PROVN OF VENTILATED HAY STORE AT ETT AND PROVN OF FENCE IN THREE BLOCKS AT JCO MD ACCN AT NDA KHADAKWASLA

Amount

M & L for surface dressing n exc 15cm deep of soft / loose soil, including removing of shrub,grass vegitation etc complete all as specified and directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard /dense soil

Ditto all as per item No. 2 above but in soft disintegrated rock

M&L for cement concrete type D2 (1:4:8) (Using 40mm graded aggregate) in foundations, filling and mass concrete

M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) (Using 20 mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete

M&L for reinforced cement concrete (nominal mix) Type B1 (1:2:4) using 20 mm graded aggregates in Columns, pillars, piers, posts and struts

M&L for RCC (Nominl mix) type A-1, (1:2:4) (20 mm graded stone agg) as in beams, lintel etc complete all as specified.

M&L for RCC (Nominl mix) type A-1, (1:2:4) (20 mm graded stone agg) as in Chajjas and the like etc completed all as directed.

M&L for RCC (Nominl mix) type A-1, (1:2:4) (20 mm graded stone agg) as in slab/RCC band/coping over walls, canopies, deck slabs and in shelves and the like etc completed all as directed.

M&L for use & wastage of form work to edge of concrete flats of floor and roof, cills etc and similar items n.exc 20cm wide for fair finished surface complete all as specified.

M&L for formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter.

M&L for Formwork to rough finished surfaces of concrete sides of columns, posts, struts, piers, pillars and stanchions as specified and directed.

M&L for Formwork to flat fair finished surfaces of concrete sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

Ditto all as per item No. 14 above but 6 to 8 mm dia

Ditto all as per item No. 14 above but 5 mm dia and over upto and incl 12mm dia as in stirrups

M&L for PCC precast solid block masonary exc 10cm in width in PCC type C1,(1:3:6) ( Using 20 mm stone aggregate) and set in cm (1:6) complete all as specified.

M&L for rendering 10mm thick in CM (1:6) on fair faces of block wall or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 5mm thick in CM (1:4) with using water proofing compound at 3% by weight of cement over 10mm thick plaster in CM (1:4) on extenal surfaces of block wall or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and as directed

Supply only water proofing compound

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilings.

M&L for preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant primer complete all as directed

M&L for spreading and levelling of earth/soft rock in layers n.exc 25 cm as in floors including well removing and watering as required with approved earth/soft rock.

M&L for broken stone hard core of gauge n. exc 63mm broken stone deposite spread and leveled in layers not exc 15cm thik watered and well rammed to a true surface

M&L for providing 75 mm thick Cement Concrete type D-2, (1:4:8) (Using 40 mm graded stone agg) as in sub base to floors.

M&L for providing & laying 100 mm thick Cement Concrete with Gde M-20 tremix concrete (design mix) with RMC and tremix machine and plate vibrator by using 20mm graded coarse aggregates as in floor surface/ hardstanding/roads/slabs over drain; finished surface of concrete surface with smooth finish as required without using extra cement etc complete all as specified and directed by Engineer-In-Charge

M&L for forming Contraction (dummy) joint 60mm deep x 5mm wide filled with sealing compound grade 'A' as in floor surface complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in any type of soils complete all as specified and as directed.

Removal of excavated soil/rock to a distance n exc 250 m and deposited where directed at level n.exc 1.5m above the starting point complete all as specified and directed.

S&F MS framed work such as grills, gratings,gates etc. with ends of bars shouldered and/ or rivetted or forged ionto spikes; framed guard bars; barred into doors ; ladders framed balustrades walk ways railings framework of watertanks & similar work portion framed & hung as gates including pintle hinges, stops, hand made sliding bolts etc. con-forming to Fe-290 Gde -E-165.

S&F for Wire netting of stainless steel wire 1.4mm dia of 25mm mesh size fixed with welding to grills or tinned tacks of stainless steel wire staples complete all as specified and directed by Engineer-in-charge

S&F bands, hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; plate washers and similar small articles conforming to Fe-290 Gde-E-165 including necessary welding to grill.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer.

M&L for 75 mm thick PCC (1:3:6) type C-1 as in plith protection & finishing the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for MS Plates, FE 410W,Grade E-250 (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted,bolted or welded attachment

M&L for MS Roof trusses (framed trussed purlins ,crane gantries and heavy bracket framing(beam,tee,angle ,channel or flat sections) incl distance pieces ,cleats etc Fe 410w,grade E 250

M&L for MS hollow box sections as in main and cross beams ,purlins where connected to common rafters ,fixed with angle cleats or other connecting plates ,Fe 410 W ,GRADE E- 250

M&L for pre painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering in sloping,circular or any shape/cladding to wall fixed with self tapping screws as specified and roof covering fixed with J hook or L hook or cranked bolts completely all as specified and as directed by Engineer In Charge.

M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thk of an colour having tensile strength of 550 Mpa as in in roof covering/cladding to wall,ridges with self tapping screws as specified and roof covering fixed with J hook or L hook or cranked bolts completely all as specified and as directed by Engineer In Charge.

M&L for MS work as in wind ties for roof complete all as directed.

M&L for mild steel screw bolts (machine made ) dia of neck exc11mm but n.exc15mm with hexagonal or square head at one end and screwed the other ,or screwed both ends ,each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n.exc10cm long

M&L for Mild steel bolts ,purpose made with hexagonal or square head one end and screwed the other or screwed both ends ,dia of neck exc 12mm but n.exc 20mm ,each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long

Excavation in trenches n.exc 1.50m wide and not exc 1.50m deep and getting out in any soft soil.

M&L for cement concrete (1:4:8) type D2 (40 mm graded aggregate) as in mass concrete and foundation etc

M&L for precast cement concrete (1:3:6) type C1 (Using 20 mm graded stone aggregatre) as in solid block masonary exceeding 10 cm width and setting in cement mortar (1:6) complete all as specified

M&L for rendering 15 mm thick on fair faces of block masonary or concrete surfaces in CM (1:4).

M&L for mild steel posts,struts,rafter and purlins for chain link fencing including cutting to shape as directed and drilling holes,notching for wire etc flat iron fillets etc complete all as specified and directed.

M&L for cement concrete in foundation, filling and mass concrete type B2 (1:2:4) (40mm graded aggregate) including necessary formwork for fixing MS Post etc completed

M&L for mild steel Flats confirming to Fe-410(O) or Fe-310(O)as in fillets for securing mesh with post/struts in fencing including cutting to tops and end to shape , drilling holes,notching for wire, wind ties for roofing etc complete all as specified and directed.

S&F MS bars 10mm dia and over, cut to length, bent to shape required for securing mesh with post/struts in fencing to posts complete all as specified and directed.

S&F for mild steel screw bolts (machine made)5 to 10 mm dia with hexagonal or square heads at one end and screwed the other end complete all as specified and directed.

fixing only galvanized chainlink fencing including line wires, any mesh,size and type to MS posts complete all as specified and directed by Engineer-in-charge. Note: Line wires shall be measured and paid separately as "supply only".

Supply only chainlink MS galvanised chainlink fencing of any type and of any gauge. fencing.

M&L for preparation of newly plastered surfaces and applying two coat of cement base paint

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) for rough finished surface.

M&L for plain cement concrete (1:2:4) typeB2,100 mm thick finishing the concrete surface by brooming as in hardstanding

Removal of excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 above the starting point.

Sarkar Enterprises

Sayili Enterprises

Harish Enterprises

ELIEYAS TRADERS

agarwal and company

M/S OMSAI ENTERPRISES