Provision of 06 (Six) No. portable metal Security Cabin at different locations within DPL.Job No. 917 /DPPS.

Amount

Providing and installing of metal portable security cabin measuring 6 feet x 4 feet x 8.6 feet (height) with base frame and corner post constructed with 50×50×2.5 mm SHS section / cross member and top rail: 50 x50x2.5 mm SHS section/framing: 25×25×2 mm SHS section using 1.2 mm thick corrugated Cold Rolled Close Annealed (CRCA) mild steel sheets on the exterior, treated with one coat of anti-rust primer and two coats of plastic paint. 18 mm thick waterproof solid weight cement board and a 1.0 mm floor mat, along with 4 mm Aluminium Composite Panel (ACP) lining insulated with 50 mm Glass Wool of a standard brand on the inside. The cabin will include 01(One) metal door measuring 6 feet by 3 feet, equipped with 01(One) stainless steel hatch bolt and 01(One) drop lock on the inside, 01(One) holding handle and with all necessary accessories, 03(three) No. Sliding windows, each measuring 800 mm by 800 mm, fully glazed and fitted with M.S. grills less than 22.5 kg/mtr. The cabin will be fully fitted with electrical wiring of Finolex/GLOSTER/ HAVELLS RIO make, along with electrical switches of Havells/ Oreva/ Anchor make. It will also include MCB/ELCB of Legrand/L&T/Schneider/ Havells make, 01(One) AC starter of Wipro/ Havells make, and lighting fixtures such as LED tubes, panel lights, and outside lights 01 (One) No. each of Philips / Havells make.01 (One) No. ceiling or wall-mounted fan of Bajaj / Anchor make, along with 01(One) work table with one drawer made with 17mm laminated MDF board. The rate does not also include transportation loading and unloading of the portable security cabin.

Transportation of 06 No. portable metal security cabin of size 6'x4'x8.5' up to a distance of 60 KM over pucca road.

Ordinary Cement concrete (mix 1: 1.5: 3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With l:6 cement mortar (c) 20 rum thick plaster.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and up to roof of ground floor/up to 4 m (i) Tor steel/Mild Steel II. Other than SAIL/ TATA/RINL

200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect. (a) In ground floor.

Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (i) 16 mm dia bolt (a) 300 mm long.

Engagement of hydra for shifting of M.S structural material as directed by EIC within the plant premises.

A. C. CONSTRUCTION (BID ID -6307740)

B. P. Engineering Works (BID ID -6266439)