates etc (cut to ordinary lengths i.e., within 20 mm of the length complete all as specified and directed.

S&F for rolled section as in main and cross beams, purlins, rafters where connected to common rafter and running rails etc conforming to Fe- 410-w complete all as specified and directed.

S&F for plate (plane or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe- 410-w complete all as specified and directed.

S&F of mild steel screw bolts of diameter of neck 16 to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 22.5 cm and n exc 30 cm long complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavation in trenches not exceeding 1.5m depth and n.exc 1.5m width for foundation etc and getting out in soft/loose soil all as specefied and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM (1:4) all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in benching etc to bottom of drain complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in coping etc including use & waste of form work complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick wall fair & even complete all as specified and directed.

M&L providing precast cover slab RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) for manhole/ drain/chamber cover set in cement mortar 1:6 complete all as specified and as directed. Note: Reinforcement will be measured & paid separately

M&L mild steel TMT bar 10mm dia and over cut to length bend to shape spirally for hooking for column and hooking ends and binding with mild steel wire not less than 0.9mm dia complete all as specified and as directed.

S&Fchain link MS galvanised fencing, any size or type all as specified and directed.

M&L mild steel round bar 10mm dia and over cut to length bend to shape spirally for hooking for column and hooking ends and binding with mild steel wire not less than 0.9mm dia complete all as specified and as directed.

S&F mild steel work in framed work such as grill etc with ends of bars shouldered and/ or riveted or forged into spikes framed garder bar, bared ironed door hung as gate including pintle hings stops and made sliding bolt and similar work confirming to FE 290 gdg-E-165 complete all as specified and as directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as above item No-26 but one socket out let 3/5 pin, 5/6 Amps controlled by one 1way switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

All as per item No-26 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by 1 one way on the same board with other switches complete all as specified & directed.

All as per item No-1 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item No 26 to 29: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Coloumns / Beams / Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches, sockets, regulators, lamp holders, light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.38058 or equivalent as approved by GE.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.39991 or equivalent as approved by GE.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed. Make: Anchor Cat No.38320 or equivalent as approved by GE.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. Make: Anchor Cat No.39994 or equivalent as approved by GE.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed. Make -Anchor CAT Part No-39072 or equivalent as approved by GE.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed. Make: Anchor Cat No. 39797/ 39800 or equivalent as approved by GE.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed. Make: Anchor Cat No.38284/38660 or equivalent as approved by GE.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed. Make :- Havells cat Part No. LHLDDEEEML8R015 or equivelant model of Baja/Wipro/CG.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having Aluminium housing and integrated electronic driver with mounting accessories, 6500K color temprature complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-LUMILINEPLUSBS20WLED865SPCSS,Phillips cat part no BN021C LED20S PSU CW GR S2 or equivalent as approved by GE.

Supply & fix, outdoor street light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- ENDURAPEARLNEOSL40WLED757PASYTOPC,Phillips cat part no BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent as approved by GE.

Supply & fix, surface mounting type bulkhead 10 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- Cat part No FT10WLED857SSYMBOPC or equivalent model of make Philips/ Bajaj/ Crompton Greaves as approved by GE.

M&L of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 2.5 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Supply and fixing of wall mounted type cuvical LT pannel board duly febricated frame work with 40/6 mm angle iron of approximate size 1.2 mtr x 1.5 mtr x 0.6 mtr and covering with 2 mm thick CRCA sheet duly paint with one coat of red oxide primer and two coats of powder coated of disired colour sets suitable for housing and includding the following fitment items :- (a) INCOMMER :- (i) MCCB TPN 25 KA 200 Amp, 415 Volts, 50 Hz, DPX³ 250 Make- Legrand Cat Part No. 4202 08 or equivelant model of L&T / Havrells, ABB. - 01 No. (ii) Aluminum bus bar of capacity 400 Amp, 3 phase 4 wire system duly colour coded tape/ paint duly mounted on insulators - 01 Set. (iii) Digital type volt meter of size 96 x 96 mm make - AE - 01 No. (iv) LED type indicating lamp for 3 phase (RYB) including control wiring - 01 Set. (b) OUTGOING :- (i) Aluminum bus bar of capacity 315 Amp, 3 phase 4 wire system duly colour coded tape/ paint duly mounted on insulators - 01 Set. (ii) MCCB TPN 25 KA 125 Amp, 415 Volts, 50 Hz DPX³ 125 Make- Legrand Cat Part No. 4200 46 or equivelant model of L&T / Havrells, ABB.- 01 No. (iii) MCB SPN 32 Amp, 240 volts, 10 KA, 50 Hz, - Make- Legrand Cat Part No. 4065 00 or equivelant model of L&T / Havrells, ABB.-08 Nos (iv) Internal copper wire/ strip connection completely from incoming bus bar to out going switch gear with suitable size copper cable complete- 01 Job

M&L for MCCB TPN 36 KA 200 Amp, 415 Volts, 50 Hz DPX³ 250 complete in existing LT pannel for outgoing fedder. Make- Legrand Cat Part No. 4202 38 or equivelant model of L&T / Havrells, ABB.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed. Make:- Legrand Cat Part No. 507611 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix Isolator SPN , 63 Amps, 240 volts, 50Hz, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 406502 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix Isolator SPN , 40 Amps, 240 volts, 50Hz, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 406501 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix MCB SP, 40 to 63 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 96 to 4085 98 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 87 to 4085 95 or equivalent model of make Siemens/ Schneider as approved by GE.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to using galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as speciified and directed. Make :- Havells, Bajaj, Khetain, Usha

S & Laying,jointing,commissioning and testing XLPE insulated steel armoured heavy duty elect power cable 1100 volt grade, stranded aluminium conductor cross sectional area 120 Sqmm 3.5 core laid in trenches or fixed to wall with saddles or layed in duct or passing through pipe for making electrical connection between LT panel/ feeder pillar box and DBs compele all as specified and as directed . Make :- Havells, Grandlay, Polycab, Finolex

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and as directed.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and as directed.

Supply and fixing GI Pipe 40mm light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed .

Captainkomalchaharconstructions

PD GUPTA AND COMPANY

C P Singh and Co