PEB WAREHOUSE BUILDING WORKS TENDER FOR NREP

Amount

SUMMARY OF PRICES (SP-0)

Total amount As per SOR - SP1 : SCHEDULE OF RATES FOR CIVIL & PEB (Total of BoQ2)

Total amount As per SOR - SP2 : SCHEDULE OF RATES FOR ELECTRICAL (Total of BoQ3)

Total amount As per SOR - SP3 : SCHEDULE OF RATES FOR STORAGE RACKS (Total of BoQ4)

Description of Work / Item(s)

Amount

Design & Detail engineering , preparation of drawings, Supply &Construction of all civil works, Procurement & Fabrication & Installation of PEB ,Transportation to work site, storage & handling of materials, conducting tests , including guarantee, providing all temporary structures, all materials, consumables, labour, scaffolding, Construction equipment like crane etc. , construction machinery, tools & tackles, TPI inspection, compliance to quality and HSE requirement etc.to complete the work in all respects as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer-in-Charge.

SECTION-1 - (EARTHWORK)

Excavation in ordinary soil including clay black cotton soil, soft murrum, sand, etc. for all types of foundations/footings, plinth beams pilecaps or any other substructure, including shoring, strutting, dewatering backfilling with excavated earth and disposal of surplus earth up to a distance of 50 metre from the nearest edge of excavation area. The rate shall include all tools, tackles, supervision, transport and incidental expense, overhead & profit, etc. as per section 1 of Tech. Specification, up to and including a depth of 2M below existing level. Quoted rate shall include disposal/transporting and stacking of the surplus earth with in Refinery Complex as instructed by EIC/NRL

All activities & scope same as in item 1.1 but for excavation below 2M and upto 4 M below existing ground level.

Backfilling in foundation pits with earth borrowed from outside by the contractor including supply of material, all transport, fill in layers, including compaction etc. as per technical spec. Section No.1.

Same as 1.15 but for murrum filling

Excavation in soil containing small pebbles, rubble, boulders, removable without breaking/blasting, etc. which cam be loosened manualy or mechanically operating tackles such as pick shovels, front loader (as defined in IS:1200) etc. for all types of foundations/footings, plinth beams pilecaps or any other substructure, including shoring, strutting, dewatering backfilling with excavated earth and disposal of surplus earth up to a distance of 50 metre from the nearest edge of excavation area. The rate shall include all tools, tackles, supervision, transport and incidental expense, overhead & profit, etc. as per section 1 of Tech. Specification, up to and including a depth of 2M below existing level

Carting away, stacking and spreading excavated soil out side the refinery complex / refinery gate for a lead upto 2 KM from the main gate.

Carting away, stacking and spreading bored/excavated soil out side the refinery complex / refinery gate for a lead of above 2 KM and upto 6 KM from the main gate.

SECTION - 2 - CONCRETING AND FORM WORK (Refer Annexure I in addition to the technical specifications)

Supplying, mixing, placing in position, plain cement concrete of M1O grades as per IS:456 under foundations, floors, plinth beams etc. including compaction by vibration, curing, using 20mm /40 mm down aggregate all per sec 2 of tech-spec. but excluding form work and reinforcement.The rate shall include all tools,tackles,labours,consumables etc.

All activities and scope same as 2.1 but for plain cement concrete grade M 15.

Supplying, mixing, placing in position RCC of grade M30 using 20 mm down coarse aggregate as per IS:456 in foundations,beams, plinth beams, columns, portals, slabs, walls, curved walls, retaining walls, pedestals, including compaction, vibration, curing and finishing all as per Section 2 but excluding form work and reinforcement. All from foundation level to top of plinth level.The rate shall include all tools,tackles,labours,consumables etc.

All activities and scope same as 2.4 but from above plinth level and upto +6m level.

FORMWORK

Supplying and fixing wrought timber form work for concrete elements like foundations, footing, pedestals, pile caps, plinth beams and beams below at various levels and at required slopes as per drawing and specifications including materials, making, fixing, supporting maintaining and after concreting stripping at appropriate time, all as per secstion 2 of tech-spec.The rate shall include all tools,tackles,labours,consumables etc.

All activities and scope same as 2.20 but from above plinth and upto + 6 m.

Providing and grouting anchor bolts,pockets with FOSROC, CONBEX, GP2 OR equivalent.including formwork,finishing,curing at all elevation as per SEC-2 of Tech-spec.The rate shall include all tools,tackles,labours,consumables etc.

SECTION-3

Supplying and constructing masonary of AAC block (of density 651 to 750 Kg/Cum and minimum compressive strength 5 N/mm2) in cement mortar 1:6 in foundations, substructures, walls, pillars chambers, etc. including scaffolding, curing, raking of joints etc. all as per Section-3 of technical specifications.The rate shall include all tools,tackles,labours,consumables etc.

All activities same as 3.1 but in superstructures, walls, pillars, chambers, etc. in 1:5 C.M. including scaffolding, curing raking of joints etc. all as per Section-3 of technical specifications and at all heights.

All activities same as 3.2 but in 115mm walls in 1:4 CM including 150mm thick RCC stiffener at every 900mm laid in concrete M15 with 4nos-8mm tor bars & 8mm tor ties at 300mm centre to centre including form work, cutting, bending & binding of reinforcement, all complete.

Supplying and applying 12mm thick plaster in cement mortar 1:6 over interior surfaces of masonary and concrete including scaffolding, curing, finishing with lime Neeru at all heights as per Section-3 of technical specification. The rate shall include all tools,tackles,labours,consumables etc.

Supply and applying upto 20mm thick sandface plaster in cement mortar 1:6 over exterior surfaces of masonary and concrete including scaffolding, curing & finishing at all heights as per Sect-3 of tech. specs. The rate shall include all tools,tackles,labours,consumables etc.

SECTION-4 (REINFORCEMENT WORKS)

Supply and fixing, reinforcement steel in RCC works as per drawing and specifications including preparation and obtaining approval of bar bending schedule, straightening, decoiling, removing milscales and rust, cutting, bending to required shape, binding in position, supply of approved type of binding wire etc. all as per section FOUR of technical specifications and for Mild Steel reinforcement bars Conforming to IS;432.The rate shall include all tools,tackles,labours,consumables etc.

All activities same as 4.1 but for Fe-500,HYSD TMT BARS conforming to IS:1786

SECTION-5 (FLOORING, SKIRTING AND DADO:)

Supplying and laying RCC flooring and grade slabs to proper grades and slopes as shown in the drawings, in panels of approved sizes, providing construction and expansion joints as per drawing including formwork, dressing and compaction of sub- grade, finishing, as specified, curing etc. BUT EXCLUDING REINFORCEMENT all complete as per section FIVE of technical specification for floors in concrete of grade M-30 with local thickeners as detailed in drawing.The rate shall include all tools,tackles,labours,consumables etc.

Supplying and laying flooring, skirting and dados with approved tiles and in specified bedding and jointing mortor including machine polishing and finishing as specified in section FIVE of technical specifications with Ceramic tiles of spartex make or equivalent of approved size and colour with ground mass of white cement.The rate shall include all tools,tackles,labours,consumables etc.

Supply and laying Tremix Vaccum dewatered concrete flooring M30 (150 mm thick), providing & sprinkling synthetic, nonmetalic, high-abrasion resistant floor-hardner POLYABRES of M/s Sunanda Speciality Coatings Pvt. Limited or equivalent, while the base-conceret is about to set and the bleeding water appears over the surface, at 3 to 5 kg/m2 ( excluding concrete) and finished with trowel as per requirement. Allow to set for 24 hours and proceed with regular concrete curing specification. Light foot traffic may be allowed after 24 hours etc all complete as per satisfaction of Engineer in Charge.The rate shall include all tools,tackles,labours,consumables etc

SECTION-6 (DOORS, WINDOWS AND VENTILATORS:) E-ALUMINIUM DOORS

Supplying, fabricating and fixing aluminium doors with standard extruded sections having min 3mm wall thickness, swinging shutters with floor springs and pivots or Aluminium hinges, opening both ways and with fully glazed panels using 6mm thick ordinary sheet glass with anodised aluminium fittings.The rate shall include all tools,tackles,labours,consumables etc

All activities and scope same as 6.21 but for openable type fully panelled with 12 mm thick commercial plywood primer coated and sandwitched between 16 g aluminium sheets.

All activities and scope same as 6.21, 6.22 but for partly glazed 4mm thick plain glass and partly panelled door.

F - AL. WINDOWS & PARTITIONS

Supplying, fabricating and fixing aluminium window frames and shutters with standard extruded sections having 3mm (min) wall thickness, openable type with sliding shutters glazed with 4 mm thk glass sheet all complete with anodised aluminium fittings.The rate shall include all tools,tackles,labours,consumables etc

G - VENTILATORS & PARTITIONS

Supplying, making and fixing ventilators with aluminium frame size 120 mm x 60 mm and top hung shutters of 38 mm thick with 4 mm plain glass including hold fasts, oxidised brass or aluminium fittings with one coat of wood primer all complete..The rate shall include all tools,tackles,labours,consumables etc

Supplying, making and fixing Standard gear Operated type rolling shutter,18g steel sheet as per technical specification.The rate shall include all tools,tackles,labours,consumables etc

SECTION-7 - (STRUCTURAL STEEL WORK) Design, supply & installation of pre-engineered structural shed as per size and details given in TKIS drawing No. TK-1G08A-AR-BDD-0001-A1. and technical specification "Item includes the following: (i)The entire design and drawings are in bidder’s scope. (ii)All supplies including structural steel / formed sections / built-upsections / plates / hardwares are in bidder’s scope. (iii)Fabrication, transportation, blast cleaning and epoxy painting.

Supply, fabricating and erecting structural steel at all levels as per drawing including blast cleaning and painting as per technical specifications ,tools, tackles,cutting, welding, consumables, assembly, bolts, permanent bolts, preparation of fabrication drawings (if felt necessary by the Contractor -ref. Clause 7.2 of Technical specifications) for all types of structures in buildings, pipe racks, platforms and towers.The rate shall include all tools,tackles,labours,consumables etc

All activities and scope same as 7.1B but for Chequered Plates.

Supplying, fabrication, alignment, fixing, including jigs and fixtures foundation bolts as per drawing upto 20 mm dia.The rate shall include all tools,tackles,labours,consumables etc

All activities same as 7.7 but above 20mm and up to 40 mm.

All activities and scope same as 7.1 but for INSERT PLATES including fabricating, welding of lugs and installing at all heights.

SECTION-8 (ROOFING AND CLADDING)

Supply and fixing of PVC downtake pipes including jointing and fixing with 50x6 mm clamps and bolts at every joint, for 100mm dia.

All activities and scope same as 8.15 but for 150mm dia.

All activities and scope same as 8.15 but for 200mm dia.

Providing and fixing polycarbonate profiled translucent sheets of min. thickness 2mm thk. for roof and side cladding including all fixtures.

COLOUR COATED G.I. SHEETS AND ACCESSORIES

ACCESSORIES FOR Pre-coated Galvalume Sheets

Ridge pieces - Profile

Eaves Gutter - Profile

Corner Flashing - Profile

Profile Gable Flashings

Deep Trims

Providing and fixing Galvalume Z type fixed louvers with bird screen including necessary framing and fixing arrangements.

SECTION-9 (PAINTING) - ON CONCRETE & PLASTERED SURFACES

Supplying and applying 3 coats of white or colour lime wash including scraping, crack filling with putty, scaffolding, all tools and tackles, brushes etc. complete.The rate shall include all tools,tackles,labours,consumables etc

All scopes and activities same as 9.1 but with primer and 3 coats of plastic emulsion paint.

All scopes and activities same as 9.1 but with cement based primer and 3 coats of cement based paint for EXTERNAL SURFACES.

SECTION-11 (SANITARY AND PLUMBING)

Supply, install and test white glazed sanitary wares of approved make and type including filling of joints wherever required with cement or any other approved sealent complete in all respects as per section ELEVEN of technical specifications and for Western style hung type commodes as per IS-2556 including PVC seat covers and top including C.P. brass 25 mm dia. flush cock of Prince or equivalent, painting of all exposed metallic surfaces with 2 coats of approved shade and quality Synthetic enamel paint over a primer coat of red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing, all complete.The rate shall include all tools,tackles,labours,consumables etc

All scope and activities same as 11.1 but for Indian style commode as per IS-2556.

Supply, install and test Large flat back urinal of size 610 mm x 400 mm x 380 mm conforming to IS-2556 including providing C.P. brass 15 mm stop cock of Prince or approved equivalent, painting all exposed surfaces with 2 coats of approved shade of Synthetic enamel paint over a primer coat of red oxide zinc chromate, making inlet and outlet connections, fixing C.P. brass screws finishing, all complete.The rate shall include all tools,tackles,labours,consumables etc

Supply, install and test Wash basin of size 510mm x 400mm including mounting brackets all as per IS-2556 Part IV.The rate shall include all tools,tackles,labours,consumables etc

Supply and install Toilet paper holder fitted in wall.The rate shall include all tools,tackles,labours,consumables etc

Supply and install Soap dish in wall. The rate shall include all tools,tackles,labours,consumables etc

Supply and fix 25 mm thick marble stone partition of size 1200 mm x 600 mm between two urinals including C.I. brackets at bottom, cement jointing etc. complete in all respects.he rate shall include all tools,tackles,labours,consumables etc

Supply and install waste water piping and fittings for drainage of waste water including laying, jointing, testing etc. complete as per section ELEVEN of technical specifications for 100 mm dia. round stone ware glazed pipes of spigot and socket type.The rate shall include all tools,tackles,labours,consumables etc

Supply and install C.P. bottle trap under urinals and wash basin.The rate shall include all tools,tackles,labours,consumables etc

Supply and install C.I. floor trap with C.P. brass gratings.The rate shall include all tools,tackles,labours,consumables etc

Supply and install C.I. gulley including providing brick chamber and C.I. cover of size 300 mm x 230 mm.The rate shall include all tools,tackles,labours,consumables etc

Supply and construct manhole chamber of 230 mm thick brick wall in C.M. 1:4, P.C.C. M-10 grade in base slab, plastering on either side with 20 mm thick C.M. 1:4, benching for pipe to channelise the flow, C.I frame and 50 Kg. Rating cover including excavation, back- filling etc, complete in all respects as per relevent technical specifications as applicable for various works for 600 mm x 600mm and upto 2000mm deep manhole.The rate shall include all tools,tackles,labours,consumables etc

All activities and scope same as 11.18 but for 900 mm x 1200 mm and upto 3000mm deep manhole.

Septic tank with covers, , vent pipes and other accessories as per specifications, including excavation, backfilling, pipe connections, joint sealing etc. complete in all respects, for 50 users.The rate shall include all tools,tackles,labours,consumables etc

Supplying and constructing soak pit next to outlet of septic tank as shown in the drawing, including excavation, backfilling, filling the pit with brick bats, complete in all respects.The rate shall include all tools,tackles,labours,consumables etc

Supplying and laying C.I soil pipes 100 mm dia under floors, inside buildings, jointing with cement, testing for no leakage, including all fittings, cleaning and/or flushing out, traps etc. complete in all respects.The rate shall include all tools,tackles,labours,consumables etc

Supply, installing, jointing,testing, pipes, pipe fittings, valves, flexible connections, as specified for water supply inside and outside buildings, all as per drawing and section ELEVEN of technical specifications for 12mm bore G.I. piping of Class 'C' including all necessary fittings.The rate shall include all tools,tackles,labours,consumables etc

All activities and scope same as 11.24 but for 20 mm bore G.I piping of class 'C' including all necessary filltings.

All activities and scope same as 11.24 but for 25 mm bore G.I piping of class 'C' including all necessary fittings.

All activities and scope same as 11.24 but for 32 mm bore G.I piping of class 'C' including all necessary fittings.

Supply, install and test valves and taps of C.P. brass gun metal as specified, for 12 mm dia. C.P. pillar tap on wash basins.The rate shall include all tools,tackles,labours,consumables etc

All activities and scope same as 11.24 but for 12 mm dia C.P. bib cocks.

Supply, install and test 12 mm dia. PVC flexible connection 450 mm long.The rate shall include all tools,tackles,labours,consumables etc

Supply and install 600 mm x 450 mm size mirrors of approved make and as specified.The rate shall include all tools,tackles,labours,consumables etc

Supply and install 16 mm dia. C.P. brass towel rods.The rate shall include all tools,tackles,labours,consumables etc

Supply, install and test C.P. Soap dispenser over wash basins, sinks etc. as specified.The rate shall include all tools,tackles,labours,consumables etc

Supply, install and test PVC tanks of sintex make or equivalent upto 2000 litres capacity including all fittings.The rate shall include all tools,tackles,labours,consumables etc

SECTION - 12 (ROADS, DRAINS, PITS, CHAMBERS & CULVERTS) - CULVERTS:

Providing and laying RCC hume pipe Class NP3 including jointing and testing for 150 mm dia.The rate shall include all tools,tackles,labours,consumables etc

All activities same as 12.81 but for 450 mm dia.

All activities same as 12.81 but for 600 mm dia.

All activities same as 12.81 but for 750 mm dia.

All activities same as 12.81 but for 900 mm dia.

SECTION-15 (COMPOUND WALL, FENCING AND GATE) Supply of all materials, labour, supervision, transport, tools, tackles,consumable, wastage, PPE''s,crane/hydra etc. and construct compound walls, gates, pillars, posts,barbed wire fence,chain link fence etc, along plant or site boundary as shown in the drawing and as per relevant technical specifications covered under different sections and section FIFTEEN of technical specifications for :

Excavation including de-watering, backfilling for wall foundations, post and or pillar foundations, gate post foundation etc. for a depth up to 2meters below ground level: in ordinary soil

450 wide Random Rubble Masonry with flush pointing

Plain Cement Concrete of grade M-15 below foundations for wall, post, pillar etc. as shown in the drawing including necessary shuttering and as per technical specifications covered under relevant clauses.

Reinforced Cement Concrete of M-15 grade in compound walls, posts, pillars all cast in situ as per drawing and relevant technical specifications covered under various sections, including shuttering, finishing, curing etc. but excluding reinforcement.

Supply,Fabricating and erecting M.S. angle iron posts including one coat of red oxide primer.

Supply and fixing of G.I barbed wire fencing with spikes at 75 mm c/c.with hook-bolts,washers,nuts etc.as per specification,drawings and instruction and to the full satisfaction of Owner/Engineer in charge.

Supplying and fixing G.I.Chain Link with 10 gauge wires meshed to form 50mmx50mm openings stretced between posts and fixed with 12 mm dia.G.I.L-bolts abd vertical G.I.Bars of 6 mm dia.over posts,supplying and streteching 3 mm tension wires horizontally at top, center and bottom of the chain link as per the technical specifications.

Supplying and installing gates for fencing or compound wall, generally consisting of 65 NB M.S. medium tube as peripheral main member, 50 NB M.S. medium tubes as secondary members fixed with hard drawn steel fabric conforming to serial no.3 of IS-1556, including welding, hinges, locking arrangement, insert plates all complete.

Supplying and installing gates for fencing or compound wall, generally consisting of 50x50x6mm M.S.angle frame, 50x50x6mm M.S. Toe stiffners,50x50x8mm welded mesh fixed to the masonary/RCC.by M.S.hinge arrangement (consisting of 65x65x6mm M.S.angle,bolt,washers etc) with M.S Holdfast grouted with M-15 concrete block.The gate shall have M.S.pivot arrangement(ensuring smooth operation of the gate),one heavy duty 450mm long M.S.aldrop,heavy duty M.S tower bolts etc.in totality.The entire Gate/fencing with fittings/fixtures/accessories shall be finished with two or more coats of synthetic enamel paint of approved make and shade over a coat of approved red oxide zinc chromate primer.All embeded metallic parts shall be provided with primer etc all complete.to the full satisfcation and to the instruction of Owner/Engineer in charge.

SECTION - 19 - (CAVITY FLOOR AND FALSE CEILING)

Providing and fixing in position Mineral fibre board false ceiling of Jolly insulex or equivalent in horizontal, inclined or vertical surfaces, comprising of 600 x 600 mm grid aluminium framing with 40 x 25 mm aluminium tees with all necessary G.I. suspenders, 3 mm dia. clips, hooks, anchor fastners, nuts and other accessories including providing and finishing the cutouts for A.C. diffusers light fixtures etc. with appropriate additional framing where required to approved pattern approved pattern etc. complete in all respects and as directed. Ceiling tiles to have one of fire retarding paint on concealed side. All the work shall be as per drawing and and as per Section 19 of technical specs.

SECTION - 20 - (ANTITERMITE PRECONSTRUCTION TREATMENT)

Supply, applying and spraying of antitermite chemicals over termite mounts, at column pits, walls, trenches and basement excavations, RCC framed structures and RCC walls, on top surface of plinth filling, junction of walls and floors, soil under apron and plinth protection, including providing approved chemicals, tools, plants, instruments, consumables and labour as per Section 20.0 of Technical Specifications. The quantity shall be measured in terms of plinth area of building at Ground Floor.The rate shall include all tools,tackles,labours,consumables etc

Description of Work / Item(s)

Amount

Supply and installation of electrical switchboard. Scope of work includes handling, shifting from site-store / yard to the installation location, unpacking, erection, alignment, assembling and installation of various shipping sections / assemblies, assembling and installation of components / devices supplied separately - as recommended by MANUFACTURER / applicable construction documents, interpanel wiring, stenciling with paint on equipment enclosures as required and other associated work so as to ensure the completeness of installation work. Testing, precommissioning and commissioning activities are included in the scope. Minor civil work such as chipping, grouting for fixing of equipment and replastering the same as per the site requirement (including the supply of consumable material for the same) is included in the scope. Supply and installation of all fixing hardware such as nut, bolts washers, anchor fasteners etc. and other consumables as per the site requirement is included in the scope.

APDB (In line with Electrical Scope of Work for Warehouse Doc. Id. TK-1G08A-EL-SOW-0001 and Attachment-1) Voltage : 415V Construction : Double/ Single front, fixed type, Floor Mounted, Incoming supply through cable. No. of Double front panels (Approx.) :Vendor to furnish Wt. per panel : Vendor to furnish Overall dimension :Vendor to furnish Location :Electrical room

LED LIGHT FIXTURES

40W LED Industrial Batten light fixture suspended from ceiling

45W LED (600x600mm) Decorative Recess mounted lighting fixture

18W LED Decorative Down lighting fixture

36W LED Street lighting fixture mounted on building column

200W LED Flood lighting fixture mounted on building column

20W LED Emergency lighting fixture with Battery back-up

200W LED Flood lighting fixture with 5m lighting pole

JUNCTION BOXES FOR LIGHT FIXTURE

Industrial Lighting Junction Box 4 way for loop-in loop-out purpose with terminals suitable for 2.5/4 sq. mm and blind plugs as applicable

PULL BOXES

4 Way Pull Boxes lighting wiring

DBs FOR LIGHTING AND SMALL POWER Industrial Sub-lighting distribution board and power distribution boards in line with Electrical Scope of Work for Warehouse Doc. Id. TK-1G08A-EL-SOW-0001 and Attachment-1

15-Way SLDB

12-Way PDB

SMALL POWER 1 PH CONVENIENCE SOCKETS

20A, 240V, single phase, 3 pin socket outlet with 1 No. 20 A, 10 kA, SPMCB, in sheet steel enclosure.

20A, 240V, single phase, 3 pin socket outlet with 1 No. 4HP motor starter, in sheet steel enclosure.

DECORATIVE TYPE SWITCH SOCKET OUTLET BOXES

Decorative type switch socket box with 1 no. 5/15A switch socket unit and 1 no. modular piano type switch

Decorative type switch socket box with 1 no. 5/15A switch socket unit and 2 no. modular piano type switch

Decorative type switch socket box with 1 no. 5/15A switch socket unit and 3 no. modular piano type switch

Decorative type switch socket box with 2 no. 5/15A switch socket unit and 2 no. modular piano type switch

Decorative type switch socket box with 1 no. 5/15A switch socket unit, 1 no. modular piano type switch and 1 no. piano type 2way switch

Decorative type switch socket box with 1 no. 20A switch socket unit, and 1 no. 4HP motor starter

63A THREE PHASE POWER SOCKETS (WELDING SOCKETS)

Industrial type, 415V, 63A, TPN & E socket outlet, with die cast Al LM6 enclosure with cable loop-in loop-out facility

Pedestal Fan (400mm) with electronic speed regulator

Exhaust Fan (300mm)

Exhaust Fan (150mm)

SUPPLY AND INSTALLATION OF CABLES, WIRES AND CABLE ACCESSORIES Supply, handling, shifting of wire coils/ cable drums from site-store / yard to the installation location, unpacking, laying of cables / wires in cable trays (either located above ground or inside RCC cable trenches) / directly buried underground / in sand filled cable trenches (trench constructed by others) / through above ground conduits (PVC / GI) clamped on wall or structure or through concealed floor or wall conduits as recommended by MANUFACTURER / applicable construction documents and other associated work so as to ensure the completeness of installation work. Testing, precommissioning and commissioning activities are included in the scope. Supply and installation of spacer bars and saddles, dressing of cables using Stainless Steel cable ties, cable tags and ferrules (including all fixing hardware) as per the site requirement are included in the scope. Supply of water / fireproof compound (of reputed make) and sealing of openings for cable entries by applying the same (whether spare openings or openings with cables passing through) is included in the scope. Minor civil work such as chipping / drilling of through-holes / cutouts in floor / walls, replastering and making area good after work done, providing sleeves during the cable laying as per the site requirement and replastering the same (including the supply of consumable material for the same) is included in the scope.

1100V voltage grade, Multistranded Cu conductor, PVC insulated, flexible wires

2.5 mm2 Wire (concealed wiring for lighting)

4 mm2 Wire (concealed wiring for AC units)

650 / 1100 V (Uo / U) voltage grade, Al / Cu conductor (stranded), XLPE insulated, armoured power / control / lighting cables

3Cx2.5 mm2 2XWY (for Lighting other misc. power)

3Cx4 mm2 2XWY (for sockets, AC units and other misc. power)

4Cx4 2XWY

4Cx16 2XFY (for SLDB, Lighting mast and other misc. power)

3.5Cx50 A2XFY (for PDB, 63A socket outlets and other misc. power)

3.5Cx300 A2XFY (for incoming power)

CABLE GLANDS AND LUGS: Supply and installation of double compression Nickel plated brass type Industrial cable glands and termination of cables of various sizes & types as described below. Glanding & termination charges shall include drilling and threading of gland plates, supply of all necessary hardware including suitable pin or ring type tinned copper lugs, ferrules, heat shrinking sleeves for cable cores of various sizes for LV cables, all labour and associated work. Lugs for conductors greater than 35sq. mm shall be tubular type, long barrel type heavy duty for bolted connection. Reducers for cable termination wherever required shall be part of the scope.

3Cx2.5 mm2 2XWY (for Lighting other misc. power)

3Cx4 mm2 2XWY (for sockets, AC units and other misc. power)

4Cx4 2XWY

4Cx16 2XFY (for SLDB, Lighting mast and other misc. power)

3.5Cx50 A2XFY (for PDB, 63A socket outlets and other misc. power)

3.5Cx300 A2XFY (for incoming power)

SUPPLY AND INSTALLATION OF G.I CABLE TRAYS: Supply, handling, shifting from site-store / yard to the installation location, unpacking, erection, alignment, assembly and installation of prefabricated galvanized steel ladder type / perforated cable trays (above ground or inside concrete trenches) with all associated accessories such as bends, reducers, T-joints, fixing clamps, earthing continuity conductors etc. - as recommended by MANUFACTURER / applicable construction documents, fixing of cable trays / associated accessories to steel supports, stenciling with paint as required and other associated work so as to ensure the completeness of installation work Rates for straight runs shall includes fabrication of bends, T-joints, reducers etc. from straight runs, wherever required, and fixing of tray to supports. Supply and installation of all supports, fixing hardware such as nut, bolts washers, anchor fasteners etc. and other consumables as per Standard installation drawings and site requirement is included in the scope.

a) 300 mm wide ladder type straight run

b) 100 mm wide perforated straight run

b) 50 mm wide perforated straight run

SUPPLY AND INSTALLATION OF CONDUITS: Supply and Installation of conduits and corrugated, flexible conduits with edge protection grommet at either ends for cable protection on walls or structures or through floors or walls including chipping or breaking of floor / walls and making good the same. Charges shall include cutting, bending of pipes, supply & fixing of GI. clamps, reducers / adaptors for the conduits, supply of & sealing with fireproof/waterproof compound and other associated work. Supply and installation of all supports, fixing hardware such as nut, bolts washers, anchor fasteners etc. and other consumables as per Standard installation drawings and site requirement is included in the scope.

Rigid GI Conduits/pipe

25 mm nominal dia.

GI pipe B class 100mm

PVC Conduits

19 mm nominal dia.

25 mm nominal dia.

SUPPLY AND INSTALLATION OF MATERIAL FOR EARTHING: Supply, handling, shifting from site-store / yard to the installation location, unpacking, assembling and installation of earthing and lightning protection systems and accessories underground / wall / concrete / steel structure / cable trays - as per applicable construction documents and other associated work so as to ensure the completeness of installation work Scope includes excavation of soil up to the required depth, installation of earth conductor, back filling and compacting of soil and disposing the excess soil, termination as required. For GI earthing conductors, laying of conductor including bending, drilling, welding / jointing as required is included in the scope. Supply and application of coal tar bituminous paint or cold galvanising paint on welded joints is included in the scope. Testing of earth electrode, filling of the pit with the appropriate material as required is included in scope. Required Lugs and other consumables are included in scope. Civil work including construction of concrete chamber with cover for the earth pit as per the Standard Installation drawings, site requirement is included in the scope. Supply and installation of all supports, fixing hardware such as nut, bolts washers, anchor fasteners etc. and other consumables as per Standard installation drawings and site requirement is included in the scope.

75 X 8 G.I. strip main under ground conductor

Earth Pit with GI Pipe Electrode in treated pit

Earth Pit with GI Rod Electrode in non treated pit

Earth Bus

25 x 3 GI Strip for lightning on roof / down conductor

Test link

10 sq. mm GI wire rope

SUPPLY AND INSTALLATION OF STRUCTURAL STEEL

Supply, Fabrication, erection ,cleaning, painting and Installation of supporting steel for trays, light fittings, JB, SLDB, Socket and miscellaneous works etc. All consumables such as welding electrodes is in the scope of the vendor.

SUPPLY AND INSTALLATION OF LIGHTING MAST

Supply and installation of 30m high mast with 200W LED Flood lighting fixtures including spares (In line with Electrical Scope of Work for Warehouse Doc. Id. TK-1G08A-EL-SOW-0001 and Attachment-3). Scope includes handling, shifting from site-store / yard to the installation location, unpacking, assembling and installation Mast and its accessories as per manufacturer's guidelines, applicable construction documents, testing, commissioning and other associated work so as to ensure the completeness of installation work. Supply and installation of all fixing hardware such as nut, bolts washers, anchor fasteners etc. and other consumables as per the site requirement is included in the scope. Scope includes design, supply and erection of complete foundation for the mast as per requirements of manufacturer and site conditions

Supply & Installation of Split AC and exhaust Fans

Store Incharge Room : 2 TON Split AC

Store Assistants Room : 2 TON Split AC

Record Room : 2 TON Split AC

Computer Room : 2 TON Split AC

Air Conditioned Storage Room : 2 TON Split AC

Electrical Room : 150 CFM exhaust fan

Toilet : 150 CFM exhaust fan

Warehouse : 600 MM Turbo Ventilators

Warehouse : 2000 CFM exhaust fan

Description of Work / Item(s)

Amount

Design & Detail engineering , preparation of drawings, Supply & Installation of Ware House Racks including Transportation to work site, storage & handling of materials, including guarantee, providing all materials, consumables, labour, scaffolding, equipment, machinery, tools, tackles, TPI inspection, compliance to quality and HSE requirement etc.to complete the work in all respects as per drawings, specifications, manufacturer's standards and instructions of Engineer-in-Charge.

Supply and installation of ware house rack in line with Specification for Ware House Rack System Doc. ID TK-1G08A-CM-SPE-0001 included in the Part II of the bid dcoument . .

Tuaman Engineering Limited

Pramila Projects Pvt. Ltd.

BDS PROJECTS

Devi Engineering and Constructions Private Limited

Shree Shyam Enterprise

Lloyd Insulations (India) Ltd

REPONO WAREHOUSING PRIVATE LIMITED

Tuaman Engineering Limited

BDS PROJECTS

Pramila Projects Pvt. Ltd.

Shree Shyam Enterprise

Devi Engineering and Constructions Private Limited

Lloyd Insulations (India) Ltd

REPONO WAREHOUSING PRIVATE LIMITED

Lloyd Insulations (India) Ltd

Mechfab engineering industries pvt ltd

Pramila Projects Pvt. Ltd.

BDS PROJECTS

Devi Engineering and Constructions Private Limited

REPONO WAREHOUSING PRIVATE LIMITED

Shree Shyam Enterprise

Devi Engineering and Constructions Private Limited

Pramila Projects Pvt. Ltd.

BDS PROJECTS

Lloyd Insulations (India) Ltd

Tuaman Engineering Limited

REPONO WAREHOUSING PRIVATE LIMITED

Shree Shyam Enterprise